Over 1 million tech questions and answers.

Yoga 910 Signature Edition firmware bios update

Q: Yoga 910 Signature Edition firmware bios update

Purchased a Lenovo Yoga 910 Signature Edition from the Microsoft Store 3 months ago.Lenovo Yoga 910-13IKB 80VF Signature Edition I do not see it on the Lenovo Spectre/Meltdown bios update list. Is there an ETA for a bios update for the Yoga 910 Signature Edition to add new Intel CPU firmeware to address the spectre issue? Thanks very much.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Yoga 910 Signature Edition firmware bios update

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 81.6

Hello,     I was recently prompted to install the following updates but I am unsure as to what they mean and if it is absolutely necessary/recommended to install them. Any help is appreciated. Thank you.  Edit: My BIOS update also asked me to choose from two options: Update BIOS or Update Model number.  I have updated neither as I am unsure what it means and why I see that message. Can someone please tell me what it means? Thank you.  


























lenovo thinkpad BIOS update.png ?58 KB

Read other answers
RELEVANCY SCORE 80

My X1 Yoga touch screen stopped working after BIOS(V1.40), Touch firmware(V4.20) update. My Win 10 is still at ver 1803.I downgraded BIOS. But that doesn't help. Can't find a way to downgrade touch [email protected], any solution? Obviously, I am not the only victim. It is ridiculous that your recommended update will cause such trouble.In other thread, someone mentioned to replace screen. Really? The new update caused hardware damage?

Read other answers
RELEVANCY SCORE 80

Lenovo automatically installed a BIOS (1.39) and firmware update in November.  Lenovo Vantage says these updates were completed successfully. The touchscreen and pen stopped worked after that.  Windows doesn't recognize the pen or touch input anymore.  Firmware tool says "device not found".   Latest BIOS update (1.40) and Windows update in December didn't help. 

Read other answers
RELEVANCY SCORE 76.8

Hi! I have Yoga 710 Signature Edition, i5-7200U, 4GB Ram, 128GB SSD. Can I upgrade RAM from 4GB to 8gb or 16gb?

A:Yoga 710 14 Signature Edition RAM upgrade

http://psref.lenovo.com/syspool/Sys/PDF/Lenovo%20Tablets%20_%20Convertibles/YOGA%20710%20(14_)/Yoga_...8GB max, DDR4 2133, one 260-pin SODIMM socket You would have to swap out 4GB, add 8GB. 

Read other 1 answers
RELEVANCY SCORE 75.2

Both USB Type A 3.0  ports as well as the USB 2.0 portion of the DC-in port are non-functional. I have tried thumb drives, wireless mouse receivers and even a portable cd-drive.....no luck on any front. I have ran windows updates, the intel driver & support assistant as well as the lenovo solution center; all of which claim all drivers/bios version/system version are up to date. Has anyone experienced any success tackling a similar issue? 

Read other answers
RELEVANCY SCORE 75.2

Hi, I enabled the conservation mode in Lenovo Companion settings but my battery still charges to 100 %?

Read other answers
RELEVANCY SCORE 74.4

Hi,

Does anyone know how I can get an ethernet connection my laptop. Or is that not possible if I don't have an ethernet port on my laptop. I wasn't sure.
Thanks!
 

A:Lenovo (Yoga 710-15ISK Signature Edition) No Ethernet Port!

That flip-open type laptop appears to have 2 USB 3.0 ports.

A "USB 3.0 To Gigabit Ethernet" adapter should work for you.
https://www.walmart.com/c/kp/usb-ethernet-adapter

---------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 74.4

Hello, I've had my Yoga 900-13ISK2 Signature Edition for a little less than 2 years and up until recently it has been working flawlessly.  After the recent windows 10 1803 update, I started seeing the "phantom touches" or "ghost touches" phenomena on my screen.  It is not very frequent, but it does happen from time to time.  I am not sure if anything triggers the behavior as it normally happens randomly and not related to any particular task.   This is very annoying and disruptive especially because I use this machine for work.  I checked to make sure all my drivers were up-to-date and they all are.  I checked the forum and there were no solutions for my PC there either.  I used the recovery function to do a clean install of windows, thinking that maybe the 1803 patch caused this issue and that seemed to work fine for a while but the phenomena came back.  By the way, the signature edition doesn't come with the factory image partition (major error on Lenovo's part - that should be standard on all devices, no matter what the edition) and now the Novo/Nova (sp?) button doesn't work and the Airplane Mode hot key doesn't work.  For such a premium laptop, it is definitely lacking in areas that are easy to provide to make the customer experience positive. I still have this issue and want to know if anyone else is seeing this problem.  I also tried stopping the HID touchscreen controller and re-starting to see if that h... Read more

Read other answers
RELEVANCY SCORE 72

So whenever I play games (specifically grand theft auto five) I will boot it up and then within minutes it will begin to lose frames, but only for breif yet increasing stretches of time. My frames will drop to like 15-20, there will be the sound of static (as in the alteration of in game noise), input lag will occur (sometimes with times between 5-10 seconds of delay between when I push a button and when my character moves), and then after like a minute it will snap right back out of it, but do it again in just a little bit. CPU: Intel i700-7700HQ CPURAM: 16 GBGPU: Nvidia GeForce GTX 1050 I have some pretty good computer stats, so I really see no reason why the game should be doing this. Possible Causes Inability to update Intel Driver (this seems intentional on lenovo's part)The fans. Whenever my CPU Temp goes down, the game starts to lag, which seems strange to me, becuase I can hear the fan switching to low mode whenever it starts to lag. (yes this is right, I know it sounds weird)Something about my Hard Drive not being actually used during the game (its only drawing assets, not actually computing anything, so it enters a sleep mode and hampers my performance)Something about cloud storage eating up comptational power Things I've done to try to fix it  I set it on full performance when plugged inI turned off indexingI turned settings way downI tried to update the drivers (It wont let me do intel)I've made sure I'm on NVIDIA as my primary g... Read more

Read other answers
RELEVANCY SCORE 67.6

Hi
I found there is an update for my SSD*. As my XPS13 sometimes hangs on thaw, I wander if this update could help. I read it fixes issues about power management, but nowhere I read it targets ubuntu.
Also, can I use the iso file to burn a usb stick instead of a CD?
Thank you
*www.dell.com/.../DriversDetails

A:XPS13 L322X developer edition (Ubuntu) SSD LMT256M3M firmware update question

Sorry, I posted a bad link above. My SSD is a LMT-256M6M with firmware DM8110C and there is a DM8110F, A05 available here : www.dell.com/.../DriversDetails

Read other 1 answers
RELEVANCY SCORE 66.4

Hi, Samsung tells me the SSD (a Samsung) firmware updates will come from Lenovo, but I didn't see them on the driver page. The model is MZMTE256HMHP-000L1 Any suggestions? Thanks,Bruce 

Read other answers
RELEVANCY SCORE 66

I have ThinkPad Yoga X1 (Gen1) with Thinkpad OneLink+ dock.If something (anything, USB memory stick, USB keyboard, USB monitor) is connected to a dock or to a notebook, during powering on, it want pass the BIOS part and start booting Windows OS.It should be fixed long time ago, but same issue still persists.I have latest BIOS firmware - 1.31https://pcsupport.lenovo.com/hr/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-...The issue persis for a months

Read other answers
RELEVANCY SCORE 66

Lenovo Vantage updated the T480s BIOS on 8/9. I immediately started getting a Thunderbolt error when starting Windows 10 64, which says to update the Thunderbolt firmware. I downloaded the current firmware from Lenovo (n22th06w) but I get the following error when trying to update: 0x20D SDK_INVALID_OPERATION_IN_SAFE_MODE What's the solution, Lenovo? Thanks.  

Read other answers
RELEVANCY SCORE 65.6

This laptop has "succesfully" installed firmware update 1.19 about 30 times now. Everytime windows updates, it "installs" this as well. What gives?

Read other answers
RELEVANCY SCORE 65.2

Hi there, my Helix laptop (purchased a few years ago) is giving me the "Keyboard Dock Fan Error" at startup. I am then unable to use the keyboard and mouse pad. I previously had this same error a couple of years ago and had solved it using the Firmware update.Now I tried:- BIOS update. Done updated to the latest BIOS version.- Tried doing again the firmware update (although I had done it a couple of years ago) but now I have Windows 10 and the firmware update executable on the Lenovo site says it is for Windows 8 or below. I tried it anyway but it gave an error saying: "This tool and EC firmware mismatch, or communication error is happened.".  Your help is much appreciated.- Najib

Read other answers
RELEVANCY SCORE 65.2

Hello. Back story, our company has purchased and now rolled out our Lenovo X1 Yoga laptops (model 20FQ).  During the rollout, we installed all of the drivers from lenovo's site via the MDT driver package and then deployed the latest System Inteface Foundation so we could install teh Lenovo Settings app later down the road via the Windows 10 App store.   We have not installed the lenovo settings or lenovo companion apps from the store but are now receiving reports of users getting a message from "Lenovo Companion" that an update is available.  The update that is available is an Intel ME firmware update.  Is there a way to disable or prevent these updates from pushing to users via registry or configuration file? Does the System Interface Foundations app contain the Lenovo Companion app or the update features?   Screenshot of update message attached.  We do have the ADMX templates for Lenovo Companion and Settings in our AD/GPO; would disabling updates in the GPO for Companion prevent these from running even though we don't really have the actual Companion app installed?Thanks!Further details:Win10 x64 Enterprise Edition 1607 build w/all latest patches/updates. 


























lenovo companion update message.png ?19 KB

A:X1 Yoga and Intel ME Firmware update being pushed but how?

Lenovo System Interface Foundation (LSIF) is doing this.  The only purpose of this app is to support Lenovo Settings and Lenovo Companion, so if you don't install these apps, there is no point to install LSIF.  One of the features of LSIF is to automatically install "critical" updates for Lenovo software and drivers, such as this recent Intel ME Firware update.
 
The Deployment Guide for Lenovo Settings and/or Companion explains this feature and how to disable it:  https://support.lenovo.com/us/en/solutions/hf003321
 
I have copied-and-pasted the relevent section below:
 
Chapter 4. Considerations for Deployment
 
Lenovo System Interface Foundation contains some features which may not be appropriate for enterprise customers.  Please read this section carefully to understand these features and consider whether they should be disabled in your specific environment. 
 
1.  Automatic Updates ? Lenovo System Interface Foundation updates itself automatically whenever a new version is posted to the Lenovo website. Some IT organizations will want to disable this.  The automatic update can be disabled by registry.  To do so, copy-and-paste the below text into a .reg file and then import it into your registry:
 
Windows Registry Editor Version 5.00
 
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Lenovo\ImController]
"DisableAutoupdate"="1"
 
Or use ?lsif-disable-autoupdate.reg? that is provided in the .zip fil... Read more

Read other 1 answers
RELEVANCY SCORE 65.2

Hello. Back story, our company has purchased and now rolled out our Lenovo X1 Yoga laptops (model 20FQ).  During the rollout, we installed all of the drivers from lenovo's site via the MDT driver package and then deployed the latest System Inteface Foundation so we could install teh Lenovo Settings app later down the road via the Windows 10 App store.   We have not installed the lenovo settings or lenovo companion apps from the store but are now receiving reports of users getting a message from "Lenovo Companion" that an update is available.  The update that is available is an Intel ME firmware update.  Is there a way to disable or prevent these updates from pushing to users via registry or configuration file? Does the System Interface Foundations app contain the Lenovo Companion app or the update features?   Screenshot of update message attached.  We do have the ADMX templates for Lenovo Companion and Settings in our AD/GPO; would disabling updates in the GPO for Companion prevent these from running even though we don't really have the actual Companion app installed?Thanks!Further details:Win10 x64 Enterprise Edition 1607 build w/all latest patches/updates. 


























lenovo companion update message.png ?19 KB

Read other answers
RELEVANCY SCORE 64.4

When will the Intel Management Engine Firmware 11.8 update be available for the Yoga 910?I do not see it listed on this web page:https://support.lenovo.com/au/en/product_security/len-17297only the 920It is vulnerable according to the tool available on this page:https://downloadcenter.intel.com/download/27150

A:When will the Intel Management Engine Firmware update be available for the Yoga 910?

I see a lot of people asking this question, and the best answer I have seen so fare is that they are working on certifying Intel's firmware update on all vulnerable Lenovo systems as fast as they can, and will release the firmware updates as soon as possible.  

Read other 1 answers
RELEVANCY SCORE 64.4

This is a heads up message as I was able to recover my system by doing a grub2-install booting from a recovery USB. I must say I had used `fwupdmgr update` before to update my Thinkpad's firmware and it worked flawlessly. However, this last update left my boot pointing at the wiped out Windows boot in UEFI, which rendered my boot broken. If anyone from Lenovo is listening, please try to avoid breaking Linux user's systems . It is more disapointing when this happens using a Linux only toolchain (Btw, kudos for the support of lvfs!) This is my `fwupdmgr get-history` output in case it provides some useful info: 20LDCTO1WW System FirmwareDeviceId: d3db6c5633d83a940028fc88d8102d1f1563e3a4Guid: fc5552dc-7882-409b-9b98-699361c74fc4Plugin: uefiFlags: internal|updatable|require-ac|supported|needs-rebootChecksum: SHA1(804154ccc003a77e9b0d88fcb2d52cf12050e434)Version: 0.1.29Created: 2019-06-06UpdateState: success[Release]RemoteId: lvfsVersion: 0.1.34Checksum: SHA1(269cea4389dd420e58b88f182eabeaab23d74e85)Flags: noneBootMgrDesc: legacyCompileVersion(com.redhat.fwupdate): 12DistroVersion: 20190607CompileVersion(org.freedesktop.fwupd): 1.2.8SecureBoot: EnabledCompileVersion(com.redhat.efivar): 37UEFIUXCapsule: EnabledESPMountPoint: /boot/efiCompileVersion(org.freedesktop.gusb): 0.3.0RuntimeVersion(com.dell.libsmbios): 2.4DistroId: opensuse-tumbleweedCpuArchitecture: x86_64BootTime: 1559848020RuntimeVersion(org.freedesktop.appstream-glib): 0.7.14RuntimeVersion(com.redha... Read more

Read other answers
RELEVANCY SCORE 64.4

Hi everyone,after a recent firmware update the keyboard's backlight stopped working,to be fair it works during the boot of the laptop,but when win10 is up and running switch off.Can anyonbody help?thank youFrancesco

Read other answers
RELEVANCY SCORE 64.4

Hi All!Using the Lenovo System Update tool, I've updated the bios. It said everything went succesful.However under Device manager, there is an error for the System Firmware:"This device cannot start. (Code 10)Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of."I've tried "Update Driver" but everytime with this same result.I've also tried "Uninstall Device". But then it goes back to a driver from 2006 (indeed the error is gone) and when I update the driver, the error is back. Also, after the update (during booting the computer, it says it was successful), the update is still listed under the System Update Tool, indicating it actually didn't install (see below). However, just trying it again, doesn't result in a different result. Does anyone have a suggestion what could be going on?(I think the bios update, which just a few days back became available, is related to certain security problems that Intel was having...)

Read other answers
RELEVANCY SCORE 64.4

Hi all, Yesterday when I turned on the computer and logged in into windows, a warning-window poped-up asking for recomended "Firmware Update" by Lenovo. I ve proceeded with the update. After an intall-restart I wasn't able to log in with my fingerprint anymore. After a small investigation I've realized that are now three devices with problems (Code 31) in my device manager.The devices are:Biometric Devices - Synaptics WBDI - SGXSensors - HID Sensor Collection V2System Devices - System Interface Foundation V2 DeviceSo, besides the FingerPrint, I'm not able to use the Auto-Rotate (when turning the lid into tablet or tent mode) feature and the Lenovo Vantage Software since it asks me to update the System Interface Foundation Driver. What I have tried so far:Reinstall (since I can't rollback) the Firmware Driver: "Type C Firmware for Windows 10 (64-bit) - Yoga 920-13IKB, Yoga 920-13IKB Glass 1.3" (since there isn't a lower version to roll back)Reinstall all drivers from Lenovo web-page (FingerPrint, System Interface Foundation, Chipset, Display, Audio, etc)And finally, Reinstall the operating system Windows 10 64 using system restore I've not clue what to do next and I'm really avoiding opening an RMA. Please help me. Thank you.


























errors.png ?225 KB

Read other answers
RELEVANCY SCORE 64.4

Hi All!Using the Lenovo System Update tool, I've updated the bios. It said everything went succesful.However under Device manager, there is an error for the System Firmware:"This device cannot start. (Code 10)Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of."I've tried "Update Driver" but everytime with this same result.I've also tried "Uninstall Device". But then it goes back to a driver from 2006 (indeed the error is gone) and when I update the driver, the error is back. I've also downloaded the bios update file, and if I run it again it says I'm trying to install the same version that is already installed, so there is no need. So this indicates is did install. However, the error message under Device manager is there... Does anyone have a suggestion what could be going on?(I think the bios update, which just a few days back became available, is related to certain security problems that Intel was having...)

Read other answers
RELEVANCY SCORE 64.4

Have been trying to install the new Touch Firmware Update via Lenovo Companion for more than a week but it fails each time I try. Help?  


























lsu.png ?30 KB

Read other answers
RELEVANCY SCORE 64.4

My X1 Yoga has a SAMSUNG MZVPV256 SSD Tried to install the NVMe firmware update from here: http://support.lenovo.com/gb/en/products/Laptops-and-netbooks/ThinkPad-X-Series-laptops/ThinkPad-X1-... It boots Linux however at some point it can't find the folder.When Windows started again, it ran FWLINBRDG automatically. This one shows the following error: 

Read other answers
RELEVANCY SCORE 63.6

When will the Intel Management Engine Firmware update be available for the Yoga 710-14ISK?I do not see it listed on this web page:https://support.lenovo.com/au/en/product_security/len-17297 It is vulnerable according to the tool available on this page:https://downloadcenter.intel.com/download/27150 (text from delurker post for Yoga 910 - adapted for Yoga 710)

Read other answers
RELEVANCY SCORE 63.6

have anyone seen the 16.0.0.2-R0STF14W 2018/08/07 updater fail to update the Thunderbolt firmware? i tried both manually download the packagehttps://pcsupport.lenovo.com/ec/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-X-SERIES-LAPTOPS/THINKPAD-...orvia Vantage, both got no error message, but the firmware wasn't updated.completly running Detect2016.exe said the build ID is still R0STF13W, release note said it should have go to R0STF14WNVM image is 14 though. Vantage wil detect machine has old version and want to do it again.  I let it do it three times, same things. Thunderbolt Driver has been updated to 17.3.74.8 (package version 17.3.74.400) before firmware update 

Read other answers
RELEVANCY SCORE 63.6

I did some updates on my Yoga and now my touchscreen no longer works. I have gone to the device manager and updated and checked on it. No luck. My pen works, but the finger touch does not. Nothing else seems to have happened to my computer past the updates. It seems like others seem to have this problem since updating their computers. My computer is no longer under warranty, and since I bought this thing for its touchscreen, I am a little choked that it has gone kaput. Would it have been the update that caused it, or would it have been just a case of it went kaputsky at the same time and it is a mere coincidence? Either way, I am really upset that this machine is broken so soon. Any idea if there is going to be an update to fix this or if it is now just blown?

Read other answers
RELEVANCY SCORE 63.6

 The title literally.I am under stress from a recent failure to update.This will stop with an error of 85%.I am using X1 yoga 2nd gen (20JD) with Thunderbolt3 dock(by Lenovo ThinkPad), and the BIOS version installed on my laptop is N1NET42W 1.29PLZ. Help me

Read other answers
RELEVANCY SCORE 63.6

Get a messagebox saying "battery not detected" and it's not charging from mains. So laptop has now turned into a desktop... as needs plugging in continually... making it almost useless for purpose. This happened exactly after firmware update a few weeks ago. By coincidence the management software also kindly informed me that it could manage the battery better and stop it wearing out by only charging up to 90% - fair enough, but don't treat me like a muppet and disable it without any way to get it back. Tons of Windows 10 updates today (after not being able to use it for a few weeks) but still no battery. I tried F1 BIOS but nothing there to enable the battery (only to disable it). This is frankly a joke - timing shows it's due to the firmware update because the battery was fine and lasted a couple of hours right before. In 25 years of countless laptops, have never had this problem - batteries weaken gradually but don't suddenly lock up and require a paid replacement suddenly. How do we run down our original battery properly before polluting the planet? Phil

Read other answers
RELEVANCY SCORE 63.6

Hello everyone, Lenovo System Update keep asking me to install version 10.0.56.3002 of Intel Management Engine Firmware on my ThinkPad Yoga 12 (Type 20DK) running Windows 10 Pro x64. Once I install the update, a cmd window pops up for a fraction of a second, then my PC restarts. However, the installation seems to fail as System Update keeps asking me to install the update again after the reboot. I understand that this update is security critical and therefore want to resolve the installation error. I've done a little debugging by running MEInfoWin.exe and FWUpdLcl64.exe in C:\DRIVERS\WIN\ME:The update seems to fail indeed, as MEInfoWin.exe still reports my FW Version as 10.0.55.3000.When I try to manually run the upgrade, I get an error:C:\DRIVERS\WIN\ME>FWUpdLcl64.exe -f ME10.0_5M_Production.binIntel (R) Firmware Update Utility Version: 10.0.56.3002Copyright (C) 2007 - 2017, Intel Corporation. All rights reserved.Communication Mode: MEIChecking firmware parameters...Warning: Do not exit the process or power off the machine before the firmware update process ends.Error 8746: Firmware update not initiated due to invalid image lengthLooking at the installer for the previous Intel ME Update (Version 10.0.55.3000), which runs successfully, I saw that the Yoga 12 apparently uses a 1.5M image.The current installer is missing the 1.5M image and contains only a 5M image, which results in the abovementi... Read more

Read other answers
RELEVANCY SCORE 63.6

After performing the May 15, 2018 update, my touchscreen no longer works.  The Wavcom device in device manager is hidden and shows "Currently, this hardware device is not connected to the computer. (Code 45)"  I have done extensive searches in this site and in google and have not been able to find a solution.  It was working fine before the update.  













Solved!

Go to Solution.

A:Thinkpad Yoga X1 touchscreen not working after Touch Firmware Update

Update: after a few days my touchscreen suddenly started working again. Not sure what happened but happy to have it back.

Read other 5 answers
RELEVANCY SCORE 63.6

After installing the latest firmware update (V.4.20/5.04/100.3) touch screen is dead. I looked at the device manager and no indication of error anywhere. Can't find device that would require an update - nothing like 'other device', nor under Human Interface Devices.  Noted that during the update it reported several times 'pen not found'.  How to enable touch screen again that worked perfectly fine until this update was installed?

Read other answers
RELEVANCY SCORE 63.6

After performing the May 15, 2018 update, my touchscreen no longer works.  The Wavcom device in device manager is hidden and shows "Currently, this hardware device is not connected to the computer. (Code 45)"  I have done extensive searches in this site and in google and have been able to find a solution.  It was working fine before the update.  

Read other answers
RELEVANCY SCORE 63.2

I am trying to update the BIOS (r06uj47w) on a Lenovo T460 (20FMS26R00). Am using the latest ThinInstaller ([Thin Installer build: 2016-07-05 Version: 1.2.0018]). When ThinInstaller processed the BIOS update package, it rejects the package because the CRC error for the package is wrong. I've manually applied the package successfully. Question for the Lenovo techicians, can you confirm this behaviour? And can this be corrected in the software catalog? Also can you possibly tell how the what kind of CRC ThinInstaller is calculating, so I can possibly generate it myself? Thanks in advance, Relevant output from thininstaller logs: Severe  2017-03-01 , 01:57:04              at Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()              Message: Package Signature Verification Failed, ID:r06uj47w Info       2017-03-01 , 01:57:04              at Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()              Message: Update Thinkpad BIOS Update - 7 [32,64]/8.1/10 [64] installation failed

Read other answers
RELEVANCY SCORE 63.2

Hi,I am having this error message on my hp dc7800.2210 - parameters frame errorme bios extension module execution has haltedupdate bios or management engine firmware if problem persists.2206 - end of post heci failuresystem halted. power cycle the system to reboot. now how can i update bios from usb

Read other answers
RELEVANCY SCORE 63.2

Hello Today y made a BIOS Update in windows 7 (64) from 3.06 to 3.90.The Update Process freeze at end  and only Power Cycle possible (Waited 15min.) Now when power Up only noise from Fan and Black Screen.CD rom blink  (like he search somthing) Called HP Support... and what Surprise... Support ended 1 month before... I asked for Help in Bios Crisis Recovery procedure...And the nice woman told me that only can buy a New Motherboard. Can anybody Help Me Please ? Is there really no recovery procedure ? Please ? 

A:Z820 Bricked Bios after Firmware update

Hi: If you run the BIOS file again (on another PC), the intruction page opens and you can try this...I'd burn the DOS based flash files on a CD, since the DVD drive may be looking for a CD to recover from, but according to the instructions below, you can use a USB flash drive (formatted in the FTA 32 files system, not NTFS). Just put the files inside the folder on the CD, not the folder. Fail-safe BootBlock Recovery ModeHP Workstations include 64 KB of write-protected boot block ROM that provides a way to recover from a failed update of the system BIOS ROM, for instance in the event of a power loss.  Fail-safe BootBlock Recovery Mode will detect that the BIOS is unusable and boot the workstation in a recovery mode and search the root folder of any FAT/FAT32 file system on any USB media source (hard drive, flash drive, etc.) for a compatible binary image. The binary (.bin) file in the DOS Flash folder should be copied to the root of the desired storage device, and the system powered on. Once the binary image is located, the BIOS recovery process will be attempted. The automatic recovery will continue until the BIOS is successfully updated or restored.    

Read other 1 answers
RELEVANCY SCORE 63.2

Hi,I am having this error message on my hp dc7800.2210 - parameters frame errorme bios extension module execution has haltedupdate bios or management engine firmware if problem persists.2206 - end of post heci failuresystem halted. power cycle the system to reboot. now how can i update bios from usb

Read other answers
RELEVANCY SCORE 62.8

Hi, I'm currently facing the issue that the Intel Management Engine 11.8 Firmeware Update (11.8.60.3561) suggested by Lenovo Vantage as Important update never finishes - it alway terminate in the end with the following error in the error log:Error 8707: Firmware update failed due to an internal error Does anyone has ideas how to solve this? Regardspgat 

Read other answers
RELEVANCY SCORE 62.8

The linux version of the latest BIOS/ECP firmware (1.44/1.18) for the X1 Carbon 4th gen (type 20FB and 20FC) and X1 Yoga 1st gen (types 20FQ, 20FR) was released Aug 2 (n1ful37w.zip) https://pcsupport.lenovo.com/de/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-... Direct link: https://download.lenovo.com/pccbbs/mobiles/n1ful37w.zip That .zip file contains two .cab files, N1FET70W.cab and N1FHT35W.cab, for the BIOS and ECP respectively. Updating the BIOS in linux for my X1 Carbon 20FB worked fine for me with fwupdmgr, but failed for the ECP. This was because the metadata for the ECP update has a typo. Inside the N1FHT35W.cab file is a firmware.metainfo.xml, with a GUID of: 4c2e5b5c-6467-43af-afeb7bc72d96b9c3 This is incorrect. It's missing a dash, and should read: 4c2e5b5c-6467-43af-afeb-7bc72d96b9c3 Modifying this file within the .cab (or extracting it and generating a new .cab) and then flashing that with fwupdmgr fixed the problem. I've attached the modified .cab file (nested in a .zip file for upload). You can check yourself that the only thing that's changed is the GUID line in the .xml file. This typo should be fixed in the source by Lenovo and reuploaded as perhaps a rev 2 for n1ful37w.zip . Hopefully this hasn't happened for any other firmware update files.

Read other answers
RELEVANCY SCORE 62.8

I'm a new owner of a Flex 4-1570 Ideapad. I have a critical update awaiting install, however the window popup says it is for the YOGA not the Flex. Thus, I have not installed it. My question is, should I install it? If not, how do I turn the notification off? Thanks! 

Read other answers
RELEVANCY SCORE 62.4

I have a ProBook 450 G3 running Windows 10. I am planning on updating the BIOS to N78 Ver. 01.15 Rev.A (from Ver. 01.12). I noticed the following statement on the BIOS download page: "HP strongly recommends updating the Management Engine firmware to version 11.0.18.1002 to prevent BIOS/Management Engine firmware corruption issues.". How can I determine the version of the IME firmware on my system? The latest version of the IME firmware for download is 11.0.0.1202 ... should I just go ahead and download and install that before the BIOS update? Thanks in advance,Mike

A:BIOS Update / Intel Management Engine Firmware

Hello, Thank you for posting in the HP Support forum. To answer your question about Intel ME... Perhaps in the Control Panel > Programs and features. When you find it there click on it and it should show a versionorif you search for it in C:\Program files or C:\Program files (x86) and search inside the folder, it should show the version somewhere. You may also see if this tool will work on W10 > https://downloadcenter.intel.com/download/19009     But considering you already have experience with BIOS things , I am wondering why do you want to do it again... General recommendation I provide to users/customers is NOT to upgrade BIOS/UEFI unless they experience any kind of specific BIOS/UEFI issue. Updating just for the "noble cause" of updaing and just for using the latest verson is not solution. Any kind of update (no matter for what and who relesed it) can fix 2 issues but may introduce 10 more issues. Additionally, upgrading the BIOS (for any vendor) poses more risks because BIOS recovery is not that easy as compared to typical software updates IF something goes wrong. Same applies for Windows Updates, OS update, drivers updates, etc - upgrade/update IF you have issues which you know are fixed in the newer version or for some severe security issues. Otherwise, keep the existing version as long as possible.

Read other 1 answers
RELEVANCY SCORE 62.4

Hi all,
I'm more curious than anything, for the device is running Windows 10 just fine, but do you have to first install Bios update A17 prior to A19? I couldn't get A19 to install. Thanks.

A:D630: Bios firmware update fails to install

It's more likely you're going to need to build a bootable flash drive with an earlier version of Windows to get the flash to work -- Windows 10 is not supported on this model, so it's very likely the flash installer won't run under 10 regardless of which version you're trying to flash.
Rufus is one easy way to make a bootable flash drive that will allow the flash to work.
https://rufus.akeo.ie/

Read other 2 answers