Over 1 million tech questions and answers.

Belkin USB Dockstation Driver installation problem

Q: Belkin USB Dockstation Driver installation problem

I just purchased a Hi -speed USB 2.0 Dockstation by Belkin. When using the install disk to install drivers I recieve the following error message
"an installation support file C:\leslie~l\locals~\temp\{EB145CEA-998F-4C9DAEF7-B4DBBD217DAF}\lsrt.dll could not be installed. Access is denied.

Can anyone help me with this problem???

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Belkin USB Dockstation Driver installation problem

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 75.6

I am attempting to dock an Acer Aspire 5723Z laptop running Windows 7 64-bit into the Belkin Hi-Speed USB 2.0 Dockstation Model # FSU216 which the supplier provided with the laptop as being compatible.

When the devices are connected, the (Edge10 GB19XX) monitor display switches off when I close the laptop. The screen resolution does not always readjust.

In Devices in Control Panel under Unspecified it says IEEE-1284 controller USB hub ? ?Needs troubleshooting?.
If I right click and click ?troubleshoot? it says the driver is not installed. When I click ?apply this fix? it tells me the driver was not successfully installed. If I click ?skip this fix? and then ?view solution? it says ?a solution is not available for this problem.?
When I originally attempted to install the drivers from the disk I got an error message that it did not have permission to copy a particular file. I tried to uninstall the device a number of times. Each time I went back though control panel afterwards, it asked me again whether I wanted to uninstall the device, which implied that it had not been successfully uninstalled the previous time.

Belkin claim they don?t have drivers for Windows 7 64-bit - only for Vista 32-bit.

Does anyone know a way to get these devices interoperating so that the display works properly?

If not, does anyone know of a docking station which will work OK with this laptop/OS?

Regards Keith

A:Display problems with Belkin Hi-Speed USB Dockstation

Wow. Except for the model number on your laptop, you and I have exactly the same problem with exactly the same docking station--the VGA support for Win7/64. I got around it by using the HDMI port on my laptop and hooked in a small HDTV I wasn't using. Does your device support HDMI? It's one way around the problem.

Also, have you been able to get your printer to work via the parallel port? Mine won't send the page to the printer.

Read other 1 answers
RELEVANCY SCORE 58

Hi i have BELKIN N1 PCI card (F5D8001uk) and i was wondering because i have many problems with this drivers (latest from site) if there is any other driver.

I heard about some models works better with RALKIN drivers. Is that true ? And if so does anyone knows which drivers is suitable for my card ?
 

A:Belkin driver problem

i had the same problem and decided to ditch belkin completely. Got a sweet new Zyxel router and adapter... and it was worth it
 

Read other 5 answers
RELEVANCY SCORE 50

Hi

I desperately need assistance to setup my Belkin ADSL Modem with High-speed mode wireless g router, model # f5d7633-4 on my Sony Vaio Laptop with Vista.

Can anyone please help me? I downloaded the manual, but with not much luck, they only refer to Windows XP / 2000 / 98. I know the basic settings are not that different, and it seems like i get my router setup for wi-fi, but the internet connection doesnt happen.

I have already done a firmware update on the router.

Thank you

Wilma

A:Belkin Router installation

what type of connection do you have?
Cable or DSL

Read other 2 answers
RELEVANCY SCORE 49.2

hi, ive just wiped the hardrive on my spare laptop and reinstalled windows xp and now i dont have a driver for my wireless or ethernet
i know what the driver is for my wireless RTL8187 and have fonud plenty of downloads for it but they all seem to be on an autoinstall thing but as i cant get on the net on the laptop i need it on i really dont know how i can download it to another pc then install it on the one i need it for.... any idea's?
thanks
Dave

A:driver installation problem please help

Do you have a CDRW drive or flash drive?

Read other 4 answers
RELEVANCY SCORE 49.2

Hi... i've got a Intel D945GCPE Mother board with Realtek audio chipset (some HD Audio device it says). I've Installed Windows XP 2002 Professional SP1.

Problem is that the audio driver provided with the motherboard doesn't work when installed in XP. it rather doesn't install successfully and installation stops displaying an error containing text (not exactly) as HD Audio driver installation failed.

i've downloaded audio driver from intel's site "http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2838&OSFullName=Windows*+XP+Professional&lang=eng&strOSs=44&submit=Go%21"
as well but that driver shows the same behavior as well...

the driver works well with Windows Vista Ultimate

help needed
 

A:Driver Installation Problem

Read other 16 answers
RELEVANCY SCORE 49.2

I recently upgraded my old hand-me down computer to an AMD Athlon 1700+ with 1GB ram and a 128 meg video card. I origionally thought I would have problems dealing with the bios, but that wasn't the case.

However, when Win 98 started (yes I need to upgrade), it started the normal plug-n-play driver search for all the motherboard hardware. What the problem was when I tried to access my CD rom drive, the computer didn't recognize the drive, so I couldn't access my CD rom to install the drivers from the CD.

Here's the info I have: the hard drive and CD rom drive are all what I had before the upgrade, so there shouldn't be any problems here, the bios recognizes both the hard drive and the CD drive on startup.

All I need is to find a way to access my CD-rom drive to install the drivers and I'll be set.

Any help?
 

A:Win 98 driver installation problem.

goldwing388

You may want to try this:
1. Power down the machine
2. Insert your boot floppy
3. Power up your machine
4. Choose option #1 Startup with CDrom support---hit enter
5. At the A:\> prompt type "sys c: (put a space between sys and c)--hit enter
Computer will transfer the startup info from the floppy

When you see:
A:\>sys c:
System transferred

Simply power the machine off, remove the floppy and after a few seconds try to power up.
 

Read other 6 answers
RELEVANCY SCORE 49.2

Howdy y'all,
I'm trying to install the drivers for my USB hub, and I'm getting the following message:
==========================================================
Completing the Found New
Hardware Wizard
----------------------------------------------------------

USB
An error occurred during the installation of the device.

The installation failed because a function driver was not
specified for this device instance.

==========================================================

OS:> Windows 2000 SP 4

Does anyone have any idea as to how I should specify a function driver?
Thanks,

Wylbur
===========================
 

A:USB driver installation problem for hub with Win 2k

I think something is wrong with the device, the cable or the port you are using.

Can you experiment with a different cable or port and test the device on another computer as well?
 

Read other 3 answers
RELEVANCY SCORE 49.2

Greetings,

I’m having a problem installing a driver for my USB device(Playstation Portable). I’ve downloaded the driver from 3 different sources, plus had a friend verify it on his PC so I know for a fact that the driver works.

Is there a way to install it manually using CMD? Can Devcon install the driver? If so, please post the commands for it.

Any help is appreciated.

System Info:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)

 

A:Driver Installation Problem

Welcome to TSG

you can use brute force:

in the dialog box shown in image 4, choose Don't search. I will choose the driver to install and continue.
 

Read other 2 answers
RELEVANCY SCORE 49.2

I just got a new computer(second hand so it doesn't have a manual and all that) and I have a widescreen monitor with it. It was working fine but after I was messing around looking it up, I somehow deleted the driver.

There were 2 drivers or whatever I remember and now on the Add or Remove programs place, there is only one left, which says: Intel[R] Pro Adapter and Drivers. Now when I go to change the resolution, there is no resolution for widescreen so it stretches.

A friend tells me that I need to install the driver(Intel(R)) because thats what my graphics card is for so I downloaded a driver(Intel[R] Graphics Media Accelerator) from the Intel website but when I go to install it, after the accept and decline part it has an error and says "one or more files that are required for installation are either missing or corrupt. Setup will exit".

What files am I missing? or is it that I just downloaded the wrong driver? If so, how do I know which driver to download and install?

The computer is Windows XP.

P.S. When I try to install Windows Media Player 11, it says that there is an error and that no updates were found. is this related in any way? Note I copied the setup onto the computer from a different one, it was downloaded directly onto the computer.
 

A:Driver Installation Problem

Read other 16 answers
RELEVANCY SCORE 49.2

Hello,

I am having trouble trying to install an Linksys 10/100 Ethernet USB Network Adapter.

The instructions for installation are as follows.

1. After connecting the adapter Start computer.

2. Windows will automatically detect the USB LAN Network Adaptor in your computer.

3. When the Add New Hardware Wizard screen appears insert the Driver CD into your CD rom drive and click next.

4. Select search for the best driver for your device and click next.

The mistake I made was instead of clicking next I accidently clicked cancel. That closed the driver installation process down. I re-started the computer to try the installation process again but it will not reconize the new device so I can install the driver. I have tried a several times restarting the computer but nothing happens.

Is their any way of correcting my mistake and getting the drivers installed so the adapter will work?

Thanks,

Dave
 

A:Driver Installation Problem

Read other 10 answers
RELEVANCY SCORE 49.2

Hello vistaforums family,

this's my first post here, so i'll be glad if you guys help me on solving this problem.

I've an hp dv6-1110et model number. I've made a clean installation of windows vista h.premium 32-bit (already created recovery dvd.) now my problem is, when i'm trying to install broadcom wlan drivers on the retail vista, i get errors of no wlan device is found on your system. I've tried to install drivers manually from device manager, showed path of extracted wlan drivers but no luck. got error code 10. i've asked a friend of mine and says, i get this error because of system build number difference. now is there any possible way to install my wlan drivers i've downloaded from hp.com?

Read other answers
RELEVANCY SCORE 49.2

NOT ABLE TO DOWNLOAD ANY APP,FILE OR DRIVERS IN MY HP NOTEBOOK.ANY APP OR FILE WHEN DOWNLOADED THEN AN ERROR MESSAGES COMES AS THIS FILE COULD NOT BE DOWNLOADED.WHEN I TRY TO DOWLOAD ANY DRIVER THEN ALSO SAME PROBLEM.TWO DAYS BEFORE I DOWLAODED GOOGLE CHROME BUT NOW IT IS NOT OPENING,I HAVE TO WORK ON INTERNET EXPLORER ONLY.I AM USING WIRELESS NETWORK.

Read other answers
RELEVANCY SCORE 49.2

Not quite sure where this one was supposed to go, so if I've put it in the wrong place, I'd appreciate helping a newbie out and moving it. Thanks!
 
I have a compuer with windows 7 pro that doesn't seem to recognize the printer I'm trying to install (HP LaserJet P3005d). It's a local connection using a USB port, so it should install the driver automatically, but it fails to do so. I've tried to install the universal drive manually through HP's support site, but it still doesn't seem to want to recognize the driver.
 
The computer simply lists it in the device manager as "Generic USB Hub," but that's all it will do. I've tried to unistall it from device manager, then taken steps to install it manually, then plug it back in. Still nothing. Does anyone have any advice? Has anyone run accross this problem? I'm completely stumped here.

A:Driver installation problem

Hi GhostPoop Let's see if you haven't other drivers that requires attention before installing the ones for your printer.MiniToolBoxDownload MiniToolBox and move the executable file to your Desktop;Execute MiniToolBox and check the following options:List Installed Programs;List Last 10 Event Viewer Errors;List Devices - Only Problems;List Users, Partitions and Memory size;Once this is done, click on Go and wait for the scan to complete;Once the scan is complete, a log will open. Please copy/paste the content of the output log in your next reply;

Read other 1 answers
RELEVANCY SCORE 48.8

I am having trouble with the installation of a Belkin network adapter on my PC. I run Windows XP home edition. I have a dynalink ADSL modem installed. Everytime I install the Belkin network adapter my system crashes and shuts down. If I uninstall it everything works fine again. I am following the instrcutions in the manual. I get a blue screen saying windows needs to shut down to prevent damage to my computer. The error message is
Driver-IRQ not LESS or EQUAL.
Am I right in assuming it is a IRQ conflict and if so how do I go about rectifying this as when I install the network adapter my system crashes so I cannot go into anything to change any settings. Thanks in advance.
 

A:Belkin network adapter installation problems

Read other 6 answers
RELEVANCY SCORE 48.8

Hi, this is my first post here so be gentle!

Recently I got a bluetooth 4.0 dongle from ebay (china, so that might be my problem right there). I figured if my phone has 4.0, might as well use it to its full potential. Now I can install the drivers fine, windows seems to find them by its self, but the only option I have is connect to access point. No file transfer option, which is why I got it in the first place. If I double click my phone in the bluetooth window it brings up a properties page with no useful information on it, but under services it says "android sms" and when I put a tick in the box it tries to install another driver but fails to find it. I've looked around and can't find one for it anywhere. It's a generic CSR 4.0 bluetooth 4.0 dongle.

The CD that came with the dongle has something on it called bluesoleil, and I did try using it but it's terrible and seems to disable the windows bluetooth stuff and put its own over the top. That I don't mind, but for the latest bluesoleil software that supports call and sms handling it's another ?20 and I resent having to buy it when it should have been shipped with the dongle in the first place (which was only ?5 anyway!) When using bluesoleil, it doesn't have any problems with drivers and I've tried pulling the driver out of the program and uninstalling it to get back to windows bluetooth stuff but I had no luck. So anyway, does it sound like a knackered dongle or am I doing something really stupid to stop i... Read more

A:Bluetooth 4.0 driver installation problem

Welcome to SF jimbo1531.
I'm no Blue Tooth expert, but when a device won't work I try these steps.
Uninstall any driver or software associated with it, reboot and see if Windows Update will find and install drivers.

Read other 2 answers
RELEVANCY SCORE 48.8

Hello.

After switching from win7 home 64bit to win7 prof 32bit version i have problems installing drivers for 2 devices:

1. base system device:
PCI\VEN_1180&DEV_E230&SUBSYS_9069104D&REV_00
PCI\VEN_1180&DEV_E230&SUBSYS_9069104D
PCI\VEN_1180&DEV_E230&CC_088000
PCI\VEN_1180&DEV_E230&CC_0880

2. network controller:
PCI\VEN_8086&DEV_422C&SUBSYS_13018086&REV_35
PCI\VEN_8086&DEV_422C&SUBSYS_13018086
PCI\VEN_8086&DEV_422C&CC_028000
PCI\VEN_8086&DEV_422C&CC_0280

is it possible to run these in 32bit? Could you help me finding the correct driver?

Thank you very much!

A:Driver Problem after installation 32bit

  
Quote: Originally Posted by alac79


Hello.

After switching from win7 home 64bit to win7 prof 32bit version i have problems installing drivers for 2 devices:

1. base system device:
PCI\VEN_1180&DEV_E230&SUBSYS_9069104D&REV_00
PCI\VEN_1180&DEV_E230&SUBSYS_9069104D
PCI\VEN_1180&DEV_E230&CC_088000
PCI\VEN_1180&DEV_E230&CC_0880

2. network controller:
PCI\VEN_8086&DEV_422C&SUBSYS_13018086&REV_35
PCI\VEN_8086&DEV_422C&SUBSYS_13018086
PCI\VEN_8086&DEV_422C&CC_028000
PCI\VEN_8086&DEV_422C&CC_0280

is it possible to run these in 32bit? Could you help me finding the correct driver?

Thank you very much!



If you are running 323 bit you have to. Take the PCI output and check what it is here. PCI Vendor and Device Lists

Good luck

Read other 2 answers
RELEVANCY SCORE 48.8

After i saw ATI had released catalyst 10.10 i decided to update. I uninstalled the drivers restarted my computer i installed 10.10 (and something went terribly wrong around this point i guess)
I got this after installation

and i restarted the computer again but after that nothing works - i can only use window's Standard VGA Graphic Adapter.
I tried removing Visual C++ both 2005 and 2008 cause i though they might be the problem. Didn't work..reinstalled them,not working again, tried to go back to 10.9 cause i though it was 10.10's fault but i got the same problem.
Last month i tried a different VGA on my PC and back then i didn't have any problems at all.
I have no idea what caused this to happen i don't think i made any mistakes..
I use Windows 7 64bit, VGA is HD4770.

A:Problem with video driver installation

Use system restore to return to the good times. Then post for instructions.
System Restore

Read other 5 answers
RELEVANCY SCORE 48.8

I'm trying to install windows 8, but on the beginning i'm getting error like:

"Brak wymaganego przez system nośnika sterownik?w" which simply means missing driver. About the description - it's about missing cd/dvd or disk driver. Still, when it makes me to found them, i have access both to my partitions and CD. I've never installed any disk / cd reader driver - windows have them built in.

What i'm supposed to do?

A:Windows 8 installation driver problem

It might be a problem with the install media.

Could you give a little more detail about your system and how you are installing, and on what?

Read other 3 answers
RELEVANCY SCORE 48.8

When I first connected my iPod to Vista it installed the "necessary software" but later stopped working. When I restarted the computer, the drivers wouldn't install. I tried it in different USB ports and finally got it working, except now when I connect the iPod I get "there may be a problem with this device. Scan (recommended) or continue without scanning. I close this box and the iPod seems to work fine, but this error message consistently appears. I did have a flash drive installed and it seems that the iPod drive is now the same drive letter as the flash drive was. Could this be the cause of my problem, and if so how do I fix it?
Thanks.
Dave Ward

A:iPod driver installation problem

---Hello: I found this page here, click to read--->Ipod Vista Drivers? - iPod - Music---(please post your results)---thank you---

peace

Read other 14 answers
RELEVANCY SCORE 48.8

I'm trying to install an older version (61.77) to fix some compatibility issues with a game. The problem is, after installation, the device manager lists the driver as 66.84 (the version that came with my PC, I believe). The installation was completed properly and I didn't receive any error messages.

The card is a GeForce 6800, if it matters.

Any ideas on what went wrong?
 

A:Nvidia driver installation problem

Use this http://www.drivercleaner.net/ Also check with the game developer to see if there are any patches or updates for the game.
 

Read other 2 answers
RELEVANCY SCORE 48.8

graphics card installation problem , how to update ? 15ac122tu notebook . windows 7 ultimate , 64bit

A:graphics driver installation problem

Hi: You can try the graphics driver directly from Intel.  The 2nd one on the left is for 64 bit. https://downloadcenter.intel.com/download/25818/Intel-Graphics-Driver-for-Windows-7-8-1-10-15-40-?pr... If that doesn't work, you will have to wait to see if HP releases one on your notebook's support page.

Read other 1 answers
RELEVANCY SCORE 48.8

Operating Sistem Windows 8 Pro x64

Motherboard Asus M5A97

Hello , I've been scouting the internet a lot for answers ; unfortunately found none for Windows 8.Trust me , I really searched and tried solutions , but didn't work.This is the message I'm getting for EVERY new driver I try to install or , update old ones after unistalling :"Windows encountered a problem installing the driver software for your device.Windows found driver software for your device but encountered an error while attempting to install it.Realtek RTL8139/810x Family Fast Ethernet NIC . The system cannot find the file specified ". I know the card is old but it worked before, (fresh Windows installation) , I get the same error if I try to update ex: the audio drivers.
This is how Device Manager Looks like:Normal, just ... I don't get it.
Tried both methods "Search automatically for updated driver software" / "Browse my computer for driver software".Nothing...
First I discovered the problem while updating Daemon tools ... Virtual Device wouldn't install.
I think I encountered the same problem in Windows 7 long time ago.Fixed it by deleting "infcache.1" in DriverStore, but Windows 8 doesn't have this file.
I keep the OS up to date.Antivirus : Kaspersky Pure 3.I really keep my pc clean and organized.
Do you have any suggestions?Beside re-installing Windows.Also tried SFC /SCANNOW, and the DISM command. Scannow found some er... Read more

A:Windows 8 Driver Installation problem

Did you visit the vendor's website to get the driver there ?

I tried letting Windows install a driver & it installed an outdated driver.

The driver from the vendor was what I needed.

Read other 2 answers
RELEVANCY SCORE 48.8

I am having a problem installing an Asuscom TA 280 USB onto Windows 98 first edition (with various MS Updates). The installation process proceeds normally and at the end makes like the devise is installed properly. There are no error messages throughout the installation. Once installed, I cheked the configuration and find that there are no drivers present for the NDISWAN Ports. There are 2 drivers present under Com Ports. In Device manager, the TA is showing correctly under ISDN Controller, but is not present as a new Network Adapter. I've tried unistalling and reinstalling etc but to no avail. Any help will be very much appreciated as I really don't want to format C:\ and reinstall Windows. Many thanks, Roger (Surrey, UK)
 

A:ISDN TA Driver Installation Problem

Some IDSN adapters work like modems, not network cards. Is this one supposed to act like a NIC? If not, try setting it up under Dial Up Networking. That was how I had to set up the first one I had.

------------------
Get free stuff and help out a poor computer tech:
http://www.rkfdcore.com/ebaypics/referrals.htm
 

Read other 1 answers
RELEVANCY SCORE 48.8

I've bought a Laptop recently, before this I used desktop.

I've bought a Internet Modem(Zoom Ultra) for my Laptop. But I can't install it. after connecting the modem to the USB the installation begins easily but after the completion of the Installation whenever I try to open the application it shows a Dialogue box saying :

"Installer.exe has stopped working".

Both my Desktop and Laptop is in Windows 7

Desktop : Windows 7 Ultimate x64
Laptop : Windows 7 Home Basic x86

Note : The modem runs well at my desktop

A:Modem Driver Installation Problem

This is a basic troubleshooting guideline to determine why there is no internet connection. Pay special attention to step 3, determining what IP address is being communicated from the modem to the laptop. You could also compare the IP address being used by the desktop since that machine is working OK.

How to Troubleshoot My Laptop Not Connecting to the Internet | eHow.com

From what I could find out, your ISP is Citycell, is that correct? And you are using a Zoom Ultra modem. According to the Citycell website, there are four different modems available: Harvilon ED 269; Huawei EC 122; Huawei Ec 167; and a ZTE AC682. Which modem do you have? You can probably get an online user manual.

Finally, you could probably contact Citycell Customer Care through their telephone help line, a walk in help center, or by email.

Helpline

Read other 3 answers
RELEVANCY SCORE 48.8

Hi, i've been bothered by this problem. Everytime i try to install ATI Radeon graphics card on my computer, it says "an unknown error occured. please restart ATI Catalyst Install Manager". I've been thinking where or what is the error. i've changed my OS thinking it will work if changed. By the way here's some question:

>is it possible to install ATI Radeon driver w/o it's card?

>can it be installed with an Intel 82945G graphics accelerator driver AGP?

here's my system specs:

OS: windows xp pro 2002 sp2
RAM: 1016 Mb ram
Sound: Realtek high definition audio driver
Processor: 2 intel @ 3.00 Ghz processor
Directx: Directx10 prefix

please help me! i can't play the games i want Thanks a lot for the response
****************************************************************************************************
if someone could read this who is from the philippines contact me if you can help pls... here's my number > 09129110983
 

A:Big problem with ATI Radeon driver installation

You could try running Driver Sweeper and then installing the ATI drivers. See how that goes.
 

Read other 2 answers
RELEVANCY SCORE 48.8

Hey all. Yesterday I changed my OS from Linux to Windows, but after the installation, Windows wouldn't connect to the internet. It tells me that there are no connections. I know for a fact that my internet is working, because its working on this computer. So I checked my drivers, and I got this.




I obviously can't update them due to lack of internet, so I can't think of anything else to do. Is there any sort of software that can fix this, or am I going to have to manually fix the drivers by downloading new ones?

A:Internet Driver Problem After OS Installation

You're going to have to manually download the drivers. At least the ones for your network card. Windows may be able to find the rest once the network card drivers are installed and you have an active Ethernet connection.

Read other 2 answers
RELEVANCY SCORE 48.8

Hi, i've recently been given my dads old digital camera, Sony DSC P51, and i've just tried to get my photos off of it, but the device driver won't install properly. I've tried going through device manager and telling it to try installing it again but it says "Windows found driver software for your device but encountered an error while attemping to install it.
Sony DSC
This device is not configured correctly. (Code 1)"

This happened when it tried searching the internet for new drivers and i chose the one from the list. Is it just that this camera is incompatible with vista or do i need to find drivers from somewhere else?

Any help appreciated, thanks.
 

A:Sony DSC driver installation problem

Ahhh Vista ..............

From this MS Website

Code 1
This device is not configured correctly. (Code 1)

To update the drivers for this device, click Update Driver. If that doesn't work, see your hardware documentation for more information.

Solution button: Update Driver

This code means that the system has not had a chance to configure the device. To resolve the problem, follow the instructions in the Device Status box. In addition, you may be able to resolve this issue by removing the device in Device Manager, and then running the Add New Hardware wizard from Control Panel.

So yes as you say its an OLD camera I would say Vista doesnt like the drivers....

Regards
 

Read other 7 answers
RELEVANCY SCORE 48.8

I am encountering a 'hardware could not be detected' problem after I've installed the wonder Pro TV card drivers. However, when I boot up my machine the XP Professional OS finds the hardware and request that the corresponding driver be installed, which in turn fails to find the TV card hardware. Please help.

A:Wonder Pro TV Card Driver Installation Problem

Hello Mashudu what make and model number is your TV card?

Read other 1 answers
RELEVANCY SCORE 48.8

Hi,

Just the other day I went to ATI drivers site to get the newest driver for my videocard. The file name is

wxp-radeon-6-13-10-6071-efg.exe
7.70-020418m-003815C-ATI
Windows Display Driver for ATI RADEON

According to its directions, I am to uninstall the old ATI driver, reboot, then run the setup.exe program to install the new driver. However, when I tried to uninstall the old driver through Add/Remove program, I got the message saying that old or non-ATI drivers could not be uninstalled (despite the fact that in the menu for Add/Remove, ATI Display Driver was displayed as an option).

So, I went into Device Manager and clicked Uninstall Driver. When the reboot prompt appeared, I clicked OK and rebooted. My screen looked the same so when I went into Device Manager again, I saw that the driver was not really uninstalled. So I disabled the driver first, then chose Uninstall again. I rebooted the computer again. The computer started but my monitor remained blank (black). However, I knew that the computer was working because I could hear the sound effects that I had set up when Windows XP starts. Also, I could still press CTRL-ALT-DEL, fumble with the tab key, and still shut down my system.

After many rebooting and seeing that the monitor would not display anything, I powered down my PC and installed a nVIDIA TnT2 32MB PCI card from my other computer into this one. I connected the monitor cord to the nVIDIA card and booted. The system started but with differences in monitor... Read more

A:ATI 7000/VE new driver installation problem

Using Safe Mode is the best option for this, since the VGA driver is used there, easier to remove AGP or video drivers. Still should manually select "Change" from adapter tab, on Display properties sheet. Change to VGA, reboot, get things working in Normal Mode, then try uninstalling old video driver- some comanies provide "driver destroyers" that help remove stubborn software. Myself, have never used any or any 3rd party helpers with old drivers.
 

Read other 2 answers
RELEVANCY SCORE 48.8

hello there, can anyone help please, i have an hp psc 1110 printer, and i installed the driver but it just says error occured during installation,rpc server error. there is no mention of my printer in control panel and it says print spooler error, any help would be great thanks joe h.
 

A:printer driver installation problem

Read other 7 answers
RELEVANCY SCORE 48.8

Hey ppl, Hendrich again. Before my previous ATI RAGE 128 PRO issue was fixed (Thnk You! ^^) but now I've got another one.

:dead: Yea, great, another one.

Anyways, when I try to install the driver for my card, it gives me a message saying that "Your video card does not match the driver provided by the installation" and then it closes. I want to know how I could install the driver for that card. Here is where the driver was:
http://ati.amd.com/support/drivers/xp/legacy-xp.html

Here is the page of where I could get the drivers for my ATI Card:
http://ati.amd.com/support/driver.HTML

(I picked Windows XP - Home/Professional then I picked Legacy [discontinued] then I picked Rage 128/Rage 128 PRO)

I have Windows XP Professional SP1 Version 2002. I was thinking maybe I should remove my driver then re-install again? No? Hopefully your ideas will be better then mine.
 

A:ATI Rage 128 pro driver installation problem

You really running SP1 this time?

Will try gettin to the bottom of this! I'll download and look into those ATI drivers to see what the driver installation is doing/looking for and compare to what ya got (Tho driver install files aren't always the easiest thing to interpret but give it my best shot)

I need collect detailed info on your current hardware and drivers

Click to download and run devcon.exe. It prompts to extract some files. Indicate folder C:\devcon. Verify it creates C:\devcon\i386\devcon.exe
Save my attachment devcmd.txt to your Desktop
Change its filename to devcmd.bat and double click to Run it
It creates a file devcon.txt on your Desktop. Please attach it in your next post.

 

Read other 8 answers
RELEVANCY SCORE 48.8

I have a Nvidia GeForce 8400M GS installed in my laptop model : NEC Versa P9110. Recently i found a bug on the driver provided originally from the CD which cause my monitor can't automatically turn off, hence i decided to download a new driver from Nvidia website. I try to install the new driver but the error occur, here is the error message "The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit." I have tried alot of ways to solve this problem and googling too still can't found any solution. Anyone know how to solve this kind of problem ?

A:NviDia Driver Installation Problem

Here's the correct drivers for Win 7 32-bit: NVIDIA DRIVERS 186.81 WHQL
for 64-bit: NVIDIA DRIVERS 186.81 WHQL

Recommend you download and run a free Driver Cleaner first.

Read other 9 answers
RELEVANCY SCORE 48.8

I have a Dell Dimension 3000 running Windows XP sp3. The motherboard is a Dell ON6381 running an Intel i865g/gv chipset. The Southbridge is an Intel 8380/eb/er (ich5/ich5r).

Whenever I boot up the computer, Windows notifies me that it has found an IDE controller, a primary IDE channel and a secondary IDE channel.

When it tries to install drivers, I get the following message “The specified service does not exist as an installed service”.

I have Norton Driver Manager software and have used it to reinstall the system board chipset drivers.

After reinstalling the system board chipset drivers, Windows once again notifies me that it has found an IDE controller, a primary IDE channel and a secondary IDE channel.

When Windows tries to install the drivers, I continue to get the message “The specified service does not exist as an installed service”.

Norton Driver Manager indicates the following drivers are either out of date or have a problem:

IDE ATA\ATAPI Controller

IDE Controller

SYSTEM DEVICE

Intel 82801DB PCI Bride 244E

UNIVERSAL SERIAL BUS CONTROLLER

2 Intel 82801EB USB2 Enhanced Hot Controller 24DD

I assume this is a registry problem but I not sure how to correct it. Any help would be appreciated. Thanks.
 

A:Windows XP sp3 driver installation problem

Read other 13 answers
RELEVANCY SCORE 48

i want to manually install the newest nvidia display driver on my system. problem is, after i uninstall old driver and reboot, windows automatically installs (within seconds) a wddm display driver that i'm assuming is already stored in some windows folder somewhere on my box. I believe this driver is included in windows 7. this driver is an older driver and i cannot access the nvidia control panel with it. i've googled 'preventing automatic install of drivers' and various other terms and they all point to 'turning off auto windows updates' . this isn't the solution. how the hell can i prevent windows from installing anything but a generic vga display driver, or prompting me with a few options of what to do? thanx very much.

A:Windows 7 Nvidia Driver Installation Problem

Don't worry about the newly installed default driver. Just install the new nvidia drivers. You'll then have everything you need.

Read other 8 answers
RELEVANCY SCORE 48

I've had a system running stably under Windows 7 for the last couple of years. There have been no hardware changes in that time.

Today I noticed that my DVD drive (Optiarc AD-7173S) was no longer visible.I checked Device Manager, which showed this message: "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"

I uninstalled the drive and rebooted. Windows attempted to reinstall it but gave up with the error message: "Device driver software was not successfully installed"

I uninstalled again and went through the registry, deleting all references to the drive. There were a couple of relevant entries that initially could not be deleted, so I got rid of these with the aid of PSTools. I rebooted the PC and once again, Windows' attempt to install the drive failed.

I've also tried the whole process in safe mode.

I'd be extremely grateful for some suggestions here as I'm getting desperate.

Steve

A:[SOLVED] Mysterious driver installation problem in Win 7

Have you used any registry cleaners in the past?

Read other 3 answers
RELEVANCY SCORE 48

I have a gateway laptop which came with XP home...i formatted it to XP professional. Then i did not find the wireless inbuilt adapter on the device manager...i downloaded the driver from the gateway website and installed it...but the devive manager shows that it is not installed properly. I have tried multiple installs, uninstalls and restarts on the same.

Can somebody advise?

Thanks!
 

A:Broadcom 54g Maxperformance 802.119 driver installation problem

i've seen quite a few physical switches on laptops that enable or disable the integrated wireless adapters. check yours thoroughly.
 

Read other 4 answers
RELEVANCY SCORE 48

Hi, all
I installed postgresql odbc ver 8.3.5 on my windows 7 home premium. Installation looks successful. But on ODBC data source administrator, I can't see the installed odbc driver. Don't know why. And I found it's installed in program files(86) folder.

A:problem about postgresql ODBC driver installation on W7

I found it by referring the following ...
There are two copies of odbcad32.exe on Windows Vista x64, one is stored at c:\windows\system32\ and one is stored at c:\windows\syswow64\. You need to run c:\windows\syswow64\odbcad32.exe to have access for all other ODBC drivers.

Read other 1 answers
RELEVANCY SCORE 48

HELLO everybody,

i recently installed an ATI radeon 9200 graphics card ( i didn't buy it, found it )
I tried searching for drivers but wherever i go and install the driver, the installation
gives me an error message saying setup was unable to find components that
can be installed on your current hardware or software configuration. Please make
sure you have the correct hardware or software.

I know i installed the card propely but i guess i am missing some software or it could be my integrated graphics chipset that has done something.

Please help!
Thanks
 

A:ATI Radeon 9200 driver installation problem

The 9200 is no longer supported by ATI/AMD's recent drivers so you have to use older versions. It depends on your operating system as to which one. For Windows 98 use Catalyst 6.2. For Windows XP use 6.11 or older. I think for XP try 6.7 first.
 

Read other 10 answers
RELEVANCY SCORE 48

Hi everyone,
we have the following problem: We have around 150 (identical) virtual machines running Win 7 in a Win2012 R2 Domain.
We also have a printserver (again running Win2012 R2 as all the servers) for a couple of Lexmark printers.
We use a GPO to map all the printers for each user. Normally all of this works fine, but in some instances, the automatic driver installation for the printer fails. In this case I get tons of Event ID 215 (Errorcode 0x0, HResult 0x80070002) errors
in the PrintServer eventlog whenever one tries to access a printer. I can't be a problem with the driver itself since it works fine on most machines and if I recompose the VM (its a VMWare View environment) I have about a 65% chance of the issue
not appearing with the new VM (the userprofile is kept).
Some things I found out so far:
- On the affected machines, pnputil lists the driver twice, once as oem20.inf, once as oem21.inf (both have the same driver version), pnputil -d is only able to deinstall the first one, I get an error message if I try to uninstall the second
one.
setupapi.app.log throws some erros "Error 2: The system cannot find the file specified". These appear correct, the FileRepository-subfolder doe not contain all the files it should on the affected machines. If I copy the files from a working computer,
the installation finishes and all is well. 
setupapi.dev.log contains these errors:
"Driver package 'lmud... Read more

A:Problem with automatic printer driver installation

Hello,
we did some further tests and changes and now we've got a solultion.
First of all we removed all lexmark universal drivers that were installed on the Parent VM (pnputil -d xxx).
The problem that the DriverFiles were not proper copied to the "FileRepository" folder, we've excluded the directory "C:\Windows\System32\DriverStore\FileRepository" from AV scanning. Now everything is fine.
To fix all the user profiles and machines that already have the broken files, we deleted the

"HKCU\Printers\Connections" path in the registry before recomposing the virtual maschine.
After the userlogon no printers are visible until you run "gpupdate /force". So we also deleted the 

"HKCU\Software\Microsoft\Windows\CurrentVersion\Group Policy" path from registry before recomposing the VM to get the printers directly after the recompose.


Thanks for your help! :-)

Read other 5 answers
RELEVANCY SCORE 48

hi
I recently bought a new Geforce 9600GT. i have a asus P5RD1-VM motherboard, which has a ATI express onboard graphics card. so i uninstalled the ati drivers, went to the BIOS and looked to disable to the onboard graphics card. i couldnt find an option to altogether disable it, but i found an option to set PCI as priority, so i did that. then i connected the gfx card.
now when i run my pc, it starts properly, shows the name of the card at the startup and everything. but when i try installing drivers for the card, it gives an error saying the driver could not find any compatible hardware. i tried different version drivers, but still the same problem.
i also tried a modified nv4_disp.inf file, and the have disk method, but that isnt working either. i tried cleaning old drivers using driver sweep, but it is not helping.
in the device manager, there is a yellow exclamation mark against PCI to PCI express bridge.
the same problem with both xp as well as vista (dual boot).
is it a problem with the motherboard? will changing it work? i think the card is okay bcos the system does recognise it at startup.
please help me out with this...
thank you!
 

A:Geforce 9600 GT driver installation problem

Read other 6 answers
RELEVANCY SCORE 48

Hello, I was recently updating my drivers for my x51 from alienware, and after installation it said I needed reboot, so I did, and it shows a black screen saying:

Intel UNDI, PXE2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation

This Product is covered by one or more of the following patents:
US5,307,459, US5,434,872, US732,094, US6,570,884, US6,115,776 and
US6,327,625

Realtek PCIe GBE Family Controller Series v2.41 (06/08/11)

Client MAC ADDR: xx xx xx xx xx xx GUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

PXE-MOF: Exiting PCE ROM.

Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key_



I'm not going to give my Mac Address our nor my Guid, whatever that is. I have an alienware, I can't open my hardware, and f2 and f12 doesnt work in boot to open my bios editor. I've tried using an hp, corsair, and dell keyboard, neither of them works. Someone tell me how to "Insert Boot Media in selected Boot device and press a key"?

A:Driver Installation Alienware Bios Problem

Why were you changing the drivers on a driver-complete OS? Did you think it's like XP? It's not. Nor should a BIOS be updated due to risk unless there is an applicable reason to do so listed, and a rescue method ready to go.

If you cannot get the F-key to work to access the BIOS to check the SATA controller and Boot order settings which likely changed, then reset the CMOS to see if that helps access the BIOS: How To Clear CMOS (Reset BIOS) [Easy, 10 to 15 Min]

Read other 4 answers
RELEVANCY SCORE 48

After formatting my PC for some reason my wifi usb adapter TP-Link TL-WN321G stopped working. After 5 days trying to fix it I decided to post here to get some tips.
So far I tried reformatting my PC, uninstalling all usb ports and reinstalling them and even installing new ones! (yeah i but a 10-1 double usb port card) the problem persists.
All the info i have so far are:
-TP-Link TL-WN321G, TL-WN422G, my Toshiba external Hard drive and my Samsung phone are all Unknown Devices.
-When I try to manually install the drivers I get the "the folder you specified doesn't contain a compatible software driver for your device" error.
-My mouse is not working corectly when connected to these ports.

My PC specs are
CPU Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz
Motherboard ASUSTeK Computer INC. P5N-E SLI
(bios Phoenix - AwardBIOS v6.00PG)
2GB RAM
GPU NVIDIA GeForce 9600 GS
OS Microsoft Windows 7 Ultimate 32-bit
BTW my device manager is like this at the moment:
Please help me?
 

A:Unknown Device problem during driver installation

Read other 16 answers
RELEVANCY SCORE 48

I have tried repeatedly to install the Intel Serial 10 driver from the updates center of the hp support assistant and it goes all the way through the installation process and then says it fails. Has anyone had this happen to them?

Read other answers
RELEVANCY SCORE 48

I have a Vista Business 32bit OS and am hving trouble solving the famous 'no-sound' mystery.
I tried the simplest way of solving it:

1. Downloaded the Realtek AC'97 driver (as guided by some other forum: No sound with Windows Vista)

2. Tried installing by running up 'setup.exe'.

3. All was well till Vista came up with this message:
'Windows can't verify the publisher of this driver software' and had two options:-
-> Don't install this driver software
-> install this driver anyway

I tried using the 2nd option - nothing happened and the same message popped up.
The 1st option obviously quit the installation process.

What do I do? Can anyone please help me on this?? It is frustrating to have a computer without sound and nothing to be done about it..

Thanks!

A:Driver installation problem in Vista HELP NEEDED

Do you have a Realtek sound card installed?
If Yes, have a look here:

Latest Realtek HD Audio Driver Version

Read other 1 answers
RELEVANCY SCORE 48

Hi there. Thanks for reading. I recently got an NVidia GeForce 9800 graphics card; http://www.amazon.co.uk/GeForce-Gra...3?ie=UTF8&s=electronics&qid=1281052860&sr=8-3 However, when I try to install the drivers, I get the error message; "The NVidia Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit" I've tried installing the drivers from the CD provided, and from various websites (including the NVidia one), and each gives me the same error. When I put the card in my computer, the monitor's LED remains yellow. When I take out the monitor cable and plug it into the motherboard, I see the "New hardware detected" notification on the desktop. However, this notification tells me that no drivers were found, and that it may not function properly. Which it doesn't. On the Device Manager, the graphics card appears as an unknown piece of hardware, with a yellow question-mark on the icon. My system specs are; Windows XP Professional, 32-bit, SP3. Pentium Duel-Core CPU, E5300 @ 2.60GHz. 3.25GB of RAM. I'm currently using a Radeon 4600 HD graphics card, but it's started to die rapidly and I need to make my new one work fairly urgently. If there's any important information that I've missed, or anything that could be useful, please ask and I'll get right on it. Aside from that, thank you very much in advance. Any help is greatly appreciated.
 

A:Help Please: Driver Installation problem with GeForce 9800.

Read other 16 answers