Over 1 million tech questions and answers.

Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2937610) fails to install

Q: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2937610) fails to install

Get Code 800B0100 Windows update encountered an unknown error
Found https://answers.microsoft.com/en-us/windows/forum/windows_7-update/failed-to-install-security-update-for-net/e2db6092-c870-e011-8dfc-68b599b31bf5?auth=1
Tried
Method 1:
You may also try to download the standalone package from the below link and check if the issue persists.

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=025c5888-249a-4a5d-8776-af196f56b376
Only got the update is not for this computer.

Looked at
Method 2:
You may also try to download the updates in clean boot state and check if that helps in resolving the issue.
Putting your system in clean boot state helps in identifying if any third party applications or startup items are causing the issue. If yes, you may have to contact the program manufacturer for any updates or uninstall and re-install the program.

Refer the following Microsoft KB article for more information on how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135
Note:

After troubleshooting, make sure to put the computer to start as usual as mentioned in Step 7 in the above KB article
But none of the non-Microsoft could be disabled ex Symantec, Adobe Reader and flash.
Tried Malwarebytes and it did not find anything.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2937610) fails to install

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 104.4

XP keeps trying to install a security patch over and over again on start up, but fails with this message:Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)How do I fix this?(XP SP3. Virus/Firewall disabled during install)

A:Security Update for Microsoft .NET Framework 1.1 SP1 fails

This fix seems to have worked for many

Install the latest version of windows installer from here

https://www.microsoft.com/en-us/download/details.aspx?id=8483

Download and install KB2698023 manually.

Read other 4 answers
RELEVANCY SCORE 102.4

I was running a number of automatic updates, most of them installed, "Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)" did not. I just keep receiving "Error Code: 0x643".So far I've tried a number of fixes to no avail.I cannot really remember the exact links, But I tried two different Microsoft FixIts intended for similar problems:MicrosoftFixit.wu.LB.23276429008175881.2.1.RunMicrosoftFixit.ProgramInstallUninstall.MATSKB.RunI've also tried Miscrosoft's NetFxRepairTool.And finally I tried installing the newest version of Windows Installer and getting the file manually, but when I go to install "NDP1.1sp1-KB2698023-X86" it just keeps telling me "The feature you are trying to use is on a network service that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'netfx.msi' in the box below." and it shows me this box where I can browse for a location. I have no idea what the location would be, or even if what it wants is actually on this computer.On a side note. I've been having this message pop up in my browser allot lately: "Security Warning. Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. Are you sure you want to continue sending this information?" Mostly, if not only... Read more

A:Cannot install Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP (KB2698023)

Download the KB2698023 to desktop and try to install from there -Next run the automated troubleshooter in this KB article from start to finish, reboot & see if the update will install:? How to fix MSI software update registration corruption issueshttp://support.microsoft.com/kb/971187If no joy, see...? You receive ?0x80070643? or ?0x643? error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updateshttp://support.microsoft.com/kb/976982Now try the first link again -If these are the ones you have used, please post back and we can look for other ways to install -

Read other 14 answers
RELEVANCY SCORE 96

I try to install "Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x86 (KB2446708)" using windows Automatic update service, in many times, but i can't. Always show "66A error". Windows update center only show error for this "Microsoft .NET Framework 4 " update. (Other updates successfully install.) Then i manually downloaded its .exe installer and try to install it. Then i receive this error. How do i install this security update?


Windows Update center error.


Manual installation error.

A:Why can i install Security Update for Microsoft .NET Framework 4?

Try this:

Error code 66a .net framework 4 - Microsoft Answers






Quote:
A. Click on Start and click on Control panel.
B. Go to Program and Features.
C. Scroll down to Microsoft.Net Framework 4 Client Profile, right click it.
D. It will give you a choice of Uninstall/Change, click it.
E. Then, it will give a choice to Repair it, pick Repair it. It will take about 4-10 minutes to repair (with my PC) your experience may vary.
F. When completed, go to your update center, and update it again.

Read other 5 answers
RELEVANCY SCORE 89.2

Hi!

When installing update KB2937610 on a Windows 7 Home Premium x64 system the update fails and this error code appears: 80073712.

This problem occurs on a PC from an acquaintance.

I couldn't upload the CBS.zip file using this forum, so I uploaded it to MediaFire: http://goo.gl/GyHNQc

Thanks in advance.

A:KB2937610 update fails

The error indicates a corrupt WINSXS store - but CheckSUR hasn't found anything.

Here's the detail of the error message.

Code:
Stage (1): flags: 8 app: [microsoft.visualbasic.compatibility.data.resources, Version = 6.1.7601.18523, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture = [l:10{5}]"nl-nl", VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral]) comp: (null) man: @0x65d0e18
2014-10-07 11:58:40, Error CSI [email protected]/10/7:09:58:40.875 (F) d:\win7sp1_gdr\base\wcp\componentstore\installmap.cpp(620): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function InstallMap::CRawInstallMap::GetComponentWinningVersion expression: (null)
[gle=0x80004005]
2014-10-07 11:58:54, Error CSI 000003c6 (F) STATUS_SXS_COMPONENT_STORE_CORRUPT #661253# from CCSDirectTransaction::OperateEnding at index 22 (0x0000000000000016) of 171 (0x00000000000000ab) operations, disposition 0[gle=0xd015001a]
2014-10-07 11:58:57, Error CSI 000003c7 (F) HRESULT_FROM_WIN32(14098) #650902# from Windows::ServicingAPI::CCSITransaction::ICSITransaction2_AddComponents(Flags = 4, a = @0x44d2850, mp = @0x44d3050, disp = 0)[gle=0x80073712]
2014-10-07 11:58:57, Info CBS Failed to add one or more component [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-10-07 11:58:57, Error CBS Failed to complete component closure [HRESULT =... Read more

Read other 9 answers
RELEVANCY SCORE 87.2

I keep installing the following update and it says it installs successfully but then keeps wanting to install it every time I reboot. Any fixes?

Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x86 (KB2478663)
Installation date: ‎7/‎15/‎2011 9:32 AM
Installation status: Successful
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=211425
Help and Support:
http://support.microsoft.com

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2939 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1341 Mb
Hard Drives: C: Total - 294694 MB, Free - 146962 MB; G: Total - 238414 MB, Free - 166866 MB;
Motherboard: TOSHIBA, Portable PC, Base Board Version, Base Board Serial Number
Antivirus: Webroot AntiVirus with Spy Sweeper, Not Updated
 

A:Problems with Security Update for Microsoft .NET Framework 4 on Windows 7 (KB2478663)

Have you tried downloading the patch directly from Microsoft? Save it to your hard drive and then run it.
http://go.microsoft.com/fwlink/?LinkId=211416
PS. You'll want the last of the three download links which has the text NDP40-KB2478663-x86.exe. The others are for different types of processor from yours.
 

Read other 2 answers
RELEVANCY SCORE 85.6

Here's the relevant part of the very "Verbose" eventog (most relevant in RED):MSI (s) (F8:2C) [18:01:35:000]: Executing op: ActionStart(Name=CA_CacheGACAssemblyDeferred.3643236F_FC70_11D3_A536_0090278A1BB8,,)MSI (s) (F8:2C) [18:01:35:000]: Executing op: ActionStart(Name=CA_CacheGACAssemblyRB.3643236F_FC70_11D3_A536_0090278A1BB8,,)MSI (s) (F8:2C) [18:01:35:000]: Executing op: CustomActionRollback(Action=CA_CacheGACAssemblyRB.3643236F_FC70_11D3_A536_0090278A1BB8,ActionType=1345,Source=BinaryData,Target=RollBackToCacheAssembly,CustomActionData=C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\GAC33810\System.configuration.dll)MSI (s) (F8:F8) [18:01:35:015]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI267.tmp, Entrypoint: RollBackToCacheAssembly07/14/06 18:01:35 DDSet_Status: LANGID: 103307/14/06 18:01:35 DDSet_Entry: PatchPFROAssembly started - Rolling back to preinstall state of the GAC07/14/06 18:01:35 DDSet_Status: CustomActionData: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\GAC33810\System.configuration.dll07/14/06 18:01:35 DDSet_Status: ProductCode: {7131646D-CD3C-40F4-97B9-CD9E4E6262EF}07/14/06 18:01:35 DDSet_Status: Calling Fusion on C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\GAC33810\System.configuration.dll07/14/06 18:01:35 DDSet_Status: Loading mscoree.dll07/14/06 18:01:35 DDSet_Status: Loading fusion.dll using LoadLibraryShim()07/14/... Read more

A:Installation Of.net Framework 2.0 Security Update Fails

Are you doing the installation thru Windows Update or thru a file that was downloaded?If thru a downloaded file - the install file may have a problem - delete it and re-download and try installing againIf thru Windows Update What problem are you having with Windows Update? Use Internet Explorer for this task.http://support.microsoft.com/gp/wusupport

Read other 12 answers
RELEVANCY SCORE 85.2

Security Update for Microsoft Framework 2.0 SP2 on Windows Server 2003 and Windows XP x86 (KB2572073) keeps saying it needs to install even after it's installed several times. I've used Microsoft's Mr. Fixit? and it says it repaired the Windows Update component and the update still says it needs to be installed. Any ideas? J.R.

A:Security Update for Microsoft Framework 2.0 SP2 on Windows Server 2003 and Windows XP x86 (KB2572073)

Hi, J.R.
Are the updates listed in Add/Remove Programs? Make sure the box is checked to include updates.

Read other 1 answers
RELEVANCY SCORE 84.8

This won't load for some reason and keeps popping up as an extremely important update and cant figure out why it wont install. Please help.
Thank you in advance!
Danny

A:Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Wi

Try temporarily disabling your antivirus application and if you have a third-party firewall installed, enable the Windows firewall temporarily but disable the third-party one.

This has solved the same problem for many other people according to what I've read elsewhere on other forums. Seems to be a common problem with Net Framework updates.

If this solves the problem and the update installs okay, you can re-enable your antivirus and third-party firewall, but remember to disable the Windows firewall as having two firewalls running together is not advisable.

Read other 1 answers
RELEVANCY SCORE 84.8

Hi,

I have an update which refuses to install:

Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2742599)
Download size: 8.0 MB
You may need to restart your computer for this update to take effect.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it. You can help protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
MS13-004: Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: January 8, 2013


The installation keeps failing due to uknown error with a code: 800B0100

1. System Update Readiness Tool - every run it succesfully installs one update, but nothing changes, Security Update for Microsoft .NET Framework stays uninstalled.

2. SFC Scan - Windows Resource Protection did not find any integrity violations

3. Error Code - 800B0100

4. Logs - I couldn't attach the whole CBS file, because
"500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed."
However I uploaded CBS file on sendspace: Download CBS.zip from Sendspace.com - send big files the easy way
If the CheckSUR.log file is the only one needed, you can find it attached below

5. Additional ... Read more

A:Cannot install "Security Update for Microsoft .NET Framework 3.5.1"

I downloaded and installed this update manually and it helped... So solved I guess.

Read other 1 answers
RELEVANCY SCORE 84.8

The above 2 updates keep coming to my Windows Update but when I install the (2) KB's it says download not installed "Try again" and in History "Install Fail". Please help me, sooo frustrated at this point, usually don't have
issues

Ruth M. Stauffer

Read other answers
RELEVANCY SCORE 83.2

My windows 7 system had .Net Framework v. 4.5.1 installed and windows update notified me of a security update. Every time I try to install it, it fails with an error code 643. I did some googling and found a couple of things, including a Microsoft Fix-It (that didn't work) and a .NET Repair tool (that didn't work). So I went and uninstalled it completely. Then windows update shows an update available of course, the .NET 4.5.1 so I re-installed and it failed the install. When I re-boot I get an error saying I need to install .NET 4.0.30319.

what's going on? Why does it keep failing the install?
 

A:Solved: .NET Framework Update and Install Fails

Read other 12 answers
RELEVANCY SCORE 83.2

Hi,

I cannot install this as I keep getting an error saying it cannot be installed. I don't necessarily want it, I just don't want the update to display anymore. Is this possible?

Do I need another update to replace it?

Thank you,
Lynne
 

Read other answers
RELEVANCY SCORE 81.6

KB982670 .NET Framework 4 Client Profile update keeps failing to install. The registry only shows versions 2, 3 and 3.5 but not 4. Is this why the update keeps failing? And if I don't have version 4, why does KB982670 keep trying to install?

PS - Do I need version 4, and if so, what else do I need to install to get this update to install? Any help really appreciated.

Read other answers
RELEVANCY SCORE 81.2

Windows XP SP3 [32-bit] Internet Explorer v8

Microsoft/Windows Update works when you let it "automatically" install updates - i.e. Click on "Turn Off".

It fails when I try to do it manually.

NOTE: It is only the install that fails - "A problem on your computer is preventing updates from being downloaded or installed". I have no problem selecting and downloading updates.

I have tried a number of ideas posted here and elsewhere. But, so far, nothing has resolved the issue. This is not a result of a repair, serivice pack update, etc. I tried Dial-a-fix also, but it did not work either.

A:Microsoft/Windows Update Install: Fails Manually - Works Automatically

http://wiki.lunarsoft.net/wiki/Dial-a-fix

Run ALL these. If that doesn't fix it, hit the tool button and reinstall BITS.

Read other 19 answers
RELEVANCY SCORE 80.4

this all started november 2012 where every time i tried to run updates the net framework 4 kept failing

since then all other updates have been sucessful except this one
all i get is "error code 643" and there is barely any help online about this
Does anyone know how to fix this?
its getting annoying now having to "Ctrl Alt Del" then shut down without installing

i have uploaded a screen print showing the ones i am talking about and the error code

i have tried the windows fix it application that your linied to when clicking that link but it did nothing

running Windows 8 btw

A:Microsoft .Net Framework 4 Security Update Failing

Hi see the posts and links here Solved Windows Update Error Codes 64C and 643 - Windows 7 Help Forums they may help

Read other 1 answers
RELEVANCY SCORE 79.6

Security Update for Microsoft .NET Framework, Version 2.0 (KB922770)

This "update" has installed itself at least a dozen times. Each time it says it has successfully installed. (no reboot necessary) Then about 5 minutes later I get the icon showing "Updates are ready for your computer. Click here to install these updates." and it is the SAME one again!!

Any ideas what it going on?
 

A:Security Update for Microsoft .NET Framework, Version 2.0 (KB922770)

Just wanted to add, I have rebooted my PC (even though it did not say to) but this same "update" shows up again & again
 

Read other 1 answers
RELEVANCY SCORE 79.6

This appears to be a language pack error. Failed to update error 00000002 What is that even mean? I typed in this error code here and get no matched results 130 views so far and no one has any idea? HeLp? And thank you!

A:Security Update for Microsoft .NET Framework 1.1 SP1 Failed error 2

try to disable the firewall, check if there is any other security software , you should not have more than 1 security software. email me if the problem persist again

Read other 3 answers
RELEVANCY SCORE 78.8

It tells me updates are available. I try to download Microsoft .NET Framework 1.1 Service Pack 1 and it gives me error 652. What's up with this and how can I fix it? Thanks in advance!

Read other answers
RELEVANCY SCORE 78.8

Running Win 8.1 on a Lenovo U530 (factory specs).
I can't update the microsoft.net framework to 4.5.2 or 4.6.1.
I've tried a clean boot, the microsoft.net framework repair tool and windows update repair tool. The update repair tool fixed 3 issues and after doing so showed that there was no framework update for my pc. As soon as i began to manually download it however,
i then got a popup saying there were updates (surprise surprise, it was .net framework finally coming to its senses). And of course it didn't mean squat, the update still fails. 
On further attempts of various methods I did notice that the .net framework version 4.5.2 fails to install, while the 4.6.1 will "rollback" its installation, although this doesn't seem to have any effects ill or otherwise. 

Read other answers
RELEVANCY SCORE 78

Windows Update  KB 2901983 failed to install. error code 643.  Consequently I am unable to install Adobe, Photoshop Elements 13. The problem is occurring on  Dell, Latitude notebook model E6400, Intel Core 2 Duo CPU, Windows 7 Ultimate, 32-bit.  How can I determine what's preventing the update from installing and correct the problem? 
 
 

Read other answers
RELEVANCY SCORE 77.6

Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2656370) can't be installed on my Clevo (Mesh) D480W. Windows automatic updates keep proposing it but keeps failing since yesterday morning.

Thanks for help.
 

A:Security Update for Framework 1.1 SP1 won't install

Read other 11 answers
RELEVANCY SCORE 77.6

When attempting to run a Windows Update, I get notifications that 3 updates fail.

I've run the SURT & SFC scan. SFC scan reported: "Windows Resource Protection did not find any integrity violations."
The error/codes copied from the Windows Update window are:

Code 80070057 Windows Update encountered an unknown error.

Code 9C48 Windows Update encountered an unknown error.
The error/codes copied from Event Viewer System log are:

Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 11 for Windows 7 for x64-based Systems.

Installation Failure: Windows failed to install the following update with error 0x80070057: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610).

Installation Failure: Windows failed to install the following update with error 0x80070057: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211).

Windows logs are attached.
Thanks in advanced for the assistance!

A:Windows Update fails on IE 11 & .NET Framework 3.5.1

It looks to me as if you had some severe problems back in May this year - which were apparently fixed.
The question is... How did you fix these problems? 'Fixing' them by using a 'registry cleaner' could well produce the type of problem you are currently seeing.

Do you still have any System Restore points from around this time? (Please do NOT attempt to use them, if so - it may create even more problems)

Please post your C:\Windows\windowsupdate.log file.

Read other 9 answers
RELEVANCY SCORE 76.8

Anyone here having probs trying to install this latest update from Microsoft?I'm running Winxp home sp2.The update just sits in my system tray and when i tries to install it it fails.Any answers on this one?
 

A:Solved: Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB928366)

Read other 16 answers
RELEVANCY SCORE 76.8

Hi guys,

three updates according Microsoft .NET framework 4 always FAIL for like 2 months now, the update codes are KB2468871, KB2539636 and KB2533523 and the error code for the three updates is 643

im running Windows 7 starter 32 bits

Any help would be appreciated

Thank you.

A:Windows Update Fails updating Ms .net framework 4

Anyone ? please

Read other 9 answers
RELEVANCY SCORE 76

I want to manually install the Windows 7 May Security and Quality Rollup for .NET Framework (KB4019112).  The Microsoft Update Catalog lists 4 downloads, 1 MSU and 3 exe's. 


ndp45-kb4014514-x86_ba1e0f83e4c469329f0155b52f637f1a13fd4e44.exe
ndp46-kb4014511-x86_5f79ae2826e102deb33ebd5dc7dd13c4a6837844.exe
windows6.1-kb4014504-x86_19943397671b6e639eaa94f91ecc506de823496b.msu
ndp46-kb4014508-x86_4f1326efe09b1ccbc400462831ab00d578756569.exe

Do I just install each one individually?  If so does order matter?

Read other answers
RELEVANCY SCORE 75.6

Do I need this update?  Is it something I should worry about?  It has been failing to install since mid August 
 
 

Security Update for Microsoft Silverlight (KB3080333)
 
Installation date: ‎9/‎4/‎2015 12:47 AM
 
Installation status: Failed
 
Error details: Code 656
 
Update type: Important
 
This security update to Silverlight includes fixes outlined in KB 3080333.  This update is backward compatible with web applications built using previous versions of Silverlight.
 
More information: 
http://go.microsoft.com/fwlink/?LinkId=618672
 
Help and Support: 
http://go.microsoft.com/fwlink/?LinkID=105787
 

 
Thank you
 
Ann
 

A:Security Update for Microsoft Silverlight (KB3080333) Fails every time

Silverlight is Microsoft's version of Flash. The only major service to use Silverlight is Netflix. So unless you're a big Netflix user, you won't need it much. The product has been such a failure that there has been talk that Microsoft may phase it out. You probably don't need the update.

Read other 0 answers
RELEVANCY SCORE 74.8

Quote:




Some Updates were not installed

The following updates were not installed

Installation Failure: Windows failed to install the following update with error 0x80070643: Microsoft .NET Framework 2.0 Service Pack 2 Update for Windows Server 2003 and Windows XP x86 (KB976569).

Installation Failure: Windows failed to install the following update with error 0x80070643: Microsoft .NET Framework 3.0 Service Pack 2 Update for Windows Server 2003 and Windows XP x86 (KB976570).

Installation Failure: Windows failed to install the following update with error 0x80070643: Microsoft .NET Framework 3.5 SP1 Update for Windows Server 2003 and Windows XP x86 (KB982168).

Installation Failure: Windows failed to install the following update with error 0x80070643: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003, and Windows XP x86 (KB979909).

Installation Failure: Windows failed to install the following update with error 0x80070643: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Update for Windows Server 2003 and Windows XP x86 (KB982524).

Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x86 (KB2418241).

Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for Microsoft .NET Framework 3... Read more

A:[SOLVED] Microsoft Update Fails to Install

I note these are all Net Framework Updates, did you ever install the originals which you can do from "Optional Software" at the Windows Update site?

Read other 7 answers
RELEVANCY SCORE 73.6

Hi,
I have my PC set to automatic updates. I have no problems with installing the updates apart from KB2698023. It fails to install and I get a message saying, "Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)". The Windows Updater keeps trying to install this update, and it fails every time. Is there anything I can do to rectify this problem?

Many thanks.

A:Security Update KB2698023 fails to install.

Download DotNetFX_Cleanup Tool uninstall all versions of .Net Framework. Go to Windows Update and download .Net Framework in proper order, starting with 1.1 and ending with 4.5

Read other 3 answers
RELEVANCY SCORE 72.8

Hi I tried twice today to download and install the following updates, Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86. it is a large update taking approx 30mins to download the 248MB package. Both times it got to the end of the download and the next I got was a message saying installation failed. At first I thought it was Comodo BoClean so turned it off the second time but got the same result anyway.
My PC is an AMD Athlon XP2400+, 1GB of RAM running on XP3 and updated via Automatic Updates "notify but do not install". I got a MSN email notification on IE8 RC1 and decided to check my Firewall connection to Microsoft Update, where I was told that the mentioned updates were available and decided to install them though not IE8 at this time.

For real time protection I use Comodo CIS, Comodo BoClean and SpywareBlaster. I switched off BoClean the second time and set CIS to installation mode both times. I cannot see anything else on my PC which could hinder the installation process. In my Add/Remove program list I have Microsoft .NET Framework versions 1.1,1.1 Hotfix, 2.0 Service Pack1, 3.0 Service Pack1, 3.5, Should I uninstall these before installing the latest version or should they all remain on my installed programs?. I would appreciate it if someone could offer some help here as I like to keep my PC up to date.

A:Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86

Hi .Well...let's start with the reason you have MS .NET installed on your system.What applications/drivers do you use which require any version?If you have no such applications...IMO it's not even necessary to install any version of MS .NET on a system. Doing so is a waste of time for those who don't have applications which demand MS .NET.http://forums.techarena.in/customize-xp/866859.htmLouis

Read other 8 answers
RELEVANCY SCORE 72.4

I haven't downloaded this update as I have dial-up and it says 26-48 hours to update this. Also, I had to reformat my computer three times with the SP3, even downloading from disk instead of internet - so scared to download Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 as don't want to have to reformat (and also don't want my computer running for 2-3 days to download).
Are there problems with this download like there were with SP3 (I ended up never being able to have a working computer with SP3)? Do I need this update? Will there be problems if I download from internet, and if not any other ways to update this (for free)?
Thank you.

Read other answers
RELEVANCY SCORE 72

My current java version is 8.45 (32bit), and I use windows 7 64bit enterprise.

My java update failed when I was trying to update.
The error code is 1603.
 

A:Java update fails after install Bitdefender Internet Security

Uninstall java with GeekUninstaller with it's left over, use ccleaner to clean trash & try to download new version of java & run it. R u sure Bitdefender is not blocking the update?
 

Read other 10 answers
RELEVANCY SCORE 71.6

This update won't install and I had trouble once before...a long time ago... installing this update. I went to Google for a fix and on some forum a tech told me to un-install the ver. 2.0 that I have on there now...reboot...and then d/l the new update. I didn't bookmark the forum unfortuneately. Now, my system won't even allow me to un-install the old ver. 2.0 so I'm at a loss as to what to do. Does anyone know how to fix this? Thanks!
 

A:Solved: "Security Update for Microsoft .NET Framework, Version 2.0 (KB922770)"

Read other 8 answers
RELEVANCY SCORE 71.6

I have been having an issue installing an update in Windows Update for a while.
The update I am having issues with is:
 
Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista,     and Windows Server 2008 x86 (KB2833941)
Download size: 15.3 MB
You may need to restart your computer for this update to take effect.
Update type: Important
A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.
More information:
http://go.microsoft.com/fwlink/?LinkID=296794
Help and Support:
http://support.microsoft.com
 
Every time I try to install it it gives me this error:
 
   Code 643   Windows Update encountered an unknown error.
 
In event viewer it tells me this:
 

-

System


 

 


-

Provider


 

 

 

[ Name]

Microsoft-Windows-WindowsUpdateClient

 

 

 

[ Guid]

{945a8954-c147-4acd-923f-40c45405a658}



 

 

... Read more

A:Windows Update Failed - Security update for .NET framework

Try the Fix it at Microsoft Support.

Read other 6 answers
RELEVANCY SCORE 70.8

Hi
I've been having problems for the past month with .dll files claiming to be missing and it's completely messed up my system, I'm unable to use any function of windows media viewer/player, almost no games on steam work anymore either.

I looked around for ages and tried as much as I could and not a single thing worked, then a few weeks ago I stumbled across my windows update history and found out these updates have continuously failed (Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64).

I've seen a very similar post made by nimanouri here about 3 months ago but I'm not entirely sure if my issues are the same, I've run the sfc /scannow and received the message "Windows Resource Protection found some corrupt files but was unable to fix some of them"

I've attached the CBS log file
Thx for any help people can give

A:Windows update error code 2 for Microsoft.NET Framework 4.5,4.5.1...

Here's the error list from the SFC scan...

Code:
Line 81478: 2015-06-19 22:00:22, Info CSI 00000546 [SR] Repairing 17 (0x0000000000000011) components
Line 81479: 2015-06-19 22:00:22, Info CSI 00000547 [SR] Beginning Verify and Repair transaction
Line 81480: 2015-06-19 22:00:22, Info CSI 00000548 [SR] Cannot repair member file [l:56{28}]"sRGB Color Space Profile.icm" of Microsoft-Windows-ICM-Profiles, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 81481: 2015-06-19 22:00:22, Info CSI 00000549 [SR] Cannot repair member file [l:18{9}]"RSWOP.icm" of Microsoft-Windows-ICM-Profiles, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 81482: 2015-06-19 22:00:22, Info CSI 0000054a [SR] Cannot repair member file [l:22{11}]"wscRGB.cdmp" of Microsoft-Windows-ICM-Profiles, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, fil... Read more

Read other 9 answers
RELEVANCY SCORE 70.4

Hi 
We have an issue with this security update, as it keeps on failing to install in windows update.
I receive error code: 851A004A
What I have did was to manually install the the update from the MS site, and the machine shows it has been installed and when I ran updates again, windows updates picks this security update again even though its installed. 
I have removed SQL server 2012 developer edition  and all of its components, restarted the machine. Did windows updates and then installed SQL 2012 again and manualy installed KB3045321 and still after running windows updates, windows shows tries
to install this update. 
My company runs reports from WSUS regarding failed windows updates. This machine appears in the report even though its installed. I have tried hiding this update and still it appears in the report. 
I then built another machine, did windows updates, installed SQL server 2012 developer edition ran windows updates and again it fails to install the security update. It gives the same error message 851A004A. Again installed update manually and still
windows updates tries to install this update again. 
Any ideas ? 

Read other answers
RELEVANCY SCORE 70.4

I am unable to update the Kernel-mode driver framework ver 1.11 for windows 7 for x64-based systems (KB2685811). I get error: 80073712

Also, I am getting BSOD/stop errors in normal mode that say anything from:

-memory_management 0x0000000001a,

- "A device driver attempting to corrupt the system has been caught. The faulty driver currently being on the kernel stack must be replaced with a working version." GDRO.sys-
address fffff88000626a8f9, base at fffff88006269000, datestamp 49b9d125

I'm not sure if they are related.

When I run in safemode I do not get the BSOD. When in normal mode I will get BSOD consistently when running Norton Full System Scan, specifically when the full system scan gets to the Windows/system32 folder.

System specs:
Processor: Intel 2500K Core Duo Unleashed
MOBO: Gigabyte GA-p67A-UD3P
RAM: I have 4x4 Corsair Vengeance, only using 1 stick of 4GB corsair vengeance currently due to troubleshooting.
GPU: NVIDIA EVGA GTX570HD
HDDs:Intel 180GB SSD and Western Digital Caviar Black 1.0 TB (empty)
PSU: corsair 750 watt
Soundcard: MOBO

When I canoo

A:Unable to install Windows Update: Update Kernel-mode driver framework

I, again, apologize for double posting. I figure I should include the host of other issues I'm having. Maybe they can all be inter related.

-my DVD/RW drive, when connected to mother board in ANY SATA slot, causes the BIOS screen to freeze forever. I have disconnected the drive at this time while trouble shooting. I have tried known-good SATA cables so I know it's either the DVD/RW drive or perhaps a driver or mobo failure.

-I have run the memory diagnostic tool in windows. No issues were reported.

-I have NOT run memtest86 because I do not have a disk drive connected.

-I have had stop-errors (BSODS) such as PFN_list_corrupt, System_service_Exception, Memory_management, IRQ_not_less_or_Equal
All of these could be a result of bad RAM.

I have purchased new RAM as a means to fix my problems. It seemed to work for 2 weeks, then the stop errors returned.

Read other 9 answers
RELEVANCY SCORE 70.4

Hello,

Recently Microsoft has been trying to update my software with a security update

{Security Update for Microsoft Office XP (KB921596)}

Unfortunately something is going wrong and I am told that Microsoft was unable to update the security update.

At the moment when I switch off my PC, the turn off button is showing the multicoloured shield next to it (meaning it will update before switching off)

I think it is trying to update the same security update as above.

The situation has been like this for maybe a fortnight now.

Please could you help me to sort the situation out.

Many thanks

Regards Richard Milner.

PS, My security software (Kaspersky Internet Security 2009) has been flashing up a message about Key logging (what ever that is) whenever I click on & open up my media playing program InterVideo WinDVD 5.. Could this have anything to do with the aforementioned Microsoft Security update ?
 

A:won't install update - Security Update for Microsoft Office XP (KB921596)

I have the same problem and still no answers???
 

Read other 2 answers
RELEVANCY SCORE 70.4

Hello,

Recently Microsoft has been trying to update my software with a security update

{Security Update for Microsoft Office XP (KB921596)}

Unfortunately something is going wrong and I am told that Microsoft was unable to update the security update.

At the moment when I switch off my PC, the turn off button is showing the multicoloured shield next to it (meaning it will update before switching off)

I think it is trying to update the same security update as above.

The situation has been like this for maybe a fortnight now.

Please could you help me to sort the situation out.

Many thanks

Regards Richard Milner.

PS, My security software (Kaspersky Internet Security 2009) has been flashing up a message about Key logging? (what ever that is) whenever I click on & open up my media playing program InterVideo WinDVD 5?.. Could this have anything to do with the aforementioned Microsoft Security update ?

Read other answers
RELEVANCY SCORE 70.4

I recently put together my first custom build and I am running into a very frustrating issue with the "Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610)".

Error Code: 800B0100

Normally I'm the kind of person that likes to figure things like this out on my own using Google and reading over old posts in forums like this, however I have exhausted my resources as well as my patience..

Here is what I've tried (in no specific order):
Reformat SSD, reinstall Windows 7, installing updates immediately after.
Ran sfc /scannow, it didn't find anything wrong.
Ran MS Fixit, tried installing update with no luck, restarted, tried agian (did this twice)
Ran Windows Update Readiness Tool, tried installing update with no luck, restarted, tried again (twice)
Went to control panel > Programs and Features > Repaired .NET framework 4.5.1, didn't help
Uninstalled .Net Framework 4.5.1 and let windows update reinstall it, didn't help
Used the Microsoft .NET repair tool, didn't help
Used d7 (tech tool, I work at a pc repair shop) to repair Windows Update
Did a clean boot using msconfig method
CHKDSK found no problems
I even manually downloaded the update from MS and ran the installer. It ended with "Some updates were not installed", and listed the update as not installed.
Windows is installed on the Samsung EVO 840 SSD.
(I'm hoping my hardware shows up in my signature or something otherwise I'll... Read more

A:Windows Update Failing KB2937610 with Error Code 800B0100

Shouldn't be too difficult
Here's the errors from CheckSUR...

Code:
Unavailable repair files:
servicing\packages\Package_10_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_10_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_3_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_3_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_4_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_4_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_56_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_56_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_5_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_5_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_9_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_9_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB... Read more

Read other 7 answers
RELEVANCY SCORE 70.4

Hi

I'm using Win 7 x64
I've got a problem with KB2937610 for over a month.
I've tried to install it manually, use MSFixit and install it from clean boot. Neither worked.
Recently I found this forum, so here I am to ask for help.
(I'm sorry if I made any grammar mistakes, my English isn't prefect).

A:Windows Update KB2937610 failure; error code 800B0100

You have some missing OS files as well - but here's the summary from the CheckSUR log...

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
I'll post a fix protocol when I can get to it - probably tomorrow.

Then we'll need to fix the other errors.

Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.17514_pl-pl_fab1504c7d13b602
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.18156_pl-pl_fab5265a7d104a83
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.22326_pl-pl_e3e47e9896ba5ed5
(amongst other possible ones - more later)

Read other 7 answers
RELEVANCY SCORE 70.4

New here and need help,
Windows Update KB2937610 failure; error code 800B0100
No idea what went wrong, check sur gives

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-09-30 13:13

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_1_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_8_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_8_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2937610_SP1~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2937610_SP1~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Secon... Read more

A:A new Windows Update KB2937610 failure; error code 800B0100

You can try this page?
Windows Update error 800B0100 - Windows Help

Read other 5 answers
RELEVANCY SCORE 69.6

Hi,

I'm using Win 7 x64 and I've got a problem with KB2937610 and KB2972211 for a long time now.
Neither of them installs. Errorcode returned is 800B0100.
I tried a bit everything I normally do like installing the update directly from the knowledgebase but nothing seems to bite.
It looks like you have been succesful solving this for others so I hope you can help me.

Attached the CBS log folder. I had to remove some .cab files or it would have been to large but all log files are there.
Attachment 340490

I also run SFC /SCANNOW but that came up clean (no integrity violations).

Thank you in advance for your help

A:Windows Update KB2937610 and KB2972211 fail; error code 800B0100

Quote:
Summary:
Seconds executed: 2162
Found 312 errors
CSI Manifest All Zeros Total count: 292
CBS MUM Corrupt Total count: 10
CBS Catalog Corrupt Total count: 10


At first glance, this looked as if it was a candidate for a repair install - but it may not be that bad.
I think most of the file problems are related to a single update, so I'll try and post a fix some time tomorrow.

Read other 9 answers
RELEVANCY SCORE 69.6

Greetings fellow Windows enthusiasts,

I was asked to update our Windows 2008 R2 server from IE 10 to IE11, and it will not install properly.  I have looked up several solutions to this issue, so far nothing has worked.

I disabled McAfee HBSS in safe mode, restarted the PC and tried to run Windows Update managed by a WSUS server.  The update gets approved and pushed out to the 2008 R2 server.  It downloads IE11, tries to install, then fails/errors-out at the last
second.   I have tried this a few times, rebooted and either get error code 9C47 or 9C49.  


Some of the fixes I have tried:


I turned of internet connectivity and the anti-virus, that did not workI tried the Windows Update repair tool, that did not work  I tried the Windows System Readiness tool, that did not work   I tried to scan the system files for errors with sfc /scannow
and that did not work  I tried installing the other updates first, restarting and it still fails I removed the server from WSUS and re-added it and it will not update   I tried the stand-alone IE11 installer, and it fails at the very last step and then gives me an error with a link to troubleshoot IE installations   I have uninstalled IE10, and now am totally stuck with the absolutely horrible experience of IE9 SURT returns no errorsSFC returns no errors
Technical information:

I have checked the Windows Update log file, the last errors that I found ... Read more

Read other answers
RELEVANCY SCORE 69.2

I keep getting an update from MS for .NET Framework 1.1 SP1 that fails to update. I have .NET Framework 3.5 installed om my XP SP3 machine. The update always fails and leaves to following message "Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (KB953297)" I don't have any actual problems, but I never know if the update includes anything I should install or just the .NET update.

Any suggestions?
Darryl

A:.Net Framework Update that fails

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.

Read other 1 answers
RELEVANCY SCORE 69.2

I am having issues updating Mircrosoft .net Framework 1.1. This is happening on two machines. One is a laptop running Windows Vista Ultimate and the other is a desktop running Widows XP. I tried to uninstall it, but i just get an error saying: the installation source for this product is not available . . . I downloaded the .net Framework install from Microsoft's website and tried to install it. That did not work either.

Any ideas what needs to be done at this point?

Thank You
 

A:.net Framework Update Fails Always

Read other 11 answers