Over 1 million tech questions and answers.

cat 6 wires

Q: cat 6 wires

I would like to know how to install a male cat 6 end on my cat 6 wire, and what tools I need.

thanks
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professionnel, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU G2030 @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 2
RAM: 8138 Mb
Graphics Card: AMD Radeon (TM) R9 380 Series, -1 Mb
Hard Drives: C: 465 GB (72 GB Free); D: 1863 GB (1708 GB Free);
Motherboard: ASUSTeK COMPUTER INC., P8H61-M LE/CSM R2.0
Antivirus: Norton Security, Enabled and Updated

Read other answers
RELEVANCY SCORE 200
Preferred Solution: cat 6 wires

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 39.2

I have 2 sets of wires on the first set there is a wire with the name gnd1 and connected to this set is vcc1 data- and data +, on the 2nd set is the same thing just gnd is gnd2 and vcc1 is vcc2 i know where they are suppose to go but i dont know exactly how to put them in...my mobo is an ASUS A8N-VM CSM and the case is a Rosewill R-5059.
 

A:USB Wires

nvm got it i think
 

Read other 1 answers
RELEVANCY SCORE 39.2
Q: wires

Hey I have an Thomson Bigpond wireless, telephone and a fax. The wireless needs a wall socket & splitter, the telephone needs the splitter w/t the wireless and the fax needs the phone and the wall and the phone has one back plug-in!!!!!!! What do i connect and where??????????????? oh btw i have 2 splitters ones not pluged in though.
 

A:wires

You posted in a forum for software problems. Suggest you use the "Report" link at the bottom of your post and request a moderator move the post to the networking or hardware forum.
 

Read other 2 answers
RELEVANCY SCORE 39.2

Hi all,

Just a small question im looking to add a fan to my comp to exhaust the heat out, the only fan i can get has 1 red and 1 black wire (about 20cm long) coming out of it, im at ends on how i would install it in the computer as i heard that fans come with 3 pin connectors or something that simply you plug into the motherboard.

Thanks for any help.
 

A:Fan- with 2 wires?

A standard fan just has the power lead (red and black), others are designed to plug on to the board and as such can be either controlled or monitored by the motherboard, these can have 3 wires.

To connect a standard 2 pin plug you can either feed it directly from one of the molex plugs using an adaptor cable or see if your board has a 2 pin power socket.

Im no expert in modding and cooling, this is based on general use of a PC.

Regards
 

Read other 4 answers
RELEVANCY SCORE 39.2

Hi
im having problems puting the little leads which come from the speaker,power button and reset button onto the mother board?
do the very from motherboard to motherboard???

Any help would be gratefull.
 

A:little wires

Hi, Yes I suppose they could, in that they might not all be used....
it depends. Can you post the make and model of the motherboard?
 

Read other 3 answers
RELEVANCY SCORE 39.2

I got AT&T Dryloop Internet a few months ago, but about 3 weeks ago my Internet suddenly stopped working. I found out later that the cord that runs under the house had been cut all the way through in a couple places; it's like someone intentionally crawled under there and cut them. Now I'm faced w/ a huge bill to get an AT&T repair person to fix it. If anyone could give me some advice on what to do or alternatives, that would be great.

A:Help! My Wires Have Been Cut

like any DSL, "dry loop" (which just means there is no voice line on the phone service) is run over copper wire. In homes, this is usually insulated and shielded wire with four interior wires called "two pair," again typically with red, green, yellow, and black. Chances are you are using the red and green. If the colors don't match, don't worry. Just make sure you connect the same wires to the same terminals.

Go to Radio Shack or your local hardware store and get an inline connector for outdoor use. Simply connect one color from one side of the cut to the same color on the other side of the cut, and all should be well.

You can splice the wires directly, but that could cause more line noise than you want.

Alternatively, just re-wire the connection from your phone box to the wall. Red to red, green to green.

Remember that phone wires are "hot" and run at low voltage, so if you corss live wires you will get a but of a wake up call -- nothing big and sure as heck not like 120V current, but stronger than putting your tongue on a nine volt.

While you are at the hardware store, you can buy a wire tester that plugs into the jack and tells you if you have the wires hooked up correctly or not. Just don't plug anything into the jack until it tests positively, and you are good to go. Crossing phone wires is not by any means the end of the world, and nothing will happen while you are testing.

If you have zero inclination to DIY, t... Read more

Read other 1 answers
RELEVANCY SCORE 39.2

I have two laptops, both are Dell. One is a older Inspiron, and the other is an XPS. I have dialup internet, and the Inspiron has a dialup modem, and the XPS doesn't. What I have to do to get internet is network with a Ethernet cable, one from another. The Inspiron doesn't have a Wireless Modem built in, but I have a USB card for it.
What I have to do for internet as it is, is connect the dialup with the Inspiron, and with the Ethernet cable, I have internet with the XPS.
What I want to know is if it is possible to use the Inspiron to create a Wireless network that has internet capability for my Dell XPS to connect to the dialup wirelessly throughout my house.
If this is possible, how do I go about doing this?

Thanks
 

A:Getting rid of some wires...

Read other 9 answers
RELEVANCY SCORE 39.2

Hey its my friends first time building a computer, but to am unsure what advice to give him...he just aquired all the parts for the comp he is building, and he told me that there are two wires sticking from the front of the case that hypotheticly should be plugged into the motherboard, hes using an abit AI7, and he consulted the manual and it doesnt specify a place to put these wires, one wire says "Ground -5V" and the other "Ground +5V"...if any one has any ideas on whether these are significant wires and where they need to be connected, or whether they need to be connected at all please leave a reply all and any suggestions will be appreciated.
 

A:where do i put these wires! HeLP!

Read other 6 answers
RELEVANCY SCORE 39.2

Hey I have an Thomson Bigpond wireless, telephone and a fax. The wireless needs a wall socket & splitter, the telephone needs the splitter w/t the wireless and the fax needs the phone and the wall and the phone has one back plug-in!!!!!!! What do i connect and where??????????????? oh btw i have 2 splitters ones not pluged in though.
 

A:Wires????

I think you just need to us multiple outlet splitter, but perhaps some one else knows more about it.
Vicks
 

Read other 1 answers
RELEVANCY SCORE 39.2

Hello everyone, I was wondering if anyone could tell me what wires I need to 1) transfer video from my digital camera to my laptop, and 2) connect my camera to Ustream?

Camera - Canon Vixia Hg21
Laptop - Compaq Notebook CQ 70 - 120 US w/ Windows Vista

This has become a desperate situation and has driven me up the wall. There's no firewire port to speak of on my laptop or camera, and it none of the wires it came with help with either of these things.
 

A:What Wires Do I Need?

Read other 7 answers
RELEVANCY SCORE 38.8

I'm currently in the process of creating a 15-17m long cat5 ethernet connection between two 10/100 hubs. Only problem is, after connecting both ends with the RJ45 connectors and plugging one end into the uplink port and the other into the other hubs standard port I am getting constant collisions. My HUBS manual refers that this is due to faulty wiring however I've checked both ends of wire with the ethernet tester which has verified that all 8 pins are connected with no non-parralell wires! Could another problem have caused this, I've heard that pushing the wires to far into the connector can cause problems and by the looks of it I have......
 

A:Help me Crimp my Wires!!

Normally to connect 2 network devices, you'll need to use a crossover cable. Some network devices have uplink ports that contain an internal crossover allowing a standard patch cable to work. You may want to try creating a crossover cable and see if that solves your issue.

Check this HOWTO(littlewhitedog.com) on how to make crossover cables.
 

Read other 2 answers
RELEVANCY SCORE 38.8

I am trying to get the front usb's working on a K7VZA motherboard without success. the wires from the case are single and are coloured 2 reds 2 blacks a blue green white and yellow. the white has 1-D on it one red has 1 + D blue is 1 + D and the black is 1 ground. green red yellow and black all have the number 2 on them the other marks are the same as the 1's. Ive tried starting from pin 1 r red white blue black and left pin 1 red yellow green and black can't get it to work though I did get the message on one port that a devise wasn't working. Anybody help?
 

A:Usb2 wires

There is no point in trying the wires randomly. You will end up with a fried USB device.

Look up the pinout of the USB header for your motherboard that will tell you what signal goes to what pin. It should be somewhere in the manual or on the manufacturers website.
 

Read other 2 answers
RELEVANCY SCORE 38.8

http://cableorganizer.com/wire-loom/ this are the best i have seen.
 

A:No more ugly wires

you could buy that, or you could get something much similar from the local hardware store for much cheaper.
 

Read other 14 answers
RELEVANCY SCORE 38.8

Hi,

I have a block of office where by mistake the ethernet cables where cut by the construction guys.

However, on the side of the HP switch (in our server room) the wires are still connected - since we don't know exactly which wire terminates where.

Does that cause any kind of issue or represent any risk?

Thanks
 

A:Ethernet Wires Cut

As long as you don't mix power or telephone cables with the cut wires, there's no significant risk. Time to start fixing cables.
 

Read other 3 answers
RELEVANCY SCORE 38.8

Do any of u kno how to wire a internet wall hub????
Edit: theres a pic of it

im clueless

http://i539.photobucket.com/albums/ff355/rangedfatk/100_6173.jpg
 

A:Anyone Know how the wires will go for this thing???

CAT5 Cable Wiring Diagram

HOW TO MAKE YOUR OWN CAT 5, TWISTED-PAIR NETWORK CABLES
 

Read other 1 answers
RELEVANCY SCORE 38.8

I have a small home network setup and running well.

netgear rp114 router
2 desktops
1 laptop
and a cable connection

I'm trying to research cutting the cat5 cable on the laptop and setting me free to use within any room in the house rather than being locked into the kitchen table.

Questions

I'm I locked into staying with netgear or is the manf. not important?

Is a wireless connection much slower than a hard wired connection?

What is a fair estimate of distance allowed by a wireless connection?

If I plug a hub into one of the ports of the router is this the best way to expand the number of open ports?
 

A:Attempting to cut the wires

Read other 6 answers
RELEVANCY SCORE 38.8

Hello everyone! So I have an HP Notebook g2 and recently the part of the metal that connects the monitor part towards the keyboard and everything else was destroyed. No problem however since I could still use it. However, after a while the monitor had stopped working (or rather it is faint and I can see it if I flash a light over it but barely), when I looked into the wires that were hidden where that piece of metal once was some of the wires were cut and it seems they will no longer work. My question is  what are those wires, and what can I do to fix it? My warrenty already expired so I just want to buy anything I need to before sending it to a friend. 

A:My monitor wires are cut...

Hi, I've got no idea what is your machine. Please use the following instructions to find out the model/product of your machine:  http://support.hp.com/us-en/document/c00033108 Knowing your machine, I may be able to send you part list and you can work out what is it. Specially what is the metal part which I have no clue at all.Regards.

Read other 1 answers
RELEVANCY SCORE 38.8

this is my first build and it would be great if some one could help me with the wires. this has been a very frustrating build because a friend of mine was suppose to be here to walk me through it, but will not be able to due to some personal issues. i now had all these parts and had to learn some what on my own. i was able to install the cpu heat sink onto the mobo, install the mobo into the case, install the power supply into the case, as well as the ram and graphics card. i did have some problems with installing the mobo and im HOPING i did everything right.

now i need to get to the wires to make sure everything was installed correctly then move onto the HD/ DVD brn.

any help would be great. im hoping to find some one who has the time and can meet up on AIM and walk me through. thanks.

CASE THERMALTAKE VL8000
MOBO GIGABYTE GA-H55M-S2V H55 1156 R
VGA PNY VCG98GTEE1XPB 9800 EE
PSU COOLMASTER RS-460 PSAR-J3 RT
CPU INTEL CORE i3 550 3.20G 4M R
MEM 2Gx2 GSKILL F3-12800CL9D-4GBRL
HD 1T HITC 7K 32M SATA2 0F10383
DVD BRN ASUS DRW-24B1ST
 

A:help with wires (first build)

Read other 11 answers
RELEVANCY SCORE 38.8

i have a wireless router and two wireless cards for two computers. can i connect my cable modem to my router transfer the connection to both machines.
if so how? im really stuck heh
 

A:Networking with no wires. can it be done ?

I'm trying to understand what you want. If you have 2 cards already for 2 computers you don't need the cable router unless you are saying tha the cable router is an adsl modem router.

Can you give us a little more detail please? Is the wireless router a router or a adsl router?

What is your overall setup?

WB
 

Read other 3 answers
RELEVANCY SCORE 38.8

Hello,
I am pulling my hair out and now I am going to pull the wires out on the 'puter one by one! *grin* Seriously, I have spent all day working on this and I am at wit's end.
First off let me say I ran adaware............it will not remove everything I want even when I tell it too after the reboot if necessary. Secondly, Spy Bot supposedly took off its junk but.........it still keeps coming up with DOS Exploit even though it give a green check and says removed. grrrrrrrrrrr

Last........just for giggles AVG Shield just told me something about TrojanHorse out of nowhere and scared me half to death. I told it to heal. These are all current with there updates also. This is for WinMe and yes......I know its not the best thing in the world but it is what I am stuck with.

Can you help please............
Thank you!
Here is the latest log.

Logfile of HijackThis v1.99.0
Scan saved at 2:31:04 PM, on 2/15/2005
Platform: Windows ME (Win9x 4.90.3000)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\PROGRAM FILES\GRISOFT\AVG6\AVGSERV9.EXE
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\PROGRAM FILES\GRISOFT\AVG6\AVGCC32.EXE
C:\PROGRAM FILES\MOTIVE\MOTMON.EXE
C:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\WORKS SHARED\WKUFIND.EXE
C:\PROGRAM FILES\MSN APPS\UPDATER\01.02.3... Read more

A:Help! Gonna rip its wires out..one by one!

Read other 14 answers
RELEVANCY SCORE 38.8

I got this at a yard sale for FIVE BUCKS !!
It had a dent in the top of the case in the shape of a fist ! ( )

I need to know how to hook up all those wires to my motherboard.
Here is what I have ....
E MAX V770
P4 2.8 GIG
80 GIG Harddrive
1 GIG memory

I think the Motherboard is a ..

645E Max-U
MS-6547 (v2.1) ATX Mainboard
Version 2.2
G52-MA00646
I need to know where to hook up the
HDDLED, PWRSW,RESETSW,
Also 1Ground , 1+D , 1_D , 1VCC
2Ground , 2+D , 2_D , 2VCC
And I can't see a place for the case speaker ??
here is a link to the motherboard Click on U.S. and you should be able to
download the manual.(hope this works)
http://www.msi.com/index.php?func=downloadfile&dno=3572&type=manual

Any help I ccan get is greatly appreciated

Thanks to all
 

A:Motherboard wires ?

Read other 11 answers
RELEVANCY SCORE 38.8

Take a look at this image

I have two similar headsets like these.

Headset A: I play a game that requires for me to hear where a gun shot is being fired from so I can't use this one. NO malfunction

Headset B: Incoming audio I can't hear because the wire for it got messed up somehow

Solution: Is it possible for me to cut the INCOMING AUDIO wire "green" I think, on both Headsets, strip them down from the black layer, and then tie the wires together? I've heard of people doing this but wasn't sure.
 

A:Connecting Wires

You could probably solder them together. But keep in mind inside the green wire there is more than one wire.
 

Read other 2 answers
RELEVANCY SCORE 38.8

vcc2 ground2 data2 data2 the motherboard is a k8v se deluxe can anyone tell me what pins these go to the computer wont power up and it is driving me crazy... literally.
 

A:Wires to hook up, where I don't know

What are you actually trying to connect onto the motherboard?
 

Read other 1 answers
RELEVANCY SCORE 38.8

title says it all. i was messing around with electric sheep the screen saver application and i had been hearing my second hdd shutting off and turning back on which used to happen to me like 8 months ago but I hadnt seen it since then. So the hard drive shut off and the front led's started to flicker and my temp gauge went blank. my current window said (not responding) and I started to smell the worst smell ever. burning electronics

I looked to the open side of my computer the left side and saw smoke barreling out so i immediately pulled the power cord out. after the smoke cleared I panic'd and when through everything i thought could be wrong.

I unplugged the hard drive and thought it might be that since I had trouble with it before. I unplugged the dvd drives just to be on the safe side and causiously turned it back on 5 hours later and again, it began to load windows xp but a few seconds later I smelt the smoke again and pulled it back out.

I did notice that one of the issues was the flickering led on the front of my computer so i opened the panel and examined the exposed cables on the front which were hot to the touch which isnt normal. upon taking the back panel of my case off I noticed the wire leading to the front led was all bubbly and fried. the cord had soldered itself to 3 other wires (one being the temp gauge).

so now I know the effect but where is the cause? is this a problem with my power supply or was it a faulty cord? i mean its worked ... Read more

A:Smoking wires

It sounds like your power supply is faulty. Chances are really good with that much voltage/current going through the board, enough to melt a wire coming off the LED header, that your board is toast as well. You might get lucky, though. I've seen a power supply melt it's wires (well, they actually caught fire) and the motherboard survived.
 

Read other 4 answers
RELEVANCY SCORE 38.8

Hi. I recently opened up my PC to check on some connections, and in order to get at them I took out my TV tuner card. I discovered, much to my amazement and shock, that the Cable TV coaxial cable was "buzzing". It seemed to be vibrating slightly, and I felt a tingling sensation on my finger, as if there were some electric current running through the cable that was strong enough to be very noticable, but not dangerous. This was on the outer sleeve. I took the cable by the plastic coating to try to put it back on the TV tuner's jack, and the inner "spike" made a small spark when it touched the tuner's jack. Now, I know that there is obviously some current running through a cable wire to transmit the picture, but I have NEVER seen a wire with this much electricity, and am pretty "freaked out". I'd like to know what this could mean, and what to do about it. Thanks!
 

A:Buzzing wires, help please!

This is a symptom of an improperly grounded cable system. My advice to you is to contact your cable provider and get it check into.
 

Read other 2 answers
RELEVANCY SCORE 38.8

ok today i just got a brand new serial ata 300 aka serial sata 2.i want the uv green wire instead of that red one.i also have another 250 gig serial sata 1.5 gb the older model i need the uv green wire for that so i can replace that red wire as well.anyone know what site i can get these wires than.
 

A:Help finding these wires

you mean like this?

http://www.supermediastore.com/uv-sata-cable-19-inch.html

Google is your friend.
 

Read other 2 answers
RELEVANCY SCORE 38.8

Hi! I'm planning to add another hard drive for my computer, and making the second drive my primary drive for my desktop. And I notice that there are wires named p1,p2,p3...etc. And I dont know the wire to use to power up my hard drive. Do those wires has a designated function example is the p4 which is connected to my hard drive. Or I just need to use any of that wires? -Hp Pavillion -p7-1010d

Read other answers
RELEVANCY SCORE 38.8

Hey guys,

So, got all my new parts, and assembled my new computer. Its working on the Windows install now!!! But, I don't know how to hook up the front USB or Speaker wires, cuz they don't match quite right w/the book. I'll tell you what they say on the case, and what the Gigabyte book says, and maybe someone can help me??

It is a Gigabyte M61P-S3 board, and a black case (no clue what it is really!...)

Here we go:

USB Case - GROUND, +D, -D, +VCC (I have two of these, and two USB ports on the front)
Speaker Case - Return R, Return L, Spkout L, Spkout R, GROUND, MIC IN, MIC BIAS

USB Board - Power (5V), Power (5V), USB DX-, USB Dy-, USB DX+, USB Dy+, GND, GND, NC (There are three of these)
HD Speaker Board - MIC2_L, GND, MIC2_R, -ACZ_DET, LINE2_R, FSENSE1, FAUDIO_JD, LINE2_L, FSENSE2
AC97 Speaker Board - MIC, GND, MIC Power, NC, Line Out (R), NC, NC, Line Out (L), NC

Thanks for the help!!
 

A:Need help matching wires

Link for USB headers http://www.directron.com/installusb.html
Link for front sound headers http://www.hardwaresecrets.com/article.php?id=93
 

Read other 1 answers
RELEVANCY SCORE 38.8

I have a Gigabyte G-VAX MB but can't find the manual to connect the case wires. The motherboard is virtually impossible to read and the PDF manuals I've downloaded are not much help either. Could someone help me with this, maybe a good blown-up diagram? My eyes ain't what they used to be!

Thanks,
Gary
 

A:Cases wires for G-VAX

Gary777 said:


My eyes ain't what they used to be! Click to expand...

There's probably quite a few here at TSG with that problem. I purchased a good pair of reading glasses, a decent magnifying glass, & a small but very bright LED flashlight. It also helps if you have good natural light from a window. I often use the kitchen counter as a work area. Plenty of natural & artificial light available.

Having a patient helper to assist with holding a light & has younger eyes is a plus.

Getting a respectable blowup MB pic will probably require considerable Google searching.
 

Read other 3 answers
RELEVANCY SCORE 38.8

Okay I will detail this fully.. Yesterday I had a wireless-g connection from my basement to my bedroom. Today I took 100ft. of Cat5e and ran it from an internet slot on my wireless router to my PC's ethernet port..

However the PC upstairs doesn't detect the signal. My router does have a green light on the internet slot that I plugged the cable into but I must be missing something on my upstairs PC. I installed my onboard nVidia ethernet driver but still don't get a connection. Maybe there's something I don't know how to do regarding a wireless router's Wired connections, does the PC need the routers software installed or something?

Confused
III III III III III III III III

thats how i crimped em.. both sides of the wire

oh and i went to CMD.. ran IPCONFIG /release, then IPCONFIG /renew

i got this on the renew step..

"Error occurred while renewing interface Local Area Network Connection 2, unable to contact your DHCP server. Request Timed Out."
Also my only network connections listed is the onboard ethernet.. and it shows that I have a 100Mbps connection through the wire so my wireless connection is gone.. but I still cannot access the internet..
 

A:Going from Wireless to Wires.. Need Help

Read other 11 answers
RELEVANCY SCORE 38.8

Hey

I figured out how to make my fans go slower by cutting yellow and black and leaving red, then leaving the black disconnected and connecting the black to the yellow from fan to connector.
Is it possible to make it go even slower?

Second thing is I also have a 2 pin fan, is it possible to mod that as well to go slower?

~Kilomil
 

A:Modding wires on fan

A 120ohm resistor will slow a fan down enough to make it almost silent!!
 

Read other 9 answers
RELEVANCY SCORE 38.8

with regards to case wires are RED positive?
im fitting the case wires
blue+red - + ?
black+white + - ?
red+white + - ?
red=+
black=+
white=-
blue=-

am i right?

thanks
 

A:case LED wires...

Read other 8 answers
RELEVANCY SCORE 38.8

it wont let me start to boot it says cmos wrong then...

ok so just got my mobo working but it starts on the BIOS and it says:

CMOS display type wrong:
F1: RUN SETUP
F2: Load default values and continue

On either one i choose it asks for my current password but i never had one for setup or log in????!!!!!

whats happened i booted yesterday before i took the mobo out and it was fine?

is the anything i can change e.g processor, BIOS(i have loads of spares) if i have to change BIOS how do i do it?


cheers for any help in advance
 

A:which wires go where on my mobo?

Read The Friendly Manual

And what has the BIOS password got to do with plugging wires?
 

Read other 3 answers
RELEVANCY SCORE 38.4

have an asus p4p800-e deluxe mobo and i got the demon x atx case. now i want to hook up all those little wires from the case that go to the front usb and other stuff to the thing that says panel on the mobo yet im not exactly sure what im doing and if im doing it correctly. does anyone know where i can get instructions to connect all of them correctly? thanks
 

A:front panel wires

Read other 8 answers
RELEVANCY SCORE 38.4

Hello. I am in the process of building my 1st computer and I currently have 7 case wires not plugged into the motherboard. They are labeled:
Mic-In
Mic-Out
L-In
L-Out
R-IN
R-Out
Gnd

I am pretty sure that these are the Front Audio connections, however my mobo manual doesn't clearly explain where these should be hooked onto the motherboard.

Thank you for your help and your patience with my lack of knowledge.
 

A:Case wires....needed? HELP!

There may or may not be a place to plug these in. What is the make and model of your motherboard.
 

Read other 3 answers
RELEVANCY SCORE 38.4

Can someone tell me where is the speaker wires needs to be inserted from these ports in CPU, given in picture?
I have Creative 5.1 520 Speaker Set, which has three cables out from Woofer-
1. Orange
2. Light green
3. Black

Please tell me where to insert what?

1st is mic
2nd - L-Out
3rd - L-In
4th - SS-Out
5th - CS-Out
6th - RS-Out

A:Can someone tell me where is the speaker wires needs to be inserted ?

Your speaker cables should be colour-coded to correspond with their respective phono sockets.

How To Connect 5.1 Speakers To Your Computer

Read other 9 answers
RELEVANCY SCORE 38.4

I am thinking of buying these speakers: http://www.ebuyer.com/customer/prod...2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=55378.

My issues are mainly with the cable, which is apparently quite short. I also want to wire it all neatly around the room. This would probably mean cutting the cables and putting a new bit in. Would this affect sound quality?
 

A:Splicing speaker wires

Read other 16 answers
RELEVANCY SCORE 38.4

I need to run a CAT5 wire from a router to two other rooms.

After I do the first run, can I use a splitter at that point to make my last connection in the farthest room? Or do I need to run two seperate wires from where the router is to each room.

Thank You
 

A:Hardwire - Running wires

Read other 14 answers
RELEVANCY SCORE 38.4

I just installed an excellent new PSU in my Optiplex GX620 which had totally inadequate one. Now my 2 HDDs are running at good temps.

My dilema is....the new unit has a gazillion wires I will never need and even trying to bundle them leaves glut in this full sized tower, and, I think, reduces air flow. I would like to cut the needless ones and seal the ends of each.

Will anything or anyone die if I do this? I already know to turn everything off and let the PSU settle before I attempt anything. If I do.

I did email Antec who makes the unit but have yet to hear back.

Thanks for any feedback on this,
Jill
 

A:Removing Needless PSU Wires?

Read other 16 answers
RELEVANCY SCORE 38.4

Building a new computer
Okay everything came and I am almost ready to start building the computer. I was told if I needed any help that you guys would be able to help me. So here goes.
Like I said before I'm not afraid of anything but the power supply cords. There is awire from the from part of the case that looks something like thisIt's a striped wire with 4 pronges at the end of it that plugs in somewhere. Each one has something written on it:
1. Power Led (the largest)
2. HDD Led
3. Reset Led
4. power SW
It des not say in the mobo book where these go but I'm pretty sure that I need to plug them in somewhere.
In case you need it, this might help lol. This is where you can find the mobo. I know it's not a great one but for a 9 year old I thought it might work. If not I can always gett another one. It was very inexpensive not that money is not object but I figured if I screwed it up I would out less than $50.00.

http://www.kobian.com/products.php?productid=65

Thanks Jac
 

A:Case wires and mobo

Read other 8 answers
RELEVANCY SCORE 38.4

delete this thread please. wrong section
 

Read other answers
RELEVANCY SCORE 38.4

ive heard this is possible if so how fast is it and what do i need to facilitate it i know it is very slow
 

A:using electirc wires for network

Read other 7 answers
RELEVANCY SCORE 38.4

Dell Inspiron 2200 has a Dell 1370 wireless card installed. Unbale able to connect to WAP with little or no signal sitting 1 Foot away from WAP. Discovered the wires connected to the wireless care have been cut just below the screen. Need help in finding the wires that connect to the wreless cad and were they connect behind the laptop screen. Thanks

A:Cut Wireless Card Wires

Are they really cut or do they just stop there. The reason I ask is those wires may be the antennas for the wireless card. They don't always go up into the display and they just dead end. They look like wires but are actually antennas. Is there actually bare wires at the end or are they covered in heat shrink wrap? If you could take a picture and post it it may help.

Read other 5 answers
RELEVANCY SCORE 38.4

Hello! So recently ive decided to ditch my case, and put my computer on wood! Don?t ask why, i have weird taste. So the computer is a inspiron 660s mini tower. No added upgrades, just the stock mini PC. So after securing all the parts onto the wood, and plugging everything in, i went to turn it on. (I took the button that turns the PC off the case(also i know very little about computers)) but it didnt turn on! Yes the computer is receiving power and everything is working perfectly, but the button itself is not turning on the computer. Another thing is that there used to be two wires that were connected to the case, and i took those wires off , because it look like they were connected to nothing! They are connected to the mother board but im not sure what part of it! Hopefully you will be able to tell from the pictures i took. If you have any other questions, please ask!! Need this fixed asap! (Also yes i tried to put conductive materials on the spears that sre poking out that receive power, i think i did it right, but im not sure.) and also i cant use the Syslnfo due to me not being able to access my computer.
 

Read other answers
RELEVANCY SCORE 38.4

Hey all.

The other day I thought I could smell burning plastic. So I shut down the comp and had a look. The two wires shown below have melted their covering plastic. They go to a front case fan (zalman zm f1 at full speed).

Melted Plastic

The wires come from this connector which comes from an Antec True480(PGB) PSU. These two wires then finish off at a 3 pin male fan connector. This then goes into the 3 pin female fan connector from my zalman zm f1.

Connector

Could anyone please tell me why the plastic has melted. Obviosuly the wire itself is too hot which is melting the plastic, but why is that wire getting too hot? I have only been able to smell burning plastic once. The wires now don't seem hot at all, and the computer and front case fan works fine. But it is bothering me, something must have gone wrong?

In case you need em my specs are

amd athlon xp 2700+ (2.16ghz)
1gb ddr 333 pc2700 ram
msi 6777 mobo socket A
msi 6800gt agp gpu
120gb seagate hdd
dvd rw
dvd rom
antec true480 (pgb - uk version)

Cheers.
 

A:Melted Plastic On Wires (PSU)

Is the gauge smaller on these than the ones of the fan?
(In fact, what's the gauge of the wires)
How many watts is the Zalman using?
If the contact is poor at one end or the other, the wire is making more resistance, and then heating.
 

Read other 5 answers
RELEVANCY SCORE 38.4

i was wondering what type of cable can connet to a wireless linksys router
it the antana plug im trying to extend my range of my wireless connective so i can get it all over my house and not half of it
 

A:wires for a wireless router

I'm trying to help, but your grammar is poor and I can't understand what you're trying to say. I assume you need a repeater or or wireless extender.
 

Read other 3 answers