Over 1 million tech questions and answers.

BSOD in normal mode but not in safe or safe w/networking

Q: BSOD in normal mode but not in safe or safe w/networking

Just recently started to get BSOD in normal mode, error was registry error. Systems run fine in safe and safe w/networking. I have run chkdsk, anti-malware, CCleaner to fix registry issues, and have not detected any virus. I am lost. Can you help me?
Thank you

Read other answers
RELEVANCY SCORE 200
Preferred Solution: BSOD in normal mode but not in safe or safe w/networking

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 130.8

Alright this is a family's laptop that is about 5 or even more years old...has windows xp on it dont know the exact one -.-...alright.

My sister has been using it and says she has never done anything to it...which i dont believe but anyways this computer will not boot up what so ever...everytime you power it on it goes to the screen that says unexpected error software/hardware problem yada yada yada...and then it gives you the options of boot in safe mode, safe mode networking, safe mode command prompt, last known good configuration...and none of those will work...we do have the recovery disks to wipe it but are trying to find a better way if possible...and when you try to load into any of the safe mode choices it stops at multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\System32\Drivers\Mup.sys...will stay at that for about 5-10 mins and then just turn off...if you try to just do normal mode or last known configuration it just acts like it loads with the windows and the little green loading bar then shuts off...the more i type the more i think the harddrive is toast but im new and learning so i probably could be wrong. Just looking for suggestions =)

Oh and this pc will run very hot...so if its a hardware issue i would not be surprised.
 

A:HP Pavilion will not boot in safe, safe w/networking, safe command or in normal mode

I'm heading to work now ill be back later tonight so just post suggestions and i will try them. =)
 

Read other 11 answers
RELEVANCY SCORE 118.4

Can't boot into Normal/Safe Mode with Networking, only safe mode...
Good Evening,I could do with some pointers on resolving an issue. I can only boot into windows in safe mode in Windows 10. Normal mode and safe mode with networking doesn't work. The problem occurred after a windows update. I have removed the latest updates that were installed and cleared any pending ones but it still won't boot properly. I have also run the troubleshooter and tried to recovery to an earlier date which also doesn't work.The laptop is a HP ENVY 17 notebook. At boot it just gets to the HP logo with the circular loading icon and no further and can only boot it into safe mode. Can anyone recommend the next steps? I have also tried the following;stopping startup items
uninstalling hardware drivers
removing recent software
running troubleshooters at boot
sfc scan
diagnostic/selective startups with minimal services running
Would the fact that I cant boot into Safe Mode with Networking imply its a network driver related issue?Bit of a dead end really, any help would be much appreciatedKind regardsTrevor
 

A:Can't boot into Normal/Safe Mode with Networking, only safe mode...

It's uncertain what the problem is - although a networking problem does sound likely.
Start with trying a clean boot:
Perform a Clean Boot:  http://www.thewindowsclub.com/what-is-clean-boot-state-in-windows
If that stops the problem, then re-enable things a few at a time until you figure out what's causing it.
Then uninstall the problem program (from Start...Settings...Apps...Apps & Features - if you don't find it there, check the right sidebar for Programs and Features and see if you can remove it from there).
 
Let us know what happens there and we'll move on from there if needed.

Read other 1 answers
RELEVANCY SCORE 109.2

Hello, I'm hoping someone would be able to help me resolve this so that I can avoid having to reinstall Windows. Here's the situation: my laptop suddenly cannot boot up anymore; it usually hangs when the "Please wait..." dialog shows up with the text "Windows is starting up...", but sometimes it goes as far as the login prompt, then hangs after I enter my credentials and press Enter. When it hangs I cannot even move my mouse cursor. I can only think of two things I did out of the ordinary that created this mess:
I installed the driver for the Turtle Beach AudioAdvantage Micro USB stick audio card before my PC started hanging. However, after I installed the driver I was forced to reboot, and my computer rebooted just fine.
I closed my laptop's lid to put it in sleep mode while MyDefrag (formerly JkDefrag) was running. I have done this in the past without any issues, but this time when I exited sleep mode my computer was hanging, so I forced a reboot. This trouble started after I rebooted.

I am able to boot up in Safe Mode, but not Safe Mode with Networking, which leads me to think that maybe some network related drivers got corrupted. Some more info on my setup:
I have Windows XP Pro SP3 installed (v5.1.2600)
I have Avira AntiVir and Comodo Firewall installed
I am not using Hibernation
Audio: SigmaTel STAC9751
Graphics: Intel 945 GMS
Chipset: Mobile Intel 945 GMS Express
Netcard: Realtek RTL8101L
Wifi: Intel PRO/wireless 3945

Update 1: ... Read more

Read other answers
RELEVANCY SCORE 109.2

Hi
 
I am looking for help 
 
My windows 7 start in normal mode is very slow.  System is in a loop or is hanging waiting for the hard disk to be free.  The hard disk indicator light is on  all the time ... 
When I start the system in safe mode with networking, the system is fine and nothing is holding the hard disk anymore.
 
I ran minitoolbox and got the following error indications 
 
MiniToolBox by Farbar  Version: 20-06-2014
Ran by Toshiba (administrator) on 21-06-2014 at 22:59:54
Running from "C:\Users\Toshiba\Downloads"
Microsoft Windows 7 Home Premium  Service Pack 1 (X64)
Boot Mode: Network
***************************************************************************
 
========================= Devices: ================================
 
Name: Security Processor Loader Driver
Description: Security Processor Loader Driver
Class Guid: {8ECC055D-047F-11D1-A537-0000F8753ED1}
Manufacturer: 
Service: spldr
Problem: : This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)
Resolution: The device is installed incorrectly. The problem could be a hardware failure, or a new driver might be needed.
Devices stay in this state if they have been prepared for removal.
After you remove the device, this error disappears.Remove the device, and this error should be resolved.
 
Name: Microsoft Teredo Tunneling Adapter
Description: Microsoft Teredo Tunneling Adapt... Read more

A:Windows 7 very slow in normal mode, runs fine in safe mode with networking

Could have crap ton of stuff starting up with windows.
perhaps corupt driver or installed the wrong driver.

Read other 2 answers
RELEVANCY SCORE 109.2

I have tried to run IE7 in normal mode and I always get a "The address is not valid" window. I have a good internet connection and Firefox works flawlessly. I do not have connection problems. If I ran IE7 in Safe Mode with Networking, I can bring up webpages with no problems. I thought that upgrading to IE8 would cure the problem but I am still getting the exact same problem. I have tried checking many things and have tried many suggestions that I have found through web searches but nothing works. Please help!

A:Internet Explorer will work in Safe Mode with Networking but not in normal mode

what firewall do you have

Read other 1 answers
RELEVANCY SCORE 108.4

Hi ,

I'm using windows7 32-bit operating system. I have internet explorer 8( it never worked since installation, always shows "No network connection") and Google chrome installed in my computer. I had been using Google chrome which crashed yesterday. I re-installed Chrome and now it says there is no internet connection. In short, I cannot use internet in my computer. Any other browser installed comes up showing the same "No Network connectivity" thing. And then I started the computer in "safe mode with networking" and I could use see that both Google chrome and Internet explorer are working. But they do not work in normal mode. I really don't know what to do to solve this problem. And internet is working as I'm using internet in my mobile using WIFI from the same internet connection.

Thanks you,
Kavitha

A:Browsers working in safe mode with networking but not in normal mode

Hi and welcome to SevenForums,
Work you way down this list,
Troubleshooting for win-7,
http://www.sevenforums.com/tutorials/220165-troubleshooting-steps-windows-7-a.html
Post which Security suite you have installed as well,
Cheers.

Read other 9 answers
RELEVANCY SCORE 108.4

Hi! I'm just a new here, hope someone can help and give advice here. (Sorry if this is not the right thread to start my topic)

Scenario: (this is my first time to encounter this problem)

While playing facebook games last monday, my computer get BSOD and restarts. After booting up on windows, I found out that my internet connection was gone.I tried to restart but still no connection. I use my laptop and other PC to checked if there's internet and yes they are still connected. I restart my pc again and found out after boot up a message box appear says "No AMD graphics driver is installed, or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your amd hardware"

I did uninstall / install my driver but the message box still prompting after restart.
Still no internet connection.

Anyone experience this?
Sorry for my bad english.

Specs:
Intel i3 2120
Asrock H61 U3S3
Sapphire 7770 OC Edition
500 WD Blue
4GB Geil DDR3 1333mhz
550w Hec Cougar 80

A:No internet in normal mode but works in safe mode with networking

The first thing i would do is stay in safe mode and run a virus scan.

-edit-
Also check for a system restore point.

Use your Install DVD. When on the install now screen choose repair in the left side of screen. Select your OS. Then When at the GUI select system restore. Choose a date before all this happened.

Read other 9 answers
RELEVANCY SCORE 108.4

Hi guys, I'm new to the forum and really hoping you can help me :)

My internet has not been working on my laptop, which happened very suddenly 2-3 days ago. The connection is fine on my other computer and phone, so I know its not the internet itself. Even on the laptop, it SAYS the wifi is connected, but its not working. Firefox was instantly crashing, it wouldn't even bring up the browser window. Chrome gives me a "DNS address not found" error for every site I try and IE wont load anything.

I've tried flushing my DNS, using that ipconfig /refresh and /renew thing. I've tried troubleshooting the wifi connection, disabling/enabling it. I ran a Malware Bytes scan and only found a couple of "pup" programs/cookies that have been deleted. Currently running a SuperAntiSpyware scan.

The thing is, I tried using the internet in Safe Mode with Networking and it works just fine! So that means a program or something on my computer is causing it, right? There were issues with my Teredo Tunneling Psuedo-Interface driver the other day, it had a yellow triangle with an exclamation mark, but I did a couple of fixes that I found on help sites and that exclamation is gone now.

Please help, I really want to use my laptop on the internet again ;_;

Oh, and the specs for my comp are:
Lenovo Win7 PC
Intel(R) Core(TM) i5-2410M CPU @ 2.30 GHz
RAM: 6 GB
Windows 7 - 64 bit operating system

A:Internet works in safe mode w/ networking but not normal mode

In Network and Sharing Center, there is a wizard to troubleshoot connection problems. If that doesn't work, you could "set up a new connection".

Read other 3 answers
RELEVANCY SCORE 107.6

I am working on a computer now that is failing to get online in normal mode. It can get online in safe mode.

I have run and updated adware, ran hijack this, ran Spybot SD, and ran Stinger. Mutliple times for all and now everything checks out like it should. I also deleted several folders that were spy/ad ware. Everything is functioning as it should.

I have also run the msconfig in normal mode to eliminate unnecessary startup items in normal mode and between the normal and safe mode w/ networking, all the processes match up. I have gotten it down to 17 processes in normal mode. Was originally at 75+. Both are now the same in safe mode w/ networking as well as normal mode, 16 running processes.

I have run ipconfig and pulled a valid network address. I have also done a /release and /renew, gotten the same IP, and cannot get online in normal mode.

TCP/IP settings in IE is correct. I have also gone under the Advanced section of IE tools and restored default. No go. I have also deleted the 1394 connection, restarted and it was auto-added to the computer and is functioning properly. Same for the network adapter.

Can anyone give me some ideas on what else I could check to try and get online? I have also downloaded and installed Firefox with no positive results.

Everything within the Device Manager is functioning properly. The system is XP Home SP1. I am thinking about upgrading to SP2, but really dont want to do that as I doubt it will help.

Also, I have run the WinSock XP fix... Read more

A:Can only get online in Safe mode w/ networking, not normal mode

Read other 10 answers
RELEVANCY SCORE 107.6

Hello all,

I am having trouble with my fiance's laptop computer with Windows XP Home SP2. I am not able to establish a connection to the internet so I cannot run any of the online scanning tools, however I scanned and cleaned the computer in safe mode with Spybot S&D which was installed on the computer. I tried to download and install via jump drive AVG Free 8 and a current version of SpybotS&D. Unfortunately the installations failed due to the lack of internet connection. I ran Hijackthis and saved this log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:48:52 PM, on 7/15/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Safe mode

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Documents and Settings\Administrator\Desktop\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://ie.redirect.hp.com/svs/rdr?TY...lion&pf=laptop
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://ie.redirect.hp.com/svs/rdr?TY...lion&pf=laptop
R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://bfirst.info/in.cgi?2&key=mobile+home+refinace
O2 - BHO: AcroIEHlprObj Class - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Prog... Read more

A:Cannot start in normal mode or safe mode w/ networking.

Hello skate2him and welcome,

While I see the many infections present on the system, I'd prefer to see a more comprehensive set of logs before I begin.

As noted in the final step (Step 5) of our sticky topic IMPORTANT - Read This Before Posting For Malware Removal Help....

Download Deckard's System Scanner (DSS) to usb stick and transfer it to the Desktop of the infected computer.

What DSS will do:create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review.
DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt in your next reply.
Please attach extra.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste th... Read more

Read other 19 answers
RELEVANCY SCORE 107.6

Hi,

My OS is Vista.I am finding problem in accessing net.My net works fine in safe mode with networking and not in normal mode.Please can anyone help me?Do i need to turn ON any service?

Thanks in advance.

A:Net is working with safe mode with networking but not in normal mode..why?

Hi, it could be that something is stopping or preventing your internet connection. You see when your pc boots in normal mode it loads everything and I mean everything. Whereas in safemode + networking it only loads the process and services needed to work or use the machine.

The first thing I would like you to do is go to device manager, hold windows key and press R
then type devmgmt.msc now a window will be displayed and click continue, then expand network adapters, write down what you have installed in your machine and try downloading the latest version.

The other thing you can do is go to msconfig, by holding the windows key located in between ctrl and alt, and press r on the keyboard. Then type msconfig, then go to startup and uncheck everything, click apply and restart. Now if you Internet works it means that there is something loading which is not good or is causing a conflict.

We also want to cancel out Malware so make sure your pc had anantivirus and antispyware and you scan your pc full. Also go to microsoft update and make sure you have the latest updates.

Thanks

Read other 1 answers
RELEVANCY SCORE 106.8

Hey people, I hope you can lend me a hand.

As the title suggest, I've got a problem with the internet. I found a similar thread in which the problem was found to be Norton, so I followed the steps and removed it using the remover tool but it was to no avail.

I have also looked at the processes on msconfig in safe mode and applied them in normal but this wasn't successful. I also read it could be a problem with the IPSEC Services, which I have now disabled but the problem persists.

Just wondering if you had any ideas and if I need to post any screenies etc.

Cheers,
Rupert

A:Internet Fail in normal, fine in safe mode with networking

Just to be sure,
this is what you did
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
and the computer did not work properly.

Read other 9 answers
RELEVANCY SCORE 106.8

I'm not sure what is going on. I haven't tried much but I'm not very good with BSODs.

Minidump is going to be posted and so is msinfo32...

Help is vastly appreciated.

One attachment is a minidump other is msinfo32.

Edit : A little more info, this happens after typing in my password to boot to desktop. Pool Corruption shows up in one of the minidumps, but not this one or the other two. I think it has to do with drivers but I'm not certain.

A:Computer BSODs in Normal, Fine in Safe Mode+Networking

If I posted something wrong please let me know. I didn't see the post about that other program to run till i had already posted. Regardless it wont let me run it. D:

Read other 2 answers
RELEVANCY SCORE 103.6

Hi,My Computer which has Win Xp Sp3 is behaving like it is in safe mode , eventhough it is in normal mode .I noticed this because ,1. Avira Antivir Guard and Update cannot be launched bcz Scheduler is not running.2 . I tried to start scheduler ( under services.msc ) , but can't start it bcz of error 1084 ( safe mode situation ) .3 . I can't use Windows Update , bcz of error Error number: 0x8007043C ( same safe mode condition )4 . I ensured that BITS was set to automatic , but it can't run bcz of 1084 error.I have scanned with Malwarebytes, Spybot S&D , SuperAnti Spyware ( in real safe mode) - No DetectionHere is the dds log ,DDS (Ver_09-09-24.01) - NTFSx86 NETWORK Run by Administrator at 16:45:23.03 on Mon 09/28/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_12Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.510.112 [GMT 5.5:30]AV: ZoneAlarm Security Suite Antivirus *On-access scanning disabled* (Outdated) {5D467B10-818C-4CAB-9FF7-6893B5B8F3CF}AV: AntiVir Desktop *On-access scanning enabled* (Outdated) {AD166499-45F9-482A-A743-FDD3350758C7}FW: ZoneAlarm Security Suite Firewall *enabled* {829BDA32-94B3-44F4-8446-F8FCFF809F8B}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\system32\svchost.exe -k netsvcsC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Avira\AntiVir Desktop�... Read more

A:Safe Mode Error, WinXpSp3 behaves like it is in safe mode even in normal mode

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 102.8

I'm new here and in hopes of getting this resolved. I just installed the new Norton Systemworks 2005 and rebooted after installation. When the boot screen got up to the blue screen with the Windows XP logo before displaying the login names where you put in your password, it just stops. I restarted a few times and waiting a few more times thinking it may need to 'finish' installing. But each time gave the same results. Finally, I went in with 'Safe Mode' and got in with no problems. Tried again in normal mode after looking around for any obvious problems (none found)... back to square one. Tried again in 'Safe Mode with Networking' and it failed like normal mode so I suspected a networking problem??? The last thing I tried which made me mad is that I tried to uninstall Norton Systemworks in 'Safe Mode' and that failed!! Anyone in these forums know the cure? :dead:
 

A:Unable to get to login screen, works in Safe Mode but in Safe Mode w/ Networking

Just a thought

Safe-Mode
Start \ Run \ msconfig \ diagnostic startup
disable any services attached to your most recent install and restart
should get warning next boot about using msconfig, its ok
One key service that needs to be available is the installer service
Try the uninstall, if doesn't complete
Try the uninstall string in the registry only if you know what you are doing

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Under it you will see a list of installed programs. Some don?t show up as words but you can figure out what they are by looking at their values. What you are looking for is the uninstall string. Double click that key as if you were going to modify its value. Do a CTRL + C to copy and then exit the registry editor.

Go to START \ RUN and paste the uninstall sting and hit enter. This should launch the uninstall.

Just a thought though as I am not infront of a test system at the moment. You should research this a little further so you have a clear understanding of what you can and can't do with msconfig.

or simpler yet

Safe-Mode

Start \ Programs \ Access. \ System Tools \ System Restore

Select restore point prior to install of whats giving you the problem.

Again, Good Luck

PS If you try to install it again, turn of antivirus and other open programs etc..
 

Read other 1 answers
RELEVANCY SCORE 102.4

I was browsing the internet the other day when I clicked on a link and my computer shut down. I immediately knew it was a bad link. My computer rebooted and it wouldn't let me on IE after that at all. I then did a restore to the previous day. I was about to get online so I went and downloaded Kaspersky IS and scanned my computer. My laptop messed up and rebooted itself. Then got Anti-Malware Bytes in Safe mode and ran a scan, still had issues Kaspersky not running right and my computer freezing after just a couple of minutes. Went back and did a restore again to the same spot and this time said forget Kaspersky and jsut did AMWB. It showed my computer is clean, yet about 2 minutes after booting, my computer reboots and the safe mode option pops up. I can run ok in safe mode but cannot get it to work in normal mode. I did trend micros housecall and another online scanner and all say my computer is clean. Yet, when I start IE, I am redirected on every link I click to scour..... or another site with links on it. Any help is greatly appreciated, as well as a recommendation for a better Anti-virus. I jsut had McAfree that came with this laptop. Thanks!






.
DDS (Ver_2011-06-12.02) - NTFSx86 NETWORK
Internet Explorer: 8.0.7600.16385
Run by Mom at 1631 on 2011-06-20
Microsoft Windows 7 Home Premium 6.1.7600.0.1252.1.1033.18.2812.1805 [GMT -4:00]
.
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes =... Read more

A:Only runs in safe, redirects even in safe, reboots in normal mode..no virus' found

oh and Malwarebytes did block a 91-207-192-22 port 49179 svchost.exe

Read other 9 answers
RELEVANCY SCORE 101.2

My laptop keeps getting a BSOD with the message "Page Fault in Non-Paged Area".

It only does it in normal mode and not while in safe mode. The BSODS are random in nature sometimes occuring immediately on start-up while other times waiting an hour or more.
Here are the logs from rootrepeal and DDS:

A:BSOD in normal but not safe mode

I have fixed the problem.

Read other 2 answers
RELEVANCY SCORE 101.2

Hey everyone,
I just got my sisters computer as it will not start at all. Everytime after the Vista loading screen I encounter a BSOD. I attached a log of the Memory.DMP from WIndows debugger. Can anyone take a look at it and let me know what you think?

So far what I've tried:

Memtest
Chckdsk
sfc scannow
Swapping Memory Dimms
Resetting CMOS
System Restore
Vista Startup Fix
The computer will run fine if I load it up through UBCD4 windows. So I don't think it's hardware related.....
 

A:BSOD: Normal and Safe mode;

anyone? shamless bump!
 

Read other 2 answers
RELEVANCY SCORE 101.2

I need help. I have a Dell Insipron 600m and i am getting the BSOD in safe mode and booting normally.

I believe this was caused by the ANTIVIRUSPRO_2010 that was installed on the computer by accident. This is one of the scam antivirus' that is in the news going around. Anyway....

The error code is 0x000000E3

I can boot to the recovery console and get to the C: prompt. Not sure where to go from here. I am new at this.

thanks,
 

A:BSOD in safe mode and normal

I strongly suggest that you go to our Virus and Malware removal forum. Read the UPDATEd 8 Step sticky, follow the steps as given -- don't skip any steps -- and post the three required Logs at that forum.

You will continue to have issues until your system is clean.
 

Read other 6 answers
RELEVANCY SCORE 100.8

Hello ladies and gents , im having a problem with my emachine T1120. It starts up and goes through the welcome screen then goes to bios settings , I click on "start windows normally" and enter it and the machine runs right back to the original bios screen , cant figure, unplugged and pressed the power button several times plugged in same result, why? I added no new hardware or software just turned it on and wa la

A:Win.xp emachine starts and runs safe mode, safe mode with networking

hello and welcome to BleepingComputer,,
 
     this is reminiscent of BIOS settings that need to be reset to default. you can do this by using that option in BIOS. do you see the option there? 
 
if this pattern exists after BIOS reset, then there are other XP level options to try like console command /sfc scannow and chkdsk /r
 
 not to long ago, i was dealing with a PC that was doing this same thing, and it was the hard drive (SATA) protocol setting in BIOS, it had to be set to IDE.
 
one more thing, this could be blue screen error that isn't halting, just looping boot. is there an option at the boot screen (the one with the safe mode options) about halting on errors?

Read other 3 answers
RELEVANCY SCORE 100.8

Hello,

Recently my dad's computer had a corrupted hive and boot.ini. Via this website, I was instructed to run a chkdsk /r while in the recovery console. Everytime I used his OS disk to get into the recovery console, it prompted me for a password and I didn't know it (nor could I leave it blank). I decided to use my OS disk from my computer and I could fix the problem. Now, though, everytime I startup the computer, it prompts me to start windows normally, in safe mode, in safe mode with networking... To give further information...on that same screen there is an option for Windows XP and Windows XP Home Edition. Don't know if that has something to do with it. They both work though when I press enter on either one. Could anyone help me stop the computer from prompting me??? Thank you for any help.

Read other answers
RELEVANCY SCORE 100.8

This morning we had a power outage and when I turned my computer back on, it would not boot. I tried several times to hard boot, with no luck. Then I tried safe mode. Ran an antivirus scan and it showed malware and several infections which it cleaned. The computer still would not boot normally. I then ran chkdsk, still would not boot normally. I have ran malware bytes, registry repair and the registry defrag program as well as done a disk clean up. It still will not boot in normal mode.
Since my last problems that you helped me with, I have upgraded to a broadband internet connection and have a home network. The 2 other computers on the network are fine.
A week ago, I had purchased Avast internet security and had problems immediately. It would not allow me to connect to the internet. That was uninstalled and I went back to the free Avast antivirus, Zone alarm and Spyware blaster. I was very unhappy with Avast customer service and support iYogi and decided I did not want Avast on my computer at all. I have since downloaded PC tools free antivirus. Once I have my computer operational again, I am open to suggestions.
Fortunately, I did not change anything on the other 2 computers. Just mine.
Running Windows XP 3 .
Thank you.

A:[SOLVED] computer will not boot except in safe mode or safe mode with networking.

what are you running
video card
cpu
m/board
ram
power supply
brand
model
wattage

check the listings in the bios for voltages and temperatures and post them

the outage may have damaged the psu

Read other 19 answers
RELEVANCY SCORE 100.8

I need some help please as I do not know where to start.

I installed a Windows Update a few days ago and then got a BSOD the next time I turned my PC on. So I did a system recovery and this seemed to work.

Now, it's happened again without me doing a Windows Update and I cannot get into safe mode.

I am really sorry but I cannot even follow the BSOD instructions to run a diagnostic tool because I literally cannot get into anything to run the diagnostics.

Can anyone offer me advice?

A:Windows Normal Mode Crashes to BSOD and Safe Mode doesn't load

We can offer the best assistance if you would upload the following information
http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 100.8

laptop has been randomly freezing. cursor disappears no keyboard function. only thing to do is manual shutdown.

Now getting a BSOD error 50.

any help?

A:BSOD BCCode 50. freezes in normal mode, works fine in safe mode

Code:
BugCheck 50, {fffff80040f9e3b0, 1, fffff80000b9a1aa, 5}

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Could not read faulting driver name
Probably caused by : ntoskrnl.exe ( nt_fffff80000b95000+51aa )

Followup: MachineOwner
---------
Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made ... Read more

Read other 9 answers
RELEVANCY SCORE 100.8

Everytime i open my pc up in normal mode, it seems to restart itself within a few seconds to a few minutes, It tends to happen when i open up a program like Chrome. I',m currently on safe mode with networking and have done registry cleaners, updated video card drivers and looked for viruses, yet nothing has seemed wrong, I've also done a system restore to when my pc was working fine, but it still was happening, I saw on another post here that i should post my msinfo32 so here you go, Thanks.

A:BSOD only occurs in normal mode, Works fine on safe mode.

Just tried opening in normal mode again, got a blue screen within 2 minutes. Didn't open chrome, only programs i had opened was mozilla firefox, and startup programs

Read other 6 answers
RELEVANCY SCORE 100.8

I'm not sure what causes my BSOD. The errors range from BAD_POOL_HEADER to ntfs.sys to drivers-something.

I am currently running Safe Mode with Networking and things seem stable.

I ran Anti-malware (nothing found), VIPRErescuescanner (nothing), fakereanfix (didn't help), ComboFix (probably made things worse).

Are my drivers up to date? No, probably not, but at this point, I'm scared to change anything else.
Is my windows 7 up to date? No updates installed since Jan 2012, I'm too scared to update anything lest I cause more BSODs.

Minidump attached in next post.

A:BSOD in normal mode (various errors), Runs fine in Safe Mode

minidump per SF_Diagnostic_tool

Read other 8 answers
RELEVANCY SCORE 100.8

Hello,

From last 2 days I am facing constant crash in windows 7 normal mode (Lenovo notebook G580). but when I do boot the pc in safe mode with networking, crash never occurs. I am posting this thread in safe mode only from the same laptop. I have dmp file generated using verifier. and the same with provided exe here. I will try to upload both. I think some driver is causing the crash but can't find which one. please help to resolve this as I hope must not be the hard disk issue.

A:PC working fine in safe mode but crashes (BSOD) in normal mode

  
Quote: Originally Posted by amitshahc


I think some driver is causing the crash but can't find which one.


The thread title gives the exact impression. And it was a good step to enable verifier.

Now disable verifier.

Then ....
Update the SplitCam product: SplitCam free webcam software for video streaming and adding cool webcam effects

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus (MSC) and the touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Then run the laptop normally. Let us see any further BSOD crash dump after doing it.

Read other 1 answers
RELEVANCY SCORE 100.8

Hello,

My laptop is slow to boot and will run for 5-10 minutes in normal mode before it freezes and the mouse cursor disappears. At this point it will be completely frozen and I must hold the power button. In safe mode, it seems to run fine without any issues. I have gotten the BSOD twice with this problem, but never long enough for me to actually read what it said. If it makes a difference, my battery is nearly dead and I have to leave the laptop plugged in almost always.

The following symptoms could be entirely in my head...but I figured I would just give all of the information. I think I hear a slight ticking noise on startup and it seems like the fan is working overtime.

The requested .zip file is attached.

Thank you very much for any help. I'm willing to upload any more information you need if you'll tell me how to do it, I'm not overly computer-savvy.

Thanks,
Bob

A:all good in safe mode, freezing in normal mode w/ occasional BSOD

Welcome to the Seven Forums.

While we await a BSOD expert to take on your thread, maybe you can work thru these steps...
Troubleshoot Application Conflicts by Performing a Clean Startup
...since you mentioned that thing work in the safe mode.

Read other 7 answers
RELEVANCY SCORE 100.8

My Toshiba satellite will only boot in safe mode tried sfc/scannow getting this message

Windows resource protection found corrupt files but was unable to fix some of them.

I've tried a system restore but that wasnt very successful either, if I uploaded the CBS log of the scan could someone try help me with the problem. Thanks

A:BSOD when trying to boot in normal mode, safe mode works fine

You may need to run SFC up to 3 times for it to have a chance to repair all files.

If it won't then you can consider a Repair Install.

However be aware that factory preinstalled Win7 is one of the worst possible installs of Win7 one can have, larded with bloatware and duplicate utilties that intefere with better versions built into Win7. So I would strongly consider doing the vastly superior Clean Reinstall - Factory OEM Windows 7.

If you decide to try to repair you can also capture the BSOD file and post it up for one of our BSOD analysts as shown here: Blue Screen of Death (BSOD) Posting Instructions - Windows 7 Forums

Read other 3 answers
RELEVANCY SCORE 100.8

My computer was running slow with the HD churning away, so I ran the anti-ware (Malwarebytes and Trend Micro) and found no infections.

Then I ran defrag, but had only 5% free space, so I deleted and moved files and got to 15%, but defrag runs for 10 minutes and declares itself done, but it looks like only about 20% of the drive is getting defragged and the rest is badly fragmented.

I ran CCleaner, chkdsk /r & /f, and went to run defrag in safe mode only to find trying to boot in safe mode causes the dreaded BSoD! But WinXP SP3 runs fine in normal mode!

Stop: 0X00000007E (0XC0000005, 0X80537009, 0XF7C5E3E0, 0XF7C5E0DC)

No hardware changes in more than a year, the last time I ran in safe mode was a couple of months ago to get rid of a nasty Trojan.

So, why will defrag not finish? Why does safe mode cause the BSoD?

FWIW:clearing up the HD space had reduced the HD churn.

Additionally:
I ran chkdsk /r in the recovery console and System File Checker, with no apparent change.

Results of chkdsk from Event Viewer:

CHKDSK is verifying Usn Journal...
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
Free space verification is complete.
31768537 KB total disk space.
25785876 KB in 98131 files.
35884 KB in 11699 indexes.
0 KB in bad sectors.
364105 KB in use by the system.
65536 KB occupied by the log file.
5582672 KB available on disk.
4096 bytes in each alloc... Read more

A:Safe mode causes BSOD; WinXP OK in normal mode; defrag not completing....

Running processes can cause this like Toolbars if you have toolbars I'd say remove them completely as they will conflict with I.E.'s toolbar as with other programs like defrag, ( to remove a program make sure it's not running then click Start/ Control Panel / Add-Remove Programs then restart the pc Always restart the pc after installing , removing , or updateing a program ). Then disconnect from the internet and right click on any icons next to the clock and click exit or end to stop them till your done doing the defrag. Then run cleanup disk and try to defrag. If no joy please post a HiJackThis log so we can see if there's other issues http://forums.techguy.org/malware-removal-hijackthis-logs/622404-please-read-here-first-before.html
 

Read other 1 answers
RELEVANCY SCORE 100.4

Windows just downloaded an update to my ASUS x83V laptop and now I can't get it to boot up. I've tried booting in normal mode, last successful mode, safe mode, safe mode with command prompt and nothing works.

If trying to boot in safe mode it gets stuck on crcdisk.sys. When trying to boot in any mode it eventually hits the blue screen with a STOP error of 0x0000001E. I have also gotten 0x0000007E and 0x00000024.

I am positive it's the latest Windows Update that caused this because my computer at work, which also runs on Vista and is also an ASUS, had an update yesterday. When I came into work this morning and tried to start up it was unable to and did a start up repair. That didn't work but it gave me a system restore option which did work.

Unfortunately my ASUS laptop does not prompt me to do a repair nor a system restore. The recovery disk I have that came with the laptop only allows me to do a restore which erases everything on my HD.

I'm only somewhat computer savvy; better at working with them than fixing them so please try to put things in layman's terms. Thank you!

Read other answers
RELEVANCY SCORE 100.4

I had this machine built just over a year ago, and only had occasional crashes (no particular activities seemed to generate the issue). About 2 months ago the crashes became more persistent, and upon restarting the machine would have trouble loading normal mode. At the screen that reads "welcome" the spinning wheel would simply freeze, and the computer would lock up. As this problem persisted the computer would either automatically reboot itself each time, or crash into a BSOD and run a dump. I can, however, start it in Safe Mode without issue.

It had been running the same install of windows 7 ultimate x64 until a couple of weeks ago when I attempted to reinstall. This solved nothing, so I reinstalled again, this time deleting the partitions and formatting the drive. Again, the problems persist. I'm inclined to think they're hardware related at this point, but I'm in no way an expert.

From the most recent BSOD:




Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8009500010
BCP2: FFFFF880108EAF10
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


My system stats:
MB - Asus P6X58D-E
CPU - Intel i7 950
RAM - 3 x 2gb Kingston HyperX DDR3 1600 SDRAM
HD - Western Digital 640gb 7200 rpm SATA 6gb
Vid - EVGA GeForce GTX 460 ... Read more

A:BSOD during startup for normal mode. Can only start in safe mode.

Look at Computer lags every couple seconds

Try the following:
1. Download and install Driver Sweeper
2. Download the latest driver for your display card
3. Click Start Menu
4. Right Click My Computer
5. Click Manage
6. Click Device Manager from the list on the left
7. Click the + next to Display adapter
8. Right click your display/graphics card device
9. Click Uninstall
10. Check the box to Delete driver software for the device
11. Click OK
12. Restart your computer in safe mode
13. Run Driver Sweeper, select display card manufacturer's drivers, analyze, clean
14. Restart your computer
15. Install the latest drivers

Update to SP1Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site
Links to Service Pack 1 (SP1) and preparation for SP1 courtesy of JMH

Also, it appears if it is hardware, it is probably your graphics card. Recommend trying a different display card and seeing if it resolves the issue (borrow one from someone if you can since buying one and replacing the old one may not fix the problem and may be a waste of money).

Edit: I know you may not be able to do all above steps in safe mode, but do what you can.

Read other 6 answers
RELEVANCY SCORE 100.4

my sysnative file collection is too big to attach to this post
 
http://speccy.piriform.com/results/B8ADIoyxcxAqZZcjvWqspE7

A:Windows 10 BSOD in normal mode, stable in safe mode

We need the Sysnative files.Please see if you can create 2 or 3 zip files out of the SysnativeFileCollectionApp folder; attach separately to a single post or create 2,3,4+ posts if necessary.We cannot help you without those files.Regards. . .jcgriff2

Read other 5 answers
RELEVANCY SCORE 100.4

Recently purchased this all in one PC on second hand. It initially had Windows 7 Home Premium 64 bit Japanese OS. I installed Windows 7 Ultimate 32 bit English OS after purchasing and installed the Drivers from the DVD which came along with the PC. Ran windows update till date. But got BSOD many times. Thinking of Hard drive issue, changed the hard disk first time with another used one and next time with newly purchased one.

All the time installed Windows 7 Ultimate 32 bit English OS and installed the Drivers from the DVD which came along with the PC. Ran windows update till date. But in all 3 hard disks getting the BSOD error.

Installed Microsoft Security Essentials each time and checked for virus. Ran Dell Diagnostics downloaded from Dell website and found no issues.

Got "Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D" error on Event viewer many times. After searching some forums deleted MSE.

Ran the SF diagnotic utility and uploading the file for your reference.

Please help me to overcome this issue.

A:BSOD in Normal mode but works fine in Safe mode

Attachment in the first thread gauti2009.zip is SF Diagnostic Tool run in Safe mode.
Attachment in the current thread SF_02-09-2013.rar is SF Diagnostic Tool run in Normal mode. (Somehow no BSOD during this short time, able to get the file and post it).

Hope this will help.

Read other 2 answers
RELEVANCY SCORE 100.4

Hi

XP sp3 4 gb ram'

I got a bogus PC Scan virus which cripple my computer:
The desktop was wiped clean of all files.
The quick launch vanished
Internet was disabled
etc

The PC Scan icon appeared in the clock tray. I got bogus warning about buying their product to fix the problems.

I tried to restart in Safe Mode and got the BSOD after the Windows flashscreen appeared at startup.

The tried to restart in normal mode and i got the BSOD.

I disconnected all hardware and tried to restart in safe mode and in normal mode several times and every time I get the BSOD.

I don't know if the PC Scan virus caused the BSOD or not.

I am able to startup from a bootdisc, but the only option is to reinstall Windows

My data is backed up but I would like to recover files from the desktop and program files.

What are my options.

A:[SOLVED] BSOD when starting in normal mode and safe mode

Hi dzz and welcome to TSF,

At this point, considering we cannot acces the operating system, you're left with two options.

1. Perform a System Repair. Boot from the installation DVD and choose "Repair my system". Choose to repair any faults found automatically.

2. A complete reinstallation of your operating system.

Read other 5 answers
RELEVANCY SCORE 100

Hi Guys n Gals , my name is Mark , I have an old laptop I am trying to get going , it has never been online so its not a virus , and the cd rom does not work , and no USB sticks have ever been plugged in all it was used for was playing bejewelled the old one and windows games , not pad then kind of tasks . once shut down moved to new place , unpacked , it would not start up.   by this I mean ... the screen that shows up usually after a improper shut-down .... Safe mode ... Safe mode with network .....  Start windows normally ... that screen ...  no matter what selection I make it freezes there and I can no longer move or alt cntr del ... nothing works .. power button . also Its so old i cant figure out how to boot from usb as the cd rom does not work . I thought I figured it out , but it kept bringing me to the start normally ,,, safe mode ... safe mode with networking screen after 15 seconds of black screen , witch is the reason I thought it was working because generally when I boot other computers the screen goes black with the small flashing thing in the corner for a few seconds then starts booting windows , but this one brought me to that menu then froze ...   
here is a pic of the menu i speak of .
 
 ACER TravelMate 4000 Series MODEL: ZL1
 
Thank you very much for reading my post!
 
Mark

Read other answers
RELEVANCY SCORE 100

Hi
I have Thinkpad T43, with windows XP professional.

Since few days whenever i launched my ATI catalyst control center I would get BSOD and laptop will boot automatically and then everything would be fine.

Then while browsing my wife downloaded some media player exe, and since then my IE was redirecting to unknown sites (xalab etc) not to mention various ad pop-ups. One of the online video sites gave a message that I have TROJ/Rustok-N. (Also I would like to mention since couple of months my System Restore was not working although everything else was working fine)

I ran spybot, malawarebytes, trojanremover and removed whatever was reported. But the problem persisted, so I renewed my Norton Internet Security (actually got Norton 360), ran scans but it couldnt find anything.

Then I booted in safe mode and ran all these again, last thing I remember trojanremover prompted to remove something like sv~.exe and i did, when i restarted the system in normal mode I got BSOD and laptop rebooted, I disabled automatic restart on failure but it keeps on doing that.

I then went to Access IBM and restored by configuration which brings back the system files to previous state (the most latest point available was 07/2006)
I still got the BSOD while booting into normal mode, but safe mode was working fine.

I then went into safe mode and disabled couple of services on startup, then my laptop booted fine in normal mode, I found that now windows xp was reset to SP2, so i ran windows update w... Read more

A:BSOD 8E while booting into normal mode, Safe mode fine. Disable automatic restart doesnt work.

FWIW: http://kadaitcha.cx/xp/stop_error.htmlAs stated, it's a matter of hide-and-seek, with no guarantee of finding the culprit.Another link that may be useful: http://aumha.org/a/stop.htmLouis

Read other 1 answers
RELEVANCY SCORE 100

Recurring BSOD with or without GPU installed, in and out of Safe Mode, whether it's idle or in use. MemTest86 failed with both RAM modules installed, but completed 11 and 8 passes respectively on each module separately. Currently only using 1 module.

I've read through a few other threads and have attempted to collect as much logs/info as possible. System specs on my profile. The motherboard is old and may be faulty, my ASUS recently failed and a friend lent it to me. The BSOD started after about 2 days of use. I'm of the opinion it's either the mobo or the RAM.

My apologies for the short description, but I've BSOD while trying to type this.

Thanks for any assistance.

A:BSOD recurring both in Safe Mode and Normal

Hi Sejian.

My opinion goes with you, after checking the crash dumps. So many different BSODs in a small period, which indicates to memory failure, mostly.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
________________________

Code:
BugCheck 4E, {8d, 5b01b, 1c25d, 81}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+96c )

Followup: MachineOwner
---------

Code:
BugCheck A, {fffffa7fffd02fd0, 2, 1, fffff8000328e4ec}

Probably caused by : rdyboost.sys ( rdyboost!ST_STORE<SMD_TRAITS>::StReleaseRegion+4e )

Followup: MachineOwner
---------

Code:
BugCheck A, {fffffa7fffdd4fe0, 2, 1, fffff80003251ac1}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+3c4 )

Followup: MachineOwner
---------

Code:
BugCheck 50, {ffffffffffffffff, 0, fffff800024c1630, 0}
Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4518f )

Followup: MachineOwner
---------

Code:
BugCheck 7F, {8, 80050031, 6f8, fffff800024da205}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------

Read other 7 answers
RELEVANCY SCORE 100

Hi, I am running a Windows XP SP2. I was trying to install macdrive 7.2.2 (trial) (http://www.mediafour.com/products/macdrive/) After the install, it asked me if I wanted to restart now. I chose yes. Soon after, my computer went to a blue screen. I tried to reboot. The desktop came up and was loading when it blue-screened again. When I tried to reboot again, my computer hung at the windows logo for a long time, then got to the logon screen. When I type in my password and press enter, it blue-screens again. I tried rebooting a couple more times and it did the same thing. Then I tried rebooting in safe mode, but that hung at the windows logo also. Both "safe mode with networking", and "use last working windows configuration" do the same thing.

The BSOD says:

*** STOP: 0x00000022 (0x000F00CF,0xEC66E7CC,0xEC66E4C8,0xF82F3154)

*** MDFSYSNT.sys - Address F82F3154 base at F82BB000, DateStamp 48863529
I've a Dell Dimension DIM 4700 with 512 mb RAM, 2.79 GHz. XP is Home Edition SP2 2002 version. The hard drive capacity is 71.7 gig.

I ran some hdd diagnostics. My hdd manufacturer's diagnostics tool said "passed." Memtest86 said "pass complete, no errors."

I've tried typing FIXBOOT in the recovery console on my Windows installation disk. No luck.

I do not have a recent backup, and while it would not be catastrophic to lose what's on my hdd, I would like to avoid it. I also have not used the system restore. I know, I... Read more

A:XP won't start in normal or safe mode after BSOD

Read other 7 answers
RELEVANCY SCORE 100

My video card was having problems so I used the warranty and sent my PC for repairs. They told me the card was faulty and swapped it for a new, identical one. When it got back I tried to boot into Windows, but the animation froze for a second right at the beginning and then a BSOD flashed for a tenth of a second and then it rebooted. If I try to boot into safe mode it shows me the log of the drivers being loaded, then it stops for a second at "amdkmpfd.sys" and BSOD's for a fraction of a second and reboots. I can't even read the BSOD because it flashes away almost instantly.

I searched the internet and did these steps, all to no avail:I ran startup repair
I ran sfc /scannow at the command line
I copyed the contents of Windows\system32\config to a backup folder, then copyed the contents of RegBak to it (supposedly restoring a backup of the registry). It also failed so I restored the mybackup.
I renamed amdkmpfd.sys to amdkmpfd.sys.old. I rebooted, safe mode now hangs and crashes at "classpnp.sys", renamed classpnp.sys, now it hangs at "disk.sys", did the same, now hangs at "fvevol.sys", etc...
I also did startup repair several times between these steps.

What can I do? Any suggestions? If you need more info, please ask. Thanks for any help.

EDIT: I forgot to mention, it isn't a hardware issue, because I can boot into Linux and use even the graphics card just fine. The graphics card is a AMD 7970M

A:BSOD at boot, both normal and safe mode

Bump. I've managed to film the BSOD with my phone and get the error message:



Any tips?

Read other 8 answers
RELEVANCY SCORE 100

Hello all,
I was wondering if anyone can help me with this issue. I'm having BSODs 19/20 times (image below) and was wondering what I can do to solve this issue. I couldn't even boot into safe mode!
I'm running Vista 64bit Ultimate on a Dell precision M2400 laptop and this issue has just started happening today. I don't recall installing any software or updates, so I'm not sure what could have caused this.

Any help is very much appreciated!

A:Vista Help w/ BSOD on normal and safe mode!!

Hi -

Very nice screenshot of the BSOD.

I consider 1 BSOD too many, let alone the 20 you have suffered from. The bugcheck per the screenshot:

0x7e (0xc0000005, 0xa600006ed84, 0xa6009d14c8, 0xa60019d0ea0), probable cause = ci.dll, the Microsoft Code Integrity module. The timestamp per s/shot = 47be5bb6, translated = Fri Feb 22 00:20:54 2008.

0x7e = SYSTEM_THREAD_EXCEPTION_NOT_HANDLED = a system thread generated an exception not caught by the error handler. The exception here can be found in the first parm - 0xc0000005 = a memory access violation.

Seeing ci.dll is somewhat bothersome to me because code integrity theoretically should not occur on an x64 system unless hardware fails or something updated the NT Kernel. Take a look at the Event Viewer - specifically the Code Integrtity log -
Applications and Services | Microsoft | Windows | Code Integrity | Operational. I assume and hope it is related to a cache of some type. What entries are there? You can 2x-click on an entry for additional detailed information. Copy/paste into post. To note, the actual location of the log (in case I ask for it) is:

Code:
%SystemRoot%\System32\Winevt\Logs\Microsoft-Windows-CodeIntegrity%4Operational.evtx
You said this happened w/in last 24 hours. First thing is to follow THESE instructions which will gather system information and copy the mini kernel dumps produced by the BSODs. This will preserve this information - we may need it.

Take a look at PER... Read more

Read other 3 answers
RELEVANCY SCORE 100

Hello, I was getting alerts from my antivirus program, that it was blocking some trojan horse from 91.212.226.180, can't recal the exact name. But it was happening for two days, with intervals of 5-15minutes, between blocks.
I desided to look into it, and tried some malware removal software, and had to reboot, after reboot i get bsod in normal mode with the problem 0x00000024. Altho i can boot to safe mode, and do things from there. The malware removing programs have to restart after scaning, to delete threats, but on restart it automatically boots to normal mode and gets bsod again. And everything that was scheuduled for deletion stays where it was.
I would like to get some guidance from you guys, because i dont know what to do anymore.

A:Need help, bet BSOD in normal, can only boot safe mode

boot into safe mode with networking, and run malware bytes. Here's a link:MalwareBytesOnce you load it, run the program, but before you scan, click the update tab and download any updates. Then scan away.Once you find and remove any viruses, it will make u reboot. When you reboot, reboot to safe mode again, then run chkdsk, which will again for you to reboot/Click Start, and then Run.In Open, type cmd, and then press ENTER.chkdsk /rhit y to schedule the checkdisk, then reboot once it takes you back to a command prompt.

Read other 3 answers
RELEVANCY SCORE 100

Okay I am using my mom's computer because I cannot boot mine.. The other night Avira alerted me to a virus, I ran a scan, deleted the virus and restarted the computer. Upon restart I received the BSOD. I tried safe mode and it runs a bunch of commands and then stops. Nothing more. I tried going into recovery console but don't know what command to type in. It says drive C and press enter to exit recovery console. Can this machine be saved???? Please help?

Mike

A:Cannot boot in normal or safe mode. BSOD

It can be difficult to determine what exactly caused this problem. Bootup failure can be due to a variety of issues to include application faults, hardware failures, loose pin connections or malware. Startup failures that occur before the OS loader (Ntldr) starts could indicate missing or deleted files, or damage to the hard disk master boot record (MBR), partition table, or boot sector. If a problem occurs during startup, the system might have incompatible software or drivers, incompatible or improperly configured hardware, or corrupted registry/system files. However, the first thing to do is check all your hardware connections and ensure they are fitted properly.If you cannot bootup or logon in normal or safe mode, then your options are limited.10 things you can do when Windows XP won't bootWhat to Do When XP or 2000 Won't BootSystem Restore Rollback in XP using ERD Commander System RestoreHow to perform a Repair InstallLanga Letter: XP's No-Reformat, Nondestructive Total-Rebuild OptionHow to perform a Repair/Reinstall (with screenshots)You may be able to use a Windows XP bootable Floppy Disk to boot from a diskette instead of your hard drive. If your hard drive's boot sector or Windows' basic boot files have been corrupted, this disk will circumvent the problem and boot you into Windows. If you don't have an emergency boot floppy, you may be able to use one created on another PC running Windows XP but there's no guarantee that it will boot your ... Read more

Read other 5 answers
RELEVANCY SCORE 100

Hi everyone

Im having problems with my computer. It keeps coming onto the BSOD when it is booting up (sliding bar at the bottom of the windows logo). Now i know there are quite few ways of fixing this from safe mode. I cant get into safe mode as well which sucks

however on my 2nd drive I have ubuntu installed which means i can browse my xp hard drive... is there a way of fixing or finding the fault and fixing it through exploring files, registery etc?

Thanks
 

A:BSOD Windows XP (normal and safe mode)

Read other 6 answers
RELEVANCY SCORE 99.6

Hi all,

I've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode.

It boots completely fine in normal mode, no errors or anything.

The BSOD I get is:

DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)

Thoughts?
 

A:BSOD when booting to Safe Mode, not Normal Mode?

Bump for great justice.
 

Read other 2 answers