Over 1 million tech questions and answers.

seagate drive

Q: seagate drive

i already tried connecting usb port nothing

Read other answers
RELEVANCY SCORE 200
Preferred Solution: seagate drive

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 47.6

It is on a computer running XP SP3. Now, it shows up in ?My Computer? but with no statistics and I cannot open it. The drive does not show up in Windows Disk Management. I have gone thru the Seagate website's ?External Drive Trouble Shooter for WinDOWS xp/2000? as well as contacting Seagate Support with no success. I have tried Windows Format, DOS Format, Seatools for Windows, HD LFF Low Level Format, testdisk_win, and Disk Wizard with no success. The drive showed up but they all reported failure in testing and/or accessing the disk. Seatools for DOS sounds like it would do the trick but it didnotrecognizeeitherofmyexternaldrives, theotheroneofwhichisworking.Can anyone recommend a fix? Seems to me that it is a software problem, not a hardware problem, so there should be a software solution. I have very limited funds and can't afford to replace the drive right now. It is used as a backup drive so loss of the data on the drive is not an issue. I'll just run another backup when the drive is restored to health. My boot drive is not backed up on this drive, so that is not a problem.
 

A:Seagate expansion hard drive worked fine until I aborted a conversion to a compressed drive

Have you tried reinitializing the drive?
 

Read other 2 answers
RELEVANCY SCORE 47.6

Hi,

When I switched my Laptop on yesterday the nice Seagate Icon for my external backup hard drive had vanished but has been replaced by a dull looking generic Windows page icon ? This external backup drive is the K:\ drive on my system.

I surfed google yesterday trying to find some advice on how to restore what was a very attractive Icon ? . . but have been struggling to find any advice I could understand or thought I'd be able to follow ?

On a positive note, I have located the exact file for the disappeared icon on my laptop (its called SeagatePortable.ico) and I have copied it to my desktop temporarily, but, I have no idea how to re-apply this icon to my K:\ drive ?

Whilst surfing, I discovered a simple freeware program called "Drive Icon Changer" so I downloaded this program and tried to use it. It is very easy to use, but, try as I might, I cannot get this programme to interact with my K;\ drive ? . . so I've given up and uninstalled that programme, as, in this instance at least, it clearly does not do what it is supposed to be able to do.

I also saw some advice about going to a DOS prompt (I do not understand what this means or how to do it?) and deleting or editing something called the autorun.inf file - I suspect this type of action would be well beyond my understanding and I'd probably do more harm than good if I attempted to edit this sort of system file and got it wrong !

I've also done a system restore - to a back up point of a couple of days ... Read more

A:How do I restore the Seagate Drive Icon for my External Backup Drive?

Also just spotted an obsolete thread on this site where someone suggested:-

"Un-install the driver while the external drive is connected and then rebooted and let windows reinstall - everything should go back to normal when Windows re-discovered the drive".

I don't know if this might cure my problem ? . . but unfortunately I do not know how to uninstall a driver ?

Read other 3 answers
RELEVANCY SCORE 47.6

After Transferring file from Seagate External drive to flash drive 16G. (Verbatim)

I can't remove hardware device on Verbatim Flash drive to remove it.

Even after I close all the files, folders and programs in my computer.
It won't say "safe to remove device".

I have to switch off the computer to remove the flash drive.

Is this normal or what ?

If not what can be the problem ? I can fix ?

Is it safe to remove device even if I can't disable the usb flash drive ?
I closed all the files, fodlers and programs before I remove.

Thanks.

A:Transferring file from Seagate External drive to flash drive

The computer may still be saving data to the Flash. Or it is caught in ROM. If your certain the transfer is complete, you can pull the drive. You may want to do a Check Disk on the Flash Drive to make sure it is in good order.

Read other 1 answers
RELEVANCY SCORE 47.2

I'm having trouble getting Windows 7 x86 RC Build 7100 to recognize my Seagate 3.5" External Hard Drive 500GB (Model ST305004EXA101-RK). It is connected through a USB 2.0 port on my Asus K8V SE Motherboard - running an AMD Athlon 64 3000+ (2.0 GHz) and 1 GB of RAM.

Currently, this hard drive when connected appears in Device and Printers as as "Device" named Desktop. Right Click -> Properties shows that it is a storage device.

Device Manager recognizes it as a Disk Drive and calls it a Seagate Desktop USB Device - no conflicts.

Under Computer Management -> Storage -> Disk Management the drive appears as Disk 1 - Basic and Online statuses. If I try and assign it a drive letter, I get the following "The operation failed to complete becasue the Disk Managment Console view is out of date. Please refresh the console view..."

Only one conflict exists in Device Manager - I have one Unknown Device under USB Controllers. When viewing that device, it gives me a Code 43 error.

Thoughts? Thanks in advance.

Ollie

A:Seagate external hard drive not accessible as a drive

Has it been initalized & formated?

Read other 9 answers
RELEVANCY SCORE 47.2

I recently purchased a Seagate IDE Tape Drive, STT20000. I only have 4 IDE slots, and they are all taken, plus I don't have any room for an IDE controller card, so I bought a IDE to USB external case that turns any IDE device to a USB external device. I installed the tape drive, Windows XP recognizes the new device, attepts to install drivers, but cannot find any. I tried to search the Internet for any correct drivers and could not find any. Other devices work via USB that are attached to the same USB hub, and I can put a tape in the unit and it rewinds it. No drive letter is assigned at all.

Any help is appreciated.

Todd
 

A:Problems with a Seagate IDE Tape Drive converted to a USB drive.

I suspect the tape drive will have problems being interfaced through the USB. I suggest you move one of the disks into the USB case and put the tape on the IDE controller in the machine.
 

Read other 2 answers
RELEVANCY SCORE 46.4

Seagate's website / the manual say the (this one: Desktop-Festplatte Expansion| Seagate) 5TB Expansion Drive is initialized in GPT (Expansion drives switching to GPT) but Windows 7 and dispart (http://i.imgur.com/1JxRAja.png) show it is initialized in MBR / not in GPT (the column under GPT is empty). The item to initialize in / convert to GPT is grayed out (I assume one have to remove the partition first to access that option): http://i.imgur.com/xeqkQmJ.png. And it looks like as if MiniToolPartizionWizard shows it was GPT as well: http://i.imgur.com/PsQfLY8.png

What could that mean? Is the display of Win / diskpart correct?

Is this message correct? DriveInfo shows: S.M.A.R.T. Drive Status: Drive is not OK! The device has detected a threshold exceeded condition! (http://i.imgur.com/5xfPSq9.png). What does that mean? A defect, a problem?
The entire report:
http://i.imgur.com/rySWvIt.png
http://i.imgur.com/qyquxVB.png
http://i.imgur.com/R5bx0s2.png

ChystalDisk shows this, does not appear to look that bad:
http://i.imgur.com/v7TYPhZ.png
and
http://i.imgur.com/z1exc22.png

SeaTools shows this:
http://i.imgur.com/0ulGbCQ.png

HDDscan shows:
http://i.imgur.com/8hlD3pN.png
and
http://i.imgur.com/UMRP2GM.png

What do those items marked with that yellow sign mean:

"Airflow temperature"
and
"HDA Temperatur"
A problem?

What does the display about "Health" mean, 90 %, 92 % (instead of 100 %) appear to mean the state of the drive is not the best (any... Read more

A:Seagate 5TB Expansion Drive not initialized in MBR or GPT? Drive OK?

everything is okay. delete the partition, initialize GPT. gute nacht.

Read other 9 answers
RELEVANCY SCORE 45.6

Ok so recently have upgraded to Windows & Ultimate on a Samsung HDD, and copied ALL necessary information that i needed to a Seagate HDD before the format. The Seagate was formatted on the XP install with NTFS, and data copied to it. Now after the install the primary(Samsung works fine), but the Seagate where all my information is does not come up in my computer. At start up, it does pick up both drives, and in Device manager it says( ST9120822AS SCSI Disk), and in Disk Manager, it does show, and is healthy and says something like backup partion/recovery partition or something to that effect, but there is no drive letter. When I right click on the drive the only thing that comes up is Help, no option to assign a drive letter. The Seagate drive capacity shows 111,9/120 Gigs, which means there is data there.

Now I did have the motherboard drivers but those didn't have anything for windows 7, as it came out later, and i did install them. I have recently downloaded the drivers and will install them when I get home. If the drivers aren't an issue what could it be?

A:Seagate Drive Not Available

Hello Vengeful and welcome to the Forum. You might see if this will work:Plug in the external hard drive
Open Device Manager
Expand the USB list
Find the USB device for your USB Hard Drive (in my case it was the one that had no description)
Right mouse click > Uninstall
Unplug external hard drive and restart computer
Plug external hard drive back in and let Windows 7 find/install the driver
See if external hard drive is recognized/works.
Another possibility:

1. Plug in the external USB hard drive
2. Right mouse click on Computer
3.Left click on Manage
4.Double click on Storage
5.Double click on Dick Management
6.Disk 0 is Hard Drive Partitions
Disk 1 will display the SIZE of the external device with no name
7. Right mouse click the BLUE BAR on Disk 1
8.Left click on Mark Partition as Active
9.Left click on Change Drive Letter and Paths
10.Right click the “Add” button - Right click OK
11. The external USB device should now have a drive letter

Read other 5 answers
RELEVANCY SCORE 45.6

I bought a 1 TB barracuda seagate drive about 4-5 months ago. My wife recently alerted me to a warning windows 7 popped up saying that the drive was failing and I should back everything up on the drive (I haven't been home much lately, been sequestered away studying).

I use the drive for media (movies, pictures, music, etc) and have 3 other HD's on the computer (all maxtors). 1 running the OS, 1 I run games from and 1 that back up images and files too.

I ran a scan on the drive with windows (strangely seatools isn't detecting any of my maxtor drives or the seagate ones ) and it did not note anything wrong with it. So I downloaded HD tune pro (the trial) and took a look at the drive. Under Reallocated sector count it shows 30 bad, 30 as the minimum (before it sets of the alarm? I am not sure minimum what), and 36 as threshold (again not sure what threshold is for). The status is listed as 'failed' and it says 2882 damaged sectors that have been replaced. HD tune pro's advice is the drive is imminently going to fail.

I've had the displeasure of losing hard drives before. This drive isn't acting anything like a drive with hardware errors. It isn't sluggish. Files on it weren't corrupted. It wasn't making funny noises, etc So was thinking this might be some kind of logical error and not an actual hardware fault?

So I zerofilled the drive last night and ran a chkdsk /r on it today. The chkdsk shows 0 bad sectors. Howeve... Read more

A:Bad seagate drive? Need some help

Read other 6 answers
RELEVANCY SCORE 44.8

Quote:
Seagate has confirmed plans to release a 3TB hard disk drive later this year. However, the 3TB drive will only be recognized by 64-bit operating systems, such as Windows 7, Vista and Linux.
"Not only that, but you may not even be able to see 2.1TB of a 3TB drive when using Windows XP," wrote Thinq's Ben Hardwidge


Read More: Seagate says 3TB drive requires 64-bit OS | TG Daily

A:Seagate says 3TB drive requires 64-bit OS

darn that is crazy...although would it work if the drive were partitioned into mutable logical drives?

Read other 9 answers
RELEVANCY SCORE 44.8

I have this Seagte 200 gig ext hard drive . So the trouble I am having is this....it doesnt seem to werk anymore. The drive apparently needs to be formated...and well I have all my music n movies n well other stuff backed up in there. My question is.. is there any way to salvage all the info that is in my hard drive without formatting it? Or is there no way around it...do i have to come to the utter conclusion that all my werk is lost? please someone let me know A.S.A.P
thank you.
 

A:Seagate ext. drive troubles

Read other 7 answers
RELEVANCY SCORE 44.8

Hi,

I'm trying to access my 2t seagate hard drive on my lenovo ideapad windows 10, but it just comes up as an expansion desk in control panel. help!!
 

A:seagate hard drive

That does look strange. I assume that it's a used disk you've added since there's already a 270GB partition on it? HOWEVER, It doesn't have a drive letter assigned to it.

What exactly is it you want to do? Delete everything on it and create a single 2TB partition or what? Assign a drive letter to the existing partition so you can see what's on there?

There's a free partition tool you can use to do all kinds of partition work that Windows Disk Management can't do. You can find it HERE.

If all you want to do is to expand the existing partition, via WIndows DIsk Management, to use the available space on the disk? Then there's a guide on that HERE.

Just remember that if you delete the existing partition ALL data on it will be lost.
 

Read other 1 answers
RELEVANCY SCORE 44.8

I have a sea gate ext drive that is not recognised this happens every 3/4 weeks regular as clockwork
i have to uninstall and reinstall then all is good for another month any ideas why would be appreciated. This drive has been installed for 18 mths. Just started dipoing this 3 mtago

A:seagate ext drive that is not recognised

Have you tried anything else with that USB port? - or the USB plug itself? try cleaning both and getting a fresh driver.

Read other 2 answers
RELEVANCY SCORE 44.8

Ok i have a seagate harddrive its 80gb, the model: ST380012A. And heres my problem, the hard drive spins up and everything i go into the bios and its detected well at least it displays the model in bios. Now if i go to say a windows xp install disk it doesnt see the hard drive all together, if i boot up to win xp it will freeze up while loading xp. Any ideas
 

A:Seagate Hard Drive

Read other 14 answers
RELEVANCY SCORE 44.8

I have a 3g usb seagate expansion drive that is about 3 mths old. It has frequently disappeared from my computer. I would have to reboot and disconnect the power from the drive to get it to come back.

Is this a sign of a bad drive or just a glitch that some kind of a driver update will solve.

In the same system I have a 6g WD drive that works flawless.

A:seagate expansion drive

Hello again, Datman I have onlya few suggestions.
1. download and install the latest chipset drivers from your motherboards/manufacturers web site
2. Run Seagate's diagnostic tool, SeaTools.
3. See if tis tutorial will help. USB Driver - General Fix for Problems

Read other 1 answers
RELEVANCY SCORE 44.8

I've got Win XP, and bought an additional internal 350GB hd from Seagate. I've had absolutely no problems with it so far.

I woke up this morning, and my computer was acting uncharacteristically slow, so I rebooted. It took several times to reboot in order to get to the password screen, it would just take exceptionally long to go through the waiting screen, on safe mode, regular mode, etc.

I finally was able to get on, and I opened a folder which is a shortcut to my Seagate for music, but I got a pop up from Windows claiming "The drive or network connection that the shortcut 'Music.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network resource is available, and then try again'

I've tried going into My Computer, the drive isn't there, nor does it appear when I right click, under manage...

There's been no physical trauma, movement, or anything to my tower. Could it possibly be a virus? I've used uTorrent for a while, but never had any issues with corrupt files (that I know of), and a full scan with AVG hasn't turned anything up.

Any thing I can do to get back my hard drive? I appreciate it :)

A:Seagate hard drive gone...

The slow boot times and the fact that the drive is no longer found by Windows, would seem to indicate the HDD has failed. If you disconnect the HDD, your boot times will return to normal. If it's still under warranty, you can have it replaced.

Read other 3 answers
RELEVANCY SCORE 44.8

I have been looking at getting a 1TB hard drive, the setup and reason on my computer I won't explain. However the brand I like the look of is Seagate. WD choose to go green, which is about the only feature they like to brag about. Nothing seems any better than Seagate with Hitachi.

So far I understand they have two models, which is why I looked up "ST31000340NS vs ST31000340AS" in google. The actual difference is small, being the NS having more restistance to shock because they might be used in trays of hard drives. Can you imagine getting read errors all because four of the other HDD's are creating problems to one other on the same tray? Oh and the amount of hours it is expected to have in it's life. I suppose I don't mind which model I choose out of the two as long as it is available, and is the cheaper one.

The main question I have to ask is why (from what I have noticed in NZ), is there usually a 1 year RTB warranty on this drive, when Seagate offer 5 years warranty which is a lot compared to other HDD companies? I can understand if they reduce 1 year on the drive, but I am missing a pretty big 4 years warranty. If I can't get that warrenty, how can I get that somewhere else?
 

A:Seagate 1TB drive warranty

Bump....
 

Read other 3 answers
RELEVANCY SCORE 44.8

I have a Seagate 320gb SATA Perpendicular Recording drive, and I'm fairly certain that it must be failing, the signs are as follows: Data Corruptions in certain files (not consistent areas), disk defrag will get to 96% and NEVER finish, when I bought the drive in november, it did a lot of clicking for a new drive.

Given these things, could the drive have faulty sectors, or be failing?

Thanks a lot!

-Andrew
 

A:Seagate Drive Failing?

seagate carries a 5 yr warranty.
 

Read other 3 answers
RELEVANCY SCORE 44.8

I purchased 2 Seagate ST32000641AS drives. These are 2TB drives giving 4TB all up.

They are S.M.A.R.T enabled drives and as such I installed monitoring software to check up on them from time to time . I am concerned that both of these drives are showing indication of failure already. Normally I just use 1 program to check but I have tried with 3 different ones and they all show the health of both drives, one at 40% and the other at 32%.

One drive is showing Surface Read Error Rate at 80% health and Controller Hardware ECC Recovered at 32. The other drive is showing Surface Read Error Rate at 67%, Surface Seek error rate at 51%, and Controller Hardware ECC Recovered at 40%.

Have I got reason to be worried as these drives are only about 3 to 4 months in use. It is not showing any physical problem except that it is the slowest part of my PC rating at only 5.9 on the Windows Experience Test.

A:Seagate Drive Problems???

Download and run SeaTools, Seagate's diagnostic software. If that says there are major problems, I'd look into RMAing the drives. I've heard in the past that Seagates higher capacity drives have a higher fail rate.

Read other 8 answers
RELEVANCY SCORE 44.8

This might be a silly question, but I have a Seagtate Barracuda 7200.7 hard drive 160GB that came out of my very old Dell desktop.

Is there any way this can be connected to my new desktop as an external drive?
 

A:Seagate Hard Drive

Read other 6 answers
RELEVANCY SCORE 44.8

Hi-

I have a 40GB Seagate I would like to use in a system and I can't seem to format it. It is an ST340810A. I have all the jumpers done correctly but whether I attach it via USB or IDE it is not recognized. I have used the Seagate disk wizard (which does find it and goes through all the steps but doesn't format it). I have tried hooking it on to the primary IDE cable as master and rebuilding via and old win 98 disk but it comes back and says it can't format it. I have tried to use manage storage via a right click off of my computer- it shows the disk but no info on it and along with the seagate wizard software says no sectors, etc. I have two st340810A disks and they both act the same. I have tried to put them in multiple computers with multiple OS's- to no avail. The disks are spinning up. I got them out of HP DE100c systems (linux systems). Any ideas on how I can get these working and formatted w Fat or NTFS?

Thanks

Koetsu13
 

Read other answers
RELEVANCY SCORE 44.8

i get "An error was detected on device \Device\Harddisk3\D during a paging operation."

when i am copying files from / to USB drive - Seagate 500G Go drive. . .

the files always seem ok. . . hard drive doesn't show errors with chkdsk. . .

any ideas.

thanks

sportsguy

A:Seagate USB drive errors

do you always have it on the same usb port?

maybe the port is going bad or goofy. try it different ports and see if that fixes the issue.

Read other 3 answers
RELEVANCY SCORE 44.8

I have recently bought an external Hard disk by Seagate of 1tb. Now I have a desktop as my home which has the hard disk capacity of 500 GB. The problem has started is that the moment I plug in the External disc it fails to load and do not auto run either, where as any other Capacity hard disk freely loads and auto runs by uitself. I dont understand why. Now again I run the same Disk (1TB) to other system of less capacity storage it runs smooth without any flaws, please suggest

Regards
 

A:My 1TB Seagate drive not readable

Try to download/install/run seagate discwizard from http://www.seagate.com/as/en/support/downloads/discwizard or seagate seatools for diagnostics from http://www.seagate.com/as/en/support/downloads/seatools

entertain the possibility of a failing usb port.
try to use other usb ports on the back of the motherboard and not the usb ports located in the front panel of your (desktop) computer.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hey guys. I have a 300 gig Seagate drive. Well its not been working for a few months.

I am 100% sure its nothing to do with the drive itself coz believe it or not, I haven't MOVED my drive from my desk since I bought it. I'm pretty sure there's some loose connection somewhere inside the drive as sometimes it does show up.

Well, I sent it to Seacare and after 2 weeks, they returned it. And guess what? I still wasn't working! Same problem.

The thing is, the drive doesn't show up on my Mac. I've tried every possible troubleshooting method without success.

I was thinking, what if I opened up the drive? I could just break open the plastic and see what connections were loose. Is it possible to do that, remove the metal drive from inside and connect it using new wires? I AM really desperate, so..
 

A:Seagate Drive problems!

Read other 8 answers
RELEVANCY SCORE 44.8

Why won't my Acer Extensa laptop running Vista Home Prem. let me initialize a new SATA internal 320GB Seagate hard drive?It says device is not ready.When i hook it up to my XP laptop it initializes.

A:Seagate hard drive

are you doing it from the administrator account?

Read other 3 answers
RELEVANCY SCORE 44.8

I saved all my documents, music and photos from the school laptop (Mac) and now I need to use them on my home PC. The problem is when I connect my Seagate to the PC, I'm not getting the drive icon to select the things from the Seagate. What should I do?
 

A:Seagate external drive: from Mac to PC

Check Disk Management and see if the drive is visible. You may just need to assign a drive letter to it.
 

Read other 2 answers
RELEVANCY SCORE 44.8

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

A:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

Read other 1 answers
RELEVANCY SCORE 44.4

Hello.

I was having troubles with Tapeware, the backup app that shipped with my drive (Seagate STT20000A), but I'm starting to think the problem might be the tape drive itself.

Under Windows 2000 Pro, I deleted the drive from Removable Storage>Physical Locations. When I reboot the drive is listed twice, both occurences with a fat red X through the icon. If I leave it as is and reboot again, there will be four instances of the drive under Removable Storage. Of course, none of them work.

Does anyone have suggestions? Possibly the drivers for the tape drive?

Cheers!
Kevin
 

A:Problems with Seagate Tape Drive

Hi,

Please let me have an e-mail address by PM.

I have a long e-mail from Seagate detailing issues with this drive.

I'll then send you this e-mail, plus the URL for my own web space where I have a 5 mb ( = 4 floppy disk ) driver file, plus the other two file mentioned below as a zip file.

The file is latest Seagate driver for the STT20000A TBU, I don't use it as XP runs it without any issues. The other two files are a hardware / firmware update and DOS test utility.

hth

Ceri
 

Read other 1 answers
RELEVANCY SCORE 44.4

Is this 300 GB Seagate a good external hard drive?:
http://www.amazon.com/gp/product/B000EN62YG/sr=8-3/qid=1154971809/ref=pd_bbs_3/103-3008107-9730230?ie=UTF8

Also, can external hard drives purchased on Ebay be trusted?
 

A:Seagate external hard drive

Read other 8 answers
RELEVANCY SCORE 44.4

Hello,
When attempting to back up files to my new external drive, the drive was not recognized by my computer. After reading other threads, I was able to assign a drive letter via disk management and run a backup. My question is, do I need to go thru this exercise EVERY time I plug in the external drive via the USB? Is there a way to make the drive map permanent? I had to do this again today to see the external drive with a drive letter via Start menu /Computer

A:Seagate 2TB external drive not recognized

When you buy a brand new drive from the shelf, there is no partition or partition letter on the drive. That you have to assign once and it will be good for the life of the drive (unless you change it later).

Read other 7 answers
RELEVANCY SCORE 44.4

My seagate expansion desktop external drive seems to be dying. Its only a year old but i've filled it upto 90% of its capacity and that is when the problem started. Drive will show in my computer, disk management and even folders/files are visible/accessible but somehow i cant copy them. If i try copying, i'm slapped with extremely slow transfer speeds as below. Besides that it wont read some of the files so i have to skip them

I have even tried recovery programs and all of them recognized the drive properly but couldnt recover anything. I'm on win7 x64 and I feel there is a problem with the usb enclosure and so i want to pry it open and connect to the computer just like an internal drive. Can i do that without voiding the warranty?
 

A:Seagate 1tb external drive failing?

Read other 9 answers
RELEVANCY SCORE 44.4

I couldve sworn I posted this question over a month ago but I cant find it anywhere. Not surprising, I dont remember where I parked my car. I might have posted it to airheadsЯus.com for all I know. I have several Seagate 3TB STBV3000100 Desktop Expansion drives. I realize this question might be better suited for the Seagate support forums but I get this weird message when i try to login:

Login Error, your attempt using single sign on with an identity provider certificate has failed. Please contact your salesforce.com administrator for more information.

I have absolutely no idea what any of that could possibly mean. But that is neither here or there.* Its just that I am becoming desperate and Im hoping the huge wealth of knowledge here in sevenforums might offer some assistance. The drive has been working fine for over a year (just a little longer than the warranty of course). Suddenly it disappears from the drives listed in Win 7 Pro. I have tried switching out the data and power cables and USB ports and tried this on different Win 7 computers. When it powers on the blue activity light comes on as it should and I can hear it spin up Within a couple of minutes, the light goes off and it spins down. During this period Win 7 does not see it at all. Both the data and power ports seems physically stable from what I can tell from simple observation. I have not taken it apart (yet). If anyone could offer any suggestions on what my next step should be I would be extremely ap... Read more

A:3TB Seagate Expansion drive does disappearing act

Has the data on there been backed up? And after its disconnected and plugged back in does it turn back on but then off again

Read other 2 answers
RELEVANCY SCORE 44.4

I have a ASUS Sabertooth 990FX R2.0 motherboard, running Windows 7 home 64bit, With a WD sata drive as the boot drive. I installed a Seagate Barracuda 3TB SATA drive for backup/storage. The problem is that the large backup drive is not seen in "computer". It is seen in device manager as well as in disc management under admin. tools, but only as a partitioned drive between approx. 2 TB and 1TB unallocated. There is no drive letter assigned to this drive under Disc management. Two questions, one, how do I get the 3TB backup drive to be recognized from "computer"? and two, can I format the 3TB drive to only have the one 3TB partition? Thanks so much in advance for all you guys do to help numbnuts like me! Any response is well appreciated!
 

A:Solved: Seagate 3TB SATA drive not seen

Read other 16 answers
RELEVANCY SCORE 44.4

I purchased a Seagate 1Tb external drive that came with "Seagate Dashboard" software to manage back-ups. What I would like to do is create 2 500Gb partitions and use my Acronis software to make mirror images of both my desktop and laptop. Is this do-able? Would it be advisable to delete the "Seagate Dashboard"?

Thanks for any advice.

A:Format Seagate external drive

Simply just plug it in and do a format. It took you longer to ask how to do this, than it would to have just plugged the drive in and right click on it after it loads in Windows Explorer, and choose "Format".

Read other 5 answers
RELEVANCY SCORE 44.4

System info
EVGA Classified SR-2 Motherboard
EVGA GeForce GTX 570 HD 2560MB Video Card
2x Intel Xeon E5520
60 Gig SSD Hard Drive
2TB Seagate Hard Drive
i want to hook up another 2tb hard drive it wont show up in my computer

Im having problems connecting a seagate hard drive this is what shows up in the safely remove option ST2000DL00 39VT166 2TB but it wont show up in my computer i cant figure out the prob
 

A:Seagate Hard Drive Prob

Read other 12 answers
RELEVANCY SCORE 44.4

Hi guys...I am having a big problem..you guys have to sort it out and tell me the what can i do to solve the problem...

The problem is..

I have seagate expansion portable drive of 1tb..which worked fine for somedays....but now i am got stuck with that...bcoz when i connect my seagate drive to usb and green light goes on and a safely remove icon also coming but there is no drive in the my computer and disk management also...When i searched some forums i got the same problem is having by others and got there a statement regarding to check whether drive is spinning or not...after that i found my drive is not spinning and i thinking a way to make it spin and to get all data back to my lap....

And also i had checked with uvcview usb viewer [by microsoft] when i connected my drive it shows the drive and also some other descriptions which i dont know...

So you guys help me to make the drive works and to get my data back....thanks in advance for your help guys....
 

A:Seagate Expansion Portable Drive

Read other 9 answers
RELEVANCY SCORE 44.4

I updated to Windows 8.1 a couple of days ago on my desktop. Windows 8 was installed last June. I have a Seagate Free Agent GoFlex external drive connected to the computer for daily backups. Since upgrading to 8.1, this drive has been shutting itself off and then restarting at seeming random times. This event is accompanied by a soft buzz apparently coming from the desktop tower.

Anyone having similar experience? There are identical comments on Seagate's forum now but no answers.

Thanks,
Seattlerust

A:Seagate External drive shutting itself off in Win 8.1

Do you have any power settings for USB devices set in your Advanced Power Settings... Try shutting off the USB selective suspend setting.

There is also a setting for Hard Drives, you can put them on a timer. You might want to check yours, see if it is set to a low value, if it is, increase it to 30 minutes or so.

I thought GoFlex drives connected through Wifi?

Read other 4 answers
RELEVANCY SCORE 44.4

Hi,

I have a 4TB seagate drive that turned RAW today Want me to format it...

After a couple hours of reading, i found that i have the same problem as this guy :

External HDD suddenly requires formatting, read as RAW instead of ntfs

Jumanji helped him alot and in his post (page 6 of the included link), this note seems to be important but i don't know Bootice at all and it's all gibberish to me. Could someone help me understanding what he meant by this :

As a natural corollary of the above exercise I would suggest the following to the OP.

1. Check the last sectors of your Disk from n to n-32 with Bootice. If you find that the GPT backup exists in those sectors, I would say you have struck gold.

2. Save each sector starting from n to n-32.

3. Restore the nth sector to LBA 1 (sector 1), n-1 to LBA 2 and so on till you complete n-32 to LBA 33.

Effectively you would have restored the GPT, and Windows 7 should be able to see your drive as before.

I would be very grateful if someone could do a step by step to do this with pictures maybe using Bootice.

Thank you in advance

A:4TB Seagate drive in enclosure suddenly became RAW

Welcome to SevenForums.

My first instruction: Don't panic. Your data is still there.

My second instruction: While you can read as much as you can - I see you reading the thread "Lost Partitions' - do not do anything on your own in a hurry.

I shall be back after another hour.

( you can go to sleep now and see my post tomorrow morning. That also gives me time to compose my post)

Read other 8 answers
RELEVANCY SCORE 44.4

Hi all,

I have two 4TB Seagate Backup Plus drives, I sat the drives to go to sleep after 3 min in Seagate Dashboard program, the drives do go to sleep but the LED lights won't turn off, they are always on?

But if the same drives are connected to my iMac, they goes to sleep mode and the LED lights turn off.

What do you think the issue is?

Regards,

A:Seagate Drive LED light won't turn OFF

Just out of curiosity, when the drives go into sleep mode do the LED lights either change color (ex: green to amber or yellow) or do the change their blink rate (solid light when not asleep, blinking light when in sleep mode.) Perhaps these Seagate articles can offer some help.

Memeo Premium/Instant - How to adjust drive settings (sleep, lights, diagnostics)

Seagate Manager: FreeAgent Drive Light States and Options

Read other 2 answers
RELEVANCY SCORE 44.4

i need help to recover my old photos and videos that were accidentally deleted in my seagate external harddrive while i was trying to format using my macbook 2011. what would i do?
 

A:Seagate external hard drive

Give this a try

http://www.piriform.com/recuva

Good Luck I hope it finds them all used it on the wife's system once and it did recover almost all .
I'm not sure if it works on usb drives or not though worth a try to see if it discovers it .
Yes it does .
 

Read other 1 answers
RELEVANCY SCORE 44.4

New to the forum and I have a silly question regarding my external hard drive which cam with no instrucions or information other than an istallation page.

It is product number 9bd862-560. Question, can I leave this on indefinately or is this something that should be turned off daily. I have a program set up to automatically save information so ai need to know for scheduling purposes. Any help would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 44.4

Hello
I have a 4TB USB 3.0 Seagate Expansion Drive which dosn't seem to be working.

On File Explorer on "This PC" the drive is recognised as E: Local Drive when previously it was recognised as E: Seagate Expansion Drive

Then I click on E: Local DriveThe PC will think about it for a very long time then the file Explorer will stop responding and eventually the screen goes black except for the mouse and will only start working again when I unplug the drive.

The Device Manager recognises as a Hard Drive as a Seagate Expansion Desk SCSI Disk device
The Disc Management recognises the drive as E: system Raw

The Drive was plugged into a Readynas 104 for a long time but it stopped being detected on there.
The drive was almost full

Thanks in advance
 

Read other answers
RELEVANCY SCORE 44.4

we have one of these for the Smart TV - which works great for that, but I thought I would be able to take it to my computer and copy my photos onto it. I have plugged it into my computer but am unable to see it as a drive - any ideas why?
 

A:seagate Expansion Desktop Drive

Read other 8 answers
RELEVANCY SCORE 44.4

Hello forum, my Seagate external hard drive which i thought had burnt actually works. But there is a problem, I remember it used to have all its lights shining before, at least sometimes. Also it makes noises sometimes and sometimes it does not. So I thought it got spoilt because when i used to plug it there were no lights and no sound.

Now i still get the same reaction but i miraculously can access the files, so it did not burn right?

Also i have some ''backups'' maybe two but there are some files which are mixed with the original files from the Seagate external hard drive, so i dont know 1) if i should remove anything or place it somewhere else 2) if removing or deleting any files will affect anything in the backups or in the external hard drive. Some files are mixed with the external hard drive files so i dont know how to separate them

Also, i dont know what the external hard drive files do, and what to do if i ever accidentally delete them. I do not remember having a manual for it, maybe i lost it, but i dont have it now also i do not have the box...So i do not know which model it is

Read other answers
RELEVANCY SCORE 44.4

What pin positon do I use for making my 220 gig seagate hard drive my slave drive? It says chech the manufacture for settings, but i Wasn't sure where to look.

Thanks!
 

A:20gig seagate hard drive

Read other 6 answers
RELEVANCY SCORE 44.4

I have recently had a new desktop PC. Prior to that I had a laptop where Seagate external drive was permanently connected via a USB port. I was running Win7, using FF browser and WLM.
With the new pc if I leave Seagate connected I can't boot up - the screen stops at BIOS. Everything seems to be running properly as long as I don't keep the external hard drive connected until boot up is complete.
What can I do so that I don't have to keep disconnecting Seagate each time I shut down?

Hope someone can help and that the solution is an easy one. Thanks.
 

A:Seagate external hard drive

Read other 15 answers