Over 1 million tech questions and answers.

Connecting a SATA Hard Drive in an SCSI system

Q: Connecting a SATA Hard Drive in an SCSI system

Hello, this is my first post here. I have an HP Workstation x4000 I use at work for Designing CAD Models. This is an old computer. My problem is that I am out of room on the Hard Drive. It is a 58 GB SCSI,68pin HP Hard Drive. My IT support guy purchased me a 1GB SATA Drive,Raid Card,enough Memory to fill the MEC Card, and Norton Ghost to flash over the new Drive. My problem is, the Card he bought will not fit into the Mobo. The ribbon in the Computer has an empty plug and a power plug,but they are for a 68 pin SCSI Hard Drive. Is there a cable made that I can use to simply plug the SATA Hard drive into the 68 pin ribbon,or do I need a card? Do they make such a thing? My boss is extremely frugal and doesn't want to hear that the best thing would be to replace the 12 year old computer! Thanks for any help you guys can give me

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Connecting a SATA Hard Drive in an SCSI system

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 84.4

hi my new sata hard drive is showing as a scsi in win7
and it seems to be running slow and making alot of accessing data noises
how can i fix this back to sata
thanks

A:new sata hard drive showing as scsi in win 7 help

With some hard disk controllers it is normal for it to show up as a SCSI disk - particularly if the disk controller is running in AHCI mode, which is preferrable since it allows features such as NCQ. One thing you may want to check is: locate the drive itself under "Disk Drives" in device manager and go into the properties. Select the "Policies" tab and view what is set. For better performance you will want it set to "Better Performance" with both of the boxes checked. Though if you lose power you may run into minor file corruption issues - I personally have not had issues with this. If you disable those check-boxes performance can decrease significantly.
 
-David Betournay

Read other 1 answers
RELEVANCY SCORE 83.2

Hello All,

I just got my hands on a Compaq 36.4 gb hard drive (10k RPM). It has an scsi port connector but I don't know how to connect it to my ECS board which is fairly new (one of those SLI-status boards). I might need a converter of some sort. The hard drive model is: BD0366459B , my board model is ECS 945-p ( http://www.digit-life.com/articles2/mainboard/ecs-945p-a-i945p.html ) .

Thanks ahead of time.
 

A:Hard Drive Compatibility?:confused: SCSI to IDE or SATA?

According to this site
Product Name BD0366459B
CD-ROM Drive Compaq CRD-8402B
Hard Disk Drive Compaq BD0366459B; 9.09 GB; Firmware 3B12; Wide Ultra3SCSI
BD0366459B; 145. GB; 291. GB; Firmware B005; Wide Ultra3SCSI
Host Bus Adapter Compaq Integrated Dual-Channel Wide-Ultra SCSI-3 ControllerClick to expand...

You need

(1) a SCSI-3 controller to be installed into the mobo
(2) a Wide Ultra3SCSI cable

You may get the hard disk cheap but could get rip off by the hardware needed to go with SCSI equipment.

The Sata can be viewed as a poor man's SCSI but at least your mobo support 4 units out of the box. I doubt if a SCSI can be cheaper than Sata nowadays which is being retailed at GBP 0.128 per Gb. Thus the 36.4Gb unit would cost no more than GBP 4.65 in UK which, if being a Sata disk, is equivalent to approximately one imperial gallon of petrol. That amount of money will not be able to buy either one the above two attachments required to run the unit.

Technically if you run a Sata Raid 0 to half the access time it should beat the SCSI disk performance hand down, I would have thought.
 

Read other 1 answers
RELEVANCY SCORE 83.2

I have a Dell Tower Computer (Circa 2000-2002) that runs RIP software (Raster Image Processor) used to send graphics/image data to a machine that makes by way of laser imaging our plates or masters for our offset printing presses. Monday the hard drive failed. The Dell has Windows XP license decals on it but when booting up it display Windows 2000 NT. The computer has only 1 hard drive, a 68 pin SCSI drive and the cable to it connects to separate dual channel SCSI card which is in a slot on the motherboard. There is another SCSI card (single channel) in the slot next to it which has a cable that goes to the machine that this computer drives. The software that runs on this computer is proprietary software and I have a re-install disk for it being send via UPS Next Day Air as I type. I have an XP disk & license that I can install on what ever hard drive I can get to work here and the RIP software manufacturer said their software would work on XP. But I don't have a copy of Windows 2000 NT.

My question is that if I can't find this same hard drive locally, can I use an IDE or a SATA hard drive instead and still run the RIP software correctly? There is 2 IDE (primary & secondary) connectors directly on the motherboard. One is used for the CD rom drive, the other is unused. I am not certain but I don't believe the motherboard has a SATA connection. I have 2 good spare IDE hard drives.

If I can't make plates I can't print so I need to get this reso... Read more

A:SCSI hard drive died - can i switch to ide or sata?

Read other 8 answers
RELEVANCY SCORE 83.2

SCSI vs SATA vs EIDE
What are the differences between all of these?

I'll probably not use SCSI, but I was looking at the WD raptor 10K rpm hard drive (SATA). Do you need a special motherboard or certain controller to run this hard drive? And do you need a special CABLE for it? I have tons of 80pin IDE cables, but those wouldn't work?

Thanks
 

A:HARD DRIVE question - SCSI vs SATA vs EIDE

Nope won't work. Different drives, cables, controllers. Some motherboards now come with the SATA interface built in. For more information check this site out. Its an OLD report on SATAs. Hard drives are now available for SATA use.

http://www.explosivelabs.com/articles/sata/
 

Read other 2 answers
RELEVANCY SCORE 82.8

Ok I have a external enclosure that is IDE / Sata , I have 2 hard drives I'm not using , there both SCSI 10,000 rpm Hard Drives, my question is how can I connect one of them to my external enclosure so I can connect em to my USB

A:Connecting SCSI Hard Drive to my external enclsoure?

You cannot do that. Your drive which is SCSI will not connect to an IDE/SATA controller in the external hard drive enclosure.

Read other 4 answers
RELEVANCY SCORE 76.4

I purchased a Dell Inspiron 531S desktop and wanted to move my IDE 200 MB HDD from mo old PC to the Dell.

We tried connecting the IDE HDD as an external drive but the Dell would only recognize the case and not the HDD.

The TechSpot Q & A have saved me in the past so I hope someone can give me a solution
 

A:Connecting IDE Hard Drive to SATA PC

It dosen't have any IDE connections at all? You could always try a PCI card that will allow you to use IDE drives, however be warned that it would only be like ATA66.
 

Read other 3 answers
RELEVANCY SCORE 74.8

i have 2 old hard drive's with some data in them and im trying to retrive it back to my current computer.
one of the drive's works perfectly, but when i connect the second drive it kills the cable totally.
i cant use the cable anymore.. even for the first drive.
it happend for the second time already so i figured out the hard drive is the problem..
any ideas how to fix the problem? what should i do?
 

Read other answers
RELEVANCY SCORE 74

HI there, i'm having trouble with a new hard drive i bought, it's a seagate 80gb sata, my motherboard only accepts ide connectors so i bought a controller card with sata ports connected one cable (bought seperately) to the hard drive and another through a convertor to the power. When i start up windows it recognises the raid controller, that in turn recognises the hard drive but it seems to be under a seperate interface, the normal bios does not recognise the hard drive as slave or master or at all for that matter! Have i connected it wrong or is there something i'm missing? Thanks in advance for any help!
 

A:Problem connecting Sata hard drive via controller card

Read other 7 answers
RELEVANCY SCORE 72.8

windows98 is already on my 13gb ide drive, but i have a new 9gb scsi drive which is really fast 80mb/sec,
I would like to install only windows for now so machine boots faster, can i do this and still have other files on existing slower 13gb hdd i.e. games, txt files and pics?
I have managed to make ide drive as slave but i dont know how to go abouts installing win98 on scsi, as machine keeps booting to windows, from the slave drive. And when i attempt to install win98 it tries to put it on the ide drive which alwready has it on.
Do i need to disconnect the power supply to the ide hdd?
Does scsi drives have master/slave jumper setting like the ide?

My new hdd is MAG3091LC on this page
www.fujitsu.co.jp/hypertext/hdd/drive/disk_e.html
 

A:if i have 1 ide and 1 scsi hard drive how do i install windows on the new scsi hd?

Read other 8 answers
RELEVANCY SCORE 69.6

I'm a little confused. In the course of trying to speed up my computer a little bit, I came across something interesting and puzzling. The rig is a Dell Dimension C521 with 2G ram and an AMD 64 X2 Dual Core 3800+ at 2GHz running windows Vista Business.

As you'll see below in the device manager, it tells me that I have a SCSI drive. Yet, when I take the case apart, it sure looks to me like SATA. It's got a SATA cable, etc. Unless they changed the SCSI cable, it has to be SATA. I remember SCSI cables as being fat ribbons from my Mac days (MacPlus, IIsi, PB160, etc.).

Am I going crazy, did I miss something, or is the computer going crazy.

Thanks for your sanity, Sam
 

A:Is this a SCSI drive or SATA?

find the model number of the drive on the drive unit and google for it. That might tell you if you have a scsi or sata drive.
 

Read other 2 answers
RELEVANCY SCORE 69.6

I have a Startech brand PCI add-in card to get some extra SATA ports on my old Biostar MCP 6PB M2+ board.

In Disk Manager an Hitachi drive attached to the card shows up as a SCSI device.

However my backup software doesn't see it (old copy of Norton Ghost on CD) and the POST operations do not show it in the BIOS. Win7 reports that no driver updates are needed for the Hitachi on the Startech card.

It's very confusing. A new motherboard is due for me but this problem solved would extend the use of the Biostar. Why would the Win7 see the device but nothing else?

Read other answers
RELEVANCY SCORE 68.8

I have an HP desktop computer running WIndows 7. The motherboard has an nVidia chipset. I also have 2 standard SATA hard drives and a SATA SSD drive attached. When I bring up Device Manager, all of the drives are listed as SCSI drives. Anyone know if there are any driver updates that can fix this? I'm not really worried that they are mislabeled, but the SSD is not performing well, even after the typical tweaks. In fact, one of the tweak applications can't identify the drive mode. It should either be IDE or AHCI. In any case, NOT SCSI. My BIOS doesn't have any settings to change IDE/AHCI modes, so I have been told this needs to be done through software.

Any suggestions?

A:Why does my SATA drive show up as SCSI?

Maybe the driver for the controller determines what the OS sees.
all my drives list as ATA

Read other 2 answers
RELEVANCY SCORE 68.8

Hello,

Not sure whether to put this here or programming section seen as its more of a hardware issue. Anyway, I am currently designing some software which will be able to send SCSI defined multimedia commands MMC which are defined by SCSI.

I am going to be using a SATA connected Blu-ray/DVD drive. When MMC commands are sent using IOCTL the drive should return information held on an optical disc.

The question I have is are MMC, well SCSI commands compatible for use with a SATA interface? I am unsure whether the protocols are different or not. I'll be using windows xp.

Thanks!
 

Read other answers
RELEVANCY SCORE 68

Hi there,

I am trying to install a Seagate 500GB SATA hard drive to my old DELL Dimension 4500.

I have previously installed PCI Controller Card from Masscool. I also installed and updated the driver on my old IDE hard drive.

I am not seeing an option in my BIOS to detect the hard drive.

When I get to Windows and open up My Computer it does not detect the drive but it does detect the SATA DVD drive I have installed to the controller. When I open the device manager it sees a hard drive connected but sees a SCSI drive.

Lastly when I open the program that I installed as a raid controller it does detect a SATA hard drive but it isn't allowing me to do anything with it.

Ultimately I would like to install this new hard drive and no longer use the old IDE one. I believe the next step is to access the RAID BIOS but I have no idea how. I would appreciate any help anyone could give me.

Thanks in advance,
Tom
 

A:Trying to install a SATA hard drive on an old system.

Read other 9 answers
RELEVANCY SCORE 68

I have got a system that was running xp on a sata hard drive which was cloned onto a second sata hard drive. The main hard drive started freezing on the welcome screen and so I started using the second hard drive but the same has happened to that. I could not boot in safe mode or last known good configuration etc.
I decided to format the first hard drive and put xp back on it but every time I try to do so after it has been formatted and the xp files have been loaded onto the drive when it comes to reboot in order to load the files the computer will not load the files and just starts the whole process again of setting up windows and then giving me the option of formatting etc I am just going round in circles.

Is there something special that needs to be done with a sata hard drive in order to put xp on it?
Does anybody have any idea what the initial problem was with freezing screens?
 

Read other answers
RELEVANCY SCORE 67.2

I have a problem with Sony PMB software not recocnizing my DVD RW. Sony says its because my computer see's my drive as a scsi. It is a Sony DVD RW that is hooked up with a SATA cable to mobo. The box that the DVD RW drive came in shows it as a SATA. Do i need to do something in the BIOS to correct this. Any help would be appreciated. Thanks.

A:[SOLVED] Dvd drive listed as scsi hooked up as sata.

Hi Odie, if you would be so kind as to mark this thread solved by clicking on the thread tools option at the top of this thread and selecting solved from the drop down menu. Then post this problem at the link below, our hardware techs will fix you right up. They are very adept at this sort of issue and will be happy to assist you. There are many sections to our forum so it is easy to get confused at where exactly to post a problem.

http://www.techsupportforum.com/f255/

You haven't done anything wrong, it's just that I want you to get the proper help you need. Remember to mark this thread solved before posting over there so you don't have 2 threads open at once.

Thank you,
Patmark

Read other 1 answers
RELEVANCY SCORE 67.2

Hey guys,
Ill try and keep this straight and to the point but at this point myself, intel, and dell are baffled. I have a Dell XPS730 with the Nvidia Nforce 790i chipset. I run two 500 gig SATA drives under RAID 0. I recently installed an Intel X25 80 gig SSD and have ran into problems. Windows recognizes the drive as SCSI in device manager. Granted it works however because it is listed as SCSI TRIM and the intel toolbox wont work which makes an SSD useless.

After tons of research I have found that because of the Nvidia chipset it makes the drive show up as SCSI. I have tried Vista and Windows 7, both show it as SCSI. I have moved the SATA cable away from the other main 4 that support RAID with no luck. I have refomatted several times as well with no luck. I have completely disabled RAID in the bios and it STILL shows as SCSI. Is there any way to get around this? I have read that changing the nvidia controller drivers may work but im not sure what I would switch them to? I am totally lost and any info would be MUCH appreciated!

A:SATA SSD Drive shows up as SCSI - Rediculously baffled...

Windows will do this with some Sata Controllers.

Read other 9 answers
RELEVANCY SCORE 67.2

I was just looking around and I saw a thread that indicated that it might be possible to transfer a Windows XP Pro hard drive to a new system.

I'm wondering if this is true or not because at the moment I am looking at getting new Intel D865GSA Motherboard to replace the same type of motherboard because it failed on me. I was also looking at putting in a similar processor as well. The original motherboard was an Intel D865GSA and the Processor was an Intel P4 640 processor.

That was the original hardware that was in there when I installed Windows XP on the hard drive, but due to the age of the hardware people have told me that it would be better to just upgrade the motherboard, processor and memory. I've been looking at the idea of doing that with a barebones system and I could do that, but I would need to use the hard drive that Windows XP Pro is currently installed on without any loss of actual data.

It's important that I keep whatever data is on there due to a legal case that I'm dealing with, but I don't know what will happen if I try to upgrade things so that it has a newer motherboard, processor and memory that can support Windows Vista or higher.

What can I do to make sure that I can access this drive as is without any loss of data?. I don't mind doing device drivers at all as that won't affect the data, but reinstalling XP will cause it to lose the data and at the moment I can't back it up or print it because of what happe... Read more

A:Moving Windows XP Pro Sata Hard Drive to new system

Read other 12 answers
RELEVANCY SCORE 67.2

My Win XP aro PC has two internal SATA drives. The OS is installed on drive C. Drive F is the other one, used for data

I was moving some files from drive C to Drive F and the machine crashed, giving me a delayed data write error. After that the F drive was not accessible. It either wouldn't open or I'd access denied errors.

I tried running chkdsk f:/f, which has always worked in such situations on external drives. It didn't work at first, giving me access denied errors, then I rebooted and I ran it - it didn't work the first time, I got unrecoverable sector errors.

Finally, after 3 attempts chkdsk seemed to work, but after that the Windows immediately froze. I shut it off and now it won't boot up. I get the windows splash screen then it just freezes on a blackened screen.

Please help!

A:SATA Hard Drive failure, system won't boot

I just ran the drive diagnostics from the setup screen - I get Drive I... Fail. Return Code: 7.

Read other 2 answers
RELEVANCY SCORE 67.2

I have just bought a new computer with no operating system.
AMD Athlon 64 with ASUS motherboard
200gig sata hardrive

I started an intsallation of a copy of XP professional but it asked for xp with service pack 2 which i don't have on that disc.
I reset the computer but now when i turn it on it comes up with the message 'Error loading operating system_'

I have bought a new and legal version of xp home with sp 2 but i can't get past this error message.

I think i have to somehow wipe the sata hard disc from bios but i don't know how to.

Can anyone help please

Thanks
Tim
 

A:How to wipe a sata hard drive without an ooerating system

2 ways you can do this...
1) Travel to bootdisk and DLoad a WinME bootdisk if you have web acess on another machine. Extract the zip to a floppy, then boot up in the new machine...
At the A: prompt type format C: and hit enter. This will prepare the drive for an OS When it is finished remove the floppy and re-boot with the XP CD in and you will now be able to run setup.
2) Determine who's SATA drive and go to the manuf. site and DLoad their HDD utility. This will also prepare the drive and you should be good to go.

patio.
 

Read other 2 answers
RELEVANCY SCORE 66.8

Have a W540 with the Samsung MZ7TE512HMHP-0001L SATA Solid State drive.  Noticed after one of the updates from either MS or Lenovo, the driver changed to a SCSI driver, and the performance has slowed.  It now shows a 6.3 on the windows experience, vs the 7.6 it did before.  I haven't seen a SCSI drive in years and doubt that is what is rockin in this workstation. Things I have tried:1. Update driver (says I have the correct driver)2. Run Lenovo Support utilites Suggestions welcome

























Samsung SCSI.jpg ?118 KB

Read other answers
RELEVANCY SCORE 66.8

Hi! I currently got a new system with Windows 7 after my old XP system died, Since I cant boot up the old system I was wondering if I could install the old C-drive from it into my new(Win 7) system if so, would I have to have a dual boot option or would it recognize it as a Hard-drive and allow me to access it through Win7?

So in a nutshell can I take a hard-drive from a Winxp system and throw it in my new systems drive bay and without doing anything have it recognize it or will I have to go into BIOS?

I was going to plug-n-pray but I figured I'd enlist some help from some Techies namely anyone who can answer/help me

Thanks so much for anyone whom can help
 

A:Installing a WindowsXP Sata hard drive onto a new Win7 system?

It will just recognize it as a hard drive. For it to work in a dual boot setup you will have to install XP after the hard drive is installed in the computer.
 

Read other 3 answers
RELEVANCY SCORE 66

I am wondering if I can access files on a SATA or IDE hard drive installed in a desktop computer with no other hard drive installed. Meaning, the drive I am trying to access isn't configured with drivers for the desktop's other hardware or motherboard. There is no other drive installed in the desktop. I was wanting to know if I could use a boot CD (Hiren's or Linux) to use as way to access files, pics, etc. and transfer it to a usb flash drive. Any help would be greatly appreciated.
 

A:Solved: Can I access data from a SATA or IDE hard drive on a system it's not configur

Read other 8 answers
RELEVANCY SCORE 63.6

Computer: Dell Dimension 5100. 6 years old.
Current hard drive: SATA 250GB (think it's SATA 1). Dell web site says its ATA-133

Looking to: Replace the hard drive due to faults

Question: Can I fit a SATA 3 hard drive in this computer? Would this just work at SATA 1 speeds because of the old mainboard? Most of the hard drives listed for sale are now SATA 3.

Thanks for any replies.
 

A:Solved: SATA 3 hard drive to replace a SATA 1 hard drive?

Read other 11 answers
RELEVANCY SCORE 62.4

My computer is not recognizing my SCSI 70 ghz drive. It keeps saying PXE-E61 failure check cable. It worked fine last night, I reformatted my secondary IDE 40 ghz drive and I could not get my computer to start. I had to disconnect my SCSI drive and setup windows xp on my IDE 40 ghz drive to get my computer to start. It still doesn't recognize my SCSI drive. I need help.
 

A:SCSI 70 ghz hard drive

This generally pertains to a bad hard drive or bad hdd cable same as a "non system disk error" with same solutions.
http://www.computerhope.com/issues/ch000229.htm
 

Read other 2 answers
RELEVANCY SCORE 62.4

Hi,

I have a Dell Poweredge SP5166-2 that uses Seagate Barracuda (4.3gb) hard drives put into trays that are slid into the computer and connected to the motherboard. I want to put another hard drive in but it is an HP C2490A (2.1gb). When trying to install it the first times, bios recognizes it and says it is working properly, but it is not displayed under Win2k's logical devices or my computer. It is however displayed under device manager. So, it does exist but I just can't make it work within my computer. I also tried to make connect the SCSI bus cable that goes into the cd rom into the hard drive, but no luck. Is there any master slave config for scsi devices? My understanding is that there aren't any; only scsi ids. Any help is greatly appreciated. Thanks in advance.

Louis
 

A:HP SCSI Hard Drive

Hi,

You can check couple of things.

You may want to check SCSI ID(which usually a jumper or switch on the drive.).

If you want the drive to be C:, check host adaptor which ID is bootable.

Make sure you have a terminator at the end of the chain.

Go device manager and check if your SCSI card has conflict with other devices.

Good Luck,

TJ
 

Read other 1 answers
RELEVANCY SCORE 62.4

Hi,

I've just bought some hard drives.
They weren't expensive, i got them in a clearance sale, they are SCSI types.

One of my PCs uses an SCSI hard drive as its local drive 'C',
However this PC has a power supply feed to the SCSI hard drive, and also the
SCSI connector ribbon cable.
Thats two separate cables.
One for signal, and one for supply.

The SCSI hard drives i bought have no feed point for a power supply.

So i don't know how to try them.
They must use some supply to operate, so could it come via the SCSI cable ?
I suppose it must come from there ... ?

Ive never seen ones like this before.

I dont want to try them without checking first.
Any comments or suggestions would be welcome.

Model: WDE18300-6029A8
Made: 26th May 1999

I got eight in all, some like this one, and some others.
Now i'm a bit worried about trying them, as they might try to draw more current
from the SCSI signal wires than they were meant to give.
These ones come in a sort of Slot-in carrier, what difference that might make
i don't know.

Cheers, John
 

A:Some help please in trying to use an SCSI hard drive.

Read other 14 answers
RELEVANCY SCORE 62.4

ok i posted eariler and its final the scsi seagate is mine and it looks like im keeping it.ok so i bid on the scsi control card thats ldv and now im looking for a cable . my question does the cable need only one terminator? im new to this so if anyone can help me out on installing a scsi hd it would be greatly appreciated
 

A:scsi hard drive?

You want a 68pin internal LVD cable, it should either have a terminator built in + two connectors (one for the SCSI card, one for the hard disk), or three connectors + you'll need to plug a terminator into it. The devices should be arranged with the SCSI card at one end, the hard disk in the middle and the terminator at the other end. The SCSI card provides termination for its own end (unless you want to put the SCSI card on the middle of the cable, in which case you need a terminator for each end). The terminator must be LVD or LVD/SE compliant.
 

Read other 3 answers
RELEVANCY SCORE 62.4

Hi everyone,
I wonder if anyone have a good site where it can guide me on how to installed a second SCSi hard drive. I have a HP tc2120 server with one 36.4 Gb drive. I have anotherone just like that. But I never have installed and SCSI drive. I have only done the regular IDE drives. I need some help.

thanks,

AMD2800
 

A:SCSI HArd drive

Read other 9 answers
RELEVANCY SCORE 62.4

Hi,

I've got an old computer that we've just been using at the office for payroll and a few other things. The problem is its runningout of hard drive space, so I was just going to install another hard drive, but I forgot that it has a scsi hard drive. I was wondering if i could hook a regular hard drive up to the scsi cable? Any help will be greatly appreciated.

Thanks
 

A:SCSI Hard Drive

No.
 

Read other 3 answers
RELEVANCY SCORE 62.4

Built a WinNT 4.0 server using SCSI raid array. Works fine. Enabled atapi in services and it sees the IDE CD-ROM (master, secondary channel) just fine.

But it won't see the IDE HD (master, primary channel)!

Jumpers, cables, HD all okay.

I'm sure I'm missing something obvious. Anyone have a clue?

Thanks,

Jim
 

A:scsi NT -- how to add IDE hard drive?

Greetings

Can your BIOS see the HD? If not, then your OS has no chance of ever seeing it.

Have you tried it as a Slave on the secondary controller? Or better yet, keep it as a master, and make your CD-ROM the slave on the secondary controller.

You could have a dead primary controller (I know my secondary controller is not functioning... damn, I need a new PC - who wants to help me raise funds for a new PC - any compnay that helps will get free advertising from me ), or a dead HD.

There could be something else wrong, but I am not that great with hardware issues. If you want, I can move this to the Hardware forum.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

Read other 2 answers
RELEVANCY SCORE 62.4

Whenever I boot up my old computer, I get a message during bootup that tells me that the SCSI boot device is not installed. I have a SCSI hard drive connected to an Adaptec SCSI pci card. I had just taken the hard drive and card out of that computer and tried to install them on this computer, and it didnt work, so I put it back. I tried running a SCSI utility on the bootup screen, and it didnt even recognise the existance of the hard drive. It wont let me format or anything. If there is something I can do to get it working, then please post. I do not care if the solution requires reformatting, because I do not have any really crucial data on the drive.
 

A:SCSI Hard Drive

Read other 9 answers
RELEVANCY SCORE 62.4

I was able to salvage an old system from the trash at work. It has a Western Digital 4.3GB SCSI hard drive and I want to know if i can use it in a non-scsi system. To use it will I have to use a SCSI adapter or have to have all HD's as scsi?
 

A:Using SCSI Hard Drive

You can use it if you have a SCSI adapter and you can mix IDE and SCSI in the same PC.
 

Read other 1 answers
RELEVANCY SCORE 62

OK you SCSI experts, I've got a question for you. First, the particulars of my computer:

Dell OptiPlex GX110, 733mhz Pentium III, 256 Mb RAM, Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller with a maximum data transfer rate of 40 mb/sec., Boot drive is a SCSI IBM DCHS04W (4.50 GB) 7200 rpm with maximum data transfer rate of 40 mb/sec. and average read seek time of 7.5 ms.

Now, I just purchased a Fujitsu 18.2 GB, 10,000 rpm, SCSI hard drive, with a maximum data transfer rate of 80 mb/sec. and average read seek time of 4.7 ms.

My question: Will I benefit from the speed and efficiency of the Fujitsu drive by making it the boot drive?

I know that my SCSI controller card will limit the maximum data transfer rate to 40 mb/sec., despite the 80 mb/sec. rating of the Fujitsu, however, will the 10,000 rpm and the low average read seek time of the Fujitsu overcome the limitations of my SCSI controller card to the point that I should make the Fujitsu my boot drive? Thanks in advance for any assistance.
 

A:SCSI hard drive question

I will tell you this... going from 5400rpm to 7200rpm spindle speed makes a major difference. So going from 7200 to 10000 will make a difference.

For me, the decision would be easy. I would put the fujitsu as my boot drive.

It's a bigger drive and it's has better access times.
 

Read other 3 answers
RELEVANCY SCORE 62

I am helping my brother in law out trying to do a non destructive repair using the installation disc. When we went through all the steps and got to the section that shows the hard drives it does not recognize the hard drive and won't let us do a repair. If we wanted to do a clean install it still would not recognize the hdd.
I decided to check bios and see what was recognized and in the hdd section it showed that the hdd was a SCSI. It is not a SCSI drive. We checked PC Wizard 2008 and it showed SCSI. All the places show that it is a SCSI. What is causing this? It is not a SCSI drive but a SATA drive. Can anyone tell me what has happened?
 

A:Hard drive recognized as SCSI

it is SCSI emulation. Some USB drives show up this way too.
 

Read other 4 answers
RELEVANCY SCORE 62

Does anyone know of a website that I would be able to find the drivers for a scsi hard drive? I have been searching for what seems like weeks now and can't seem to find anything.

A:SCSI Hard Drive Driver?

The driver you probably need is not for the SCSI "drive" itself. It's for the SCSI "host adapter" to which the drive is attached.

Please give brand/model specifics of your machine... laptop or desktop (probably) and type/model/details, SCSI drive (internal or external), SCSI host adapter to which the drive is cable-connected.

thanks.

Read other 5 answers
RELEVANCY SCORE 62

I have a SCSI Hard disk, that i some how messed up by transfering it to a different controller, cuz i didn't know that you can't do that, i do now. i tried to get it to come back alive, by puting it back on the controller, but my master partion table thing got messed up, when i had tried to use it on the other controller, the first controller was a LSI Logic, and the second was an Adaptec 2490-UW. so i tried to use diskprobe to read the sectors and set it up like that, which failed. i thought it might have something to do with the board so i had taken that off, but now when i go into the Adaptec "SCSI-Select" program it doesn't show a size. could i have connected my board back up the wrong way?? it does still spin up, but i don't understand why it lost the size of the disk. it had the size before btw. it is a 18.2 GB 10K RPM SCSI-2 drive, and i have 2 other identicals if they may be of any help. but i really want to know if this drive is toast.
EDIT:: COMPAQ Model #: bd018734a4
 

Read other answers
RELEVANCY SCORE 62

hello,

im going to setup a IBM Xseries 235 server in my home soon. I bought several drives. I noticed that one of the drives i bought is a scsi drive that runs at 7200k and the other drives run at 10000k. i bought two 7200k hard drives and 4 10000k hard drives. the server only supports raid 1. Would it be okay to create 3 raids. My computer supports up to six scsi hard drives. Can i create a raid with two 10000k hard drives to host my operating system and a little data, a second raid for my web server data and the third raid for my 7200k hard drives for ...idk, music.?

does that sound like it would work. would the 7200k hard drives slow down my computer?
is it possible to create 3 raids on a single server?
 

A:7200rpm scsi hard drive

bump
 

Read other 1 answers
RELEVANCY SCORE 62

I have a Win2k3 Small Business Server being ran with RAID on 4 hard drives.
1 hard drive just got failed and i replaced it with the "same looking" hard drive.
When i plug in the new hard drive i noticed that it does not match up to the others in size and its not meeting the requirements in size to rebuild.

When i looked closer at the hard drive i noticed the following difference from the other 3 working hard drive and the 1 damaged one:

Part: 9v8006-001
Firmware: e302

The model and brand are the same exact settings but non the 2 noted pieces of information. Do you think this could cause a problem if this 1 hard drive was different from the others?

Just wondering because i never had this happen to a SCSI drive on RAID settings, and yes its set to be auto hot swappable and ready to rebuild RAID - its just not working because of the size..........so it says.
 

A:SCSI Hard Drive Question

You should be able to use it. If that hard drive is slower then the other, it will slow them all down to match it, and your hard drives will only use as much space as is in the smallest drive. That is the way it works with conventional hard drives anyway. I would back up your data if possible first before you try it (if you haven't already), just in case.
 

Read other 1 answers
RELEVANCY SCORE 61.6

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

A:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

Read other 1 answers
RELEVANCY SCORE 61.6

Hi,

We have a PC here with a fried motherboard and the replacement is going to take a few days to arrive. In the meantime, we desperately need to get the userís data off the hard drives. (Sodís law Ė the user hasnít been backing up and the data is essential.)

This PC is the only one we have with SATA hard drives. Iíve bought a Q-Tec 350SA Serial ATA PCI Card. Apparently (in theory) if I fit this to another PC (with IDE) I can then plug the SATA drives in and backup the data on them. If I can do this, at least I can then set the user up on a spare PC until his new mobo arrives.

Iím just a bit nervous about actually doing this. Iíve never done anything more complicated than swapping hard drives or installing RAM and graphics cards and the like. Iíve hooked up laptop hard drives to desktops to remove data, but that was straightforward Ė plug Ďem in via an adaptor cable and they worked straight away.

The guy in the shop I bought the card from said that it should work fine, it shouldnít damage the hard drive or any of the data on itÖ but he wasnít 100% sure. He said itíll work great for connecting a brand new SATA drive to another PC, but wasnít completely sure about connecting an existing drive from another PC to remove the data. Iíve contacted Q-Tec via email but their standard response time is 48 hours, I canít find a telephone number to call and ask them, and the user is desperate to get this data off a.s.a.p.

So, should this be a straightforward process... Read more

A:Connecting SATA hard drives to existing IDE PC...?

It should be very easy. First install the sata card into the working system. Install the drivers and make sure the device is installed correctly in device manager. Next shutdown and connect the drive. Note you will need a power adapter for the drive since sata and ide use different power plugs. The one exception to this is a WD drive; it has both power plugs on the back of the drive. If it is one of these, DO NOT use both plugs. Just install one power plug.

Once the drive is installed and power is connected to it, restart the system. You should see the drive in explorer / my computer; copy whatever you want.

The only problem you might have is some bios [ami] like to reset the boot device. If you have a problem, enter the bios and make sure the system still is set to boot from the original ide drive.
 

Read other 1 answers
RELEVANCY SCORE 61.6

I want to transfer data from my hard drive in my laptop (Lenovo Y480) to a hard drive in my desktop. the cables for the sata adapter do not fit the hard drive from the laptop. Is there a different form for a 2.5 hard drive and a 3.5 hard drive?
 

A:sata to usb adapter cable dosen't fit sata hard drive in laptop?

Does the drive have an adapter need to remove to expose the SATA conenctors? I don;t see anything about the Y480 not having a standard SATA drive and laptop and desktop SATA connectors are the same.

Maybe post pictures of both the drive and your SATA cables.
 

Read other 2 answers
RELEVANCY SCORE 61.6

I have to replace my original hdd on my 9 year old Dell XPS 8100. The desktop  has an i7 chip so I'd hate to replace it with a new i7 PC because they are expensive.The bad drive is an esata drive. I notice that current crop of hdd's seem to be sata III drives. Will the old Dell PC mother board  on the desktop support the new sata III drivesIf I replace the bad hard drive would I be able to restore the W7 OS and all my data by using a macriumbackup file on the desktops external  backup drive?
Thanks for your help!

A:Can old oem sata hard drive be replaced with a new current generation sata III hdd on an 8 year old xps 8100 with an i7 chip??

Any 3.5" SATA drive will work.
As long as the system is in working order, and you purchase a SATA data cable for the additional drive, you should have no trouble cloning the existing drive to a new one.

Read other 2 answers
RELEVANCY SCORE 61.2

I am about to build my own PC. It will have a Maxtor Sata hard drive. When you are installing Windows XP Pro, do you have to press F6 and install a third-party driver? I was reading this book, and the guy said to do that. I have never heard about that before. Can you just hit install XP and let it do everything? Thanks.
 

A:Installing Windows Hard Drive SCSI

Yes you need to hit F6 to install a RAID driver. You will be able to get that driver from the motherboard manufacturers website in most cases. The resulting RAID driver that you get will need to be on a floppy, so if you were planning on not putting a floppy in the computer you were building (like many do), you will have to at least have a floppy during the setup process of Windows. Sorry, theres no magic "hit install XP and let it do everything"
 

Read other 5 answers
RELEVANCY SCORE 61.2

How do I get Windows XP Pro to duel boot from a second scsi hard drive. First scsi hard drive has Windows ME and works fine.
Second scsi hard drive has Windows XP pro but only works when I change the scsi ID from 1 to 0. But then the other scsi hard drive is not reconized in windows explore. However, it is reconconized in the XP disk manager and everthing else appears normal excapt that the drive is not read in explorer. Any help PLEASE
 

A:Duel Boot XP on second scsi hard drive

Was XP installed with both HDs in the machine, and with Me installed first? If you installed XP with only its HD in the system (so it was 0 when you installed it), the XP boot files are on the wrong hard drive. They need to be on the system's primary partition, which should be C: (where Me should be now if this is going to work right and properly dual-boot) and the ARC path in your boot.ini file is referencing the wrong disk for the XP startup to look on to boot XP when you have both disks set up.

Please post the contents of your boot.ini file here, and we will take a look.
 

Read other 1 answers