Over 1 million tech questions and answers.

BSOD on startup with verifier active, computer also restarts itself

Q: BSOD on startup with verifier active, computer also restarts itself

Computer freezes sometimes when playing DOTA2 or CSGO. Also, computer sometimes restarts itself but fails to boot into windows and goes into a reboot cycle for 3 or 4 reboots until it is able to boot back into windows. I turned on verifier and received a BSOD.
Specs:
i5 2500k
Gigabyte z77-ds3h
WD caviar blue 500gb
crucialx 2x4gig ram
evga 560ti
rosewill 600w powersupply

RELEVANCY SCORE 200
Preferred Solution: BSOD on startup with verifier active, computer also restarts itself

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD on startup with verifier active, computer also restarts itself

First of all, I want to warn you that Rosewill PSUs utilize very cheap materials. It is not uncommon to get a bad PSU from them that will die suddenly or cause instability not long into their life. Do not skimp on the power supply, as it is the most crucial element in a PC for stability. Save up for a high end model of some reliable brand names. Good article to read up is here as well as here for a database. Avoid economy versions of any brand, as they most likely have just as cheap of components as Rosewill does.

Anyways, whether it was actually causing your problems or not, Driver Verifier was catching the Gigabyte EasySaver driver doing something funky. Motherboard utilities and software are gimmicky and buggy, and are prone to causing BSODs and other symptoms. It's best to do a cleanup of all of them, leaving only drivers that are specifically designed to provide functionality to a component (e.g. LAN drivers for LAN, audio drivers for audio, etc.). Any driver that is designed to give a "boost" or some other improvement should be avoided. You may need to use something like CCLeaner or Driver Fusion (both free) to entirely remove all this software, since often even their uninstallers are buggy and leave stuff behind.

Once that's all done, test for stability. If it's ok, congrats, otherwise turn Driver Verifier on again, restart, let it crash and send crashdumps.

Oh, and it goes without saying, if you have any overclocking going on, reset to factory defaults. In fact, check your BIOS settings and set to safe defaults, since often mobos will have normal presets that are actually slightly overclocked. Of course, it also goes without saying to update your BIOS.

Read other 1 answers
RELEVANCY SCORE 69.2

Hi, whenever I turn my computer on, it gets to the screen where it asks you if you want to boot in safe mode, boot with last known good configuration, and etc. No matter which option I pick, the computer BSODs while the computer is loading (for example, I'll see the BSOD when the Windows XP logo and loading appear).

I can't read the BSOD message because my computer restarts too quickly.

I wasn't doing anything significant when it first happened, I was just browsing the internet, when my computer BSOD'd. Everytime I tried to restart the computer after that, whether in safe mode or regular mode, it would BSOD again while starting up.

I'm not sure how to troubleshoot this so I would appreciate some help on how to find a fix for this or find out what's causing this.

Thanks.

A:Computer BSOD's and Restarts On Startup

Here are my specs:

CPU: Newegg.com - Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor BX80570E8400
Motherboard: Newegg.com - GIGABYTE GA-EP35-DS3L LGA 775 Intel P35 ATX Intel Motherboard
Video Card: Newegg.com - GIGABYTE GV-N450OC-1GI GeForce GTS 450 (Fermi) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Sound Card: Newegg.com - Creative 70SB073A00000 7.1 Channels 24-bit 96KHz PCI Interface Sound Blaster X-Fi XtremeGamer
Memory: Newegg.com - CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400C3
Power Supply: Newegg.com - CORSAIR CMPSU-750TX 750W ATX12V v2.2 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Case: Newegg.com - COOLER MASTER Centurion 5 CAC-T05-UB Black /Blue Aluminum Bezel , SECC Chassis ATX Mid Tower Computer Case
Hard Drive: Barracuda 7200.7 SATA | Seagate
DVD Drive: Product Details | Sony Storage Support
Operating System: Windows XP Professional Service Pack 3
Monitor: Newegg.com - Acer X223Wbd Black 22" 5ms Widescreen LCD Monitor 300 cd/m2 2500:1
Keyboard: Call 714-662-4959 Party&desc=Refurbished Windows 98 Keyboard
Mouse: OCJ339 Dell Mouse
Speakers: Broken
Microphone: Broken and $10

Read other 6 answers
RELEVANCY SCORE 67.2

Before I start, every blue screen I get is a irql_not_equal_or_less and I have run memtest on my ram cards with no issues. Also I am using 64bit Windows 7.

For a while now I have been having some problems with blue screens on my computer when I am turning it off or into sleep and sometimes during startup. Well I mostly fixed it by updating multiple drivers on my computer like my intel graphics driver. After that it really only blue screened when I tried to put it into sleep mode. Yet recently I tried re-downloading league-of-legends and every time it would blue screen near the end of the download.

Thus to fix this I searched on the windows help forum and found the Driver Verifier software on windows and used it following the instructions. Well now I am unable to get back into windows (using the dual-booted Linux OS) because it bluescreens right after I put in my login password. Then I try safe mode and my computer just turns off not booting up in safe mode either.

Basically my question is how to get my computer to boot windows up. Since I know it is very much needed, is there a way I can open or post the MiniDump files from Linux?

Since I cannot boot windows its hard to get exact computer info unless I can from Linux but here is what I can remember:

Windows 7 64bit
intel Core i5 2.5GHz
6 Gbs Ram
Sony Vaio Laptop
Integrated Graphics
Intel Graphics driver
Directx11

Please help me and if you need any info on my computer I would be happy to try and get... Read more

A:BSOD irql_not_equal_or_less on startup after windows Driver Verifier

Can you try to boot into safe mode (F8)

Then try this:

SF Diagnostic Tool - Using for Troubleshooting

Read other 9 answers
RELEVANCY SCORE 67.2

Hello,

I have recently build build my own pc. This pc has never worked stable, i've been experiencing random bsod's. Sometimes they come 20 in a row and the system is stable for only a few minutes. Sometimes, usually when I tweaked a little with the system, like increased the voltage over the ram modules or removed a network card which I didn't use, reinstall windows, the system would be stable for days before the bsod's came in big numbers again.

Today I used the driver verifier to see if the problem was driver related. When my computer would start up with driver verifier enabled, the system would crash before it could startup windows. It did however generate a minidump file containing information about the crash. The last 5 minidumps that are attached are caused by the driver varifier startup crash, the other files are due to random crashes over the past month.

My system specs:
Windows 7 Ultimate x64, Full Retail
Processor: AMD Phenom II X6 1055T Processor 2.80 GHz
Memory: 2x 2GB DDR3-1333G
Video Card: Asus Eah-5670, 512 MB
Motherboard: MSI 870A-G54 - Socket AM3 - ATX

I hope dat I have provided you with enough information. Any help on this matter would be greatly appreciated!

A:Random BSOD's + Driver verifier startup crash

  
Quote: Originally Posted by Jim Tol


Hello,

I have recently build build my own pc. This pc has never worked stable, i've been experiencing random bsod's. Sometimes they come 20 in a row and the system is stable for only a few minutes. Sometimes, usually when I tweaked a little with the system, like increased the voltage over the ram modules or removed a network card which I didn't use, reinstall windows, the system would be stable for days before the bsod's came in big numbers again.

Today I used the driver verifier to see if the problem was driver related. When my computer would start up with driver verifier enabled, the system would crash before it could startup windows. It did however generate a minidump file containing information about the crash. The last 5 minidumps that are attached are caused by the driver varifier startup crash, the other files are due to random crashes over the past month.

My system specs:
Windows 7 Ultimate x64, Full Retail
Processor: AMD Phenom II X6 1055T Processor 2.80 GHz
Memory: 2x 2GB DDR3-1333G
Video Card: Asus Eah-5670, 512 MB
Motherboard: MSI 870A-G54 - Socket AM3 - ATX

I hope dat I have provided you with enough information. Any help on this matter would be greatly appreciated!


virtually all were identical and Related to dtsoftbus01.sys Virtual Bus Driver from DT Soft Ltd. I would remove it to test.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Micro... Read more

Read other 9 answers
RELEVANCY SCORE 66.8

My computer boots fine into safe mode, but when i try to boot normally computer gives me BSOD and restarts automatically, the nvidia drivers or my GTX 460 are causing the problems.

It boots fine normally when i select standard VGA driver in device manager for my GTX 460


Things i have tried which did not help:
I have installed and tried many different versions of drivers after uninstalling with display driver uninstaller.
Installed a clean copy of Windows 7 SP1.
Tried installing only the drivers without physx, audio etc. for nvidia GTX 460.

I have attached the zip file containing the minidump and my complete system information.

A:Computer BSOD on startup and restarts, boots fine into safemode

remove driver of VGA

try this

follow this
download ccleaner from this link

Download ccsetup416 slim exe

install it only
donot run it
then download ccleaner enhancer from this link

Download CCEnhancer Multilanguage zip

run it
and press download latest
then run ccleaner now
now
in
cleaning tab
check all selection in windows and application tab
except the selection of wipe free space in windows tab
press cean now button in the right side
after that go to registery tab and press search for
then press fix all selected
then
download antimalwarebyte from this link

Download mbam setup 1012 exe

install it and run it then update it if it asked
then perform full scan to whole computer partitions from safe mode
and remove all threats

Read other 3 answers
RELEVANCY SCORE 61.2

Have had problems with bluescreens and whocrashed told me it was most likely caused by some driver.
Turned on verifier after your guide and it crashed after I went to bed..

A:BSOD, computer idling with driver verifier running

Hi there!

Seems like the crashes are caused by netr28x.sys i.e. Ralink 802.11n Wireless Adapters. I would recommend to remove to and reinstall it. Then disable Driver Verifier.

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000010, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002aa830f, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cff100
GetUlongFromAddress: unable to read from fffff80002cff1c0
0000000000000010 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
nt!RtlInsertEntryHashTable+73
fffff800`02aa830f 488b4810 mov rcx,qword ptr [rax+10h]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TAG_NOT_DEFINED_c000000f: FFFFF80000BA2FB0

TRAP_FRAME: fffff80000b9a290 -- (.trap 0xfffff80000b9a290)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=000000000000... Read more

Read other 4 answers
RELEVANCY SCORE 56.8

Within the last couple months my computer started freezing/restarting and giving me the occasional BSOD. I did a system restore (which made my TurboTax 2015 disappear) since that was the only new software I had installed recently. It didn't help.

A friend recommended I try mdsched (no errors), sfc /scannow (no integrity violations), a video memory stress test, and BlueScreenView. Googling the results of BlueScreenView (my latest was irql_not_less_or_equal and they all say "caused by driver: ntoskrnl.exe") led me here. After browsing through a few forum posts, it seems you need to see the logs. I've run the DM collector and will be uploading my logs here in a moment.

Thanks in advance for any insight/help.

A:Frequent BSOD and restarts, usually on startup

Here is my log.

Read other 1 answers
RELEVANCY SCORE 56.8

i have the problem with BSOD and my PC won't start at all, it restars after Vista loading tab and gives me that damn thing that should have died with XP> BSOD, i can see that screen only for half a second and I cant read what it says, any help would be appreciated, thanks,

Amycoll
 

A:Vista restarts upon startup BSOD

Read other 16 answers
RELEVANCY SCORE 56.8

Hi, I've got an HP Compaq 6735s and, for no apparent reason, it won't start. It was working fine last night, then I started it up normally after I got home from work today and it got to about 10 seconds into where it has the Windows XP logo and loading bar...then it briefly flashes to a BSOD and restarts. After this happening a couple times on a loop, I pressed F8 and went to 'disable automatic startup on system failure' so that I could at least read the error. It's STOP error 0x00000024.

- I've tried starting under Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Last Known Good Configuration, and even Debugging Mode. NOTHING is working. Same error each time.
- I have tried resetting BIOS to defaults. Didn't work.
- I do not have a Windows XP disc, so anything that involves that is out unless I can find someone who owns one.
- I have pictures, in-progress AMVs, homework, files for a game I've been working on...none of it is backed up. If there is a way to back all of this up before fixing my laptop, PLEASE let me know.
- I didn't download, update, install/uninstall ANYTHING before this happened. All I did yesterday was watch stuff on YouTube and talk to my friends via Messenger. The daily scan that I run on it was clean, no spyware/virus or anything at all.

Any help at all would be appreciated! I can't afford a new laptop. >.<
 

A:Laptop BSOD and then restarts on startup

Read other 11 answers
RELEVANCY SCORE 56

Hello,

My little brother's desktop PC that is running Windows 8.1 keeps going to the BSOD on every startup i do, once it restarts and goes back to desktop it seems to run fine and doesnt BSOD which is quite frustrating. I've zipped up the files needed for you guys to have a view (following the guidelines highlighted in the rules)

It started off with the KMODE Exception but now i get the Kernel Security Check Failure error.

Started off with this error;

It use to blue error on windows 7 32 bit OS so i reformatted the PC and then installed Windows 8.1 but it still BSOD on here as well. Currently running windows updates and seeing if that helps.

The System Health Report (PERFMON) when running the command in CMD as admin, i get the following error message back:

An error occured while attempting to generate the report. The operator or administrator has refused the request.

Read other answers
RELEVANCY SCORE 56

Hello,

My little brothers desktop PC that is running Windows 8.1 keeps going to the BSOD on every startup i do, once it restarts and goes back to desktop it seems to run fine and doesnt BSOD which is quite frustrating. I've zipped up the files needed for you guys to have a view (following the guidelines highlighted in the rules)

It started off with the KMODE Exception but now i get the Kernel Security Check Failure error.

Started off with this error;
UMARSHAFIQ-01_02_2015_132108_70.zip

A:BSOD Error On Startup - Auto Restarts

There is a problem device...
PS/2 Compatible Mouse ACPI\PNP0F13\3&2411E6FE&0 This device is not present, is not working properly, or does not have all its drivers installed.
Update drivers in red. This appears to be a HW issue, so please start HW testing: Hardware Diagnostics


Code:
MRVW147.sys Fri Aug 17 10:42:27 2007 (46C55F73)

MRVW147.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

nvstor.sys Tue Sep 13 01:22:00 2011 (4E6E9418)
nVidia Storage Drivers
http://www.carrona.org/drivers/driver.php?id=nvstor.sys

GEARAspiWDM.sys Thu May 3 21:55:59 2012 (4FA2E2CF)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

nvlddmkm.sys Fri Dec 7 08:32:27 2012 (50C19B8B)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

yk63x86.sys Tue Jan 8 13:43:58 2013 (50EC148E)

yk63x86.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

viaagp.sys Thu Aug 22 06:11:13 2013 (52158F61)
VIA Accelerated Graphics Port (AGP) Bus Filter
http://www.carrona.org/drivers/driver.php?id=viaagp.sys

agp440.sys Thu Aug 22 06:11:13 2013 (52158F61)
Intel AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=agp440.sys

sisagp.sys Thu Aug 22 06:11:14 2013 (52158F62)
SiS N... Read more

Read other 14 answers
RELEVANCY SCORE 56

So I had a malware/virus disguised as an antivirus the other day (It might have been a rundll32 virus), and being as stupid as I am, I accidentally downloaded it. I actually got rid of most of it with my anti-malware/virus programs, and my friend suggested I clean up my C:/ and D:/ drives. What happened after is that after it was done, my desktop restarts at startup, and it just keeps restarting. I've tried F8 and everything. Is there anything I can do to get my computer back? Thanks in advance.
 

Read other answers
RELEVANCY SCORE 55.2

Hi, I have an issue with my computer.
I run Win7 and lately I've had the problem that my computer freezes on startup - in fact, just as the first pixel of the Windows logo lights up on the screen it just won't go any further. The screen keeps saying "Windows is starting" but I can leave it like that for hours and nothing will happen.

Then I tend to press the start button and leave it for a few hours at which point it'll start as normal (complaining of course that Windows wasn't shut down correctly and if I want to try a repair or start as normal. I've tried both options and neither makes a difference - It'll start as normal.)

It also starts normally if I don't do a restart.
So the problem always happens if the computer was on, then turned off and then turned on again within a shorter period of time.

Another - and possibly related problem, is that when I work with my folders and move stuff around in them, I oftenmanage to overwork them so they will not show the files properly anymore or open them.

Solutions tried:
Reset to a previous point where I knew it worked
Insert the Win7 CD and asked it to repair
Asked for it to repair any possible problems after turning off windows incorrectly and getting the option during startup

Neither of these have worked
 

A:Computer freezes on startup but only after restarts

Run a hard drive check by going to Computer, Properties, Tools, check the box to fix errors and schedule a check on next start up
 

Read other 5 answers
RELEVANCY SCORE 55.2

hey guys. i hav an old pc its got xp sp2. pentium 4. 2 gigs of ram. like its fairly old. Its had no problems til now. i was accessing my work site, and suddenly all these error reprts popped up. like doctor watson sumthing could not start properly send error report or dont send. and this error report is for everything, py printer. my wireless router.
wat can this problem be? it does the same thing in safemode.

any help is appreciated guys
thnx.

A:Errors after startup and computer restarts

We need the complete text of each error message in full.

Read other 12 answers
RELEVANCY SCORE 55.2

Recently i decided to do some pc cleanup, disabled some startup processes i dont need and must have disabled a critical startup process or two.

i can log into recovery console but thats about the best i can do, i have the os disk but not looking forward to formatting and losing all my save files, music and what not

A:computer restarts continuously on startup

use the O/S disk and click REPAIR

Read other 7 answers
RELEVANCY SCORE 55.2

Just recently, my computer has developed a problem where it would restart constantly during the Windows XP startup (after logging in from the user select screen). However, I have now noticed that this only occurs when my ethernet cable is plugged in, and I'm connected to the internet. When the cable is not plugged in, the computer does not restart. If I start it without the cable, and then plug it in after startup, it will restart within moments.
 

Read other answers
RELEVANCY SCORE 54.8

For some unknown reason, my main computer is rebooting(i don't know if it's more like a shutdown, because it I see a blank screen, could hear the hardrives turning off, then the computer restarts and I could hear the harddrives turning on again) itself during the startup process. It reboots/shutdowns right after the windows loading screen and before my desktop actually shows up.

I've turned off the "Automatically restart" feature and get the following error message:

"The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000022 (0x00000000 0x0000000)
The system has been shutdown."


The computer works fine in safe mode.



Specs:

Windowns XP Pro
AMD XP 2200
768MB DDR RAM
120GB and 40GB Maxtor harddrives
Radeon 9800 Pro
Samsung DVD Burner
Liteon 16x DVD Drive
450W Power Supply



thanks!

A:Computer restarts during startup (software issue?)

tap f8 when booting and from the options try
last known good configuration

Read other 5 answers
RELEVANCY SCORE 54.8

Hello,When I turn on my computer, it shuts down and restarts, sometimes multiple times. Sometimes, a screen appears that indicates that new software may be causing this.Eventually, the computer then starts and I can proceed to open and use various software programs.However, it will occasionally shut down and restart while I am working on something. There is no standard situation that seems to cause the shut down. Sometimes, the screen just turns fuzzy and I have to turn in off and restart it.Also, a blue screen has started to appear that says win 32k.sys was the problem and includes the message:PAGE_FAULT_IN_NON_PAGED_AREAI have also received a pop-up window that said there was a problem with Generic Host Process Windows 32. It was one of those pop-ups that ask if you want to send a report to Microsoft.I have run adAware, Norton, and ccleaner. I have uninstalled Norton.The problem started a few days ago.(Please note: I originally posted this in the Windows XP forum but was advised to repost it here because the original Hijack This log was from an old version of Hijack This.)SpecificationsWindows XP Pro2002Service Pack 3AMD Athlon 64 x 2 dualCore Processor 5600 +2.90 GHz 1.96 G of RamHere is the Hijack This log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 12:10:33 AM, on 1/27/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\... Read more

A:At startup, computer shuts down and restarts, win 32k.sys message

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 54.8

Hello,

Any help with this problem would be greatly appreciated.

Let me start by admitting I am a complete computer novice!

I recently accessed an email sent to my account from what I thought was my bank. Upon opening the email I realised it was spam. A few minutes later my computer had completely frozen. Nothing helped. CTRL, ALT and Delete did nothing sadly. I switched it off by holding down my power key. Upon rebooting a few minutes later, my computer reached the ACER startup screen. It just keeps turning itself off and on again.

The start up screen will tell me to wait (If I press F2), or might beep (up to 5 times), but always turns itself off again. I cannot get past this point. This means I cannot use a recovery disk of any sort.

I have an ACER 5333 that I only recently purchased. I don't know if the spam email is a coincidence or not. Is this likely to be a hardware/electrical problem (I think not??), or is it a virus/spyware?

Please help... All the technical support I can find on the web involves actually being able to boot up the setup screen!

Many thanks (eagerly awaiting replies!).

A:Computer keeps booting up to startup screen and restarts

Reboot or turn on the machine. As soon as you see your machine's name logo splash screen keep tapping F8. Go to "Advanced Options" or "Repair Computer" Select your language then "Repair Your Computer" An installation of Windows should be detected after that select "Next"

If that does not fix the issue. Do the same as before go to Next again go to command prompt type in

Code:

CHKDSK C: /R

I would also scan your system with your current anti virus software, a full scan.

Read other 2 answers
RELEVANCY SCORE 54

Dear Friends,

I am having a problem of Login Process Failed whenever I start my laptop and the computer restarts automatically.

Following is the crash dump for the computer
________________________________________________________________________________________

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\SHANU.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: \\Minixp\c\WINDOWS\system32
Windows XP Kernel Version 2600 (Service Pack 2.2096) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_rc1.040311-2315
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x80559a40
Debug session time: Tue Nov 10 23:03:30.390 2009 (GMT+6)
System Uptime: 0 days 0:01:16.900
Loading Kernel Symbols
...............................................................
...........
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* *
******************************************************************************* ... Read more

Read other answers
RELEVANCY SCORE 53.6

Greetings and thanks in advance for your help.

Once a month I get a kernel error when I come to my Dell computer which I leave on all the time. It is a power error that I believe is caused by my external sound card that the monitors are hooked up to (this is only a hypothesis).

Anyhow I read up on Verifier that you can run to check drivers especially 3rd party non-microsoft drivers. So I went into the program and then check off that I am a developer and asked to verify all the non-microsoft drivers and uncheck two other drivers that I was instructed to in an online article.

Next thing that happens is that it asks you to restart and I do and then I get blue screen. I tried several other times and got blue screen each time. The screen flashes so fast I couldn't get the error code.

I ran in safe mode went into VERIFIER and then deleted all settings restarted and then it worked.

Does anyone have any ideas to what has caused this issue? Your input is apprecited.
 

A:Verifier Issue: Blue Screen after running Verifier in Windows 7

It's doing exactly what it's supposed to. Any driver problems will cause a bug check, aka blue screen or BSOD.
You can disable the automatic restart if you want it to stop on the screen so you can read it, or read the info in the Event Viewer, or run the dump files through the Windows Debugger.

Tp disable the automatic restart:
Click Start, type systempropertiesadvanced, then press Enter
Click the Settings... button under Startup and Recovery
Uncheck Automatically restart in the System failure section
OK back to the Desktop.
 

Read other 1 answers
RELEVANCY SCORE 53.6

As above my computer freezes up, my graphics card failed a few months ago so I bought a new one. I installed the latest nvidia drivers for it and downloaded and installed them. When I tried to play any games Left 4 Dead or MW2 through steam it would freeze up and pix-elate and then my computer would restart.
I figured it must have been a dodgy graphics card, so I bought a new one. I used the latest drivers and the problems persisted, So I used the drivers from the disc and everything was ok. Until last week when I started having problems again.
What happens now is the screen will freeze and nothing will work on the keyboard and you need to manually reset. If I use the latest drivers it will pix-elate and switch off itself.
I have had the RAM checked that's ok, the temperatures have been tested and are fine. I tried another graphics card and removed all drivers and didn't work.
I have also formatted the computer which has made no difference.
Is there anything else that it could be, possibly processor, PSU or motherboard or could it be the power source in the house. I don't want to replace things if they are not faulty.
If you require any computer spec or error reports if they come up I will post them later for you
 

A:Computer freezes and then restarts with a quick blue screen before startup

Give us your system hardware icluding make and model. Also...

How to find and post your Minidump Files:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor and don?t Zip each one individually.
 

Read other 16 answers
RELEVANCY SCORE 52.8

I've been having problems with mostly memory and driver related issues, crashing frequently in both games that require lots of resources and games that shouldn't require much at all. I enabled Driver Verifier to see if I could discern what the problem was, but now it crashes on startup. Not sure how this thing will work but there's plenty of crashes in the zip, I assume. I'll do my best to provide additional information if needed.

I should also note that I would more appreciate help figuring out what the problem is. The most recent couple would be after driver verifier was enabled. I know I could simply turn off the verifier and run my computer as usual, but I thought this would help me fix the greater problem.

Read other answers
RELEVANCY SCORE 52.4

I have a relatively new computer that I've built and I've been getting BSOD's for a while.

At first I thought it was because the pagefile was disabled, but that was just why they weren't getting logged to MiniDump. Then I got it enabled again and now I'm getting a lot of BSODs. It's been 0x3b ntoskrnl exe lately, but when I enabled driver verifier I was getting a different BSOD on each boot.

One of them specifically mentioned a .sys that I can't exactly remember. it was XXhalp.sys or something, and when I Googled it - everyone was talking about deleting monitor profiles from the registry and that somehow old monitor profiles were causing the BSODs, so I donno about that.

I would appreciate any help you can offer. I'll be actively monitoring this (and I'm currently in safe mode with driver verifier still enabled). So just let me know what you need.

Thanks,

Pseudo

A:BSOD Fairly Often. Driver Verifier Enabled = BSOD on Boot Every Time

Is there anything I can do to get someone to take a look at this?

Read other 9 answers
RELEVANCY SCORE 52.4

Hello,
As the thread shows im having lots and lots of little(and big) crashes.

Im attaching the SF log and any help will be appreciated

Many thanks,
Dimitris

A:BSOD-PC Freezes randomly-Driver Verifier BSOD's at User Log-On

Added a zip file with three minidumps as i forgot that ive changed the default location of systemroot/minidump to a different disk as im not using virtual memory on os disk

Read other 7 answers
RELEVANCY SCORE 52.4

I get a BSOD only when gaming Heroes of Newerth which really only uses a small portion of my computers power, other games I have not noticed any issues (although I dont game other games much). Movies and general computering does not cause any BSOD.

I did a Driver Verifier BSOD came up hidclass.sys saved.. Arghh I had to do a system restore when I came back to windows and it deleted the mini dump! I've attached a old ones and will re-do driver verifier if requested.

I did a windows ram test and HDD test for C: and no issues noticed.

I'm new to this whole process but tried to figure it out on my own first any help is much appreciated!

Windows 7 - 64 bit, Windows was the original OS, Pre-Installed. System is 3 years old same as OS.


? CPU - AMD Phenom II X4 955 Black Edition Deneb 3.2GHz
? Video Card - XFX HD-487A-ZWFC Radeon HD 4870 1GB 256-bit GDDR5 PCI Express 2.0 x16
? MotherBoard - ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard
? Power Supply - brand & wattage - OSZ 700watt Model: OCZ700MXSP

? System Manufacturer - My self
? Exact model number (if laptop, check label on bottom)

A:BSOD while gaming - Driver Verifier makes BSOD hidclass.sys

I've tried to set up a Driver Verifier mini dump but when I activate it it makes a bluescreen when I come back. I follow the instructions to then go back to my system restore point but when I do it then removes the dump file. My assumption is that now I want for another natural BSOD and then upload that dump? Or should I redo the Driver Verifier and in safe mode upload the dump files?

Read other 2 answers
RELEVANCY SCORE 52

Hi All

Have been following a number of threads to identify my issue. I can only assume that a driver is at fault as when i run verifier i have to start in safe mode. Attached is my mini dump, can anyone help me identify where the issue is?

Thanks a lot

Lordmwa

EDIT - Added the full lot of info from the diagnostic tool

A:Random BSOD, ran driver verifier now got 0x000000c9 BSOD

Hi lordmwa.

It appears that you have driver verifier enabled. And the verifier detected the Logitech Camera driver, twice, in two crash dumps.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {6, 103, fffff98005bb4870, 0}

*** WARNING: Unable to verify timestamp for lv302a64.sys
*** ERROR: Module load completed but symbols could not be loaded for lv302a64.sys
Probably caused by : lv302a64.sys ( lv302a64+15e1 )

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`06b6c000 fffff880`06b6e400 lv302a64 T (no symbols)
Loaded symbol image file: lv302a64.sys
Image path: \SystemRoot\system32\DRIVERS\lv302a64.sys
Image name: lv302a64.sys
Timestamp: Fri May 01 04:11:07 2009 (49FA2903)
CheckSum: 0000515F
ImageSize: 00002400
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
First, disable Driver Verifier. Then update the logitech drivers from Logitech Support - Downloads, Manuals, FAQs & More.

It is a Desktop PC, and magicISO is not a must for it. I w... Read more

Read other 4 answers
RELEVANCY SCORE 52

Recently my computer has started seriously acting up by first disabling all directx and d3d functionality it took a full driver uninstall and reinstall to make that functional again but my computer is still having bsod issue's I don't understand where this came from it happened out of nowhere my 6950 is also overheating for some reason also out of the blue its pushing 103-105C in directx11 games which it usually never hit over 60-70C in on ultra settings which is the new temp the card idles at with the case open and fans pointed at it. I am now moving from a software issue to assuming hardware failure. I need second opinions here please help me.

A:BSOD's in driver verifier, BSOD's on C:/ disk check (os hdd) & more.

Security App

Crashes indicate Symantec being a possible cause. Remove Symantec and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials and Malwarebytes, both recommended from a strict BSOD perspective.

Microsoft Security Essentials, Free antivirus for windows

Malwarebytes Anti-Malware Free



   Information
DO NOT start the free trial of MalwareBytes. Deselect the option when prompted.
Hard Drive/Storage

Post a screen shot using Crystal Disk Info: CrystalDiskInfo Standard Edition

How to Upload and Post a Screenshot and File in Seven Forums
Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - Disk Check
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Heat:
-Only use the laptop on a hard surface with nothing blocking any of the vents.
-Use a laptop cooling pad if possible
-Blow out all vents with canned air (DO NOT use a vacuum cleaner or an air compressor, they can damage the components).
-Ensure that the fan comes on and is blowing air out of the vent (may not h... Read more

Read other 1 answers
RELEVANCY SCORE 51.2

When I turned my computer on, My computer started acting up and my taskbar became disabled, obviously from a virus, but this is not what I wanna talk about. It's that when I restarted my computer, it loaded at the desktop but wouldn't show anything like icons or start menu. Because my taskbar was disabled, I wasn't able to press "CTRL" "ALT" and "DEL" to type in explorer to bring it back.

So I decided to restart my computer again, but this time when windows xp said it was loading it then gives me a blue screen of a bunch of "x000000000" of sorts.

So I try a couple of restarts including last good configure or something and it gives me the same thing.

THIS IS WHERE IT GETS TERRIFYING!!!

I press F10 to go to the "Boot" menu to make sure nothing was changed and it had the exit and all sorts of options.

But when I restarted my computer, I went back into the "BOOT" menu and this time... MOST OPTION ARE GONE!!!

These are the only existing selections.
"BOOT"

Boot Option Menu

TSSTcorpCD/DVD TS-H552D
IBA FE Slot 0540 v4117
WDC WD2500JS-22NCB1

and

"Select Item, Enter Select SubMenu, Esc Exit"

THIS IS STRANGE!

I hope this can be fixed!

I had problem previously with windows on this website when someone named AustrAlien help me fix it. I hope someone can help me get in touch with him again.

I have a bunch of CDs such a... Read more

A:I get BSOD when computer restarts

OK, a little bit of correction, I got paranoid with my computer and pushed F10 to bring up the "BOOT" menu thinking it was the former "BIOS" menu making me think everything dissappeared in the "BIOS" menu.

But still, any way to fix the BSOD?

THANKS!!!

Read other 6 answers
RELEVANCY SCORE 51.2

I just purchased a new Dell computer last week and have slowly been migrating information from my old computer to this one.
Out of nowhere, this morning my computer restarted with no warning. I had Outlook, Word and Mozilla open and it just made a buzzing noise and restarted. It happened twice within 15 minutes and hasn't done it since.

This is the Problem Signature. I downloaded the suggested Windows 7 BSOD "fixer" that I found on another thread. I've attached the .zip and .exe file with the information.
Please advise.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 00000004
BCP2: 00000002
BCP3: 00000000
BCP4: 909073D2
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\013111-18158-01.dmp
C:\Users\Office Manager\AppData\Local\Temp\WER-47003-0.sysdata.xml
file:///C:/Users/Office%20Manager/Downloads/Windows_NT6_BSOD_v3.03_jcgriff2_.zip

A:BSOD-Restarts my computer

Hi joykeen and welcome to the forum. Unfortunately, you uploaded the JC Griff tool, not the files it produces. Please read this thread, follow the instructions and try again. We will be glad to help you: http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

Read other 3 answers
RELEVANCY SCORE 51.2

Every time i turn on my computer within 10 seconds it restarts and repeats the process. A box prompts up with an error report saying:

System has recovered from a serious error. I view the technical information it says:

C:\DOCUME~1\Owner\LOCALS~1\Temp\WERf7f2.dir00\Mini082010-01.dmp
C:\DOCUME~1\Owner\LOCALS~1\Temp\WERf7f2.dir00\systdata.xml

I click do not send two boxes have popped up indicating a problem they are:

The procedure entry point JS_IsDebuggerFrame could not be located in the dynamic link library Js3250.dlll
and
The instruction at 0x7c80c621 referenced memory at 0x00df0009. The memory could not be read.

Can some one please help me out here, much thanks; i am running windows xp

A:Computer starts up then restarts (Safe mode freezes)Every time i turn on my computer within 10 seconds it restarts and repeats...

Have you tried the Lask Known Good Configuration option?

I think it might be a Mozillla issue (damaged), calling for the uninstall/reinstall routine.

Louis

Read other 1 answers
RELEVANCY SCORE 51.2

Hello all,

Okay, so I have been getting a lot of BSOD. I tried to do the verifier trick and got a BSOD quickly. When you get a moment, can you please review and let me know if you can isolate the problem? Thanks.

P.S. - Sorry for the bump.

A:BSOD after verifier

Please turn off Driver Verifier and let the system BSOD on it's own.
Then upload those minidumps.

Read other 3 answers
RELEVANCY SCORE 51.2

Attempted to track down a suspected faulty driver using verifier.exe resulted in multiple BSOD, although only one mini-dump file was successfully written, of the Nvidia system driver nvlddmkm.sys. However, repeated use of verifier.exe isolating this driver did not result in additional BSOD's which I found was odd. Attached is the mini-dump file of this event; any comments or suggestions would be helpful.

Background information:
Computer background info:
-OS: Windows 7 Home Premium 64 bit, OEM version, purchased from Fry's Electronics.
-Motherboard: Gigabyte P55A-UD3
-Chipset: Intel i5-760
-RAM: 8gig Corsair XMS3 1600, matched latency
-HD: Seagate Barracuda 1 Tb 7200 rpm 32 Mb cache
-Video Card: NVidia GTX 460 768 MB

Have also run Memtest for 7 days trying different combination of RAM in different slots, omitting RAM, and using new RAM. There is no anti-virus loaded on this machine at this time to eliminate its possibility of causing errors as well.

Thank you in advance
Joe

A:BSOD using Verifier.exe...

Hi CycloneJoe67 and Welcome.

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility.

Your latest dump file blames Pool_corruption which usually indicates bad drivers. Although your drivers look good.

You could update your graphics driver to the latest version. nVidia Graphics Driver.
Download and install Driver Sweeper.
Boot to Safe Mode
Uninstall current Graphics Drivers set up.
Run Driver Sweeper to clean up any left overs.
Reboot to Normal Mode.
Install your new Graphics Drivers.
Set Driver Verifier to check all drivers except system drivers.

GoTo Start and in the Search or Run... Window type verifier.exe and press Enter
Select Create custom settings (for code developers) and click "Next"
Select Select individual settings from a full list and click "Next"
Select every option EXCEPT for Low Resource Simulation and click "Next"
Select Select driver names from a list and click "Next"
Select all drivers listed that are NOT provided by Microsoft and click "Next"
Select "Finish" on the next page.

As a Priority:

Run an up to date scan with Malwarebytes' Free.

Download and install BSOD friendly Microsoft Security Essentials.
Bugcheck Analysis
Code:
Loading Dump File [D:\ DOWNLOADS\ DUMPS\CycloneJoe67\020511-16239-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*... Read more

Read other 1 answers
RELEVANCY SCORE 51.2

Hi,

Recently my PC has had troubles trying to boot up. Usually during the Windows loading screen or when I enter my desktop my PC would freeze.

It does occasionally boot up correctly .

I've ran virus and malware scan with no malicious items detected.
I've used the system file checker, it detected nothing.
I've also system restored my PC to the further point possible but that didn't help neither.

I then used the verifier, which did cause a BSOD. So I think perhaps those two things are related?? OS - Vista
? x86 (32-bit)
? What was original installed OS on system? Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) Approximately four years
? Age of OS installation - have you re-installed the OS? No

? CPU - Intel(R) Core(TM)2 Quad CPU Q6600 @2.40GHz (4CPUs), ~2.4GHz
? Video Card - NVIDIA GeForce 9600 GT
? MotherBoard - ECS MCP73VT-PM Mainboard
? Power Supply - brand & wattage - Hi-Power Black 800W 14cm Blue LED Fan PSU - 20+4pin 4x SATA 4x PCI-E

? System Manufacturer - Packard Bell
? Exact model number (if laptop, check label on bottom) - MCP73VT-PM

A:BSOD verifier

Bump.

Read other 18 answers
RELEVANCY SCORE 50.8

Hi all,
Over the past months I have encountered a BSOD roughly every month and I want to get rid of it. The BSOD happens at random (at least as far as I know), not with specific tasks.

This morning I started looking for the error and found that turning verifier ON might help in identification. I did this and rebooted a couple of times, every time with the same BSOD occuring during the boot stating something about dne64x.sys

I've turned verifier OFF again (otherwise I wouldn't be typing this).

I have attached all the data to my post. Could someone have a look and, hopefully, tell me what is wrong and how to fix it?!

Thanks!

Michiel
System specs:
--
Windows 7 Professional x64 full retail version
+/- 8 months old system, OS age is the same

A:+/- monthly BSOD & boottime BSOD with verifier on

The purpose of Driver Verifier is to generate BSOD's - but it's only useful as a troubleshooting tool when looking for solutions to specific issues (issues that the tool checks for). Please leave it off unless we suggest that you run it in a specific way.

perfmon /report shows your Cisco VPN adapter as being disabled. Please reenable it and uninstall it. Should you want to keep this device, feel free to reinstall it after the system is made stable again. Additionally, since Driver Verifier blames it (the dne64x.sys driver) - and it dates from 2008, it's most likely the cause of your problems.

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





Quote:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World... Read more

Read other 4 answers
RELEVANCY SCORE 50.8

Yesterday i popped in my motherboard cd and installed asus suite II and reinstalled the Renesas usb 3.0 drivers, Updated my BIOS to a more recent version and raised my ram speed from 1333 to 1866mhz. A short while after this my computer BSOD and it said PFN_LIST_CORRUPT. I used seagate tools to check my hard drive for problems, it came back clear. Chkdsk didnt fix anything. Right now im making a IMAGE of my hard drive and are going to use seagate tools to fix any corrupted sectors. after this PFN_LIST_CORRPUT bsod a few hours later another bsod came on saying "A driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced with a working version." This second BSOD was caused by the driver verifier i activated, so i shut off driver verifier to prevent it from making any future BSODS. Dump File PFN_LIST_CORRUPT: (https://app.box.com/s/pqnice03kzf2m6pxgb87)

If you want the dump file for the driver verifier BSOD feel free to ask, thank you!

A:PFN_LIST_CORRUPT BSOD, Driver Verifier BSOD

Heres the DM log i just made, Its for 3 BSODS.

Read other 9 answers
RELEVANCY SCORE 50.8

Ok, so i will try my best to provide everyone with the most detail I can so my problems can be properly assessed. So I am getting BSOD crash/restarts when I surf the web and when I game (mostly SC II) I keep getting a crash (but not BSOD) and it tells me that there is an ACCESS_VIOLATION (0xC0000005) and says that my memory can not be read at a certain sector. The crashes are happening very frequently and it is very annoying.


Here are the things I have done sop far...

-Ran memtest86 for 4 complete passes and have not received any errors

-Ran Ccleaner and the driver sweeper as well as the Registry cleaner

-Ran system tune-up utilities 2012

-Disk cleanup/defragment

-Ran prime95 and ran each cpu test overnight with no errors/crashes

Here are my system specs... (keep in mind this computer is brand new and not even 2 weeks old)

- i5 2550k processor with CM Hyper 212 EVO

- Asus Edition HD 6950 2gb gpu

-Corsair TX 750w psu

-8gb Kingston Hyper X ram

-Asus P8Z68-V LX Motherboard

-OCZ Vertex 3 120GB SSD with OS and 1tb Seagate Barracuda Storage Drive

-Antec 1100 Case with added CM front fans


Please let me know if i can provide more info to further help with the diagnosis as i am very eager to assist and get this pc fixed and back to gaming!

A:New Computer getting BSOD restarts very frequently

Have you run all these reg cleaners from the very beginning? If you have they have created worse problems.
Memtest needs to be run first for all memory and at least 2 full tests where each test has 8 passes. Then run the sticks individually each for at least 2 complete tests.

Read other 3 answers
RELEVANCY SCORE 50.8

I've had this computer for almost a year and had been working fine. All of a sudden it started restarting on its own. The first few times I thought I had pulled the power cable, or touched some button. I formatted the hard drive and made a clean install, but the crashes continue. They come randomly, and since my clean install the crashes have occurred on: Sept 11(3 times), Sept 17(once), Sept 21(twice), Sept 24(once), Sept 27(once), Sept 28(once).

The CPU temperature at the crash is always around 60 degrees, the GPU temp at the crash has been between 40 degrees and 80 degrees(it crashed while gaming). I have run memtest86 for a few hours with all the sticks, and then alternating sticks, and then alternating slots. No error has occurred. My GPU has worked fine with another system.

Tried to make the computer post a BSOD on crash, but it just restarts, as if someone had unplugged it, and plugged it back again. There is also no dump file created. I have only the keyboard, and mouse connected to usb ports. I think this may be a MOBO or PSU problem but am not really sure. If anyone has any help they can give it would be greatly appreciated.

My specs are:
MOBO: ASUS P6x58d-e
GPU: Nvidia GTX 470
CPU: Core i7 950
Hard drive: WD Caviar Black 1TB
RAM: GSkill F3-12800CL9-6GBNQ
PSU: Corsair TX750

A:Random computer restarts with no BSOD

Im attaching the files of perfomn and the NT6_BSOD. Yesterday I had a BSOD but it was caused by a failed sleep, and as far as I know the two crashes are unrelated.

Read other 1 answers
RELEVANCY SCORE 50.8

Hi and thanks for reading as your time is appreciated

I have recently just bought a new system in which I have built myself(Not the first either and but this problem is my first) and is barely 4 days old. My computer has been randomly restarting itself without a blue screen and this started happening when I installed and played Bad company 2 within the first 10 minutes of the game. At first I thought it was the game so I tried GTA4 and the same happend. I then tried counter strike source and the same thing happend.

I thought this was my new gfx card that I have just installed but then my computer started restarting when installing games, looking on youtube, general browsing/viewing movies/ and it happens at random and different times. My gfx driver is 196.21 because the latest driver has faults.

My pc has good air flow with idle temps reaching below 29 degrees. At load cpu reaches 35-40 and the gfx card reaches 60 at max. I have no faulty fans, no errors based on that. The memory is compatible with the board and cpu. I have just installed windows 7 so its fresh and has no bad areas. I have even turned of the "automatic restart" in the system failure options but still get the same result. I have updated the bios to the latest version

My FULL specs are

AMD phenom 2 3.2 quad black edition with stock cooler
ASUS EVO board socket AM3
4GB DDR3 1066 (2 sticks)
2 Harddrives
coolermaster 520 Watt psu
coolermaster case which allows up to 9 addit... Read more

A:Computer restarts without warning, NO BSOD

The STOP 0x124 error is an error that your CPU reports to Windows. It's usually either a hardware problem (something's broken) or a compatibility issue.

I'd suggest following the steps in this post: http://www.sevenforums.com/crash-loc...-what-try.html

Read other 1 answers
RELEVANCY SCORE 50.8

What Do You need from me to solve this issue?

A:No BSOD But Computer Randomly Restarts

Depends on what the problem is.
 
Start with these reports: 
1)  Please provide this information (even though you're not seeing BSOD's) so we can provide a complete analysis (from the Pinned Topic at the top of the forum):  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
2)  Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog)
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).
FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here:  http://support.microsoft.com/kb/2028504
While waiting for a reply, please monitor your temps with this free utility:  http://www.cpuid.com/softwares/hwmonitor.html
 

Read other 18 answers
RELEVANCY SCORE 50.8

My Compaq Presario GQ60 started BSODing out of nowhere on the 22 Ive tried just about everything

A:BSOD randomly computer restarts

Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\dmoney9008\Minidump\032312-36441-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) UP Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02c0f000 PsLoadedModuleList = 0xfffff800`02e53650
Debug session time: Thu Mar 22 23:24:46.138 2012 (UTC - 6:00)
System Uptime: 0 days 0:36:33.792
Loading Kernel Symbols
...............................................................
................................................................
..............................................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fc4000af38, ffffffffc0000185, 3354e860, fffff880015e7cd0}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ... Read more

Read other 4 answers
RELEVANCY SCORE 50.8

Hello People,

Well basicly i received a BSOD with the Stop Error 0x0000007F(0x0000008,0xBAB38D70, 0x000000, 0x000000) And ive done hardware tests on everything Memtests(Windows,Others), EVEREST Ultimate, SeaTools, Loads of other tools and they all found nothing hardware related problem but i dont understand why its happening ive formatted and all that milarky.

Ive attached a dump file so if anyone can find the problem i will be very happy
 

A:BSOD and then Computer Restarts! Urgent

BugCheck 1000007F, {8, bab38d70, 0, 0}
Probably caused by : BT4501G.sysClick to expand...

BT4501G.sys: USB Wireless Adaptor

Use ethernet cable instead, and remove the USB drivers
 

Read other 3 answers
RELEVANCY SCORE 50.8

Hello
I have had a terribly annoying problem affecting my computer
for the past 5 months.

This problem causes the computer to randomly restart at any random time.
This has become very frustrating throughout the past 5 months as once the computer restarted when I was almost finished with my GCSE History coursework.

A Blue Screen of Death appears each time the computer restarts.
I have also written this down as it may help fix this problem I am having.

I will post it in the next post

A:Computer Randomly Restarts. BSoD!

BSOD Report

A problem has been detected and windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software.
Disable BIOS memory options such as cashing or shadowing.
If you need to use safe mode to remove or disable components,
restart your computer,
Press F8 to select advanced startup options, and then select safe mode.

TECHNICAL INFORMATION:

*** Stop: 0x000000D1 (0xF8098328, 0x00000002, 0x00000000, 0xF8098328)

*** USBPORT.sys - Address F8098328 base at F807A000, Datestamp 41107d62
*** USBPORT.sys - Address F8098328 base at F807A000, Datestamp 41107d62

Beginning dump of Physical memory
Physical memory dump complete.

Contact your system administrator or technical support group for further assistance

Read other 6 answers
RELEVANCY SCORE 50.8

Computer Freezes, Restarts, BSOD
Computer Specs
-Acer Predator G3600
-Windows 7 Home Premium
-x64
-Original OS: Windows 7 Home Premium
-OEM version

-Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz 3.30GHz
-NVIDIA GeForce GT 440
-Processor: 2.1 GHz Intel Core i5
-RAM: 8 GB
-RAM Type: SDRAM
-Reformatted computer 2 or 3 times in the past month

For some reason, my computer started freezing and restarting on it own at random. BSOD also occurred a couple of times. A virus once attacked my computer before and I'm afraid that my hardware has been corrupted or something as my computer freezes up to 5 times in a day and it is very irritating. (the virus has already been removed by reformatting my computer a couple of times but the problem persists)

I tried to use virus scans to check if it was the fault of a virus but to no avail. Most of the time it will just switch off and then restarts by itself and sometimes it hangs and I have to manually off the computer by holding onto the power button. The event viewer has a couple of critical, error and warnings which i will be posting below.

Critical
-Event 41, Kernel-Power
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Error
-Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff800033ad5ec, 0xfffff880033a8948, 0xfffff880033a81b0). A dump was ... Read more

Read other answers
RELEVANCY SCORE 50.8

Hi,

For the past few weeks my computer has started to restart randomly every so often.

If i am on it all day it can happen 2-3 times with 5-6 hour intervals.

I would generally be gaming when it happens.

I will attach a a picture of OCCT after almost 30 mins. The results, according to my research are unsettling.




I was running a world of warcraft instance at the time. Would this effect the outcome?

A:Computer restarts randomly no bsod

So here are a the collections that have been asked for.

and a link to my old thread with basic info and an OCCT screenshot after 30 mins

http://www.techsupportforum.com/foru...ly-682088.html

Read other 8 answers
RELEVANCY SCORE 50.8

I'm having the wonderful BSOD problem. Computer was up and running fine for about 6months now - And randomly, just yesterday - had a BSOD. The error blinked for about one second and disappeared. I don't have my computer to automatically reset on errrors, but I can never seem to catch it before it disappears and restarts.

Anyhow. In the event viewer - The error reads.

Error code 0000009c, parameter1 00000000, parameter2 b8344050, parameter3 b2000000, parameter4 1040080f.

--

I can't seem to find much on it. Up to this point, I've updated my Video Card drivers, Taken my sound card out, Swapped Ram (removed 1 stick, then the next) .. I keep getting the error. Computer runs 100% fine in Safe Mode, though .. Can it be a hardware problem? Software? Drivers? Why would these errors start after so long. Nothing on the computer changed.
 

A:BSOD: Computer immediately restarts.

Read other 16 answers