Over 1 million tech questions and answers.

Driver power State failure.

Q: Driver power State failure.

I have a Toshiba Satellite C55T-A. Running windows 10 since December. Was running Windows 8.1 previously.  The last few days my computer has been slow to shut down and start up. A blue screen comes up saying it ran into a problem and needs to shut down.then shows this message. Driver Power State Failure. i don't know if I added what I should have. if not, you will have to tell me how to do in very easy computer ease talk.  Thanks for help.
 

SysnativeFileCollectionApp.zip 2.61MB
3 downloads

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Driver power State failure.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 88

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 88

Hey, I got some BSOD problems. Do you got time & experience to help me?

I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely.

My problems ATM!

- Driver Power State Failure
- Video TDR Failiure (nvlddmkm.sys)
- Screen freezes at start up or when I get to the desktop
- Have to Disable my NVIDIA GeForce GTX 675M to use the CPU (Windows has stopped this device because it has reported problems. (Code 43).

Got two other kinds of BSOD before I re-installed windows but don't remember what they said, I just felt like "Hey I need to re-install my OS anyways so w/e". But apparently that didn't solve the problems.

I also gained "NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped working While playing CS:GO" but that was before I re-installed windows. And now to use my CPU I need to go into Device Manager and shutdown my NVIDIA card to be able to use the CPU and use the Intel card instead. If I don't shut it down my CPU will freeze the screen for days, til I restart or I get a BSOD.

I will buy a can of air and open up my laptop and blow some dust away, perhaps that could help? Perhaps the NVIDIA card is burned/broken and I have to buy a new PC?

I've tried a few different driver for my NVIDIA card also, nothing works.

I'm no computer expert and thats why I'm here begging for help, so if someone could help me out here I would appreci... Read more

A:Driver Power State Failure,Video TDR Failure(nvlddmkm.sys)

Hi Markmsigt60 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Sep 26 06:15:51.972 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\092614-55906-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9200 MP (8 procs) Free x64

Built by: 9200.16912.amd64fre.win8_gdr.140502-1507

System Uptime: 0 days 0:07:07.738

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+5a540 )

BugCheck 9F, {3, fffffa800892b880, fffff8800326a7f0, fffffa80089c3e10}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800892b880, Physical Device Object of the stack
Arg3: fffff8800326a7f0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa80089c3e10, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz"

MaxSpeed: 2400

CurrentSpeed: 2395

BIOS Version E16F3IMS.50R

BI... Read more

Read other 3 answers
RELEVANCY SCORE 88

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 85.6

Hello,

I would appreciate any help with the following problem: the pc sometimes seemingly randomly shows BSOD with errors named in the title, I also attach corresponding screenshots. The problem wont happen if the PC power is supplied from the adapter AND there is some content running on the screen (video in VLC f.ex.). Other important symptoms are: Can not turn off the laptop. There will be endless blue screen saying shutting down,while PC already stopped working. I also can not get the PC to sleep. If i I go to sleep mode, display turns black, PC is still working on and on and I can not go back to desktop anymore.

Thank you very much for your help.

Ales

Read other answers
RELEVANCY SCORE 85.2

For the last week i've been getting this BSOD whenever i turn on my laptop

I've follwed the instructions and the files that i need to attach so here they are

In the meanwhile my laptop sound also decreased drastically , i found out that one side of it aint working and this also started in the same time period .. coincidence or just hardware fault ?

My laptop

HP G6-2005ax AMD A8 Windows 8 64 bit



Please help

Thanking you

A:DRIVER POWER STATE FAILURE

Hi,

The attached DMP is of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

From the perfmon:

Symptom:
A service is reported as having an unexpected error code

Cause: One or more services has failed. The service did not stop gracefully, suggesting the service may have crashed or one of its components stopped in an unsupported way.

Details: Service exited with code not equal to 0 or 1077

Resolution: Restart the service


Quote:




Display Name: VMware Workstation Server
Exit Code: 1067
Service Name: VMwareHostd
Path: "C:\Program Files (x86)\VMware\VMware Workstation\vmware-hostd.exe" -u "C:\ProgramData\VMware\hostd\config.xml"
Service Code: 0
Started: False
State: Stopped




---------------


Quote:




Symptom:
Device is disabled.

Cause: A device is disabled preventing it from working properly.

Details: The device, VMware Virtual Ethernet Adapter for VMnet1, is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is 25.

Resolution:
1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disab... Read more

Read other 9 answers
RELEVANCY SCORE 85.2

I'm using a Toshiba Satellite S55-C5363 and I have been semi-frequently getting BSOD due to "Driver Power State Failure." This usually happens when I try to run software that is somewhat graphically intensive, such as solidworks or photoshop. In either case, they run for a period of time (sometimes long, sometimes short), and then I encounter the bluescreen. I believe my computer has a good enough specs to run this software. Either way, I don't think my computer should be crashing.
I have malwarebytes installed and am currently running a scan. I just installed bluescreenview. Let me know if I should download any software and attach any logs. Attached is a log from speccy.
Thank you.
 

A:Driver Power State Failure

The one thing I notice straight away from your specs is that you're running an Nividia 950m graphics card in your laptop, with version 354.35 drivers.
 
The latest drivers for this model of card are at version 375.70 (available here), Seeing as you experience driver failures when performing graphically intense operations, you may well find that a straight update to the latest drivers from Nvidia might well solve your problems.

Read other 11 answers
RELEVANCY SCORE 85.2

We have been getting the blue screen of death very intermittently over the past several weeks and aren't aware of any new hardware or software that has been installed to cause any issue. Below is the full technical information. Does anyone know what is causing
the BSOD?
Stop: 0x0000009F (0x0000000000000003, 0xFFFFFA800423CA10, 0xFFFFF8000413D748, 0xFFFFFA80078A8CA0)
Thanks!

Read other answers
RELEVANCY SCORE 85.2

Someone help me with this computer failure. See attached computer dump.

A:Power Driver State Failure

Hi, welcome to the forums You may need to post at our BSOD forum :-

BSOD, App Crashes And Hangs - Tech Support Forum

However as your error sites Ntoskrnl.exe and this is generic (probably not the cause) it may be a simple ACL's problem (many are) so run a chkdsk, in safe mode, cmd prompt, chkdsk/f

Read other 1 answers
RELEVANCY SCORE 85.2

In the last few weeks I've been getting stuck and when rebooting I get a blue screen and minidump w/Driver Power State failure. Please help? I've done PERFORM/REPORT and attached.

A:Driver Power State Failure

Hi -

There are no attachments to your post.

Run Driver Verifier - http://www.techsupportforum.com/f217...ed-473665.html

Provide full system info - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 85.2

Hi Allfor the past days I've bumped into BSOD Driver Power State Failure quite a few times. All my drivers are up to date, but I suspect my BIOS not to be. My BIOS version is: CDCN26WW, 12-10-15. Could the problem be around the BIOS?

Read other answers
RELEVANCY SCORE 85.2

I have been getting a blue screen of death lately and I was hoping somebody could help me out with it. I included the attached minidump folder.

A:Driver State Power Failure

Hello,

Please take a look at the following thread and perform the steps.

Once you have the requested reports attach them to the next post.

This will provide more information to help diagnose your problem.

http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers
RELEVANCY SCORE 85.2

Hello,

I just got a Driver Power State Failure Bsod. Please find attached the dump files. Any help would be greatly appreciated.

Edit: Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.

Checking Gigabyte for an update to the audio drivers.

Edit: No new driver on the Gigabyte site. Will reinstall.

A:Driver Power State Failure

Hi brouhahaha,

The Asmedia 106x SATA controller driver has caused the crash.
As a bluescreen crash happened only once, I wouldn't be worried too much about it.
Windows resolves bluescreens that only onces happened.

Code:
0: kd> !irp ffffe001eed11b40
Irp is active with 6 stacks 4 is current (= 0xffffe001eed11ce8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001ee8336e0 00000000 fffff8011a7d8bd0-00000000 Success Error Cancel pending
\Driver\pci storport!RaidAdapterPowerUpDeviceCompletion
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe001eeec7050 00000000 fffff8001b92ed78-ffffe001eed12c70 Success Error Cancel pending
Unable to load image asstahci64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asstahci64.sys
*** ERROR: Module load completed but symbols could not be loaded for asstahci64.sys
\Driver\asstahci64 nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe001eed12c70
Arg... Read more

Read other 0 answers
RELEVANCY SCORE 85.2

I think the general set of symptoms apply to my situation. I haven't experienced a shut down while using my laptop, but I've come home on occasion and it was shutdown, though I'm fairly certain I left it on. Additionally, if I close the lid and allow the computer to go into 'sleep' mode, it won't start back up...instead it says that it ran into a problem and will gather some info and restart for me. It also states that I can look up "POWER_STATE_DRIVER_FAILURE" to learn more about the problem...which lead me here.

I think I've followed the instructions properly but if there is information you need from me that isn't provided, please let me know.

Windows 8 (64-bit) came installed
Purchased early December 2012

Intel i7-3517U (Ivy Bridge)
Intel HD Graphics 4000
NVIDIA GeForce 610M
Factory power supply & battery

Lenovo Ideapad U410
Model # 20170

Of note about this particular laptop, I believe they were initially being sold with Windows 7, so although this one arrived, brand new (not refurbished), with Windows 8 already installed from the factory, I don't know that it wasn't sitting on a self in the warehouse with the previous version of Windows and then was upgraded before being shipped out. I have no clue if that actually matters at all. Lastly, these laptops were infamous for wireless issues resulting in slow connections, power signals and intermittent signal lose. From what I found online, it was a hardware issue that Lenovo addressed pr... Read more

A:Power State Driver Failure

Some more specifics...

Power supply is Lenovo, model ADP-65KH B, 20V output.

I also spent a bunch of time updating all the drivers, etc. that I could find...which didn't help. I didn't find any anti-virus software to remove, which I've seen in other threads can be problems.

Also, I forgot to attach the second report in my initial post so I've attached it here.

Read other 2 answers
RELEVANCY SCORE 85.2

Hi
Bough a new laptop and about 1 week afterwards I am getting the blue screen of death.
Have a Dell xps, i7 with 6 gig ram and 1 gig video card
Tried to make sense of the minidump file but that seems messed up too.
Attached the latest dump file, hope someone can help me out.

A:Driver power state failure

Quote:





Originally Posted by phillip07


Hi
Bough a new laptop and about 1 week afterwards I am getting the blue screen of death.
Have a Dell xps, i7 with 6 gig ram and 1 gig video card
Tried to make sense of the minidump file but that seems messed up too.
Attached the latest dump file, hope someone can help me out.




Additional info:
Dell XPS L502X
Windows 7 Home Premium
Intel i7 2.2ghz
Ram 6 gb
64 bit operating system
pre-installed Windows
Software and Hardware in use for about 2 weeks
Nvida Geforce GT 525M

Read other 2 answers
RELEVANCY SCORE 85.2

Hi i juz had a problem recently with my new dell laptop xps1530. for a few times it had shut down automatically when i'm not using it. it stated tat it had driver power state failure which i cant figure out after looking at all the posts here. this is my dump files below....

pls help!!
 

A:Driver Power State Failure

I have seen a lot of similar "Power State" failures on computers using wireless when returning from sleep or idle.

Your minidumps, which are all the same as below, seems to confirm this >>

Debug session time: Wed Jun 17 14:49:34.117 2009 (GMT-7)

BugCheck 9F, {3, 8511bd50, 852aa030, 868c5c40}

Unable to load image \SystemRoot\system32\DRIVERS\CnxTrLan.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for CnxTrLan.sys
*** ERROR: Module load completed but symbols could not be loaded for CnxTrLan.sys
Probably caused by : CnxTrLan.sys (>> USB Wireless >> Conexant?)Click to expand...

http://www.google.com/search?client=opera&rls=en&q=CnxTrLan.sys&sourceid=opera&ie=utf-8&oe=utf-8

I would try updating the wireless drivers, if one is available, or get something from a different vendor.

A removal and reinstall alone may also just work.
 

Read other 3 answers
RELEVANCY SCORE 85.2

I am running Vista on a Sony Vaio. Yesterday I plugged my phone into the computer (but did not download any new software) and since then I've had 2 driver power state failures. This last one is frozen and making a loud noise. Technical information: STOP: 0x00000009F (0x00000003, 0x86CFA8D8, 0x83FAA260, 0x86F4ED10). What can I do?

A:Driver Power State Failure

Welcome to TSF.

Follow the instructions here: http://www.techsupportforum.com/1871981-post2.html

It will provide us wit more information about your computer and the problem.

Clever user name, by the way.

Read other 1 answers
RELEVANCY SCORE 85.2

So I have an Asus ROG laptop and I've recently started having some issues with it, one of them being this driver state power failure bsod. Its happened 3 times now in the past two weeks.

I haven't exactly nailed down what causes it, but I've done some research and most places suggest updating drivers and BIOS to fix it.

The first issue I'm having with this is that I'm unable to update my BIOS. I've got the file downloaded from the Asus website, I put it on a flash drive and tried to use the EZ Flash 3 utility to update the BIOS but it doesn't see the flash drive. In fact it doesn't see any drive at all except for one 256 MB partition on the main hard drive (laptop has an SSD and 2nd hard drive for storage). I've tried formatting the drive in FAT32 as old documentation suggested it might need that but still no luck. I've tried several flash drives and no luck. I read that USB 3.0 might be the problem, but the laptop only has 3.0 ports. So not sure what I can do about that if that is the actual problem.

Some other additional information, a few days ago I noticed my power brick for charging the laptop got extremely hot as it was under some blankets and such. How long that was going on I don't know. Could the charger be the problem? When it BSOD'd a couple hours ago it was shortly after I unplugged it (30 seconds-ish). But this did crash before I noticed the power brick issue so I don't know if its been a thing for that long or not.

Also I did update my video card... Read more

Read other answers
RELEVANCY SCORE 85.2

Hi, i have same problem with my laptop s55t-c5325...Here i upload the zip file from the log collector, maybe this will help me.

Thank you

A:Driver Power State Failure

Please update your installation to version 10586
Windows 10 Forums

Code:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 10 Kernel Version 10240 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 10240.16841.amd64fre.th1_st1.160408-1853
Machine Name:
Kernel base = 0xfffff802`4d614000 PsLoadedModuleList = 0xfffff802`4d939070
Debug session time: Wed Jun 1 17:15:51.596 2016 (UTC + 2:00)
System Uptime: 0 days 0:27:18.458
Loading Kernel Symbols
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 0 answers
RELEVANCY SCORE 85.2

Hi
I have just upgraded from windows XP 32 to window 7 64
My cursor is really jittery and typing is delayed
if I leave my computer in idle then i get the blue screen and one of the messages is 'driver power state failure'
I've got the dmp files zipped but not sure how to attach to this thread
I suspect that I need to remove or update a driver?
any help would be greatly appreciated
thanks
Tim

A:'driver power state failure'

Just click on the paperclip in the tool bar on the reply/edit post.

Here is a tutorial that will explain it.

How to Upload and Post a Screenshot and File in Seven Forums

Read other 4 answers
RELEVANCY SCORE 85.2

Hi all, this is my first time here, and I need some help.

I'm using an Asus G71GX gaming laptop running Win7 Pro x64, and randomly my computer will just BSOD on me, and reboot. The minidump is too fast for me to read much past the first few lines, so I don't know entirely what's to blame. When it restarts, a dialogue box comes up saying "Windows has recovered from an unexpected shutdown". When I click on the more info tab, this is the information it gives me:


Quote:




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80063A8620
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA800BA8E190
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091910-19484-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-42135-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt





Also, when I wake up my computer from sleep, sometimes it doesn't recognize my speakers, and no audio comes out either from my speakers or headphones. If I put my computer to sleep and wake it up again, they're recognized a... Read more

A:Driver Power State Failure

Hi -

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 17 answers
RELEVANCY SCORE 85.2

Sorry I have NO CLUE but I keep getting that DRIVER_POWER_STATE_FAILURE also. I have no idea what to do or how to do anything! Can someone email me on what I should do because I wont know how to get back here (sorry)
thank you
[email address removed]
 

A:Driver power state failure

Have you updated any drivers lately?
 

Read other 1 answers
RELEVANCY SCORE 85.2

Hi all,
Recently my Windows 7 Pro 32-bit computer I built with an ASUS board started blue-screening on entering sleep mode. It also usually won't shut down properly. I'm getting a Driver Power State Failure bluescreen, stop 0x0000009f. Any help in resolving this would be appreciated!

A:Driver Power State Failure

Please provide this information: http://www.techsupportforum.com/f217...ns-452654.html

Read other 3 answers
RELEVANCY SCORE 85.2

dear sir,

after i installed win7 64 bit, i kept facing the bluescreen, it shows "driver power state failure", my configuration is as below,

MB: Rampage III Extreme
DRAM: 12GB OCZ
OS: win7 64 bit

can you help me preventing bluescreen again?
attached is the .dmp

appreciated!!

A:driver power state failure

Hi -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

Read other 5 answers
RELEVANCY SCORE 85.2

I have a 5 month old Lenovo Thinkpad, Win 32, Vista Basic, SP2 with all updates done. It and a desktop operate on my wireless private home network via a Linksys WRT160N router. On Oct. 2 I added a 1TB My Book World Edition as an auto backup drive and installed Western Digital software on the laptop only. My Book is connected via USB cable to the router. So far, the laptop isn't correctly loading or recognizing or connecting with the Western Digital drives, so no backups. While I'd like to solve that problem, the BSoD is first priority and may be related to the WD install.

I'm unclear about the connection between the events because the first mini dump was Sept. 29, before the WD install. Since Oct. 22, there have been frequent unexpected shutdowns, usually while the laptop is asleep. At various times my apps software has frozen (Word, Outlook) and the shutdown cycle then takes about 10 minutes. The script when recovering from an unexpected shutdown on Oct. 28 was:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 00000004
BCP2: 00000258
BCP3: 84152D78
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini102809-02.dmp
C:\Users\Jim\AppData\Local\Temp\WER-114769-0.sysdata.xml
C:\Users\Jim\AppData\Local\Temp\WER2847.tmp.version.txt

Read our... Read more

A:Driver State Power Failure

Hello JimPA and welcome to TSF!

You may try these:

1.) Restart your computer Tap F8 and select Last Known Good Command Config and see if everything goes back to normal.
2.) If No. 1 is unsuccesful try uninstalling the WD software
3.) Do you have the 1 TB backup hooked up to your laptop? Unplug it
4.) Maybe you'll need your RAM upgraded
5.) If none of these works, since it's only 5mos old, it's under warranty, I would contact Lenovo.

Read other 7 answers
RELEVANCY SCORE 85.2

Hi there,
please could someone help me. My laptop started crashing a little while back after itunes updated so i uninstalled and re-installed it but things got worse an crashes were happening a couple times a day, so i decided to do a fresh windows install to try repair damaged program files. well i am still having issues not as dramatic and as often but i really want to be done with this issue asap. help would be greatly appreciated.

A:driver power state failure

Code:
avgtdia.sys Thu Aug 1 20:06:31 2013 (51FA6B67)
avgrkx64.sys Tue Sep 10 04:42:59 2013 (522E4EF3)
avgfwd6a.sys Thu Sep 26 13:44:43 2013 (5243E5EB)
avgmfx64.sys Tue Oct 1 04:49:53 2013 (524A0011)
AVG contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Code:
TuneUpUtilitiesDriver64.sys Fri May 25 16:28:19 2012 (4FBF5EC3)





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer


Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Reduce... Read more

Read other 9 answers
RELEVANCY SCORE 85.2

So I'm in the middle of playing Star Wars the Old Republic and BOOM. Everything goes down with a scream. What happened?  I only got the computer in late November. It's been working fine. I found this in the event log:Error    4/24/2016 7:44:40 PM    BugCheck    1001    NoneError    4/24/2016 7:44:33 PM    Eventlog    1101    Event processingCritical    4/24/2016 7:44:10 PM    Kernel-Power    41    (63)Error    4/24/2016 7:44:29 PM    EventLog    6008    None  I get the impression from googling its a bit peeved I won't let it update drivers but since I'm not letting it update anything but malware/virus definitions I don't see what would cause it.(I slammed the halt on all updates when the last intel graphics driver update proceeded to BREAK my game - repeatedly, after every auto update, thereby rendering the computer largely useless for my purposes. I'm still trying to figure out how to get anything but an intel graphics card since it is apparently more trouble than its worth.)Can anyone tell me for sure what would cause this and how can I prevent this?

Read other answers
RELEVANCY SCORE 85.2

Running an HP Quad Core with Vista Home Premium SP2. The last two months I've been getting BSOD's on hibernation. Error message indicates it a DRIVER POWER STATE FAILURE.

I've updated all drivers and uninstalled software added just before the first BSOD, with the exception of Skype. Attached a .zip with the last four MiniDump files. I've tried analyzing them with Windbg, but I can't get the symbols to load properly.

Any assistance would be greatly appreciated.

A:Driver Power State Failure x9F

Hello and welcome to TSF.

It's not just you that can't get the symbols to load, they aren't loading for me neither. Where is the OS from? There's no Built by: line, either...

Read other 14 answers
RELEVANCY SCORE 85.2

Whenever my computer goes to sleep overnight and i try to wake it up the following morning it does not wake up at all and pressing the power button doesn't wake it up either. I had to open up my computer take out my ram and put it back and pressed the power again to power the computer back up again and when i do i get a bsod error driver power state failure ntoskrnl.exe. Attached is the dmp files and everything appreciate the help

A:Driver Power State Failure

You have a NETGEAR WNDA4100 N900 Wireless Dual Band USB Adapter:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website). Be sure to update ALL controllers on the motherboard! I STRONGLY suggest not using controller drivers older than mid-2012 with SSD's.
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. ... Read more

Read other 6 answers
RELEVANCY SCORE 85.2

Windows 7 pro..I have been getting driver power state failure at shutdown. what do i need to copy and post to address this issue? tks

A:driver power state failure

http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 85.2

Recently I've been getting blue-screened every 15 minutes or so with a Driver Power State Error. I'm beginning to get desperate for a solution. Attaching the DMP file seems difficult, as it is over 300MB, somehow. Is there any way to split off the more recent part of it, or an easy upload service where I could send it?

I used a program called Bluescreenview to make a text file out of the most recent dump... I think. Here's the text file it gave me.

A:Driver Power State Failure

We really need your full crash reports to be able to assist you. Please follow the blue screen posting instructions to receive help with your crashes.http://www.techsupportforum.com/foru...ta-452654.html

-----

Read other 1 answers
RELEVANCY SCORE 85.2

Hello I m using Intel base pc but after installation of windows 8 I m facing a problem......
when I start my pc after boot it's show blue screen " power driver State failure" what is men pleases help me any one my system configuration is below and I am put the link of my sky Drive there is Minidump File and System Information

Main Board Intel Dx58so
Prosser Core i7 930
Hard Disk 160 GB WD
320 GB W
VGA ATI 4650
WIFI TPlink TL-722n

SkyDrive Link

https://skydrive.live.com/?cid=a3c35...2101E1D%211904
Download the file and tall me what I do after show Blue Screen "power driver State failure" I update my WIFI Driver but doesn't work pleases help me thanks
Goher Altaf

Read other answers
RELEVANCY SCORE 85.2

Hi, Getting this blue screen error quite alot now, multiple times a day.
I know its quite a common error, I am running Windows Vista Home Basic SP2 on a ACER Aspire 5738. Dual core processer @ 2.0 GHz .32 Bit.
Heres some details about the error.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 6153

Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: C12630A8
BCP3: BF65BB78
BCP4: BF65B874
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini041911-02.dmp
C:\Users\ganly\AppData\Local\Temp\WER-350362-0.sysdata.xml
C:\Users\ganly\AppData\Local\Temp\WER8297.tmp.version.txt

HELP WOULD BE MUCH APPRECIATED, THANK YOU.

A:DRIVER POWER STATE FAILURE

I'm not allowed to attach the dump file, and i cannot locate the other two files in the temp folder.

Read other 5 answers
RELEVANCY SCORE 85.2

my OS - XP pro SP2

Every time I try to shutdown my computer a blue screen appears:

Driver_Power_State_Failure
. . .
. . .
Stop (0x00000500 0x00000002 0x(changes every time) 0x81AF3E30).

Can someone Please advise ?

Read other answers
RELEVANCY SCORE 85.2

Hi! I am Monjur Alahi from bangladesh. I have a HP Pavilion Notebook, recently i sufferd a problem during start up . Its take too much time display a message which is " Driver Power State Failure". How can i fix the problem with my Notebook ? Help me Please

Read other answers
RELEVANCY SCORE 85.2

Hey all,

I just put Windows 8 Professional 32-Bit on my Gateway M100-E laptop. It seems to crash when it is restarted and it's power state has changed. As in from battery to power cord and vice-versa. The BSOD tells me the error is called a driver power state failure. This laptop is 100% stock with the latest Windows 8 updates. The antivirus I'm using is the included Windows Defender and Windows Firewall. Attached are my log files.

A:Driver Power State Failure

First of all

update this driver

Intel Raid StorPort Driver

Intel Download Center

Read other 4 answers
RELEVANCY SCORE 85.2

Hi
I've been getting this BS error for quite a while now and it is becoming more frequent so I've decided to take action. I have no idea what?s causing it but it happens when I try to put my laptop into hibernate - sometimes it happens when the laptop is idle. The Vista report (below) tells me that there is a solution available which is great but it doesn't tell me what that is. I have no idea what the 3 files mentioned are or how to find them. I have run CHKDSK but it didn't find any issues though maybe I missed something. I have also updated all my drivers from Device Manager but it tells me that everything is up to date.
I have the date from the first shutdown. Is there anyway from that that I can see what was installed on that date that may be causing the problem? There is nothing close to that date that I can see in Control Panel.
My laptop is an ASUS M51Sn running off Vista x32 which was preinstalled and is about 3 years old. I have attached the files as per the BSOD guide.

Thanks in advance


Product
Windows

Problem
Shut down unexpectedly

Date
28/05/2011 19:24

Status
Solution Available

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 6153

Files that help describe the problem (some files may no longer be available)
Mini052811-02.dmp
sysdata.xml
Version.txt

Extra information about the problem
BCCode: 116
BCP1: 9EDC1008
BCP2: 90E0D880
BCP3: 00000000
BCP4: 00000002... Read more

A:Driver Power State Failure

Hi,

The camera driver (snp2uvc.sys) is blamed for this issue!


Look here & try the "Two" listed drivers: -

http://drp.su/drivers/notebooks/?v=A...Sn&id=242&l=en


USB 2.0 UVC 1.3M WebCam & USB2.0 1.3M UVC WebCam


So, give them a go & see what happens from there. OK?

Read other 6 answers
RELEVANCY SCORE 85.2

i have a toshiba satellite u405d-s2874 and i was transferring files from one portable hard-drive to another and i got a blue screen with the driver power state failure on it. the laptop restarted and all and i thought that maybe it fixed itself or something like that so i contiinued doing what i was doing and now after a while the laptop goes to the blue screen with the power state failure. i searched for it on google and it lead me to a post on your site. i read it and its about the same problem cept for the power button on the harddrive thing. its happened about 3 times or so while i was trying to read the post and sign up for your site. please need some help...oh can you tell me if i made a good buy by buying a toshiba??
 

A:Driver Power State Failure

Have the same laptop and same problem. As far as I can tell it is due to a bad SD card reader driver. I downloaded the "Debugging Tools for Windows x64" from here and used it to load the memory dump file located in "C:\WINDOWS\Minidump". You can follow the description here on how to do this. The debugger identified the file "o2sdx64.sys" as the culprit so I went over to toshiba here and downloaded the latest SD reader driver. The old version of this file was identified by the device manager as 2.0.2.909 and after updating was 2.0.2.915.

I have not tested this for long but so far no BSOD. I did notice this error seemed to occur often when I was swapping files off the SD card I am hopful.

Hope this helps.

By the way I am running Vista x64
 

Read other 1 answers
RELEVANCY SCORE 85.2

Hello,
I've been getting the BSOD for Windows 8 since I've downloaded it. I purchased the digital copy online from Microsoft, but don't have a CD to do a reinstall, and really would hope to avoid wiping all my files. Sometimes I go weeks without getting the error, but I want to fix it once and for all. It always happens upon my PC "reawakening". Attached is the most recent Minidump https://skydrive.live.com/redir?resid=12EC8E4E1EFCF023!575&authkey=!ACvFmfUZxRKkwgM
 

A:Driver Power State Failure

If you have your upgrade key you can enter it HERE and download the upgrade again. If I remeber correctly they Give the option[or did before] to put the software on a USB drive.

Read other 11 answers
RELEVANCY SCORE 85.2

-Win 8.1, recently upgraded from 8
- x64
- Win 8 was the original OS on the laptop
- OEM, came pre-installed
- 1.5 years
- Upgraded to 8.1 about a month ago

- i7 4700MQ
- GT 750M

- Lenovo
- Y410p

-Laptop

I can't access my System Health Report, whenever I try to run perfmon/report in cmd (As administrator), I get an error message saying THE OPERATOR OR ADMINISTRATOR HAS REFUSED THE REQUEST. I can manually view the report in Performance Monitor but I have no idea how to save it from there, there is no option to save the report anyhow.

A:Driver Power State Failure

Hi. . .

BSODs appear to be related to USB, but the dumps are not giving up the 3rd party driver name.

See if Driver Verifier flags any 3rd party drivers - http://www.techsupportforum.com/foru...ed-473665.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 85.2

hey
Lately when ever i shutdowm my computer i eather get shutdowns taking as long as 30 mintues or a BSoD with a Driver power state Failure. Can anyone help? I have noticed that members here attached the Minidump as a .zip file, for you to figure out the problem , I dont know how to do that ..There are no other problems with system proformace. Also, when it restarts again it gives me messag that hardware ID missing, I dont know what does that mean.. shall I reformat the computer??

my PC information is
HP pavilion tx 2500
Windows Vista, SP1

looking forward to your reply and support..

A:Driver power state Failure

Please follow the directions here to upload the information that we need: http://www.techsupportforum.com/1871981-post2.html

Read other 3 answers
RELEVANCY SCORE 85.2

Hi - my Lenovo G500s, which I bought in October, says DRIVER POWER STATE FAILURE about once a week. It's on Windows 8.1. The laptop closes whatever I'm doing, gathers data, then restarts. I understand this is a serious error. What do I need to do to fix it?

A:Driver Power State Failure

Moved to Bsod,App crashes and Hangs for further help.
Please follow the instructions here http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers
RELEVANCY SCORE 85.2

My desktop just crashed and all I could get was "Driver_Power_State_Failure" off the BSOD before it went down.

Now when I hit the power button I get NO VIDEO OUTPUT at all, so I can't even turn it on. I was thinking about trying to turn it on w/o a monitor and get in over the network to get the dump files but being as I have no video I can't logon so it won't get to the homegroup for me to do that. Unfortunately this is all the information I have.

A:Driver Power State Failure

Guys I solved the problem, or at least located it and found a temporary fix.

It appears my video card bit the dust and I solved the problem by routing the monitors directly to the motherboard connectors and removing the video card.

3 years running on the card, I think I got my $100 worth.

Read other 3 answers
RELEVANCY SCORE 85.2

Wondering if anyone can help. About 1x/week I'm getting a blue screen that says I have a Driver Power State Failure. I really don't know what to do even though I have read up a little on it.

Anyone have any suggestions on how I can get started fixing this?

A:Driver Power State Failure??

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 9 answers
RELEVANCY SCORE 85.2

i have HP-Pavallion slimline s3430f desktop , i have windows 7 x64 bit and the blue screen comes anytimes it goes sleep and its moving very slow....i think i have a bad driver, but i cant figure out where.


can some one help me..thanks in advance

A:Driver power state failure

I had the same problem. Try uninstalling the "HP ProtectSmart Hard Drive Protection" drivers. I did that and my HP is running more smoothly now, but it was easy getting rid of the old drivers. I had to manually copy the new "HP 3d Driveguard" drivers to replace the old Protectsmart drivers. Good luck.

Read other 3 answers
RELEVANCY SCORE 85.2

Hello I have an issue very similar to the one in this thread:

[SOLVED] driver power state failure bsod

I have used driver verifier and caused my computer to bsod under those specific settings, here is my dump file:

Any assistance would be appreciated!

A:driver power failure state

Hi,

The attached DMP file is of the DRIVER_VERIFIER_DETECTED_VIOLATION (c4) bug check.

This is the general bug check code for fatal errors found by Driver Verifier.

BugCheck C4, {73, e, e0008000, 1000}

^^ The 1st parameter of the bug check is 0x73 which indicates that MmMapIoSpace called when not at DISPATCH_LEVEL or below.

If we take a look at the call stack:


Code:

0: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff800`00b9c008 fffff800`02f073dc : 00000000`000000c4 00000000`00000073 00000000`0000000e 00000000`e0008000 : nt!KeBugCheckEx
fffff800`00b9c010 fffff800`02f18996 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!VerifierBugCheckIfAppropriate+0x3c
fffff800`00b9c050 fffff880`0f691c2b : 00000000`e0008000 00000000`00000001 00000000`0000003e fffff880`0f68e0e6 : nt!VerifierMmMapIoSpace+0x36
fffff800`00b9c090 00000000`e0008000 : 00000000`00000001 00000000`0000003e fffff880`0f68e0e6 fffffa80`0c7d3780 : nvlddmkm+0x1e6c2b
fffff800`00b9c098 00000000`00000001 : 00000000`0000003e fffff880`0f68e0e6 fffffa80`0c7d3780 00000000`ffffffff : 0xe0008000
fffff800`00b9c0a0 00000000`0000003e : fffff880`0f68e0e6 fffffa80`0c7d3780 00000000`ffffffff 00000000`00000030 : 0x1
fffff800`00b9c0a8 fffff880`0f68e0e6 : fffffa80`0c7d3780 00000000`ffffffff 00000000`00000030 00000000`00000000 : 0x3e
fffff800`00b9c0b0 fffffa80`0c7d3780 : 00000000`ffffffff 00000000`00000030 0000... Read more

Read other 15 answers