Over 1 million tech questions and answers.

Reinstalled windows 7 home premium 64 bit missing drivers.

Q: Reinstalled windows 7 home premium 64 bit missing drivers.

I had a bunch of viruses on my computer and I kept getting more because one of them hijacked mcafee, preventing me from turning it back on. I tried to restore my system to an earlier date but all the restore dates were too recent so I decided to reinstall windows 7. I didnt have the disk any more so I downloaded it to a usb drive. I succesfully installed it, but when I logged in I noticed it looked completely different. The bottom bar was much larger then it was before, The screen looks zoomed in and the shortcuts are all much bigger, and when I go into control panel or computer the windows take up the entire screen and cant be made smaller, only minimized. Could I have downloaded a wrong version of windows 7? I also failed to realize that I would need to install all new drivers and was very confused when I couldn't connect to the internet. I tried to install the drivers by looking them up with the network cards ven id but it says they aren't supported on my device. Any help will be greatly appreciated as I have no clue what I am doing. If it helps I have a dell xps 8300.

RELEVANCY SCORE 200
Preferred Solution: Reinstalled windows 7 home premium 64 bit missing drivers.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Reinstalled windows 7 home premium 64 bit missing drivers.

Hi Welcome to Seven Forums .... Looks like you need to start again and do a Clean Install ...

Follow the Tutorial below to get the perfect Insulation ..
It contains every thing you need including the ISO ...
Once you have done that and can connect to the net .. Run Windows Updates ..

Any Drivers that are missing after that ... Can be found in the Link below ....

Product Support | Dell US

Read other 3 answers
RELEVANCY SCORE 87.2

Hi,

I'm having a problem while trying to do a clean install of windows vista home premium. Every time I click install now when it comes up, I can this message "A required cd/ dvd drive device driver is missing, Plug in the cd, dvd... ect with the needed drivers now."

I have a clean never used western Digital Caviar black 1 tb SATA HDD, a gigabyte GA-EP35-DS3L Mobo, and a LG multi DVD rewriter, Model GSA H54L.

From my understanding its not the cd/dvd driver it reads the install cd just fine up until then, but the the SATA, Raid drivers or something else that aren't being detected. I've tried messing around with turning the AHCI on and off and switching from legacy to Native Ide ports. But nothing worked. The same thing was happening even when I had the HDD hooked up to a IDE/SATA converter and plugged into an IDE port.

and as far as I know the aren't any SATA Drivers offered for my motherboard at the gigabyte site. Any help would be greatly appreciated. I just wanna get this thing working

Thx

A:missing cd/dvd device drivers while trying to install windows home premium

From this page: http://www.gigabyte.us/Support/Mothe...ver=#anchor_os

Quote:




To enable hot plug capability for the SATA connectors controlled by the ICH9 South Bridge, you must install Windows Vista (on ICH9, hot plug is supported in Windows Vista only) and configure the SATA connectors for AHCI mode. (Refer to manual Chapter 2, "BIOS Setup," "Integrated Peripherals," for details on enabling AHCI.)

Read other 3 answers
RELEVANCY SCORE 87.2

Hey guys, my hardrive burnt up so I went to a computer repair shop to see if He could check it out, when we were 100% it was done for he had a blank laptop hard drive he could sell me with a burnt windows 7 disk or charge 75$ extra to install it for me. I of course took the blank HD with the installation disk and went home and started it, but when I started the installation I got to the part where it requires drivers but it didn't find any on the disk.

My question is, since I'm going to have to get drivers, can I use a flashdrive to install the drivers? And if so, do I have to format the flashdrive or anything so it will read the drivers?

A:Installing windows 7 home premium on blank HD, missing drivers.

  
Quote: Originally Posted by Techmans


Yes you can use your flash drive for provide drivers to the windows 7 setup. It does not need to format but you have to locate the driver files to Windows setup.
See more details about


Is there any chance that you know specifically which drivers I need to download, just so that I can get the hard drive going and be able to get online so that I can auto update the rest of the drivers?

The laptop itself is a...
Hp Pavilion g7 Notebook
Product number A7A44UA#ABA

I downloaded the graphics and audio drivers, along with the wifi one, but are there any that it absolutely has to have in order to work? I've read elsewhere about a chipset driver, but I cannot find it on the HP website.

Once I get it started i'll be using public wifi to get the rest of the drivers as well via auto update im assuming, or I can just download the rest as i see fit.

Read other 9 answers
RELEVANCY SCORE 87.2

Hi, - I used the process outlined in this link: http://www.winsupersite.com/showcase/winvista_upgrade_clean.asp
to make a clean install from Windows XP Home Media Edition to Windows Vista Home Premium. <<ACER 5100 notebook, 1G ram, 1.6Ghz, 110G HDD>> Until I found Paul Thurrott's web site, it looked like I was going to have to actually upgrade and bring along all that mess from 3 years of using XP. But, following the instructions Paul gave, I actually did get a clean install. The software was 10% off too from Circuit City. Too bad about them, huh ?

Well, the clean went well, but afterwards when I repeated the process inputting the product key, right near the end, maybe the 3rd or 4th restart, the ACER froze up. I did it again after first deleting the partition and recreating it (BootIt NG). 2nd time it installed fine. Took about 30 min for the clean install, and 1 hour 5 min for the upgrade. The only thing I did differently the 2nd time was to change the boot sequence back to HDD, CDROM.

Anyway, the PC is fine. Wireless works and I've done some Internet browsing. But, in device manager, I have 3 instances of PCI Flash mem alarm, and 1 instance of a USB2.0 camera alarm. Minor but Vista keeps reminding me to install drivers. I don't have the hardware, so I don't know why this has happened. Anyone know ? What to do at this point ?

Thanks !
RDL
 

A:Drivers Missing After Upgrade to Windows Vista Home Premium

Solved by getting two drivers from ACER's web site. It wasn't obvious which ones I needed by the description in Device Manager but after Googling found several folks who had the same thing happen to them and also found which drivers were needed.

RDL
 

Read other 1 answers
RELEVANCY SCORE 83.2

Windows 7 Ultimate, but Aero won't work and all drivers are up to date! Thanks for your help!

A:Reinstalled from Windows 7 Home Premium to...

Hi kcmartz,

Please complete your System Specs. You can look them up by searching "system" in the Start menu search field, and clicking System or System Information; also by typing "dxdiag" there and hitting Enter, then browsing the tabs for the information.

Also, PSU stands for Power Supply Unit.

Cheers,

Walker
Windows Outreach Team

Read other 9 answers
RELEVANCY SCORE 77.2

Hi, my Samsung Notebook 300E5A wouldn't boot, and no recovery options were working, and I hadn't made a recovery disk, so I reinstalled Windows 7 from a USB drive.

Now 4 drivers are missing:

Ethernet controller
Network controller
PCI Simple Communications controller
SM Bus Controller.

How do I go about acquiring or installing these?

Thanks for your help,

Andrew

A:Reinstalled windows missing 4 drivers

Hi Andrew Welcome to Seven Forums .. You need the Chipset and Lan Driver .. Install them then let me know what is missing .. They are in the Link below ...
NP300E5AH - DOWNLOADS | SUPPORT | SAMSUNG

Read other 9 answers
RELEVANCY SCORE 77.2

Had to reinstall Windows 7 on my Sony Vaio

System Model VPCEB36GMEthernet Controller MissingBase System Device MissingI managed to install all the drivers except these two. I thought I had the right drivers but I was mistaken. Would really appreciate someone just getting me the right links on the sony website please

Read other answers
RELEVANCY SCORE 77.2

Hi all

I have tried to find these myself on the interenet but it all seems to be trial or just so confusing I have no idea what I am doing. I am hoping someone can help.

I did a clean reinstall of windows xp prof SP2 and everything is ok but the drivers for the following things are missing.

AMD Athlon XP 2400+

Ethernet connection driver
Multi Audio Contoller driver and
SM bus controller.

I know the ethernet is important as I cannot connect to the internet on my pc anymore lol. Can someone please point me in the right direction

Thank you
 

A:reinstalled windows xp, now drivers missing

Read other 7 answers
RELEVANCY SCORE 77.2

I wiped out my computer and reinstalled windows 7 home premium 64-bit on my HP A7A75UA Laptop and
Now it's saying I'm missing the drivers for "HP NetServer 10/100TX PCI LAN Adapter" under the category "Network adapters" and under "other devices" It says I'm missing "Network Controller" and "PCI Device", I don't know exactly what the actual drivers I need to download are but also I cannot connect to the Internet on my laptop without those drivers and I've tried "update driver" but it doesn't work can anyone give me the links to where I can download the drivers please?

A:Reinstalled windows 7 now missing drivers

Hi Welcome to Seven Forums .. Drivers in the Link below ...
Software & driver downloads HP 2000-417NR Notebook PC | HP? Support

Read other 9 answers
RELEVANCY SCORE 77.2

My OS recently crashed (config corrupt or missing) and I was unable to fix it with the standard copy / repair instructions since the windows\repair\system file was missing. Recovery panel was of no help. And when I attempted to do an in-place installation, but it kept hanging when it got to the 35 minute mark. I deleted antivirus software and attempted again, to no avail. During the hanging, I was able to use f10 to get to a dos prompt, which allowed me to launch the files and settings transfer wizard. I copied everything I thought was important to a newly purchased hard drive.

One I had copied everything I possibly thought I could need, I did a new install. I was able to load Microsoft Office without any issues, and able to load AOL and connect using a dial up connection. When I attempted to set up the Verizon DSL, I ran into problems. When I use control panel to go to Network Connections - there isn't anything there. Completely empty. Verizon told me to call Dell and ask them to reinstall the nic card / ethernet connection. I also noticed that I do not have sound on the computer anymore. When on the phone with Dell I discovered they had not included the "driver and utility delldimension resource cd" when the shipped it to me, and it's no longer available.

Do you know what drivers I need to download from Dell's site and how to set up the network connections so that I can get DSL working?

How about for sound? I've only had the new OS up and r... Read more

A:Reinstalled Windows XP - drivers missing

Even though the CD is not available, you might try going to Dell's site to download the drivers.

Another possibility is to find out the manufacturer of the sound card and network card and download from their site.
 

Read other 2 answers
RELEVANCY SCORE 75.6

Hi, yes, I did something really stupid! I was having major issues with laptop and as a last resort decided to reinstall Windows [should have been Vista]. However, I have two Dell Inspiron laptops and apparently used the wrong disc! I installed Windows XP. Now I have no internet as the Ethernet driver, and a few others, are showing errors. I looked in Device Manager etc and about 8 or 9 drivers were not installed.

Oh, and the correct Windows disc is in US with my computer wiz son, and I'm over in UK! So . . . . is there anyway to install the missing drivers? Or even get Dell or Microsoft to help me get the correct version of Windows to reinstall?

I have internet access on my mini Dell, and also on my desktop - which does have CD writer etc if I needed to download files. Or can that be done on memory stick?

Any help/suggestions would be very much appreciated. [minus the 'dumb woman' remarks!!! I've beat myself up sufficiently]

Thanks so much
 

A:Reinstalled Windows using wrong disc - missing drivers

Read other 8 answers
RELEVANCY SCORE 74

Hello!

After having trouble with the Win32 heur or W32.sality virus I lost my patient and Completly reinstalled Windows XP Media center edition...


I had bought my PC from packard bell and had support, cd-backup + instructions and everything registered to packard bell, My PC Was A Packard Bell.
Then later my motherboard got trouble and crashed alot... So I eventually bought a new one.

When my pc got the virus I wanted to use the CD-backup I had taken from the pc before the motherboard was changed and also had the support of packard bell.
But the CD did not boot because "information was not valid" and I couldn't use it to reformat and reinstall my Windows XP MC edition.

So I used my student version of the CD, my other cd that would install windows media center edition and also the key for that cd.
I formated everything and left no partition so that superdangerous-virus would die.

After the installation I have no more internet connection and missing drivers installed. I can't update windows because it requires internet which I don't have on that PC. I also no longer seem to have packard bell support.

How can I get those drivers installed on my pc? I have no clue what about the names :( :( :(



I was really tired when I wrote this, hope you understand.

Every post and advice will be greatly appreciated.

A:[SOLVED] Reinstalled Windows XP - No internet connection + missing installed drivers

go into device manager and write down the details of any red "!" or yellow "?" and go on another computer that has internet and go to the manufature web site and download the drivers for the stuff missing and burn to cd or flash drive and copy them to your computer and install the drivers then setup a network conection.

Read other 19 answers
RELEVANCY SCORE 71.6

Hello guys, I am in desperate need of help with my drivers on my other computer.
http://puu.sh/8CzYm.jpg
That is a picture of my drivers and there are ! marks next to some of my drivers, idk why but i tried to update my drivers already but it doesn't work and I don't have internet connection on it, it says "No connections are available" Please somebody help me, thanks.
Edit:
I don't even think the "Other devices" is what is causing me not being able to connect to the internet. I think it might be "Network Adapters" so I included more pictures.

http://puu.sh/8CA1b.jpg
http://puu.sh/8CA2c.jpg
http://puu.sh/8CA2S.jpg
http://puu.sh/8CA56.jpg

I'm completely lost of what to do, I do have another computer I can use to transfer stuff but I'm not sure how to transfer programs since my other compute isn't connected to the internet to install them. I've tried. PLEASE HELP.
If you want to talk on skype it would be sooo much easier. Skype: hunter.tehee

A:Windows 7 Home Premium (64-bit) need help with drivers.

Hi Welcome to Seven Forums .. You need a Lan Chipset and Card Reader Drivers .. You should be able to obtain these from the Manufactures Website of your Computer .. The one you have listed in your Specs states it is a Sony .. If that is the one with the missing Drivers you should go to there Website .. But you will need to know the exact Model Number .. If you need further assistance we would be glad to provide that ...

Read other 9 answers
RELEVANCY SCORE 71.6

HEY.I was wondering if it is possible to update my drivers free,and if it is possible then where and how kind regards asser

A:Drivers for windows 7 home premium

Your specs say, ACER.
Check on the Acer website for update drivers for your Model.

Read other 9 answers
RELEVANCY SCORE 70.8

I recently reinstalled my Windows Vista Home Premium 32bit sp1 on my Dell Inspiron computer. Since then, the computer is not recognizing either of my USB wireless cards. When I try installing the adapters, it gives me an error saying "a device attached to the system is not functioning."

My mouse is a USB mouse and works just fine, but the adapters don't work when I plug them in that USB port.

Upon contacting Dell, they told me it was a problem with the USB wireless card. I find it hard to believe that it was a coincidence that I have two different wireless cards and neither of them work after reinstalling Windows Vista. Can anyone help?

The Wireless USB adapter that I am trying to use is a Wireless G WUA-1340 D-link adapter.

A:Reinstalled Vista Home Premium and now doesn't recognize USB wireless cards

Could be a faulty mainboard?

Read other 4 answers
RELEVANCY SCORE 70

I have windows 7 home premium and when I go to the control panel there is NO bitlock .  I was under the impression it is offered FREE in windows 7 ??  Also I am unable to find a download for bitlock in microsoft ?

Read other answers
RELEVANCY SCORE 70

I reinstalled my ms office home premium product ID- 00359 OEM 8992687 00010 , I need a key kindly tell me how to get.

Read other answers
RELEVANCY SCORE 70

Following some extremely helpful posts here, I've succeeded in installing Windows 7 Home Premium 64-bit on my HP Pavilion 15-n228us. I can't figure out how to adjust any settings on the touch pad / track pad, however. It's overly sensitive right now and interferes with typing. I assume I'm missing a driver that will enable me to control it?













Solved!

View Solution.

A:Touchpad / trackpad drivers for Windows 7 64 Home Premium on...

Look in Control Panel, change View by: Small icons at top right. Now you should see Synaptics icon.Open it to configure Synaptics. If you don't have Synaptics or don't have settings needed, try this Synaptics driver: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64969.exe

Read other 6 answers
RELEVANCY SCORE 70

Hey how's everyone doing?

So I got Hyper V installed on my computer last night and I followed the tutorial and set up Windows 8.1 Pro and installed Windows 7 Home Premium installed. Here's where my problem begins Windows 8 has no problem seeing my network in VM but I can't get Windows 7 to see any network drivers. I go under device manager and I don't see any network drivers but I do see 2 Unknown devices I assume are the drivers I need but how do I install them with no internet? I goolged my problem but Microsoft Tech Net said to install Integrated services but I don't see anything on how to install them. Any help would be awesome. I can post screen shots tonight when I get off work.

Thanks
Joseph P
Here's the link where I found the info about integrated services

Hyper-V guest OS has no network adapters

Read other answers
RELEVANCY SCORE 69.6

i have hpe210y- yesterday i turned off my desktop with power switch, today, the pc is not working it has message BOOT mgr IS MISSING   press alt+ctrl+del , and the screen keeps staying like that, i donot have product key or cds, the system is windows home premium 7,  and i had purchased as is ....operating .what should i do.only yesterday , it was working normally, i used to turn off from START , BUT I SWITCHED OFF, THIS TIME , and now  it doesnot start or do anything at all, the page stays :- bootmgr is missing..press alt+ctrl+del....

A:BOOTMGR FOR WINDOWS 7 HOME PREMIUM IS MISSING - press alt=...

That usually means that the hard drive has either been corrupted, somehing/someome deleted the Boot Manager, the hard drive has failed.  The typical call is to start up with a repair disk and pick repair the OS.  If that does not wotk then boot to a command prompt and run thesebootrec /FixMbr
bootrec /FixBoot
bootrec /RebuildBcd 

Read other 3 answers
RELEVANCY SCORE 69.6

I know this problem is a quick and easy fix, but I don't really have what I need.

I am trying to use a Windows 7 Ultimate PE cd to fix the BootMGR missing from a Windows 7 Home Premium. I know its incompatible, but it is all I have to work with, that or Windows 7 Professional. I was just wondering if there is a way I can make it possible to work with the Ultimate or Professional PE to fix this problem. this is a client computer and I have no idea of any other program other than EasyBCD but idk if that is bootable off a cd.

Any help or advice?

A:BootMGR missing. Trying to use a Windows 7 Ultimate PE on Home Premium

  
Quote: Originally Posted by countryb


I know this problem is a quick and easy fix, but I don't really have what I need.

I am trying to use a Windows 7 Ultimate PE cd to fix the BootMGR missing from a Windows 7 Home Premium. I know its incompatible, but it is all I have to work with, that or Windows 7 Professional. I was just wondering if there is a way I can make it possible to work with the Ultimate or Professional PE to fix this problem. this is a client computer and I have no idea of any other program other than EasyBCD but idk if that is bootable off a cd.

Any help or advice?



Welcome to SevenForums.

Bootmgr is missing - Fix

Read other 2 answers
RELEVANCY SCORE 68.8

I am missing these drivers after my win xp reinstall. I reinstalled twice and the same drivers are missing.

Ethernet controller
SM bus controller
USB controller
Video controller
Audio Controller
 

A:Reinstalled XP, missing drivers

Read other 16 answers
RELEVANCY SCORE 68.8

I have re-installed WIN 7 on my laptop. I did not have the cd's from Dell, so I purchased and used a WIN 7 disc. After re-installing WIN 7, my internet connection was not functioning. Under Device Manager, the following had yellow warning signs next to them:

Ethernet Controller
Intel(R) Centrino(R) Advanced-N+WiMax 6250
Network Controller
PCI Simple Communications Controller.

I am assuming that these devices are missing the drivers required for their operation. I tried running Intel_My_WiFi_Dashboard_15.1.1_s64. It told me I needed to install dotNetFx40_Full_Setup. I attempted to run this program, but a lack of an internet connection prevented it from completing. I am unsure of what to try next. Any help would be appreciated.

If this has already been answered under another post, I apologize for re-posting, and would be more then glad to read the original thread if someone can post a link.


Thank you for any help you have,

Desperate User.

A:Drivers Missing After WIN 7 Reinstalled

Go to the Dell support site for your model and download the appropriate drivers.

If you enter the service Tag number, it will tell you what was installed and recommend the right drivers.

http://support.dell.com/support/topi...t?docid=427825

Read other 9 answers
RELEVANCY SCORE 68.8

Hi everyone. I have a problem concerning the taskbar preview. It doesn't pop up anymore everytime i hover the cursor to an active program or window. I work with many windows so this is quite annoying, not knowing which windows containing what and which. Picture of preview not appearing already attached.
I have already tweaked through the windows aero advanced settings in control panel, and tried rebooting but it didn't work.

I run my windows on Asus ROG G75FR. Any response and help is appreciated.

A:Taskbar preview missing in Windows 7 64bit home premium

Try the troubleshooter for Aero, from Control Panel. Or type aero problem in the search box by the Start button

Read other 1 answers
RELEVANCY SCORE 68.8

I'm trying to remove windows components in the add/remove programs area, but there is no option for it in there. Any ideas on how to get it back so i can remove Windows Mail?

thanks in advance
 

A:Vista Home Premium Missing Windows Components Add/Remove

Read other 6 answers
RELEVANCY SCORE 68.8

_default.pif is missing from my computer. i dont know where its meant to be but it isnt there. i think its meant to be in c/windows/
theres a shortcut to it there but it wont work cuz _default.pif is missing. does any one have it?
 

A:Solved: _default .pif missing from windows vista home premium

Read other 7 answers
RELEVANCY SCORE 68.8

Whenever I try to install my (legit) copy of Windows 7 64bit a screen comes up and says no drivers can be found with the installation drivers. I am installing a new copy of Windows because I got a new motherboard (asus p7h55-m/csm). I have been searching around and people have been saying to turn off the on-board IDE setting to disabled but that just impairs my dvd-drive and doesn't let me use the disk because it's disabled..

-julian

A:Cannot install Windows 7 Home Premium 64bit, no drivers found screen

Are you booting to the dvd from cold start? What version of Windows 7 and is it oem or retail version?
Does anything else run right in your dvd player/burner?
Please tell us all the hardware and or make and model of pc if brand name.

Read other 5 answers
RELEVANCY SCORE 68.8

Windows 7 re-install driver recovery failure
Hello everyone. For one reason or another, i decided to re install windows 7 onto my Samsung 7 Chronos. Since I've had no issues in the past with re installing vista on my other machine, i mistakenly thought this would be a walk in the park. Anyway, now after re installing windows, multiple drivers have gone missing, and i cannot connect to the internet (on that machine) to allow windows to find them for me.Please help!

The devices that are missing drivers are the following
--------------------------------------------------------------------------------
ethernet controller (location PCI bus 3. device 0, function 0 manufacturer unknown)

Intel(R) Centrino(R) Wireless- N + WiMAX 6150 (location Port_#0003. Hub_#0004

Network Controller ( location PCI bus 2, device 0, function 0)

PCI simple communications Controller (location PCI bus 0, Device 22, function 0)

SM Bus Controller (location PCI bus 0, device 31, function 3)

Universal Serial Bus (USB) Controller (location PCI bus 4, device 0, function 0)
---------------------------------------------------------------------------------
(All of these devices have the code 28 error)

Also, My Standard VGA Graphics adapter cannot start (code 10)
I have the recovery disk for windows 7, yet it failed to install these drivers. I have 1 working USB slot, which i can use to carry the drivers over from the computer i am currently using, to the one which is severely crippled at the moment. Please... Read more

A:Fresh windows home premium 64bit install, important drivers are gone!

I'd go to Samsung support site with your good PC and locate the Ethernet driver for your particular model. Get it on a USB stick and install it to the PC with the driver problems.

I wouldn't be in a panic just because I had some yellow exclamation points in Device Manager. Instead, I'd investigate what expected functionality is missing.

Then possibly go back to Samsung and look for drivers to fix the missing functionality.

Read other 1 answers
RELEVANCY SCORE 68.8

As of yesterday, my HP Envy 6z-1000 laptop acquired a hive error. Unable to fix it, I simply installed a clean boot of Windows 7. In doing so, the "Recovery Partition" that comes factory installed on the computer was formatted and I no longer have access to the Recovery options provided by HP. I have contacted HP, but they only encourage me to purchase the 3 part Recovery Disc set.

The laptop boots perfectly into Windows 7 Home Premium. However, a few devices do not have drivers according to the Device Manager, including:

Ethernet Controller
Network Controller
PCI Device
SM Bus Controller
Universal Serial Bus Controller

Since I am unable to connect to the internet, I have been on two other computers downloading the drivers from the HP website for the HP Envy 6z-1000. I figured the most important would be the Network Adapter driver, so I downloaded the driver, copied it to a flash drive, plugged the flash drive into the Envy 6z-1000, moved the driver to the desktop and ran it. After going through the installation, the SWSetup folder was created and inside it was the SP57965 folder (which contains all of the files from the installation). Just as I normally would, I reboot the laptop to reload the drivers hoping that the Network Adapter would be recognized, but the adapter (and its drivers) is still not recognized. According the HP, the OS will constantly reject the installation of the drivers, even though I get no errors, so long as there is no recovery partition c... Read more

A:Fresh boot of Windows 7 Home Premium, drivers not installing correctly

Software & driver downloads HP ENVY Sleekbook CTO 6z-1000 | HP? Support

Just to be sure, you are using the drivers on that page? And, are you using the Broadcom or Realtek drivers?

Read other 9 answers
RELEVANCY SCORE 68

Hi, I recently reformatted and reinstalled Windows XP Professional on my HP Compaq nc6120 Notebook PC. After I finished, the internet wasn't working. It says i'm connected in the lower right hand corner, but I get no IP address when I do "ipconfig" in Command Prompt.

I noticed the laptop is missing quite a few different drivers though, and i'm pretty sure these are the problem. They're under "Other Devices" in my Device Manager:
--------------------------------------------------------------------------------------
These all have yellow !'s on them

Ethernet Controller
Mass Storage Controller
Multimedia Audio Controller
Network Controller
PCI Modem
PCI Simple Communications Controller
Video Controller
Video Controller (VGA Compatible)
--------------------------------------------------------------------------------------

I looked up my laptop on the HP website for the drivers and found it, but honestly can't make heads or tails of them. I don't know which drivers listed I need to fix the above driver issues.

Here is the link to the laptop drivers on the HP website: Here
Product: Compaq nc6120
s/n: CNU6121BQ3
p/n: PZ121UA

Hp support of course tried charging me to help me fix it. Not that I would have been able to understand the tech support guy if they did try to help (yay outsourcing).

Thanks to anyone who tries to help!
 

A:Reformatted/Reinstalled OS - missing drivers

Heres what you can try go to the HP website and for your model of computer download all of the xp drivers that you are missing in the device mgr.and for future use download all of the xp drivers so that you will have them. drivers are very easy to install once downloaded. if you have another computer to use to get the drivers put them on a cd or usb flash drive and install them to the computer that needs the drivers.
 

Read other 1 answers
RELEVANCY SCORE 68

I have a windows 7 home premium desktop HP Pavillion, and I began to look for videos on how to factory reset your computer, and so after following the video steps i did what the video told me, I restarted my computer, pressed f11, and then I clicked system recovery. I followed the instructions and got the error code 0xe0ef0003, so I clicked finish.

So then I rebooted my pc and then i began to get the bootmgr is missing press crtl+alt+delete.

Any suggestions on how to fix. I got a cds just in case and I only have another windows 8 laptop so i cant make a recovery disk on windows 8 laptop on a windows 7 computer. I can still run system recovery and the bios i'm doing a system repair but it's taking too long.

A:BootMgr is missing press ctrl+alt+delete HP Windows 7 Home Premium

Update: The system repair didn't seem to fix the problem.

Read other 4 answers
RELEVANCY SCORE 64.8

Drivers Missing After Installation of 32 bit Windows 7 Home Premium
HP EliteBook 8460p Base Model Notebook PC
Model #: WX562AV
[personal information removed]
1.Base Device Driver
PCI Slot 2 (PCI bus 36, device 0, function 1)
PCI\VEN_197B&DEV_2392&SUBSYS_161C103C&REV_30
PCI\VEN_197B&DEV_2392&SUBSYS_161C103C
PCI\VEN_197B&DEV_2392&CC_088000
PCI\VEN_197B&DEV_2392&CC_0880

1. unknown Devices
One says This
ACPI\HPQ0004
*HPQ0004

2. Unknown Device
USB\VID_138A&PID_003C&REV_0086
USB\VID_138A&PID_003C

Read other answers
RELEVANCY SCORE 64.4

I'm in a similar situation as this guy:
http://forums.techguy.org/windows-vista/1008546-how-replace-vista-full-windows.html

except when I boot up my disk, I only get to the 2nd step:

2) Progress Bar:
The next screen is a more graphical progress bar indicating Windows 7 is still working in the background.

it wont go past this screen.

The same thing happens when I boot it up normally(without the disk for windows 7 home premium), only with the disk in it has the windows 7 rather than the vista look.

Does anyone know what is causing this problem?
 

A:Solved: Replacing windows vista home premium with windows 7 home premium

Hi,
You've got this thread started too http://forums.techguy.org/windows-vista/1008564-laptop-hangs-loading-bar-screen.html

Is that one now solved too? You've marked this one solved, could you explain how you solved it in case others need to solve the same problem sometime in the future?

Thanks

Richard
 

Read other 3 answers
RELEVANCY SCORE 64.4

Hey all,

Just did a format on a client's machine that was just given to me. It had OEM Win7 Home Premium 32-bit on it, but there was no CD key tag on the case anywhere when I got home, so I used the Magical Jellybean Keyfinder to get the key from the OS. The System window in Control Panel stated the install was supposedly "Genuine".

I used an OEM Win7 Home Premium 32-bit disk I had laying around to reinstall the OS...all is well, OS is reinstalled, but now the OS won't activate the supposedly "Genuine" key that I had before, giving me an 0xC004E003 error code...?

Thanks for any and all help!

Some more info - I can't seem to bring up the "phone activation" option? No matter what I do with the options in System/Properties/"Activate Windows Now" there is NO option anywhere to choose a country and call for Activation like there should be...?

EDIT - Added the MGADiag Log file:


Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {72A6CAC7-348A-4D44-83C9-B0080069C1FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Sign... Read more

A:Reinstalled Win7 Home Premium - now Win7 won't activate?

This machine shipped with Vista installed (manufactured Oct 2008 and Windows 7 wasn't released until August 2009) - and cannot support a Windows 7 OEM_SLP Key such as this.
The earlier install must have been supported by a hacker's Activation Exploit.

The best option - if there is no COA sticker at all present - is to reinstall using the proper manufacturer's Recovery media for this machine.
Second best is to purchase a new Full Windows license.

Read other 9 answers
RELEVANCY SCORE 64

Greetings Tech Support Guy, The computer I wish to purchase has Windows Vista Home Premium preinstalled, with a ticket to purchase an upgrade To Windows 7 Home Premium.
As I wish to use Windows 7 immediately (without bothering with Vista Home Premium) can you please advise, in detail, how I can delete Vista completely and install Windows 7 with minimum fuss.
All help greatly appreciated,
With Best Regards
Outofthedarkness
 

A:Replacing Vista Home Premium with Windows 7 Home Premium

When you get the Vista DVD, boot from it and choose Custom "advanced" installation. Then highlight the partition you want to put 7 on (preferably the Vista partition) then click "delete" (be careful which partition you choose) once the old Vista partition is deleted, be sure the new unallocated partition is highlighted and hit next to continue installing 7. Here is a screenshot, your partition structure may be slightly different.
 

Read other 2 answers
RELEVANCY SCORE 63.2

So I downgraded from Vista to Xp home basic because I didn't like the way vista worked. Unfortunately something went wrong when I used my Xp boot disc and now I am missing the following devices:
Ethernet Controller
PCI Device
PCI Simple Communications Controller
SM Bus Controller
Video Controller (VGA Compatible)

Please help if you can, I have looked through countless forums and downloaded about 20 files already and I still haven't fixed anything.
 

A:Downgraded from Windows Vista to Windows XP Home Basic now I have missing drivers

First thing that needs to be clarified here, when you say "now I'm missing the following" what type of missing are we talking about here? Are the devices and such present inside your device manager and all that is missing here is their drivers? Or when you open up the device manager, all the above and stated hardware is gone? If this is a driver issue the fix or fixes could be relatively manageable. But if this is a case that nothing is there and indeed these devices aren't showing up with anything inside Windows, but you know they are there and still nothing, that might be a manageable thing to deal with, with the end result being perhaps a wipe of the disk and starting over from scratch. Maybe Windows didn't find these items when it was being installed for whatever reason or reasons. If you decide to install the O.S. again, I would first go into your computers BIOS and just with your own eye's, confirm the presence of these items, for if they are in BIOS and register fine, than they should translate over to Windows being able to find them as well. And while you are inside BIOS, doesn't hurt to make sure that nothing is switched off, just make sure all these items your talking about are activated or just active through BIOS and you should be fine.
 

Read other 8 answers
RELEVANCY SCORE 62.8

Hello folks,

Looking for the best overall ATI drivers for Vista Premium and a 1950 agp card. I'm having issues with the refresh defaulting back to 60hz on start up. I've searched the forums here and the web for two weeks now with no solution has worked. So at this point I'm just trying to find the best drivers for a senior system.


Sam H.

A:Best ATI drivers for agp and vista home premium

Sup Mr binkels,

Omega have customised ATI and NVidia drivers for gamaing, stability or general faults with the normal driver software...

OmegaDrivers.net - Home of the ATI & NVIDIA Omega Drivers. ATI

Read other 4 answers
RELEVANCY SCORE 62.8

I have HP TouchSmart 520-1102ee Desktop PC :-

Software & driver downloads HP TouchSmart 520-1102ee Desktop PC | HP? Support

equiped with win 7 home premium -x64 bit .. I ve update windows to latest updates , after that , Ive noticed that most of usb ports dosent work , also mouse & keyboared stop working , dvd drive disapeared & not working also .. tried to uninstall & reinstall these drivers , nothing changed .. tried to update these drivers but still as shown in the pic attached

I cant format this pc because I have many systems installed on it .. so can any one help me to solve this problem without format ??????

A:win 7 home premium drivers problems

Hi there ... Is there any error message in the Device Manager under your Processors driver details ? Have you tried Installing the Chipset Driver from the Manufactures Website ?

Read other 8 answers
RELEVANCY SCORE 62.8

My network card: RTL8168D/8111D
Laptop: Lenovo Edge 15. Model - 302 - 4CG

Nothing seems to work, wi-fi card is still not being recognized :F

A:Wi-fi card drivers for W7 32B Home premium

Have you tried this site: Lenovo Ideapad Support & downloads - Lenovo - Drivers & Downloads

Read other 4 answers
RELEVANCY SCORE 62.4

Hello Sevenforums,
This is my first post so please tell me if I do anything wrong. After using Windows Anytime Upgrade to upgrade my Windows 7 Home Premium to Ultimate and restarting, I get the "BOOTMGR missing error". Interestingly, if I shut down the laptop at this screen and turn it on, it loads the OS selection screen perfectly (Windows 7 and Ubuntu 11.10 dualboot).

I've tried the "repair windows" function, running the startup problems fixer, but to no luck.
Below is what came out from bcdedit:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>bcdedit

Windows Boot Manager
--------------------
identifier {bootmgr}
device boot
description Windows Boot Manager
locale en-US
inherit {globalsettings}
extendedinput Yes
resumeobject {c279be75-9b51-11de-9b93-a29d207e6d0e}
displayorder {current}
{f0c0bb8d-8788-11e1-864f-f78e62f68c09}
toolsdisplayorder {memdiag}
timeout 30
displaybootmenu Yes
customactions 0x1000085000001
0x5400000f
custom:5400000f {7f30e192-c241-11df-89c1-ec1233da63e2}

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
desc... Read more

A:"BOOTMGR missing" after upgrading Windows 7 Home Premium to Ultimate

Make sure Win7 HD is set first HD to boot in BIOS setup, Mark Active Win7 or it's 100mb System Reserved partition (preferred), run Startup Repair - Run 3 Separate Times until Win7 starts on its own.

Then use this method to Dual boot Ubuntu-Win7 which may help avoid GRUB irreparably corrupting Win7 when it's on the same HD.

Safest is to install each to separate HD's booted only via BIOS boot order or one-time BIOS Boot Menu.

Read other 9 answers
RELEVANCY SCORE 62

I currently have Windows Vista Home premium installed on my computer and need to upgrade to windows 7.
I understand I will  have to purchase it, that is fine, it has been suggested to look on amazon, etc. I just want to make sure of a product code or ID number specifically before i make any purchase.

As I said i currently have windows vista sp2, build 6002, and am wanting to upgrade to windows 7 sp1.

please advise.

Read other answers
RELEVANCY SCORE 62

Hey guys,

I want to upgrade my OS from Vista Home Premium to 7 Home Premium and I have the Anytime upgrade DVD (provided at the time when I bought my laptop which came pre-installed with Windows Vista Home Premium). Since this is the first time I will ever try to upgrade my OS and I will be paying for it (lol) I wanted to clear a few doubts before I went about it. My current OS is a Deutsch (German) version. I want my new OS to be in English. So my question is -

Will the upgrade process provide me with the option to choose an installation language?

I researched a bit about language packs and if I'm not very wrong, Multiple language packs work only for Business and Ultimate versions but not for Basic and Home premium. Third party language packs like Vistalizator has been reported to work fine but Microsoft doesn't recommend it and some users have reported to have problems where it pops the message " your windows is not genuine".

So should I do an upgrade or just do a clean install with an original Windows 7 Home Premium DVD?

A:Windows Vista Home Premium to Windows 7 Home Premium Upgrade

Welcome
I am not sure about the answer regarding the language pack, but I am sure about the upgrade or the clean install. Do the clean install. A clean install is always preferred over an upgrade. With an upgrade all the old problems that may exist with the OS are just carried to the new installation.
Upgrades often fail, either because of third party software that is not compatible, or malicious software that breaks in the new install.
There are some members that back up their stuff and do a clean install on a regular basis to have the OS run smoothly as the first day. Trust me go with the clean install and enjoy your new OS

Read other 1 answers
RELEVANCY SCORE 62

I recently reformatted my laptop from Windows 7 Home Premium 32-bit to 64-bit. Now when I install the drivers on my laptop I get the yellow ! , I don't know what I should install. My USB reader is not working and I can't get WiFi. I installed the RealTek driver but doesn't show available wireless networks.











Solved!
View Solution.

A:Drivers for HP ProBook 4530s Win 7 Home Premium 64-bit

Nothing that can't be fixed... Network Controller: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060887&swEnvOID=4058&swLang=13&mode=2&taskId=135&swItem=ob-108502-1 You probably need the bluetooth driver too: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060887&swEnvOID=4058&swLang=13&mode=2&taskId=135&swItem=ob-99500-1 PCI Simple Communications Controller http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060887&swEnvOID=4058&swLang=13&mode=2&taskId=135&swItem=ob-102185-1 Universal Serial Bus (USB) Controller: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060887&swEnvOID=4058&swLang=13&mode=2&taskId=135&swItem=ob-108572-1 Base System Device:  Both use the same driver. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060887&swEnvOID=4058&swLang=13&taskId=135&swItem=ob-115195-1&mode=3

Read other 10 answers
RELEVANCY SCORE 62

I build a lot of the machines I have for folding ([email protected]_stanford) and my very first baby is breaking my heart. Last Wednesday, Windows Update had a non-critical update for nVidia GTX250. So, i downloaded then installed but noticed some screen flicker in animated sections of web pages. I started to roll the driver back and that's when I noticed the GTX whereas I actually had forgot, that machine has a GTS250. So, Monday night, off to the real nVidia download site and pulled the upgrade for my GTS250. Same screen flicker.

Yesterday morning I grapped that first cup of coffee and headed to the PC in my home office and the screen was black. I did the nasty and held in the power button for 6 seconds and restarted the machine. I did NOT hear Vista boot up, thinking that I would. Also, I run Network Magic on my 2 router 16 machine bridged (wirelessly) network and from another PC I looked at the dead PC and it showed no connectivity to the network. Then I noticed there was no light on the USB port expander dongle that hangs from a front of machine port.

I took the DVI connector up to the onboard DVI port and the only difference was the screen said to check the monitor cable, it also comes up with NO signal, going to sleep when I turn the power on and off on the monitor alone.So, I pulled out a 6 foot VGA cable and tried that from the 21" LCD HP monitor to the onboard VGA. No change. Tried another flat screen monitor, no change.

Took all connectors loose a... Read more

A:Vista Home Premium and BAD nVidia drivers

Read other 7 answers
RELEVANCY SCORE 62

I have updated my mobile phone tools software to 5.07 and still unable to locate drivers for my w230 Motorola phone. Any help here.
 

A:W230 Drivers for Vista Home Premium

have you tried this

or this
 

Read other 6 answers
RELEVANCY SCORE 62

Hi all,
I am using home premium and IE8.
I have for nearly 2 years now had no problems with watching vids on win media player.
I have downloaded a "webinar" from a trading site...a vidoe file ending with .wmv
and when I click play the message box apears saying I have not got the correct codec to play this file!!!
I have downloaded freeware codecs such as FFDShow and AVI 6 but even after restarting it doesn't work.
Also after these were both installed the info at the bottom of the media player was all blurred as if done deliberately to stop reading of it.The "codec aquired" came up briefly in bottom left corner but when clicking play the same error box came up about a missing codec.
Any advice will be great on how I can find the right codec to play this file please.

Cheers,
Kevin

A:Missing Codec on home premium/IE8

Kevin. I have the same issue. Did you ever figure it out?

Ev

Read other 5 answers