Over 1 million tech questions and answers.

How can I enable USB Support in Safe mode

Q: How can I enable USB Support in Safe mode

I am using a USB device for Internet Service. I need to boot into safe mode with networking support. Is there a solution that USB port could be detected in safe mode , letting me use Internet

I am using Windows 7 Ultimate x64 running on
HP G6 pavilion note book

RELEVANCY SCORE 200
Preferred Solution: How can I enable USB Support in Safe mode

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: How can I enable USB Support in Safe mode

Your USB controller driver should load normally in Safe Mode. If not look in Device Manager to see if it is detected and in error. If so uninstall it in Dev Mgr, reboot into Safe Mode to see if it loads.

Otherwise install it from the Support Downloads webpage for your model PC, probably contained in chipset.

May I ask why you are working in Safe Mode?

Is this the original corrupt HP bloatware preinstall? If so you should strongly consider doing what most tech enthusiasts do and Clean Reinstall - Factory OEM Windows 7,
or at least Clean Up Factory Bloatware.

Read other 4 answers
RELEVANCY SCORE 66.8

I've recently had a problem with Windows, and I can only boot in Safe Mode. Everything there works as it should. However, the drivers for my CD burner do not activate in safe mode.
In order to fix my problem, I need to create a recovery disk for vista, and I have the disk image (iso), and the software needed to do it. Only I can't, because of those pesky little drivers and their reluctance to run in safe mode.

I know it is possible in XP to solve this issue through regedit, I simply wondered if anyone knew how to load the necessary drivers for CD burning in Vista's safe mode.

Thanks in advance!

Read other answers
RELEVANCY SCORE 66

I am trying to follow this Tutorial which involves using the following command line
 
'bcdedit /set {default} bootmenupolicy legacy'.  However, every time I try, with a range of variations, the response is  that there is no such command as 'bcdedit'.  Running it, as suggested, produces no response.
 
Can someone help, please?
 
clayto
 
 

A:How to enable the F8 key to start Safe Mode in Windows 8

Did you use an elevated command prompt by typing CMD in the Search box and Right click > Run as Adminstrator?
 
What do you get if you simply type bcdedit /? at the command prompt? bcdedit.exe should be located in C:\Windows\System32.

Read other 17 answers
RELEVANCY SCORE 66

Source: answers.microsoft.com

Quote:




If you want to boot into Safe Mode to try and fix any issue, you need to enable it manually because it doesn't come enabled in Windows 8 by default.
To enable and use Safe Mode, follow the inline steps:
1. Click Start and click Search.
2. Type cmd and press Enter. cmd.exe appears in the results list.
3. Right-click on cmd.exe. An Advanced icon displays on the lower, right corner of the screen.
4. Click on Advanced icon and select Run as administrator. The User Account Control dialog box gets displayed.
5. Click Yes to continue.
6. Type bcdedit /enum /v on the command prompt and press Enter.
7. Type bcdedit /copy on the command prompt but this time do not press Enter.
8. Now, you need to add the identifier of the Windows Boot Loader with a description. For this scroll down to the Windows Boot Loader display. Right-click and select Mark from the popup menu. It will highlight the identifier. Press Enter to copy it
9. Go to the command prompt where you typed the command, right click and select Paste from the popup menu. The identifier gets copied after that command.
10. Press Space and type /d "Windows 8 Developer Preview (Safe Mode)" and press Enter to execute the whole command i.e. (bcdedit /copy identifier (copied) /d "Windows 8 Developer Preview (Safe Mode)"
11. Type Exit and press Enter to close command prompt
12. Again go to Start >> Search and type msconfig and press En... Read more

Read other answers
RELEVANCY SCORE 64.8

I need to set permissions to allow access to a computer in safe mode (w/ networking), both machines are on LAN and I tried it reversed and works fine (safe mode computer controlling normal computer) - I tried following the steps here but there's no "Remote Desktop" category with the three options in safe mode. Is there any way to access that menu?

Read other answers
RELEVANCY SCORE 64.8

I want to be able to adjust my display colors while in Safe mode in Windows 8.1. Ideally I'd like to use f.lux for the purpose. Either way I have to enable the video card driver (Intel (R) HD Graphics). In this thread there is a registry solution "How can you make the sound work in safe mode?" for Window Vista, how to adapt it for my case.
Thank you!

Read other answers
RELEVANCY SCORE 63.2

i am having a couple of problems my help and support will not work say system service not running , i have some copy disks that you have to go to my computer and open the cd drive but all i get when i try to open it there is a key next to it saying safe mode and it will not open. can any one help.

colin snr
 

A:Solved: safe mode & help and support

Not sure I understand what you're talking about but if you want to get back "Help & Support", go to Start / Run / type services.msc / ok

Find "Help & Support", double-click on it and make sure the service is on Automatic (under Startup type).
 

Read other 3 answers
RELEVANCY SCORE 62

I have an old computer which was hit with an attack a few days ago. If there are no simple solutions I am hoping to at least recover some files. Can anyone suggest reasonably priced single session support or some type of downloadable repair kit or way of recovering files
 

Read other answers
RELEVANCY SCORE 57.6

Hi,My Computer which has Win Xp Sp3 is behaving like it is in safe mode , eventhough it is in normal mode .I noticed this because ,1. Avira Antivir Guard and Update cannot be launched bcz Scheduler is not running.2 . I tried to start scheduler ( under services.msc ) , but can't start it bcz of error 1084 ( safe mode situation ) .3 . I can't use Windows Update , bcz of error Error number: 0x8007043C ( same safe mode condition )4 . I ensured that BITS was set to automatic , but it can't run bcz of 1084 error.I have scanned with Malwarebytes, Spybot S&D , SuperAnti Spyware ( in real safe mode) - No DetectionHere is the dds log ,DDS (Ver_09-09-24.01) - NTFSx86 NETWORK Run by Administrator at 16:45:23.03 on Mon 09/28/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_12Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.510.112 [GMT 5.5:30]AV: ZoneAlarm Security Suite Antivirus *On-access scanning disabled* (Outdated) {5D467B10-818C-4CAB-9FF7-6893B5B8F3CF}AV: AntiVir Desktop *On-access scanning enabled* (Outdated) {AD166499-45F9-482A-A743-FDD3350758C7}FW: ZoneAlarm Security Suite Firewall *enabled* {829BDA32-94B3-44F4-8446-F8FCFF809F8B}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\system32\svchost.exe -k netsvcsC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Avira\AntiVir Desktop�... Read more

A:Safe Mode Error, WinXpSp3 behaves like it is in safe mode even in normal mode

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 56

okay... so i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode.... ive tried "last known good config..." and that too boots in safemode. so now im stuck, i cant get on windows. any help please?

im willing to start over but i dont know how to do that from here
 

A:STUCK in safe mode boot, safe mode doesnt work and restarts, REPEAT

Read other 11 answers
RELEVANCY SCORE 55.2

i have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.

i tried a different graphics card,but no joy.so i replaced the hdd drive and put a fresh copy of windows xp pro edtion on,but it loads all the files(i have not pressed f6)i just let it run its course on the disc,then it hangs up on the blue screen again with the words(crit error 0x0000007f)check hardware etc and if this is the first time you have seen it try starting windows again.

Thankyou for all your time.
 

A:Solved: xp safe in safe mode fine...mormal mode blue screen

Start in Safe Mode and look in C:\Windows\Minidump for crash log files with a dmp extension, like Mini071008-01.dmp. Zip 4-5 of the latest ones and post here as a ZIP or RAR attachment. The log file contains information useful to determine what caused the error, most likely hardware.
 

Read other 2 answers
RELEVANCY SCORE 55.2

I'm new here and in hopes of getting this resolved. I just installed the new Norton Systemworks 2005 and rebooted after installation. When the boot screen got up to the blue screen with the Windows XP logo before displaying the login names where you put in your password, it just stops. I restarted a few times and waiting a few more times thinking it may need to 'finish' installing. But each time gave the same results. Finally, I went in with 'Safe Mode' and got in with no problems. Tried again in normal mode after looking around for any obvious problems (none found)... back to square one. Tried again in 'Safe Mode with Networking' and it failed like normal mode so I suspected a networking problem??? The last thing I tried which made me mad is that I tried to uninstall Norton Systemworks in 'Safe Mode' and that failed!! Anyone in these forums know the cure? :dead:
 

A:Unable to get to login screen, works in Safe Mode but in Safe Mode w/ Networking

Just a thought

Safe-Mode
Start \ Run \ msconfig \ diagnostic startup
disable any services attached to your most recent install and restart
should get warning next boot about using msconfig, its ok
One key service that needs to be available is the installer service
Try the uninstall, if doesn't complete
Try the uninstall string in the registry only if you know what you are doing

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Under it you will see a list of installed programs. Some don?t show up as words but you can figure out what they are by looking at their values. What you are looking for is the uninstall string. Double click that key as if you were going to modify its value. Do a CTRL + C to copy and then exit the registry editor.

Go to START \ RUN and paste the uninstall sting and hit enter. This should launch the uninstall.

Just a thought though as I am not infront of a test system at the moment. You should research this a little further so you have a clear understanding of what you can and can't do with msconfig.

or simpler yet

Safe-Mode

Start \ Programs \ Access. \ System Tools \ System Restore

Select restore point prior to install of whats giving you the problem.

Again, Good Luck

PS If you try to install it again, turn of antivirus and other open programs etc..
 

Read other 1 answers
RELEVANCY SCORE 54.4

This morning we had a power outage and when I turned my computer back on, it would not boot. I tried several times to hard boot, with no luck. Then I tried safe mode. Ran an antivirus scan and it showed malware and several infections which it cleaned. The computer still would not boot normally. I then ran chkdsk, still would not boot normally. I have ran malware bytes, registry repair and the registry defrag program as well as done a disk clean up. It still will not boot in normal mode.
Since my last problems that you helped me with, I have upgraded to a broadband internet connection and have a home network. The 2 other computers on the network are fine.
A week ago, I had purchased Avast internet security and had problems immediately. It would not allow me to connect to the internet. That was uninstalled and I went back to the free Avast antivirus, Zone alarm and Spyware blaster. I was very unhappy with Avast customer service and support iYogi and decided I did not want Avast on my computer at all. I have since downloaded PC tools free antivirus. Once I have my computer operational again, I am open to suggestions.
Fortunately, I did not change anything on the other 2 computers. Just mine.
Running Windows XP 3 .
Thank you.

A:[SOLVED] computer will not boot except in safe mode or safe mode with networking.

what are you running
video card
cpu
m/board
ram
power supply
brand
model
wattage

check the listings in the bios for voltages and temperatures and post them

the outage may have damaged the psu

Read other 19 answers
RELEVANCY SCORE 54.4

Hello ladies and gents , im having a problem with my emachine T1120. It starts up and goes through the welcome screen then goes to bios settings , I click on "start windows normally" and enter it and the machine runs right back to the original bios screen , cant figure, unplugged and pressed the power button several times plugged in same result, why? I added no new hardware or software just turned it on and wa la

A:Win.xp emachine starts and runs safe mode, safe mode with networking

hello and welcome to BleepingComputer,,
 
     this is reminiscent of BIOS settings that need to be reset to default. you can do this by using that option in BIOS. do you see the option there? 
 
if this pattern exists after BIOS reset, then there are other XP level options to try like console command /sfc scannow and chkdsk /r
 
 not to long ago, i was dealing with a PC that was doing this same thing, and it was the hard drive (SATA) protocol setting in BIOS, it had to be set to IDE.
 
one more thing, this could be blue screen error that isn't halting, just looping boot. is there an option at the boot screen (the one with the safe mode options) about halting on errors?

Read other 3 answers
RELEVANCY SCORE 54.4

I recently attempted to clean my brother's computer after he aquired a virus from the torrent file program he uses. Regardless, I cleaned a trojan and a backdoor from his system from safe mode. I can not boot in normal mode. Everytime i try the system gets hung up at the windows loading screen then the screen turns black and sits there. I have to hard reboot. I ahve used a repar CD and i have come across an error 0x800700b7, i have also recived this when i tried to work around this problem "identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}"

OS= Win 7

A:System will only start in Safe mode, Clean virus in safe mode

You can spend a lot of time trying to fix the boot problem and clean the virus from the computer, or you can nuke it and reinstall Windows. I wouldn't bother trying to fix it, personally - I'd back up what I could and then I'd install Windows again.

Read other 9 answers
RELEVANCY SCORE 54.4

I booted into safe mode to try an fix a issue I selected to boot with command prompt butb I have a all black screen an can't get out of safe mode now I restarted the laptop a few times still the same 'anyone know how to fix this?

Read other answers
RELEVANCY SCORE 54.4

Hello,

Recently my dad's computer had a corrupted hive and boot.ini. Via this website, I was instructed to run a chkdsk /r while in the recovery console. Everytime I used his OS disk to get into the recovery console, it prompted me for a password and I didn't know it (nor could I leave it blank). I decided to use my OS disk from my computer and I could fix the problem. Now, though, everytime I startup the computer, it prompts me to start windows normally, in safe mode, in safe mode with networking... To give further information...on that same screen there is an option for Windows XP and Windows XP Home Edition. Don't know if that has something to do with it. They both work though when I press enter on either one. Could anyone help me stop the computer from prompting me??? Thank you for any help.

Read other answers
RELEVANCY SCORE 53.2

Alright this is a family's laptop that is about 5 or even more years old...has windows xp on it dont know the exact one -.-...alright.

My sister has been using it and says she has never done anything to it...which i dont believe but anyways this computer will not boot up what so ever...everytime you power it on it goes to the screen that says unexpected error software/hardware problem yada yada yada...and then it gives you the options of boot in safe mode, safe mode networking, safe mode command prompt, last known good configuration...and none of those will work...we do have the recovery disks to wipe it but are trying to find a better way if possible...and when you try to load into any of the safe mode choices it stops at multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\System32\Drivers\Mup.sys...will stay at that for about 5-10 mins and then just turn off...if you try to just do normal mode or last known configuration it just acts like it loads with the windows and the little green loading bar then shuts off...the more i type the more i think the harddrive is toast but im new and learning so i probably could be wrong. Just looking for suggestions =)

Oh and this pc will run very hot...so if its a hardware issue i would not be surprised.
 

A:HP Pavilion will not boot in safe, safe w/networking, safe command or in normal mode

I'm heading to work now ill be back later tonight so just post suggestions and i will try them. =)
 

Read other 11 answers
RELEVANCY SCORE 52.8

Yea trying to get ino safe mode. When I do hit safe mode and choose my account to log on instead of going to my desk top the screen goes blank and the words safe mode appear in all four corners.
Any help would be great!
Have a good day
John

Read other answers
RELEVANCY SCORE 52.8

Can't boot into Normal/Safe Mode with Networking, only safe mode...
Good Evening,I could do with some pointers on resolving an issue. I can only boot into windows in safe mode in Windows 10. Normal mode and safe mode with networking doesn't work. The problem occurred after a windows update. I have removed the latest updates that were installed and cleared any pending ones but it still won't boot properly. I have also run the troubleshooter and tried to recovery to an earlier date which also doesn't work.The laptop is a HP ENVY 17 notebook. At boot it just gets to the HP logo with the circular loading icon and no further and can only boot it into safe mode. Can anyone recommend the next steps? I have also tried the following;stopping startup items
uninstalling hardware drivers
removing recent software
running troubleshooters at boot
sfc scan
diagnostic/selective startups with minimal services running
Would the fact that I cant boot into Safe Mode with Networking imply its a network driver related issue?Bit of a dead end really, any help would be much appreciatedKind regardsTrevor
 

A:Can't boot into Normal/Safe Mode with Networking, only safe mode...

It's uncertain what the problem is - although a networking problem does sound likely.
Start with trying a clean boot:
Perform a Clean Boot:  http://www.thewindowsclub.com/what-is-clean-boot-state-in-windows
If that stops the problem, then re-enable things a few at a time until you figure out what's causing it.
Then uninstall the problem program (from Start...Settings...Apps...Apps & Features - if you don't find it there, check the right sidebar for Programs and Features and see if you can remove it from there).
 
Let us know what happens there and we'll move on from there if needed.

Read other 1 answers
RELEVANCY SCORE 52.8

ok i have a huge problem, i no virus scan capabilities in safe mode and in safe mode with networking, now i have tried to go back to reg. booting, and see if it is installed corectly, and from the looks of it, it is all icons and file folders are there and working.....now when im in either one of the two safe modes wither im on the amnstdr or mine the software will not open and it won't open, here is what comes up when i try to open it from program files:

"Faild to start the Symantec Management Client service. Error code returned:
0x8007043c
i am getting frustrated badly with this, i am running XP home ed. on an ACER aspier one, (say what you want but its practical) and as you can tell i am running live update/Symantec Endpoint Protection
and yes everything is up to date, i have waxxed the backdoor troj. with no prob. but i am needing help tring to fig. out how to solve this prob so i can make shure i completly killed the attack...thanx

A:No virus scan in safe mode or safe mode with netwrkg

Hi and Welcome to BleepingComputer,

Not all anitvirus programs work in safe mode, I don't know about Symantec but I do know my ZoneAlarm does not. I do not see the reason to run it in safe mode. If you are really wanting to run stuff in safe mode, run SuperAntiSpyware in it and just run your antivirus program in regular windows.

Btw, it sounds like you had something on there that has backdoor capabilities and if that is the case, then unless you reformat the computer, it will never be truly safe again.

Read other 11 answers
RELEVANCY SCORE 52.8

After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.

Safe Mode with Networking loads normally.

Any ideas or advice?

The computer is an Acer 4743G running Windows 7 Home Basic x64.

A:Cannot access Safe Mode but can boot in Safe Mode with Networking

Hello Zarmaki, and welcome to Seven Forums.

Since it will startup in "Safe Mode with Networking", you might see if using the tutorial below to troubleshoot may help to find a cause.

Troubleshoot Application Conflicts by Performing a Clean Startup

Hope this helps for now,
Shawn

Read other 1 answers
RELEVANCY SCORE 52.8

Windows just downloaded an update to my ASUS x83V laptop and now I can't get it to boot up. I've tried booting in normal mode, last successful mode, safe mode, safe mode with command prompt and nothing works.

If trying to boot in safe mode it gets stuck on crcdisk.sys. When trying to boot in any mode it eventually hits the blue screen with a STOP error of 0x0000001E. I have also gotten 0x0000007E and 0x00000024.

I am positive it's the latest Windows Update that caused this because my computer at work, which also runs on Vista and is also an ASUS, had an update yesterday. When I came into work this morning and tried to start up it was unable to and did a start up repair. That didn't work but it gave me a system restore option which did work.

Unfortunately my ASUS laptop does not prompt me to do a repair nor a system restore. The recovery disk I have that came with the laptop only allows me to do a restore which erases everything on my HD.

I'm only somewhat computer savvy; better at working with them than fixing them so please try to put things in layman's terms. Thank you!

Read other answers
RELEVANCY SCORE 51.2

I have a motherboard Asus p5k se/epu( intel p35 board). I felt that my sata drive emulated in IDE mode... So i want to fully utilize the sata drive in xp.

Therefore I follow the method provided by other forum's member.
http://forums.pcper.com/showthread.php?t=444831

But the problem is that my bios setting only have one option that allowed me to select.. which is IDE mode ONLY!!! Where is the AHCI mode ?

Or any of you have your own standard way to enable AHCI mode? teach me please...?

Read other answers
RELEVANCY SCORE 50.8

Hi guys,

My problem is somewhat complex so please bear with me. I had malware and adware on my laptop which was really annoying and I tried really hard to get rid of it. So I decided I was going to do a system restore. The system restore kept saying "System restore is initializing". I tried it three times and it didn't work. I looked around on the internet, and someone suggested to do the system restore while in safe mode. This is where I made my mistake. I set safe mode in msconfig.exe (not knowing you could go into safe mode while booting). msconfig forces the computer to boot into safe mode everytime, but my safe mode won't boot. I get a b;ack screen with a cursor. I have noticed that the cursor gets reset to the middle of the screen every five seconds or so. I also see the words safe mode flash in all four corners sometimes. I have tried re-installing windows 8.1 from a bootable usb, but whenever I change the boot priority, it doesn't seem to save my settings. Please tell me what my options are. Will replacing my hard drive do the trick. Thank you in advance.

A:I set safe mode in msconfig.exe and safe mode won't boot.

Can you restart and get into your log in screen ? If you can, enter safe mode by pressing the power button icon (lower right corner) then Shift + restart. That gets you to Advanced Settings where Safe Mode and, if that fails, Reset PC to orig settings. If you can't, try a hard reset by removing battery and all external usb attachments and then pressing and holding power button until it shuts down. Repeat a few more times to drain memory, then see if powering up will get you to log on screen.

A system restore in safe mode will just restore the malware. You need to boot into safe mode and run your anti-virus or malware program and have them quarantine and then remove them while in safe mode. Use Malwarebytes free or Adwcleaner or Hitman to clean the system. If that does the trick, manually create a system restore point that you know is clean after the system is to your satisfaction.

Read other 12 answers
RELEVANCY SCORE 50.4

Hi all,

I have just rebuilt a PC at home. Its a Packard Bell Pulsar 600. Ive upgraded the hard disk from a 5400rpm 10GB (IDE) to a brand new 7200rpm 160GB (IDE). I booted to a Win98 boot disk and used FDISK to create a new partition using the maximum capacity. Then formatted the disk and installed XP Pro SP2 fresh.

Everything is fine but the drive is only showing up as 127GB. Ive read that and been told that I need 48-bit LBA support for this but I already have XP Pro SP2. Shouldn't this already have this??

Damien
 

A:How to enable 48-bit LBA support on XP Pro SP2

the FAQs answer it all: http://www.techspot.com/vb/topic36678.html

you may need a BIOS update per FAQ
 

Read other 1 answers
RELEVANCY SCORE 49.6

Hello,
I'm using windows XP PRO on a network with Trend Micros as the antivirus. I can not enable bidirectional support in printers under ports. It is grayed out. I tried changing the settings in the CMOS, but to no avail. All the computers on the network are this way. We have windows 2003 server. We are installing a Zebra 2746e. This is a Dell Dimension 2.5. I could really use some help.

Thanks,
Corey
 

A:Enable Bidirectional Support

Have you tried downloading the latest drivers? Many times the print driver will enable the bidirectional support automatically.
 

Read other 1 answers
RELEVANCY SCORE 49.6

I am trying to install a USB device in my Windows 98. When I go to my device manager, I do not see a Universal Serial Bus controller option. How do I get this to appear?
 

A:enable usb support for windows 98

Make sure USB is enabled in your BIOS
 

Read other 1 answers
RELEVANCY SCORE 49.2

My notebook originally on Windows 8 but changed to Windows 7 ultimate which I have had no problems with for years, till the other day when entering my password I kept receiving error username and password incorrect. I am now getting error no boot drive found error 3F0. I have done a diagnostic test on hard drive and it passed. I have a Windows 7 ultimate disk but cannot get it to install. I have read that I need to enable Legacy Support but am unable to do this as I am cannot choose yes at the prompt, arrow keys do not move from the no position. Is there something else I can do or should be doing to get this to enable. Thanks

Read other answers
RELEVANCY SCORE 49.2

The next major version of VLC's venerable media player will support Google Chromecast. News of the addition was found in a recent VLC changelog that details the changes between version 2.2 and version 3.0 of the popular open-source, cross-platform media...

Read more
 

A:VLC 3.0 to enable Chromecast support across many devices

So if I decided to stream something to my tv with this device, bandwith gets used right? My ISP is comcast. Sadly.
 

Read other 6 answers
RELEVANCY SCORE 49.2

Im trying to run a packet monitor, and keep getting the error message: "unable to open raw socket" ....

Thanks!
freeware: analogx packetmon
 

A:Solved: need to enable raw socket support in xp pro

Read other 7 answers
RELEVANCY SCORE 49.2

Windows XP
500 W P/S
Radeon 9600 Pro PCI card
2.4 ghz AMD
2x 80 GB hdd

Hi, on an XP machine, I disabled Windows XP Help and Support Center a number of years ago (before SP2 came out) by disabling the Help and Support in services. I cannot seem to re-enable it. I have tried various 'fixes' found on the Inet but none seem to work.

Any ideas? Thanks.

Read other answers
RELEVANCY SCORE 48.8

I use Windows 7 Ultimate OS. The command prompt can't be opened in full screen mode(Shows the error msg when i press Ctrl+Alt:This system does not support full screen mode). But, in SAFE MODE i can run the cmd(command) mode in full screen.. If i install the XP mode Vertualization software,can i resolve this issue ? Bec, jus to work in command mode,i cant restart my laptop everytime to get into safe mode and normal mode.. And in XP mode, will my Windows 7 display changes to XP type ?
*Note: I also use a software called Turbo C++,which encounters the same problem of not supporting the full screen.. If i get into SAFE MODE, i can work in Full screen without any probem..
 

A:Why Windows 7 does not support full screen mode for command prompt like XP,is XP mode is the answer ?(Ultimate edition OS)

Hi,
 
The same question is asked and answered on the following thread:
http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/0f670f81-3302-4bc7-af34-8328ed69f153/#74c246c8-9fc4-4aac-8396-cee40a05e50a
Regards,
 Arthur Li - MSFT

Read other 18 answers
RELEVANCY SCORE 48.8

I have Gateway NE722 notebook (AMD APU A4-5000 based). BIOS version 1.07. OS Windows 10 64-bit Home OEM.Windows says that virtualization is disabled, Hyper-V support is enabled. I won't use Hyper-V but VirtualBox which don't allow to create 64-bit guests only 32-bits. So I assume that virtualization support is disabled in BIOS or Windows 10 Home block virtualization by enabling Hyper-V support and don't allow to use them in Home edition.I didn't saw the virtualization-related items in BIOS so the question is to use another Windows edition (i.e. Pro) or ask manufacturer to release BIOS patch that show option and allow to enable the virtualization support.Anybody knows about BIOS virtualization settings in Gateway NE722?

A:Enable virtualization support - Gateway NE722

not available on Home version:https://msdn.microsoft.com/en-us/virtualization/hyperv_on_windows/quick_start/walkthrough_compatibil... check this too:http://community.acer.com/t5/Knowledge-Base/Hyper-V-and-VT-x-BIOS-support/ta-p/380175

Read other 3 answers
RELEVANCY SCORE 48.8

I have Gateway NE722 notebook (AMD APU A4-5000 based). BIOS version 1.07. OS Windows 10 64-bit Home OEM.Windows says that virtualization is disabled, Hyper-V support is enabled. I won't use Hyper-V but VirtualBox which don't allow to create 64-bit guests only 32-bits. So I assume that virtualization support is disabled in BIOS or Windows 10 Home block virtualization by enabling Hyper-V support and don't allow to use them in Home edition.I didn't saw the virtualization-related items in BIOS so the question is to use another Windows edition (i.e. Pro) or ask manufacturer to release BIOS patch that show option and allow to enable the virtualization support.Anybody knows about BIOS virtualization settings in Gateway NE722?

A:Enable virtualization support - Gateway NE722

not available on Home version:https://msdn.microsoft.com/en-us/virtualization/hyperv_on_windows/quick_start/walkthrough_compatibil... check this too:http://community.acer.com/t5/Knowledge-Base/Hyper-V-and-VT-x-BIOS-support/ta-p/380175

Read other 3 answers
RELEVANCY SCORE 48.8

Hello,
How to enable AHCI support under vista famillial premium .
Nothing to do in BIOS.
Do i update to windows 7 8 or 10 ?
best regards.

Read other answers
RELEVANCY SCORE 48.8
A:Solved: how do i enable large disk support again?

In what context?
 

Read other 2 answers
RELEVANCY SCORE 48.8

Hello  Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thanks  

Read other answers
RELEVANCY SCORE 48.8

Hello  Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thanks  

Read other answers
RELEVANCY SCORE 48.8

By default, the NVIDIA drivers support OpenGL 2.1 and GLSL version 1.20. To enable developers to start coding to OpenGL 3.0, beta support for the OpenGL 3.0 and GLSL 1.30 feature set can be enabled with nvemulate.

NVemulate allows you to emulate the functionality of various GPUs (very slowly) in software. In addition, you can use it to control GLSL Support and Open GL 3.0 Support.

The OpenGL 3.0 and GLSL 1.30 feature set is only available on G80 and later hardware. This means the following GPUs:

Desktop: GeForce 8000 series or higher; GeForce GTX 260, 280; Quadro FX 370, 570, 1700, 3700, 4600, 4700x2, 5600
Notebook: GeForce 8000 series or higher; Quadro FX 360M, 370M, 570M, 770M, 1600M, 1700M, 2700M, 3600M, 3700M

To enable the enhanced GLSL functionality, select the ?G80(GeForce 8800 GTS, Quadro FX)? option from the GLSL compiler device support drop box and press the ?Apply? button. No changes to NVemulate settings take effect until the ?Apply? button is pressed. Pressing the ?Restore? button reverts the display settings to the driver?s current applied state.


As noted earlier, some graphics cards are not capable of GLSL or enhanced GLSL in hardware, so this may require enabling a higher hardware emulation level. (A minimum of NV30 for GLSL and a minimum of G80 for the enhancements)


If you do not see the WGL_ARB_create_context extension advertised, make sure of the following:


You are using a Release... Read more

Read other answers
RELEVANCY SCORE 48.4

I was browsing the internet the other day when I clicked on a link and my computer shut down. I immediately knew it was a bad link. My computer rebooted and it wouldn't let me on IE after that at all. I then did a restore to the previous day. I was about to get online so I went and downloaded Kaspersky IS and scanned my computer. My laptop messed up and rebooted itself. Then got Anti-Malware Bytes in Safe mode and ran a scan, still had issues Kaspersky not running right and my computer freezing after just a couple of minutes. Went back and did a restore again to the same spot and this time said forget Kaspersky and jsut did AMWB. It showed my computer is clean, yet about 2 minutes after booting, my computer reboots and the safe mode option pops up. I can run ok in safe mode but cannot get it to work in normal mode. I did trend micros housecall and another online scanner and all say my computer is clean. Yet, when I start IE, I am redirected on every link I click to scour..... or another site with links on it. Any help is greatly appreciated, as well as a recommendation for a better Anti-virus. I jsut had McAfree that came with this laptop. Thanks!






.
DDS (Ver_2011-06-12.02) - NTFSx86 NETWORK
Internet Explorer: 8.0.7600.16385
Run by Mom at 1631 on 2011-06-20
Microsoft Windows 7 Home Premium 6.1.7600.0.1252.1.1033.18.2812.1805 [GMT -4:00]
.
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes =... Read more

A:Only runs in safe, redirects even in safe, reboots in normal mode..no virus' found

oh and Malwarebytes did block a 91-207-192-22 port 49179 svchost.exe

Read other 9 answers
RELEVANCY SCORE 48.4

Hi Guys n Gals , my name is Mark , I have an old laptop I am trying to get going , it has never been online so its not a virus , and the cd rom does not work , and no USB sticks have ever been plugged in all it was used for was playing bejewelled the old one and windows games , not pad then kind of tasks . once shut down moved to new place , unpacked , it would not start up.   by this I mean ... the screen that shows up usually after a improper shut-down .... Safe mode ... Safe mode with network .....  Start windows normally ... that screen ...  no matter what selection I make it freezes there and I can no longer move or alt cntr del ... nothing works .. power button . also Its so old i cant figure out how to boot from usb as the cd rom does not work . I thought I figured it out , but it kept bringing me to the start normally ,,, safe mode ... safe mode with networking screen after 15 seconds of black screen , witch is the reason I thought it was working because generally when I boot other computers the screen goes black with the small flashing thing in the corner for a few seconds then starts booting windows , but this one brought me to that menu then froze ...   
here is a pic of the menu i speak of .
 
 ACER TravelMate 4000 Series MODEL: ZL1
 
Thank you very much for reading my post!
 
Mark

Read other answers
RELEVANCY SCORE 48

I am running XP Pro, and last month I paid a local tech to format and reinstall for me, because I wanted to save time on the reinstall. My OEM CD is only SP2, and the tech had SP3 slipstreamed on a CD. The installation went without any problems, but now I can't enablre Indic language support because the installation process keeps asking for the SP3 CD and I don't have it. How do I enable Indic language support without the SP3 installation media?

I ended up slipstreaming SP 3 anyway.
 

Read other answers
RELEVANCY SCORE 48

Hi,

I have a Microsoft Surface Pro 2 and I am running Windows 8.1 Pro Update 1.

I have been unsuccessful at building a WinPE image that provides BitLocker support. I searched around the internet and found many posts. Eventually, I ended up trying to build it with the various added packages I discovered in the various posts. However, in the end, none worked and this is the message I am getting after booting into my WinPE environment:

manage-bde.exe - Application Error

The instruction at 0xa20afa3b referenced memory at 0x0000013d.
The memory could not be read.

Click on OK to terminate the program

Here are the commands I eventually ended up using to build my WinPE image:

Code:

dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-WMI.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-FMAPI.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\WinPE_OCs\WinPE-SecureStartup.cab"
dism /image:C:\boot\macrium\mount /add-package /packagepath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation ... Read more

A:How to enable BitLocker support (unlock drive) in WinPE 5?

I resolved the issue, but here's how I got to it:

1) I even tried using the 8.0 ADK, but I still got the same error.

2) At one point during my troubleshooting, I stopped just prior to performing the Commit to create the WinPE image. Then I navigated to the <mount directory>\Windows\System32 and ran manage-bde.exe. The result: A Windows error (something to the effect that the program crashed/stopped working).

3) I tried running Notepad.exe and it worked fine.

4) I compared the manage-bde.exe from my mount directory to the one in C:\Windows\System32 using the comp utility and they were identical.

5) I have always been able to run C:\Windows\System32\manage-bde.exe. So I created a "temp" subdirectory in my mount directory and copied C:\Windows\System32\manage-bde.exe. When I tried to run it, I got that error (program crashed/stopped working).

6) Running it from the C:\Windows\System32 directory, however, worked without any issue. This led me to conclude that it required some dependent files in C:\Windows\System32.

7) After a bit more troubleshooting, I discovered that in order for it to run, it needed something in directory C:\Windows\System32\en-US\. I copied that folder I into my "temp" folder on my mount directory and then manage-bde.exe was able to run without any issues.

8) Final solution was to create a subdirectory called "BitLocker" in <mount directory>\Windows\System32, then copy C:\Windows\System32\manage-bde.exe... Read more

Read other 1 answers
RELEVANCY SCORE 48

I am running XP Pro, and last month I paid a local tech to format and reinstall for me, because I wanted to save time on the reinstall. My OEM CD is only SP2, and the tech had SP3 slipstreamed on a CD. The installation went without any problems, but now I can't enable Indic language support because the installation process keeps asking for the SP3 CD and I don't have it. How can I enable Indic language support without the SP3 installation media? I asked this at the Microsoft newsgroups and was told that I needed to slipstream a CD myself. Is this the only way?

A:[SOLVED] XP Pro: Enable complex script support without SP3 media?

I did end up slipstreaming SP3 after all.

Read other 1 answers