Over 1 million tech questions and answers.

Ideapad - 110 - 15ACL - 80TJ No audio opt. from Combo Audio Jack

Q: Ideapad - 110 - 15ACL - 80TJ No audio opt. from Combo Audio Jack

¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ I have an Ideapad 110-15ACL=80TJ .¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ I have been trying to use the Combo Audio jack with zero results.I am using a Dynamix 3.5mm Y cable with mic and headphone plugs for PC.The input plug to Combo Jack is tip- ring ‚?? ring ‚?? sleeve. One jack socket codedwith a black sleeve (assumed to be for headphone)Jack socket with red sleeve assumed to be Mic.My problem ‚?? I cannot get any audio opt¬ no how .I need help pronto.Btw. The Y cable input jack plug to the Combo Audio seems to me to be quite a loose fit. Is this normal?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Ideapad - 110 - 15ACL - 80TJ No audio opt. from Combo Audio Jack

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 130.8

I find my Ideapad 110-15ACL-80TJ lacks audio output. I decided to use my working stereo amp from a previous desktop¬  installation, to get more power, taking the signal from the Ideapad¬  combo audio jack socket. I purchased a Dynamix 3.5¬  mm Y cable¬  with mic and headphone jack sockets with tip-ring -ring-sleeve jack plug to insert in the combo socket.¬  But It does not work at all. Even the Jack plug doesn‚??t¬  seem to locate into the combo jack nice and firmly. What am I doing wrong?¬ 

Read other answers
RELEVANCY SCORE 116.8

Hi all, New to the forum and hopefully someone can help me out. I'm trying to setup a system that will allow me to record meetings.  The setup has the mics and speakers going into a mixing desk.  I can get the sound to come out of the laptop into the mixing desk and out the speakers fine, but when I try to hook up the mixing desk so that the sound is coming into the laptop using a combo audio adapter the quality is just unusable. What I need is:The ability to play audio from the laptopRecord audio on the laptop through the built-in mic isn't good enough quality.It will also be used for Skype so that people who are at home can join a call and hear the meeting. Anyone got any idea on what's wrong going wrong?  If the audio jack isn't going to do it what are my other options? Thanks Alex

Read other answers
RELEVANCY SCORE 115.6

Is it possible to upgrade the amd a-6 7310 2.0g to a faster processor?

Read other answers
RELEVANCY SCORE 115.6

I need to record audio direct to mp3 on a regular basis on my Ideapad 510, which has a combined audio input/output jack. My signal source is a line output from a mixer. I have tried just plugging this in, but there is no input option on record other than the laptop's internal microphone. Although it does record, the sound is very distorted, presumably as it is only picking up from the internal mic.I understand the answer is to use a splitter to plug the line-in cable into - however there are many available, and they appear to be wired differently. Can anyone tell me the correct wiring for this combi jack, and does anyone know of a commercially available product that will do the job. I have looked at Headset Buddy website, but not sure which product would be the right one for this laptop. I know that a usb audio interface would also do the same job, but a splitter cable is a much cheaper alternative.

Read other answers
RELEVANCY SCORE 94.4

I want to use my headphones for sound only and use the internal microphone for speaking, but my computer (Omen Laptop 15t) has a combo jack. How do I make it recognize my headphones as only headphones and not as a microphone also?

Read other answers
RELEVANCY SCORE 93.6

(1) Low audio opt. which I am living with(2) If I ever need to  remove the battery it's a major dismantling job - not what I'm used to.(3)  When opening the case lid it's awkward because there is really nothing for my fingers to grip onI would like to compare notes with other users.

Read other answers
RELEVANCY SCORE 93.6

I am currently using an Asus laptop with windows 8.
The laptop only has 1 usb port and an audio combo jack.

I have bought several headsets with mics with either the combo audio cable or one with the 2 cables and used s connector to plug them in to the audio jack and the mic won't work. The headphones work fine and sound great but no matter what I do it will only pick up the mic that comes installed on the laptop.

This is not a problem if I use the usb port but that is no longer an option since the tracpad has stopped working.

I've tried several solutions I've seen posted on the forms and so far nothing has worked. Is this a lost cause for me?

Read other answers
RELEVANCY SCORE 92.4

Hi Guys need help with the sound on my lenovo G50-70 . Sometimes when i insert da headphones in the jack plug , i get no sound. I have to restart de computer a couple of times before solving the problem.. thanks jv 

Read other answers
RELEVANCY SCORE 92.4

I have just bought a HP Pavilion 15 n-278sa laptop. It comes with a single 3.5mm port which is used for both audio out and line in. The laptop will work fine when outputting sound through the jack and a pair of headphones. However when i try to use the same port as a line in to record sound from an external device i am having some problems. I am trying to connect my mixer to the laptop using a standard lead, red & white one end and 3.5mm jack on the other. At first I was not getting any change whatsoever under the Recording tab in Sound settings. It just says 'not plugged in' under the microphone. After doing some research I found that the lead I was using, a 3 section plug, would not work and that was the reason there was no change when i plugged it in. I bought a 4 section plug & eureka, the laptop recognised the lead & showed this on the Recording tab. I thought my problem was sorted but this was not the case at all. As soon as I plug the red & white end of the lead into the output on the mixer, the laptop screen displays the 'not plugged in' message again as though I have unplugged the lead at the 3.5mm jack end. This makes no sense to me whatsoever?!? How can it recognise the lead is plugged in with no problems but then go back to not recognising it as soon as the other end is plugged into an external output?! Surely there must be a way of rectifying this as currently its impossible to record any sound on the laptop from... Read more

A:Headphone & Microphone Combo Audio Jack

Hi dave_holmes, Welcome to the HP Forums! I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand you are trying to connect your mixer to the notebook. After connecting  the appropriate adapter  it was showing correctly. Once you connected the mixer it disappeared. Here is a link to YouTube, which has  a selection of videos on connecting a mixer to a notebook or laptop, that may assist you.YouTube /connect mixer to laptop As it was seen correctly before you connected the mixer, the notebook is working correctly. You will need to contact the manufacturer of the mixer for instructions on connecting it to a notebook with one input/output port. 

Read other 9 answers
RELEVANCY SCORE 92.4

I have discovereed, when using the single combo jack on My month old Lenovo u30-70  the sound will work on the headset,  but not the mic. (typical audio headset for phone) i have tried 3 different headsets, but none work. the microphone on the front of the laptop works.
 
I need to use the combo jack for skype. 
 
Solution?  thank you! 
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

A:U30-70 - Combo audio jack microphone not working

If other people have this problem, I had to send it back to Lenovo. they installed a new card. Apparently it was broken when it left. thankfully it was still under warranty. 

Read other 1 answers
RELEVANCY SCORE 92.4

My laptop only has one combo audio/microphone jack, and I can't get the microphone to work at all. I just bought a new headset that came with an audio/microphone splitter specifically for the purpose of using it on this laptop. While the output works fine, the microphone input is absolutely ignored.

I am 100% positive this is an audio/microphone splitter (and not just an audio splitter) as it has 3 rings on the end of it (indicating that it is compatible with using a microphone), and one of the input jacks even has a microphone icon on it. Realtek Settings are nowhere to be found in Control Panel, and I couldn't seem to find anything in the system sound settings that would help me either.

I've already spent money on this new headset, so as you can imagine I'm pretty frustrated that this is not working, and I really, really don't want to spend any more money. Any help would be greatly appreciated.

A:Microphone not working with combo audio jack

Does anyone have a solution?

Read other 5 answers
RELEVANCY SCORE 92.4

How is the microphone jack on the front panel wired? I was told this jack works as Microphone and LINE IN. Is the jack a 3-pole stereo jack or 4-pole jack? If it is 4-pole, does it comply with CTIA standard wiring (Ring2 is common and Sleeve is microphone)?

Read other answers
RELEVANCY SCORE 92.4

Hi Forum! I have a new T470. From the Specs I can see itīs equipped with 4 pole, 3.5mm (TRRS) jack combo.  I tried to plug old/basic earphones and it seems they are not recognized at all, sound continues to come out of laptop speakers. Side note, earphones work fine on phones, they are 4 pole, 3.5mm as per picture. Any hint on whatīs the problem? Thanks!  


























pic.jpg ?66 KB

Read other answers
RELEVANCY SCORE 92.4

I've just got a new 5567. As mentioned in other threads I do have the stiff jack issue but is fine once you get the knack. I had originally Disabled Waves MaxxAudioPro to reduce what was running but Enabled it again which means I get a pop up screen when I plug something in asking if it is say mic OR headphones. I have an external splitter lead which claims to handle both mic AND headphones. Is this feasible on this machine? Way round is a USB audio device.
For me the reason this is crucial is at my church. My old laptop had 2 jacks In and Out. We could say play a backing track which goes OUT to a mixer desk and then comes back In with vocals added for recording. Any other ideas?
Thanks

A:Inspiron 5567 Combo Audio Jack

andrewdeacon51I get a pop up screen when I plug something in asking if it is say mic OR headphones
There is no option to select "headset"?
In addition to the popup, open the Windows Sound dialog, on the recording tab, and make sure that "microphone" is enabled and selected as the default device.

andrewdeacon51I have an external splitter lead which claims to handle both mic AND headphones.
The splitter is supposed to work that way, but very often the mic part of them won't work. It could be because laptop audio ports sense the presence of a microphone by its impedance, and the adapter could be interfering with that process.
andrewdeacon51Way round is a USB audio device.
A usb interface or audio jack would be a good workaround, because then you eliminate bothl the problem with the Realtek/Waves popup, and the problem of using an adapter with the combo jack.
andrewdeacon51For me the reason this is crucial is at my church. My old laptop had 2 jacks In and Out. We could say play a backing track which goes OUT to a mixer desk and then comes back In with vocals added for recording. Any other ideas?
That setup in combination with a combo jack is less than ideal. Even if you get the microphone function of the combo jack to work, it is still just a mic jack and would produce a mono recording. On your old laptop, the audio input jack might have doubled as a mic jack and a line-in jack. Most of the Dell laptops used to have that feature. Modern laptops no longer... Read more

Read other 1 answers
RELEVANCY SCORE 90.4

Hello community. Just got my 7567 and cannot get my microphone working when i use the combo audio/mic jack. Try 2 pairs of headphone apple and beat with microphone, sound come out great but the microphone dont work. I receive the popup from maxxaudio pro asking what i just put in but no option for combo mic and sound. I did check the Maxxaudio main setting, dident see anything related to mic. Need some help here. Thx you all for your time.

A:Inspiron 7567 microphone not detected on combo audio/mic jack

Mine seems to be working.. I tested it with the Voice Recorder.  The volume levels did not show in the Recording devices dialog window.  If you have a specific utility, someone may have experience with it..
The Jack was a little hard to plug in, possibly first use but there should be not barrel of the plug showing.  When you plug it in the popup allows you to choose the Headphones and size then hit OK.  The system will sense a microphone is available.

Read other 1 answers
RELEVANCY SCORE 90.4

I am one of those unfortunate souls with a laptop that has a single jack both for audio output and microphone input. When I plug a lapel mic into it, the computer doesn't even notice it's there, and keeps making me use its crummy internal mic. How do I persuade it to check to see if maybe I have an external mic plugged in? If I had a dedicated mic input jack, I am fairly confident it would work.

I've heard a lot of people struggle with this single-jack thing. What do I do? Thanks.
 

A:Solved: Using external mic with combo audio input/output jack

Read other 12 answers
RELEVANCY SCORE 86.8

Anyone experienced here audio problems in the unit? When plugging back in the audio jack there will be no sound at all heard at headset? But when the first time use like if after restarted the audio in headset works fine? PLease help... Ty

Read other answers
RELEVANCY SCORE 86.8

My laptop audio jack doing funny things....auido jack is not working after pull it off and again connected to the laptop every time i need to restart to hear the audio from audio jack

Read other answers
RELEVANCY SCORE 83.2

It is a new laptop, but when i insert my headphones into the correct audio jack, it just wont go all way as if the jack is too small. 

Read other answers
RELEVANCY SCORE 79.6

hi 
im using dell inspiron 15-3521 whenever i connect earphone/headphone to my laptops jack only the left side of the speaker work right side has no sound (inbult laptop speaker works fine).my friend asked me to download (0005-Win7_Win8_Win81_Win10_R279) driver from realtek web site and  I installed it and the problem was solved and this was about 6 to 7 months back
but now im facing the same problem i did the same what i did last time  i downloded and re installed the driver but of no use the problem still presists.
so plz guide me what to do to solve the problem.
thank you umesh.

A:audio problem when earphone/head phone is connected to 3.5mm audio jack

Test by switching between the Realtek audio driver and the Windows native audio driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked.7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, then no need to restart.[To get back to the Realtek driver, do it again but reverse the names in steps 2 and 7.]
If it still does not work correctly when the native driver is installed, then the hardware in the headphone jack has failed.
But if the same problem is there with the native driver then you should install a different version of the Realtek driver. I might be able to direct you to one but would need to know which operating system you are using.

Read other 10 answers
RELEVANCY SCORE 79.6

Hello,

I have Windows 7 Ultimate 64 bit and I have a problem with sound. When I plug my speakers in front panel I have output audio, but in back panel I don't.

My Audio Manager looks like this, but front panel is enabled and back panel is disabled. It does not recognize back (ANALOG) jack.


I tried with settings in this manager but without success, I cheked Control Panel > Sound and followed instructions but still no sound if speakers is in back panel. What to do?

P.S
Sorry for bad english

A:No sound in back audio panel jack - Realtek HD Audio Manager

What is set as the Default Playback Device? If "Digital" or "HDMI" is set as default you will not get any sound from rear audio connections. "Speaker" must be set as Default Playback Device/

Read other 7 answers
RELEVANCY SCORE 79.2

want to send audio to computer audio system - need diagram for (4 ring ??) jack plug circuit

Read other answers
RELEVANCY SCORE 79.2

How can I uninstall Dell Audio and only have the legacy Realtek Driver and Software in my XPS 14 (L421x)?
I installed some time age the default audio driver that I got from "Dell Drivers", this installed the "Dell Audio" + "MAXX AUDIO 4". I already uninstalled this thing, run CCleaner, deleted the folders, and downloaded and installed the legacy Realtek R 2.73 driver, but this thing (Dell Audio) is always installing with the driver.  
My system audio is ridiculously loud. I need to put my system audio in somewhat 5~15 / 100% to get "normal audio", the only way I get realistic "normal audio range" is using my SteelSeries Wireless Headset with USB, this way the system audio goes to 100% automatically and I control the audio with the scroll located in the headset, even in 100% max audio, I get a "normal 100%", it's loud, but not EXTREME like the notebook audio!
Another problem, when I plugin my Apple Earpods, they simple doesn't work, I already tested them with tons of devices at home, and they are working great. The system doesn't even recognize them.
I think that everything would be resolved if I could install the Leagacy Realtek drivers & software, not this *** loaded with bloatware from Dell, I don't care about "MAXX Audio", "MaxxSense" and all this BS. If you look with attention, all the settings located in this "Dell Audio" menu are the same in the Real... Read more

A:Dell Audio + Headphone Jack + Loud notebook audio

I forgot to mention in the main post, and I can't edit it, so here it goes:
First, Sometimes I need to run LiveUSB Linux distros in this notebook, and the audio in them is all great, realistic audio range, 100% loud but not extreme, everything OK.
Second, I'm using Windows 8.1 Pro up-to-date.

Read other 5 answers
RELEVANCY SCORE 79.2

Hello
I have XPS 9560.
I am not happy with how Maxx Audio amplifies my speakers - it seems to overamplify them and then they resonate with the chasis, producing an annoying distortion every time I watch a movie or a tv show. I turned off Maxx Audio profile and it didn't help.
I then disabled Maxx Audio service and service application in startup, and the sound is now good, however, now when I plug in my speakers into the headphone jack, the audio is no longer routed, and the laptop always outputs  audio through internal speakers. Also, that annoying audio switching popup no longer shows up.
So - how to disable Maxx Audio, while keeping audio routing functional?
PS. I would appreciate not to be asked questions like is my Windows updated, are my drivers up to date etc. Support engineers should already be aware of this problem given how well documented it is.

Read other answers
RELEVANCY SCORE 78.4

(Not sure if I am posting in the right place, move me if necessary)
 
Hello BleepingComputer
 
I just upgraded my computer a few days ago, and I am having problems with the Front Jack Audio/Headphone.
 
Normally, I set my Headphone to run simultaneous with my Speaker with Realtek HD audi/Stereo Nix (Disable Front Jack Detection and vice versa), and I could change the volume on both devices separately.
But since I changed the motherboard, when I have realtek installed, it doesn't have the Headphone setting in Sound/Playback.
The headphone work perfectly, but its linked to the Speaker's volume, which is really annoying.
Also, the Realtek layout changed from the last one I got, and doesn't have the "Disable Front Jack Detection" option.
(Picture: http://i903.photobucket.com/albums/ac232/notyellowasian11/Untitled-1_zps2242cdba.jpg)
 
So far, I have tired..
Installing an older version of Realtek driver;
Changing the audio setting in the BIOs (HD or AC97)
Changing the audio connector on the MOBO (Hd or AC97)
Tried multiple compinations with Realtek HD audio manager settings.
Cleaned every plugs/jacks related on that.
 
So far, I couldn't been able to get the Headphone tag at all when Realtek is installed.
 
Thanks !
 
---
Here's my spec:
MOBO: ASUS P8Z77-V LX
Audio: Realtek ALC887 (MOBO default)
CPU: Intel Core i&-3770k 3.50Hz
RAM: 2x 8 GB DDR3 Corsair
GPU: Nvidia GeForce 9800 GTX+ 512 MB
OS : Windows 7 Ultimate 64x
 
Current Audio Driver... Read more

A:Headphone/Front Jack Audio w/ Realtek HD Audio

could try ....
 
Control Pane>View by category>Hardware and Sound>Manage Audio Devices>(select device)>configure
 
It's  a long shot, I know. Just putting it out there.

Read other 2 answers
RELEVANCY SCORE 78.4

omg, I was switched to a different pc at my job and the person there previously downloaded realtek to the pc and im having a problem with the headphones, when i put the headphones in i get a pop up confirming the action but im still hearing music from the speaker...its really annoying because im use to just pluging in the headphones and everything being normal...im not even sure why she downloaded this program, anyhow if you can please help, i need my music to keep me sane at work, its sooo ver depressing. the operating system is microsoft windows xp
 

Read other answers
RELEVANCY SCORE 78.4

I am using a Logitech 2.1 mini jack audio system. Audio sounds quite bad. It's like sometimes it's out of phase and sometimes sounds like it's being dithered.
Windows 10 is running without audio enhancements. Audio is from any source. AIMP, FIrefox/YouTube, Pot Player.
I have up/downgraded audio drivers and problem remains.
Any suggestions to fix the problem are welcome.

Read other answers
RELEVANCY SCORE 78.4

I had audio issues, speakers would intermittently not work.  I upgraded the driver to sp76702 per the following advisory: -------------------------------------------------------Document ID: c05288869Version: 1Advisory: HP EliteBook and ZBook G3 - Audio Not Working After Reboot, Speaker Icon Has Red X------------------------------------------------------- After the upgrade, I can no longer get audio through my docking station or the speaker jack on the right side of the laptop.  Tested my external speakers with a different source (smartphone) and they work fine.  I submitted a case today with HP.  

Read other answers
RELEVANCY SCORE 78.4

My internal speakers seem to work fine but I can't get the sound to go into my headphones when I plug in my headphones. Is there a way how to fix this?
 

A:Problem with the Headphone Audio Jack with realtek HD audio

Read other 10 answers
RELEVANCY SCORE 77.2

Have an HP Pavilion dv7 using Windows 10. Unable to get any sound from audio out jack. Noticed it after recent Windows 10 update? Would appreciate any advice. Sorry if this has already been discussed. Headphones work with my Apple I Pod, so don't think the headphones are the problem. Larry
 

Read other answers
RELEVANCY SCORE 77.2

Hello. For a while now, my headphones that I usually plug into the audio jack are not working at all. I have tried several headphones, but it makes no difference. The only way audio will come out is through a usb headphone, usb adapter, or through the speakers (and also come out of the headphones at the same time) . I've downloaded and redownloaded my audio devices and I'm completely frustrated at this point. I've noticed that my speakers are set to go through the audio jack as well, and thought disabling them would stop this problem. But I was wrong. Nothing. I'm slowly getting more and more annoyed as the days go on without an answer. Please, I just need an answer. I need my headphones to work again. I've been having way too many problems lately, but this is by far the worst. The weirdest thing is, for about a few days it was magically fixed after an update, but reverted!? I don't understand, and I can't stand it anymore. Thank you.

Read other answers
RELEVANCY SCORE 77.2

hi guys pretty new here so take it easy plz (lol)

i have 2 problems regarding audio.

1. when i upgraded my pc i added a okish motherboard but i wanted sound from my front panel so i took the jumper cap off the prongs for audio but now i have added some desktop speakers and want to plug them into the back of my pc but cannot remember which prongs to put the caps back on anyone any ideas plz.

now the hard one

2. i have a sapphire radeon hd4650 1GB graphics card inserted into my pci-e x16 slot on my motherboard and have a lcd monitor connected on the vga port and a full hd tv/monitor connected via HDMI port to hdmi port1 on tv. the picture is class when i have movies playing or game running but i dont have any sound what so ever. if i want to watch a film i have to connect my tv to my graphics card via the vga port and watch it like that (pointless having it connected via hdmi if i have no sound).

i have been trying since december to get it working but to no avail.

(what i have tried)

i did a fresh install of winxp installed all drivers needed, installed ati drivers from g/c driver cd then installed ati hdmi audio driver from amd site then the realtek hdmi driver and the microsoft uaa driver, and guess what no hdmi audio.

next i formatted and the installed windows vista did the same except the uaa driver as this was not required. and still no sound from hdmi.

lastly i installed windows 7 home premium. installed the latest ati drivers and the ati hdmi driver and... Read more

A:No audio from rear jack & no hdmi audio

I'm pretty certain that there is a cable that you have to connect from your sound card to your gfx card...

Sound over HDMI from GPU

If you have a Radeon HD 4xxx series or newer it should be setting up your HDMI by itself, though you may need a driver from the website. http://ati.amd.com

Also, check to make sure that when you're hooking up to your TV via HDMI that your sound options have HDMI/S-PDIF as default...





Quote:
In your sound control, located in the control panel, be sure that the hdmi device is set as the default. The hdmi device choice will be there if you're plugged up to your hdtv.

Read other 3 answers
RELEVANCY SCORE 76.4

 So I was in this website (dashboard.zopim.com) for working purposes and whenever I get a chat request there's a sound and somehow my computer stopped with the sounds. I restarted the computer and there was a mute symbol in the audio, and I got really surprised when I tried to unmute it and got a message like "there is no audio installed" . I went to the system settings and saw that 2 icons - Intel High Definition DSP and Intel High definition display audio had a yellow mark. I went to Lenovo's website and downloaded the driver and it didn't work. Then I found some instructions on microsoft's website. It worked but then I had to use the site again and... Not working! I made it work again but now there's a delay. Sometimes there's no delay on the sound and sometimes there's about 5 sec. Please, help!!!!!!!!!!!!!!

Read other answers
RELEVANCY SCORE 74.4

Hi, On my HP pavilion notebook the end of the headphones is stuck in that jack, currently I have a tool coming to repair that. Is there a way I can disable my audio jack. Headphones is not coming up in playback devices. The only thing that is is. Speakers/HP. I tried installing realtek software it will not install. It says it is installing the headphones than I switch it to the speakers as the default but then it switches back to the Speakers/HP. Will someone please help?

A:Need To Disable Audio Jack (B&O Audio)

The audio jack implies speakers or headphones can be plugged in to that jack.

If the notebook has an HDMI port, then a TV can be plugged into that and you'll have a different option to output audio to.

Read other 0 answers
RELEVANCY SCORE 74.4

I have an X1 Yoga and can't get sound to record when it is coming in via the microphone jack.  I've plugged various devices into the X1 Yoga via the audio port, such as an iPhone, using a standard audio cord, but when I'm in the Windows 10 "Sound" control panel (on the "Recording" tab), the green sound meter doesn't move, suggesting there is no sound in. With my prior PCs running Windows 7, there was always a "Line in" option but that doesn't appear on my X1 Yoga running Windows 10. Separately, I'm docked to a ThinkPad OneLink Plus Dock, which appears in the Windows "Sound" options (it shows up as ""ThinkPad OneLink Plus Dock Audio"), but it displays as "Not plugged in" even when I plug in an audio cord. I've attached a PDF screen shot, with the two items above circled in red.


























X1 Yoga Audio Jack Not Functioning.pdf ?62 KB

Read other answers
RELEVANCY SCORE 74.4

My self built computer recently had a change of motherboard, I now have a Asrock N68C-GS FX.

The front cases' and computers back audio jack are not working, I have tried numerous headphones and speakers.

However my USB headset works perfectly. My drivers are all up to date, I'm struggling to think a reason why it's not working.

Any help greatly appreciated.

Thanks, lee.

A:Audio Jack not working, but USB Audio is.

I would check your motherboards connectors, check your manual for audio connections

Read other 9 answers
RELEVANCY SCORE 73.2

Hello,My problem is this: I have an old  set of speakers such that the left speaker eventually stopped working.
Upon taking it apart, turns out the wire was just pulled away from the solder to the pins.I replaced the wire and it was good as new.
After a few months of use, (once in a while use) the left speaker "stopped" workingI later discovered that it still works, but is very very quiet.Such that, I have to set the right speaker balance to 9% and left to 100% to get the same volume from both speakers.I took it apart today, re-glued the wires back to the pins, no difference.
So I am wondering, with Dell Audio client, and my Dell xps 8700, which has a front and back 3.5mm audio jacks, can I set the balance to the front port to be my 100/9 for the speakers, and 100/100 for the back which connects to my headphones?
I took a look in the audio client, but it looks like no such option exists.Do I go looking for a new set of speakers or is there an easy option here?

A:Can you change the balance output on a specific audio jack output with Dell Audio?

I believe both jacks are controlled and connected to the same ports and software so directing one to do one thing and another to do something different isn't possible as far as I know.  Maybe someone will have a different answer, but I don't think Dell's software is advanced enough.

Read other 1 answers
RELEVANCY SCORE 72.4

Well my jack is broken since a few months so no joy for me... I hate it now when I can't listen to my music on my 14 speakers in my room. (NO KIDDING LOL) And today I was thinking about... HDMI... Audio?! Yes, but - I don't want to cut my only one hdmi cable which my parents use. So, I thought maybe my USB 2.0 port can emit audio, I have some spare USB cables lying to throw out, could I make it possible to connect a 3.5mm jack with the USB to the white and green cables? (USB pinout and wiring @ pinouts.ru) I don't care if it will be mono sound or stereo, I just want sound in my speakers again
Also I don't know If I had to post this in the Hardware & Devices section but I personally think this question fits better here.

P.S.: I think I'll need some software.. if yes: I am running Windows 7 Home Premium 64 bits SP1 on a Acer Aspire 5742G Intel i3 370m 2.4ghz , 4 gb ddr3 ram, ATI Radeon Mobility HD 5470 512 M GDDR3, 2 free usb ports on the right side, 1 for the mouse on the left, HDMI Ethernet and VGA on the left side (+ power source adapter which also was broken but I've fixed it).

Edit2:
Btw, I don't want to(Well.... Can't) spent any $$$ on any adaptors now...

Edit3:
Well else I will have to get the screwdriver, openup the laptop and connect some wires to the laptop speaker... But that's the last thing I want to do. If nothing else will help.

A:Can I Directly output audio from USB to 3.5mm jack?(My jack is broken)

You will need an adapter.

Read other 2 answers
RELEVANCY SCORE 71.2

Hello my dear fellow windows 7 users!

A few days ago, one half of the jack of my external speakers got stuck in the female jack of my PC laptop.
I am using Realtek HD audio, and I wanted to ask whether it is possible for me to somehow disable the jack and have my audio played through my normal inbuilt laptop speakers, seeing as I will be needing audio from my computer as soon as possible.

Here is a snapshot of my audio devices - and as you can see the speakers and headphones are under one device so I can't switch between the two..


Please help
Thanks alot.

A:Audio jack stuck in PC input jack...?

You will need to get the broken piece out. Sometimes a strong magnet will dislodge it. Some RealTek's have a control panel that will allow you to reassign jacks, but I don't know if that will even do you any good.

If you have one it will be located in Start/Control Panel/Hardware and Sound.

Read other 1 answers
RELEVANCY SCORE 71.2

please help,

My headfone jack (incorporated on the motherboard) is broken, and I bought a USB adaptor to conect my head fones, but it has a low quality.
I came to know that it's possible to switch the microfone jack to use it has a audio jack, but I cant figure or research how. I use windows home premium 64bits.

appreciat any RE.
tks

A:how do I switch micro jack to a audio jack

Some, but not all, have the capability to reallocate jacks. If you have RealTek, the RealTek HD Audio Manager that is located in the Control Panel/Hardware and Sound Panel is where its located (but not on all RealTek's). If you have some other on-board audio check to see if there is a simi;ar Audio Manager and the options.

If there is no jack reassignment available for your PC/motherboard you can use the rear Speaker jack for headphones. Some also have a "Line Out" and you can also use that for the headphones.

Read other 6 answers
RELEVANCY SCORE 71.2

Hello my dear fellow windows 7 users!

A few days ago, one half of the jack of my external speakers got stuck in the female jack of my PC laptop.
I am using Realtek HD audio, and I wanted to ask whether it is possible for me to somehow disable the jack and have my audio played through my normal inbuilt laptop speakers, seeing as I will be needing audio from my computer as soon as possible.

Here is a snapshot of my audio devices - and as you can see the speakers and headphones are under one device so I can't switch between the two..

[IMG]http://s13.**************/4acoxik13/help.png[/IMG]

Please help me guys thanks alot

A:Audio jack stuck in PC input jack...?

There is a contact switch inside that audio port that switches the built in speakers off when a jack is inserted.
This is a physical switch so the issue is hardware. I doubt there will be any software solution for it.

So your mission is to remove that broken jack. If you are uncomfortable taking a laptop apart you might consider taking it to a repair shop.

Read other 1 answers
RELEVANCY SCORE 70.8

conexant smart audio multistream not working.audio by harman app is also not working. usually when it works a visualisation effect is shown. now the effects are not showing and audio enhancement from the app is also not coming

Read other answers
RELEVANCY SCORE 68.8

 My HP Probook 450 G2 suddenly stopped playing music through my headphones and keeps producing sound through the speakers. No set of headphones works on my laptop, but they do work other devices.  RealTek HD audio drivers are up to date. I've tried reverting back to High Definition Audio Device on the Device ManagerI've uninstalled RealTek HD audio manager from the Task manager startup. I've disabled play-back multi streaming.I've unchecked the enhancements from the DTS sound +I've done a system restore to right before I updated my drivers and on a specific day that I knew my earphones had worked - still nothing.  Nothing works, every time I plug my headphones in and play something the sound is played through the speakers.  I also connected a monitor to my laptop. I've uninstalled and reinstalled the drivers with with the screen plugged in and out. It makes no difference. The sound comes from the laptop's speakers.  (The extra monitor has no speakers) Please can anyone help me? It is extremely frustrating that I cannot fix this issue.

Read other answers
RELEVANCY SCORE 68.4

Been searching for the maximum RAM I can install. Lenovo companion says I have 8GB of 32GB Maximum When I check Crucial it only offers 8GB as a compatible upgrade.  


























RAM.jpg ?109 KB

Read other answers
RELEVANCY SCORE 67.6

Just bought my Ideapad. Where is the Novo button?  Is it accessed through the small hole next to the HDMI socket using say  a paper clip. TIA 

A:Ideapad 110-15ACL - Novo button

Almer32 wrote:Just bought my Ideapad. Where is the Novo button?  Is it accessed through the small hole next to the HDMI socket using say  a paper clip. TIA The "Novo" button is accessed through a small hole in the casing on both my Ideapad 500-15ISK, and my 700-15ISK.  However, make sure that you are inserting the end of the paper clip into the correct hole! Scroll to the bottom of this page and click "Documentation" in the "Support" column.  You should be able to download the "User Guide" and/or the "Hardware Maintenance Manual" for your system.  One or other should show you where the Novo button is located. -- from CyberSimian in the UK

Read other 1 answers