Over 1 million tech questions and answers.

2000 Terminal Server

Q: 2000 Terminal Server

I just loaded up Windows 2000 Professional (Installed, same thing) how do I run/configure Microsoft Terminal server/

RELEVANCY SCORE 200
Preferred Solution: 2000 Terminal Server

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: 2000 Terminal Server

Do you mean the Terminal Services Client? You need a W2K server running Terminal services to connect to. the client is on the w2k server disk. Install that and configure to the server.

Read other 1 answers
RELEVANCY SCORE 74.8

On XP you have remote desktop, which is basically terminal server, but on a workstation. Is it possible to run a terminal server service on a 2000 workstation also?

Cheers, Dan
 

A:Terminal server on 2000 workstation

I had the same question and could not find an answer. It seems TS cannot be installed on a 2k workstation. You can however load remote desktop on a win 2k client. You can also run netmeeting which allows remote desktop sharing
 

Read other 1 answers
RELEVANCY SCORE 74.8

We have Windows 2000 Terminal Services running and working with IE5. Once a user upgrades to IE6, we can no longer get an authentication screen. We can access the initial screen where we enter the server we are accessing, then in 5.0 the next screen to open is the authentication window to enter our user ids and passwords. With the upgrade to IE6, the second screen opens but nothing happens, the authentication window is replaced with a picture holder and white box with a red x. Does anyone know how to get 2000 Terminal Services to work with IE6?

Thanks
 

Read other answers
RELEVANCY SCORE 74.8

I have recently been granted the the honor of installing an additional Win2000 Server on a 50+ user LAN running TCP/IP. This is the second Win2000 server running Terminal Services on the network (the other is too slow as it also has Exchange 5.5 and Active Directory running). It will be used exclusively by 5-8 users over a T-1 connection, acting as an application server (they are using Outlook and Corel Word Perfect Office 2000 to access client files on a Linux file server). This may be a Corel issue, but they are having mucho problemos utilizing their custom keyboard strokes (macros) over terminal services (the macros just stop working or do a totally different thing alltogether). I have told them to not use macros over a Terminal Server as I thought they were iffy over a terminal server client but they are set in their ways. Corel reccommends going to an all Linux LAN but they have problems with 2000 Workstation and Windows 98! I can't find any advice in any Corel or Win2000 pubs. Also, are there any "tweaks" you can reccommend to speed up their terminal services connection? They lock up often and lose information (Word Perfect docs get corrupted alot). Please Help!
 

A:Windows 2000 Terminal Server

Greetings

As far as speeding up a terminal service goes, all I have for you is the obvious:

1) Set the desktop to 256 colours maximum (16 would be better, but I think your users might revolt)

2) Disallow wallpapper pictures

3) Disallow any "additions" like Hotbar browser skinner for IE.

4) Make the maximum screen size 800x600
Basically, the way you speed up a Terminal Server session is to drecrease the information being sent to and from the server. Since what is being sent to the server is merely keyboard strokes and mouse clicks, there is not much you can do there. You can, however, speed up the images being sent to the clients by making them less complex. Less colours, less size and less variation will help with that.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/multiboot

Every morning is the dawn of a new error...
 

Read other 1 answers
RELEVANCY SCORE 74.8

We are currently running Windows 2000 Server. I know that Windows 2000 has Terminal Server built it. I want to add this function for a new software package we are getting ready to install. I need this done prior to installation so I don't have to go around to every computer. Can this be done without messing up my current network settings or the files that are on the server. I am not willing to jeopordize the files on the server for this function. Any ideas.
 

Read other answers
RELEVANCY SCORE 73.2

<H2>NT Terminal Server, DCOM, Office2000 + Inserting objects!</H2>
I get the message "an unexpected error occured" when trying to follow a hyperlink (to a webpage) in Word2000 running in a Citrix ICA client: Microsoft mention this problem for Word97 (in conjunction with Visual C++) - I don't have C++ installed!
Is there anyone who has seen this happen? Or have an idea as to how to fix it?

Ammendment:
I also cannot open/create/edit any insertable objects (eg Microsoft Equation 3.0), I gather this has something to do with COM and DCOM.

It takes 5 minutes for VISIO2000 to start up if DCOM is enabled (using Dcomcnfg.exe) but it starts up immediately if DCOM is turned off.
Does anyone have any pointers?

Thank you already for any help!

[This message has been edited by jom (edited 11-17-2000).]
 

Read other answers
RELEVANCY SCORE 73.2

I am moving a NT 4.0 Terminal server to a Windows 2000 domain from the current NT 4.0 domain. What is the best way to do this for a server? Is it the same procedure as for a workstation? This server is also a Citrix server.
 

Read other answers
RELEVANCY SCORE 73.2

Hello my name is Adam. I am a desktop/lan admin for a warehouse supply company in New York. We run a strictly Windows 2000 domain with about 70 computers and maybe 3 or 4 Windows XP machines. I recently enabled a Terminal Services Server to allow 3 or 4 of my users to run database intensive Apps on the server. The reason for this is when they use specific functions in our "in house application" the app freezes up until it has finished its process (allocation of goods for large orders, takes about an hour tops). The app freezes up to do its job and the user is left with nothing to do because they cant touch the app until its done. So by enabling terminal services for them, they can run there allocations on the Terminal server, minimize it and keep doing there work on there computers.

Now, along with the Terminal Service Server, I am aware I need a Terminal service license server enabled on the network within 90 days. I have yet to enable a license server because I am somewhat unclear on its neccesity. I have read in the microsoft documentation

http://www.microsoft.com/technet/pro...s/default.mspx

that machines with Windows 2000 on them already have built in licenses and therefore you do not need to purchase additional licenses. The documentation also states that if you do not enable a license server, anyone without a pre issued license will not be able to connect. My question is this, if I am only connecting to the terminal services server via Windows 2000 Machin... Read more

A:Windows 2000 Terminal Services License Server

Read other 7 answers
RELEVANCY SCORE 73.2

Hello my name is Adam. I am a desktop/lan admin for a warehouse supply company in New York. We run a strictly Windows 2000 domain with about 70 computers and maybe 3 or 4 Windows XP machines. I recently enabled a Terminal Services Server to allow 3 or 4 of my users to run database intensive Apps on the server. The reason for this is when they use specific functions in our "in house application" the app freezes up until it has finished its process (allocation of goods for large orders, takes about an hour tops). The app freezes up to do its job and the user is left with nothing to do because they cant touch the app until its done. So by enabling terminal services for them, they can run there allocations on the Terminal server, minimize it and keep doing there work on there computers.

Now, along with the Terminal Service Server, I am aware I need a Terminal service license server enabled on the network within 90 days. I have yet to enable a license server because I am somewhat unclear on its neccesity. I have read in the microsoft documentation

http://www.microsoft.com/technet/prodtechnol/win2kts/default.mspx

that machines with Windows 2000 on them already have built in licenses and therefore you do not need to purchase additional licenses. The documentation also states that if you do not enable a license server, anyone without a pre issued license will not be able to connect. My question is this, if I am only connecting to the terminal services server via Windows... Read more

A:Windows 2000 Terminal Services License Server

IM moving my post to the Windows forum. Sorry bout that
 

Read other 1 answers
RELEVANCY SCORE 71.6

Hi,

We have a Windows 2000 Terminal Server, which keeps having problems with the spooler service. When I log on, the server is very slow, and the spoolersv.exe is at the top of the CPU usage list. Then, the spooler service stops and I loose all my printers. I have set the spooler service to automatically recover, and restart if stopped, but this keeps happening, and the performance and reliablilty is very poor. There are 53 printers in the printer list, and there are no end of warnings in the event log telling me that printers are being added and pending deletion. But as I understand, this is normal within terminal services. Has anyone come across this problem before?

Thanks a lot for any help,

Daniel Murfitt
 

A:Printer spooler service keeps stopping on Windows 2000 Terminal Server

I have had this problem when a printer installation is corrupt, if you can't pinpoint the guilty printer I would delete them all and then re-install them.
 

Read other 1 answers
RELEVANCY SCORE 62

Will someone please explain to me briefly what the difference is between all of these? Why would one want one over the other?

I guess that Windows 2000 is sort of like NT Workstation. If not, please tell me.

And what is the difference between Windows 2000 Server and 2000 Advanced Server?
 

A:{Advice Offered} - Windows 2000 Professional, 2000 Server, 2000 Anvanced Server--the difference?

Greetings

Win2K Professional is, indeed, just NT Workstation 5.0

The real difference between Win2K Server and Win2K Advanced Server is scalability. To quote a CNET article: "Three versions of the operating system will be available next week (it's an old article): Windows 2000 Professional, aimed at PCs and workstations; Windows 2000 Server, for file-and-print servers; and Windows 2000 Advanced Server, supporting clustering, which is a way of making several systems act as a single, more powerful computer.

To quote the FAQ from www.winmag.com:
Windows 2000 Professional is the workstation edition of Windows 2000. This is basically Windows NT Workstation 5.0, although Win2K Professional of course includes all of the new technologies for Win2K.

Windows 2000 Server/Advanced Server is the server edition of Windows 2000, which is designed to serve small- to mid-sized businesses and workgroups. Server supports up to 4GB of physical RAM and up to 4 processors per computer. Advanced Server supports up to 8GB of RAM and 8 processors per computer.

Windows 2000 Datacenter Server is designed for large businesses and computer clusters. Datacenter supports up to 32 processors per computer and up to 64GB of RAM, as well as built-in clustering and load-balancing features.

Is that what you wanted?

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning i... Read more

Read other 1 answers
RELEVANCY SCORE 59.2

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 59.2

I don't know if this is help for our server or Excel I am looking for. Here is the issue...

Whenever one lady is logged into a session on our server, she opens a word document that has an Excel worksheet embedded in it. The second she tries to click on the Excel worksheet, Dr. Watson makes a call and hits me with the following message...

Error in Excel.exe
Access Violation (0xC0000005), Address: 0x304632a3



When she tries to just open the Excel program, she gets this error:

Compile Error in Hidden Module: ThisWorkBook

This only happens to her, should I make a new profile on the server for her? Is there something in Excel I can do? I am so lost and MS Knowledge base has been of no help to me.
 

A:Excel Shutting Down on Windows NT Server (Terminal Server, Citrix Metaframe)

Try this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q169718

And this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q172211

Or look here for more, http://search.support.microsoft.com...Type=ALL&maxResults=150&Titles=false&numDays=
 

Read other 2 answers
RELEVANCY SCORE 59.2

Hiya

Microsoft Windows Terminal Server lets users run Windows®-based applications on a remote computer running one of the Windows Server 2003 family of operating systems. This white paper contains testing methodologies, results, analysis, and sizing guidelines for Windows Server 2003 Terminal Server. Hewlett Packard working in cooperation with Microsoft to perform the initial sizing tests and data collection in HP labs. Microsoft performed the final round of testing and analysis collection using Hewlett Packard equipment. The tests were performed using Windows Server 2003, Enterprise Edition, build 3790.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word
http://www.microsoft.com/downloads/...63-7c42-4372-ab37-d8c8987a71da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 59.2

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 58.4

I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...

1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?

2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?
 

A:Terminal Server license server(s)? RDP client for Windows2K?

I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.

For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.
 

Read other 1 answers
RELEVANCY SCORE 58.4

I've been having a lot of trouble with this and I hope someone here can shed some light on this for me...It's driving me crazy! Thanks in advance for any suggestions!

We're using Windows 2000 Server in Terminal Server/Application Server mode. the Clients are Win98 boxes. Every so often, (once or so every 2 to 3 months) all of a sudden, All the Printers will disappear and a reboot seems to be the only way to get them back. I've tried restarting the Spooler with no effect. I've gone to Microsoft's site and been unable to find anything on the topic.

Last time this happened my System Log was full (could this cause that?). The last entry was:

Event Type: Warning
Event Source: Print
Event Category: None
Event ID: 2
Date: 5/27/2004
Time: 1:41:35 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
Printer hp LaserJet 1300 PCL6/DEB/Session 2 was created.

In addition to this error message in the Sys Log, I also receive the following two errors frequently and they were also the first two entries in the Sys log after rebooting:

Event Type: Error
Event Source: Print
Event Category: None
Event ID: 31
Date: 5/27/2004
Time: 1:41:57 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
PrintQueue CN=NICO2-Generic / Text Only could not be created under Container LDAP://NICO1.nico.local/CN=NICO2,CN=Computers,DC=nico,DC=local because Mandatory properties could not be set. Error: 80070005

&

Event Type: Error
Event Source: Print
Event Category:... Read more

Read other answers
RELEVANCY SCORE 55.6

I have a server running Windows 2000 Small Business Server. It has been running 100% for almost a year now and now I'm having hassles with remote access, I connect to the server and after a while my connection gets dropped and I have to try and reconnect, sometime I have to try a few time before I can reconnect.

I have run ADSL speed tests and am getting a descent response time but was still being booted, I have now tried logging in and running a continuos ping to a website and this seems to keep the connection open. - Ok just checked this and now after about an hour it has dropped my connection again

Has anybody experienced this problem before and does anybody know what to do to fix this annoying problem.
 

Read other answers
RELEVANCY SCORE 54.8

I am trying to set up a windows 2000 server with terminal services running and one of the applications that i would like to in stall is office 2000 but there are some special instructions for doing this. There are also some required files that you can get from the Office 2000 resource kit. I am wondering if anyone knows of a place to download these files from the internet or if any one has them. I have found one of the files (orktools) but i am still missing (termsrvr.mst). The system i am setting this up on is for testing purposes to determine weather or not i need to spend the extra cash on citrix.

Thanks
 

A:Office 2000 and terminal services

I didn't check for sure, but it looks like you can get it here:

http://www.microsoft.com/office/ork/2000/journ/OutlTermSrvr.htm
 

Read other 1 answers
RELEVANCY SCORE 54.8

. To optimize performance for remote administration when you use Terminal servers, you should do following:
A. In the specify the RDP-TCP properties dialog box on the terminal server specify: Automatically end disconnects sessions, disconnect idle sessions after 5 minutes and disable wallpaper.

B. In the specify the RDP-TCP properties dialog box on the terminal server specify: Disconnect idle sessions after 5 minutes, disable wallpaper and in the registry set the entry under HKEY_LOCAL_MACHINE\system\current\controlSet\Terminal Server to 0.

C. In the specify the RDP-TCP properties dialog box on the terminal server specify: Automatically end disconnects sessions, disconnect idle sessions after 5 minutes, disable wallpaper disable windows printer mapping, LPT port mapping, clipboard mapping and in the registry set the entry under HKEY_LOCAL_MACHINE\system\current\controlSet\Terminal Server to 1.

D. In the specify the RDP-TCP properties dialog box on the terminal server specify: Automatically end disconnected sessions, disconnect idle sessions after 5 minutes, disable wallpaper and in the registry set the entry under HKEY_LOCAL_MACHINE\system\current\controlSet\Terminal Server to 1.

E. In the specify the RDP-TCP properties dialog box on the terminal server specify: Automatically end disconnected sessions, disconnect idle sessions after 5 minutes, disable wallpaper and in the registry set the entry under HKEY_LOCAL_MACHINE\system\current\controlSet\Terminal Server to 0.
&... Read more

Read other answers
RELEVANCY SCORE 54.8

This morning i am having issues with my company's remote site connecting to our server. I have a facility here and everything is fine. The Remote site there are three machines. They have been connecting for years and this morning nothing. They get online but can not connect via RDP. Just errors out, can not connect. I can connect from home just fine. Oh and heres a weird part. The vista machine can connect but two xp machines cant. HELP!
Thanks
Steve
 

Read other answers
RELEVANCY SCORE 54.8

Hi all,
My task is to allow my accountant access to my MYOB files. He tells me his clients usually do it through Windows Terminal Services (which I guess is the Terminal Server software). A few questions to start: How do I find out if its been installed; how do I enable it? and how do I get into the configuration of it? I'm new to this one but Ive got Logmein and XPUnlimited to work in the (distant) past ....
The other totally newbie question I have is .... Once its setup, what does the person that wants to connect to my machine do to connect?
Thanks
T.
 

A:XP and Terminal Server

XP does not have Terminal Services; TS is available on Windows Server versions only. Instead, XP has a part of it called Remote Desktop. Certain versions of XP can act as a Remote Desktop server.

What are MYOB files, and what type of access does he need? (Meaning, what is he doing with them?)

BTW, which version of XP do you have?
 

Read other 1 answers
RELEVANCY SCORE 54.8

I am setting up terminal services using windows 2000 server. Does anybody know of any good texts or documentation is on how to do this. I have some bits and pieces form all over the place but I thought somebody here might be able to better direct me.

Thankyou in advance
Shukran
 

A:Terminal Server

Here's a pretty good site: http://windows.about.com/cs/terminalservices/
 

Read other 1 answers
RELEVANCY SCORE 54.8

now that i have all my users logging in remotely to the terminal server, they are filling up the c drive and it is having problems. how do i get the users info not to be housed on this drive? I want all the users to use the f partician.
All info has been greatly appreciated!
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 54.8

Can I add terminal server role to my domain controller? The domain contoller only holds the files of the folks in the active directory. No databases run on this computer.
As of now the DC will only allow just the two administrative log ins and I have setup the terminal services licenses for 150 users on another computer in the domain.

Thanks.
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 54.8

Think I probably know the answer to this, but worth a shot.

I've got a bit of software that I've loaded onto our server and would like to be able to be accessed by people logging in.

When I run the application, it comes up saying that it can't be run on Windows Terminal Server.

Is there any options that I can adjust to enable this or will it simply not run?
 

A:Terminal Server

Probably not.... it usually helps to mention the software name though.

If it expressly says it won't run on terminal server then I highly doubt it will.
 

Read other 2 answers
RELEVANCY SCORE 54.8

Hi all hope someone has an idea because I am clueless.
helping out a Real estate office, they have Windows 2000 server which shares files and has a few apps, and runs terminal server for about 25 on and off users. The server is bogging a bit at the terminal database program, so i figured adding a second 2000 server to ease the terminal services load made sense. Also thought why not make it a bdc as well, good backup, but use the bdc for terminal services, double duty. My 30 or so accounts with settings already created so makes sense.

I installed the second machine, added it and promoted it to 'seconday server'. Within 10 minutes my users are populated from the pdc in user manager, beautiful. Except I can't log in to the bdc at all with anything but 'administrator". Whether through terminal services, or right at the console, any account other that administrator fails. "The system could not log you on, be sure username and password are correct" etc.

Am I missing something? Can I do what I'm trying to do?

Any help or clues would be appreciated!

Thanks all
 

Read other answers
RELEVANCY SCORE 54.8

Location One :--- Head Office

I have one Terminal Server which have local IP Address as what I am using the IP range in company. IP Address of the server is configured in my SGS Firewall and is linked with Global IP Address.

Location Two :--- Ware House

I have one computer in warehouse which is using Dialup connection to connect with the Head office to access one folder.

Please Help :---

How can I connect warehouse computer with this terminal server through Dialup.
 

A:Please Help Terminal Server

start with this ms article
 

Read other 5 answers
RELEVANCY SCORE 54.4

I know I can use products like Radmin or VNC to control a W2K system remotely. But what I need is something that will create a remote 'session' like terminal services does. That is, I don't want to interfere with the current user of the w2k workstation. I just want to access that systems resources in the backgroud....

I know there is software from MS to used w2k to connect to another system. But I need to connect from another system, to a w2k workstation.
 

Read other answers
RELEVANCY SCORE 54.4

How do i set it so that one user can only have 1 terminal server session open at once? (in 2003 server it is easy to configure but not in 2000). What is happening at the moment is that users disconnect without logging off and go to logon again but it opens a whole new session so that results in 2 terminal server processes running for the one user which means wasted server resources.

Thanks in advance
 

Read other answers
RELEVANCY SCORE 54.4

I installed remote desktop on my 2000 client but i still cant log iinto it from my xp pro box. I can however log into my xp pro desktop from the 2000 pro client . I also notcied that terminal services is running on the xp box but its not available on the 2000 client. Is there a solution to this?
 

A:how do you load terminal services on a win 2000 pro client

Read other 11 answers
RELEVANCY SCORE 54

Hi all,

My network administrator is gone for 2 weeks and so, wouldn't you know it, a term server has gone belly up. How do I set one up to communicate with it to set its config from my winxp computer? I need to assign it an IP address and subnet address, etc... to be able to telnet in and log the ports right?

the term server is a MRV 8008 and it came with a crossover cable and female 9 pin to rj45 adapter. I plugged the crossover cable from my com1 port to the number 1 port on the term server yet I am not able to make a connection to it.

any help would be great.

thanks
 

A:setting up a terminal server

can you see the server at al from your XP comuter? If so, go to remote desktop from your XP and log in using the IP of the server.
 

Read other 2 answers
RELEVANCY SCORE 54

Problem : I am running W2k Terminal Server, User logs in and automatically starts program they are using. When they go to print I get an access violation, and refuses to print. Printer is a HP 4050 that is networked to client side NT4 server. Client is using Win98, and terminal server client.

When I run these same clients in a Terminal server windowed enviroment, and start my program from the desktop, and try and print, I have no problem printing = no Acces Violation.

any suggestions would be welcome.
 

A:Terminal server printing

Read other 7 answers
RELEVANCY SCORE 54

Hello, this is my first post and I'm kinda lost at this point. I know this is a Windows 7 forum but I need help desperately. I have a new windows server 2008 standard 32bit terminal server setup. The users log in to run several applications and do their printing. The server blue screens constantly while people are working. I am almost cretin the cause is print driver related. Please help me troubleshoot the minidump. The dump contains two separate days I tried to go live with the new box. Thank you for your help!

A:BSOD on new terminal server

Welcome

All the dumps show memory corruption
Run memtest86+ on each stick of ram for 8 passes
RAM - Test with Memtest86+

Read other 3 answers
RELEVANCY SCORE 54

I have a user who is conneccting to our VPN server via
the internet remote connection. He stays connected for
anywhere from 15 minutes to an hour and a half. Then he
is kicked off with a VBscript remote desktop disconnected
internal error has occured error. When he tries to log
back in again he cannot find the server. I need to
reboot so that he can log in again. Had him ping the IP
and it timed out. Anyone know what is going on with
this??

 

Read other answers
RELEVANCY SCORE 54

I am trying to get Office XP Pro to work using terminal services. The problem is when my users log in and try to access an office application they get an error:

"Only Administrators have permissions to add, remove, or configure server software during a terminal services remote session. If you want to install software on the server, contact your administrator."

I also get two errors in my event log. I have attached screen shots of the errors. The only thing I know for sure is that it is some sort of permissions issue. If I add the users in question to the local admin group on the server the errors stop.

I have been online and researched this until my eyeballs have fallen out but have had no luck. Any help would be greatly appreciated!

Thanks,
schony
 

Read other answers
RELEVANCY SCORE 54

This has been happening for a while now, several times per week. I notice activity on my Terminal Services Manager, and when I look at it I see that someone/something is trying every second to log onto it. It trys, gets bumped, and then immediately trys again.. until I disable my WAN to terminal server. Then he goes away when he can't hit it anymore. Now, there are only 4 users in this terminal server, so I know its an outside source. I am running Windows Server 2003. My question is, what can I do??? Is there a way to trick him? Let him on my server, but in a digital sandbox environment? I used to be able to see an ip, for a split second, but now it appears its masked. I am using default port of 3389 to listen for my clients, so I am about to change that.. But still feels to passive. I am mad about seeing someone trying to break into my house (analogy). Is there software that will let an attacker know that I am not going to stand for this? Thanks to techguy forums. I have been here a lot, just never asked a networking question. Have a great day folks.
 

A:Bot trying to hack my Terminal Server..

bump.
 

Read other 3 answers
RELEVANCY SCORE 54

hey does anyone know where i can get a list of terminal server compatable printers just need to know what will work so can make recommendations would appreciate any suggestions
 

A:Terminal server and printers

the vendor site of the terminal server?
 

Read other 1 answers
RELEVANCY SCORE 54

I am trying to install Quickbooks Enterprise so that it runs as a Termnial Server session. Since Intuit is no longer supporting Canadian versions of this software I have no luck getting the proper procedures from them to complete the install. Does anyone know what is required to get the install done? Should be the same as the US version.
 

Read other answers
RELEVANCY SCORE 54

On a shared printer from a NT Server I keep receiving an Event error 8775 Out of Disk space. I can print from NT server with any user I give permission to print with this printer. But when I install it on terminal server I can only print from administrator account even though the users have permission. This printer is a Deskjet 895C and connected to a Dlink printserver. I have a NT member server managing the que and is shared. I can't understand why it is not working! I just got done connecting a LJ4 with the exact print server and also connecting to terminal server and that is working fine.
 

A:{Resolved} - Terminal Server

I will answer my own question. I read on a website about the incompatability between HP printer drivers and NT Terminal Server. I used a Deskjet 660 driver in the place of the Deskjet 895 driver and worked and is currently printer for users on TS. Just wanted to share that in case anybody else runs into it.
 

Read other 3 answers
RELEVANCY SCORE 54

I'm new to the forum and not too tech savvy, so please be patient.

OS: Windows 7 64 bit

Laptop: ASUS Notebook K60IJ Series

I work from home a lot by remoting in to my PC at work. Last week I was able to remote in just fine, but today could not using my laptop. I could remote in using my wife's laptop just fine, but could not using mine. I get the following error:

Could not connect to terminal server

I can log into the network just fine. I have a random passkey that I enter etc. But, when I put in my workstation ID and try to connect, I get the above error.

Again, I was able to log in just fine using my wife's laptop today, but not mine

I have not made any changes recently (that I know of)

Any help would be greatly appreciated. If you give me something to try, please provide step by step instructions on how to complete the steps. Thank you

Update:

This seems to be an Internet Explorer issue. I downloaded and tried to remote in using Firefox and it worked just fine. Any ideas why IE is now giving me issues? Is there a setting that changed? I was gonna try to uninstall and reinstall IE, but it does not come up in my list of programs to uninstall...

A:Cannot connect to terminal Server

Go into System Restore and restore your PC to a date before you started having trouble. If you are not familiar with the process, look at this tutorial System Restore Let us know how it goes. This will not erase any of your data.

Read other 1 answers
RELEVANCY SCORE 54

I cannot get any Terminal server clients to connect to our Exchange Server.
We run Terminal Server on a Windows 2000 server and are using Exchange 5.5 and Outlook 2000.
When I log into terminal server and try to setup a user profile I get an error "The name could not be resolved. The microsoft exchange address book was unable to log on to the Microsoft Exchange Server computer. Contact your system administrator if the problem persists.
I am able to ping the Exchange Server by the IP address.

Any idea?

Thanks

Jill
 

A:Terminal Server and Exchange

I have a feeling that its going to be something to do with Active Directory, and Users and Groups. Does the user whose profile you are trying to set up already have a user account in both the W2K domain and on the Exchange server?

This article offers a fix for a very similar problem, without really explaining why the fix is necessary.
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q255843

If you can't get Terminal Server to work, have you considered setting up Outlook Web Access, as this is really easy to configure and demonstrate to your users?
 

Read other 2 answers
RELEVANCY SCORE 54

I have a NT 4.0 terminal server with the citrix server installed as well. The problem I am having is that when youre logged in and idle after a certain time you gett disconnected. Your processes still run on the server. When you log back in you're supposed to be right where you left off, however Word 2000 is coming back screwy where pages out of a document get scrambled. I want to bame this on word and temp files but not sure. Anyone else have any ideas? It only shows up in word so far adn only after a disconnect and reconnect.
 

Read other answers
RELEVANCY SCORE 54

Hi,

Apologies if this is not the correct forum but I figured it was closest.

When I log onto one of our new Windows 2003 terminal servers I get the error message:

"Your terminal services temporary client license will expire in 6 days. Please contact your system administrator to get a permanent license"

I looked for part of the message on the net and got the following ...

The function of Terminal Server CALs in Windows Server 2003
http://support.microsoft.com/kb/822134

... which told me that the solution was:

1. Click Start, point to Administrative Tools, and then click Terminal Services Configuration.
2. Click Server Settings, and then double-click Licensing Mode.
3. Change the Licensing Mode to Per User, and then click OK.

The problem I have is that if I do that I cannot change the licensing mode as the box is greyed out (no drop down).

This problem will cause the collapse of a major system within a few days so I am asking for help as I do not know what the solution is.

Kyu
 

A:Terminal Server Licensing

The TS needs to be licensed and it doesn't think it is. Are you using this just for the admin connections (2max) or for users to logon? If its for users you need to register that box with your license server for the TS cals.

edit: this may help http://support.microsoft.com/kb/325869
 

Read other 2 answers
RELEVANCY SCORE 54

I'm trying to use a VPN connection with a remote server. I need to extract data from a server that needs this connection for security purposes. The only way to run the software on this server is to use a terminal server client connection. I'm using WIN XP, but the server is running NT 4.0 Terminal Server edition. Once I open up the terminal server connection, the VPN connection will not connect. Now, reverse logic, if I open the VPN connection first, the terminal server client connection will not work. Is there a way to have both open at the same time with the OS's I have currently? Or is there something I need to change to get this to work?
 

Read other answers
RELEVANCY SCORE 54

How do I clear the name of the previous use from the user name box when logging into a terminal server?
I want the login box to be blank when the login screen displays.
John
 

Read other answers