Over 1 million tech questions and answers.

Unable to connect to this network

Q: Unable to connect to this network

Ok so Ive recently reinstalled my Dell Laptop, I have Windows 7 Ultimate 64&Bit and I could connect to other wireless networks but I can't connect to my home one!? I did try shutting the modem/router and starting it again but didnt work, I did install the right drivers? Please help me!

Thanks

RELEVANCY SCORE 200
Preferred Solution: Unable to connect to this network

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Unable to connect to this network

and welcome to the Forum

I moved your threat to the Networking Forum. Has this pc ever connected to your home network before?

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework.


To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.

Read other 19 answers
RELEVANCY SCORE 64.8
RELEVANCY SCORE 57.6

i'm using a dell inspiron 8600, sp3. i've never had problems accessing the internet until a few weeks ago when i moved. i was slated to join in on my roommmates network, but for some reason I cannot connect. Or more precisely, I connect for about 2 seconds, and I'm immediately bumped off. My roommates tried to fix it, but in vain. the signal is coming in strong on my computer, so I'm not sure what the issue is. any help is definitely welcomed.
 

A:perpetual acquiring network address/unable to connect to roommates network

Read other 6 answers
RELEVANCY SCORE 57.2

Hi,

I am hoping that someone can help me.
We have three computers at home two which are connected to router and working fine and my laptop.
My laptop was connecting to my home wireless network until my daughter used it last. Now it will not connect at all
I used to have to follow the steps below for some reason and then it would connect fine:
Wireless network connections
Change advanced settings
Wireless Networks tab
I would have to tick the checkbox USE WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS
Then into properties for my wireless network and in association retype my password and then it would connect. (it seemed like to much work every time but it still worked)
There was other networks in the list which i deleted and wireless network connection shows that the network connection strength is excellent but it just seems to get stuck aquiring the network address. I have tried repair etc.

Can someone please help me with this as maybe it's just something simple!!
 

A:Unable to connect to wireless network acquiring network addressaddress

Read other 10 answers
RELEVANCY SCORE 57.2

Hi,

I wonder if anyone can help. We recently installed a new wireless router, and all the other computers in our house can access the internet. But for some reason I can only connect to the network, even though it says there's full connectivity.

I called the customer careline for our internet providers, and they said it was a problem with my computer settings, rather than the router. But they said they couldn't advise me any further unless I paid for it, hence my need to look for advice elsewhere....

Thanks!
 

A:Can connect to network, but unable to connect to internet

Hi carrickfergus, and welcome to TSG!

Please do the following:

Press the Windows key + R to open a Run box.

Type CMD.

Press OK.

In the Command Prompt, type ipconfig /all.

Press Enter.
Copy (right-click and Select All > press Enter) the entire content of that window and paste it to your next reply.
Next,

Use a working computer to download and copy HijackThis to a USB flash drive. Plug it into your faulty computer and install the program:

Please click HERE to download HijackThis.

Run it and select Do a system scan and save a logfile from the Main Menu.

The log will be saved in Notepad. Copy and paste the log in your next post.

IMPORTANT: Do not fix anything
 

Read other 1 answers
RELEVANCY SCORE 55.6

I need real help. I had cable internet 12mbs installed last September (2010) in my one bedroom apartment. Before that, I was connecting to a spotty 1.5mbs network that was open next door (with their permission). I was able to obtain fast and efficient internet access for about 3 or 4 months and then it became intermittent. For the past 2 months I have been unable to connect through my home cable modem/router at all. I have been to the cable company and they have tested the cable modem/router and the signal which comes into the router and out at fast speeds. I have been to the place where I bought my laptop (purchased at Staples last summer). Others can connect though my wifi, but I cannot. It connects but gives me a DNS error. It doesn't matter whether I am hard wired or on wifi.

I am running:

Win 7 Home Premium (64bit) on a compaq CQ62-225NR Notebook with a Vision AMD Athlon II P320 Dual-Core processor.2.10 ghz with 3.00 GB ram (2.74 GB usable)

It contains an Atheros AR9285 802.11 b/g/n WiFi adapter
Realtek PCIe FE Family Controller
Realtek High Definition Audio
Built in pointing device (mouse pad) with a wireless mouse connected through USB 2.0 port.

hard drive: Hitachi HTS725032A9A364 SATA Disk Device

Apparently, for some unknown reason, my computer networking modules can connect to but won't or can't talk to the cable modem/router supplied by my ISP (Charter Communications) but can access the internet though any other wifi serv... Read more

A:Unable to connect to home network but can to any other network

Connect the system to your network and then
please get a command prompt (Start->RUN->CMD) and enter ipconfig /all >myTcp.txt
follow-up with the attachment myTcp.txt which will be in the directory shown in the CMD prompt window.
 

Read other 15 answers
RELEVANCY SCORE 54.4

Hi there, unfortunately I had to go onto a website last night called "Audible" because I have a payment on my credit card showing and I wanted to know what it was. My pop up browser warned me that the site may contain harmful content but I had to proceed to be able to find out what I was being charged for. I accessed the site via an email. I have tried to open up my laptop this morning and a sign popped up saying a corrupt file had changed my homepage. I cannot click on it to set is as my default. I cannot connect to the internet either, when I click on network places and highlight my usual one it comes up with a message "This is taking longer than usual". Can anyone out there help me please ?
 

A:unable to connect to network

I accessed the site via an email.Click to expand...

??? Do you mean that you received a fake email with a malicious link, clicked on the link and ignored the "harmful content" warning? If so I suggest you post the info requested by Everyone MUST read this BEFORE posting for help in this forum and then click on Report and request this thread be moved to the Virus & Other Malware Removal forum.

If that's not what you meant please explain, and show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 54.4

As a total beginner at connecting to a network via wifi i could use some info to get me connected.
I have found the correct network at my flat which is used by all other people in the property.
I have the password too.
When trying to connect i am getting the error message telling me the network is out of range.
The previous flat owner and fellow flatmates can acces the network.
The hub is in the property next door a floor lower (approx 50ft at most).

Please help!!!!
 

A:Unable to connect to network

Read other 13 answers
RELEVANCY SCORE 54.4

I have set up a small network in my office - the computers included all use the same Workgroup Name = WORKGROUP. We use a combination of Vista and Windows 7 operating systems. I just set up the newest Windows 7 Professional pc and I am getting the following error when trying to access:

\\FISCHER-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

Logon Failure: the user has not been granted the requested logon type at this computer.

I am setup on all PC's as an Administrator. I have confirmed that the Workgroup Name matches. I can see the PC when I "view devices on the network". I can't seem to even gain access to the computer to see if I can access the folders I've shared.

I followed the same procedures with a PC running Windows 7 and have had no issue getting access to the computer.

Help!
 

A:Unable to Connect on Network

Read other 9 answers
RELEVANCY SCORE 54.4

I have been automatically been getting logged into my wifi network from day one. My laptop came with windows 10 pre loaded.Now all of a sudden i get "unable to connect to this network" when i try put my wifi password in.The network is running all fine. Its this laptop that doesnt work.I have turned all updates off so i dont even get them so that cant be the problem.What can i do please to get my wifi up again. Nothing works from what ive read in the forums.Rossross1

Read other answers
RELEVANCY SCORE 54.4

hello,

I've got a laptop that cannot connect to network anymore, both wireless and fixed. when it tries to connect to the network, it sets an ip address in the range of 169.254.0.0 -169.254.255.255
further more, i saw that the HP Wireless Assistant starts all by itself after a few minutes that I start the laptop, although the wireless adapter is disabled.
now, i keep the computer completely disconnected from the network trying to figure out what is it to be done.
.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 9.0.8112.16421
Run by user at 8:49:37 on 2011-11-10
Microsoft Windows 7 Professional 6.1.7600.0.1250.40.1033.18.2991.2042 [GMT 2:00]
.
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\system32\atiesrxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Program Files\IDT\WDM\STacSV.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\atieclxx.exe
C:\Windows\system32\Hpservice.exe
C:\Windo... Read more

A:Unable to connect to network

HelloI Would like you to do the following.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.Run Combofix:You may be asked to install or update the Recovery Console (Win XP Only) if this happens please allow it to do so (you will need to be connected to the internet for this)Before you run Combofix I will need you to turn off any security software you have running, If you do not know how to do this you can find out >here< or >here<Combofix may need to reboot your computer more than once to do its job this is normal.You can download Combofix from one of these links. I want you to save it to the desktop and run it from there.Link 1Link 2Link 31. Close any open browsers or any other programs that are open.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.Double click on combofix.exe & follow the prompts.When finished, it will produce a report for you. Note 1: Do not mouseclick combofix's window while it's running. That may cause it to stallNote 2: If you recieve an error "Illegal operation attempted on a registery key that has been marked for deletion." Please restart the computer"information and logs"In your next post I need the following
Log from Combofixlet me know of any problems you may have had
How is the computer doing now?Gringo

Read other 3 answers
RELEVANCY SCORE 54.4

My son's computer will not connect to the home network. He has Windows 7 and has a wireless adapter in his computer. He was able to get on just fine. He downloaded Windows Movie Maker and Microsoft Security Essentials and suddenly his computer could see the network but could not connect to it. We did a system restore to before the things he had downloaded but still unable to connect. When I do ipconfig this is what I get:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Jake>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Jake-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 9:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #
8
Physical Address. . . . . . . . . : 00-E0-4C-C3-74-7A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : 00-E0-4C-C3-74-7B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapt... Read more

A:Unable to connect to network

Read other 10 answers
RELEVANCY SCORE 54.4

Recently I switched ISPs to Qwest, after switching I noticed a severe lag in my wireless internet feed to my PC. I was able to connect to my network and access my internets as I pleased. Recently after that my mum had her laptop's wireless card fritz out. She called a gent from Geek Squad to come out and he re-worked the wireless set-up and updated the firmware for our router and everything. He was unable to get to my computer in time to set me into the network and as usual with them, their directions on how I am to set it up were forgotten and then never written down.

So, that night when I went to access my network it did not show up in the list of available networks. My wireless card is 2 weeks old and works fine, it's just a matter of integrating myself into the network. Any help would be very much appreciated.

A:Unable to connect to network on my PC.

Well first off, don't go to Geek Squad, they seriously don't know anything.

OKay and 2nd, I need more info, what is the wireless router model, what kind of secruity, what is your new ISP and if it comes down to anything, you may have to install a new update onto your ISP or for your router. My mother had the same problem when she got her new Vista laptop.

Read other 4 answers
RELEVANCY SCORE 54.4

I've been trying to help a friend fix her computer. I seem to be stuck and can't figure it out.

I scanned it with AVG and the only infection that shows up is Trojan horse BackDoor.Generic14.BZSZ. I also scanned with Malwarebytes Anti-Malware and quite a bit more infected files showed up. It crashes whenever I try to repair anything. The computer is running Windows 7 32bit. The only obvious symptoms I can see is it's not able to connect to any network.

Any help would be appreciated!

DDS and GMER logs have been attached.
.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.7601.17514
Run by Maria Valdes at 14:16:42 on 2012-02-17
Microsoft Windows 7 Ultimate 6.1.7601.1.1252.1.1033.18.2038.1050 [GMT -5:00]
.
AV: AVG Anti-Virus Free Edition 2012 *Enabled/Updated* {5A2746B1-DEE9-F85A-FBCD-ADB11639C5F0}
SP: AVG Anti-Virus Free Edition 2012 *Enabled/Updated* {E146A755-F8D3-F7D4-C17D-96C36DBE8F4D}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\PROGRA~1\AVG\AVG2012\avgrsx.exe
C:\Program Files\AVG\AVG2012\avgcsrvx.exe
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32�... Read more

A:Unable to connect to network

Hello luie620,

Welcome to the forum and apologies for the delay. If the issue is not resolved yet please update me on the current of the condition.

Read other 21 answers
RELEVANCY SCORE 54.4

Windows XP Pro
3.0 Mhz P4
1 GB PC3200 RAM
On-Board NIC

Let me run down the spiel of this network saga:

Power surge happened Sunday afternoon. Sunday morning, I was connected fine. The orange light on the NIC shows it's on, but no connectivity. I have Comcast. Comcast modem is showing 4 lights - Power, Receive, Send, and Online. There is also a PC/Activity Light. That is suppose to show orange and nothing is blinking there. I also have a wireless network setup. The wireless router is responding and it seems to be getting activity from the LAN. I have a laptop that is setup wireless, but it won't connect to the internet since my modem doesn't have LAN activity.

I was on the phone w/ Comcast trying to figure this out. Replaced out network cables, reset modem numerous times, reset PC numerous times, hard-wired modem to the PC, hard-wired modem to my laptop with LAN enabled, still nothing. Comcast said to replace out modem. Replaced it out and still no connectivity. Brought my PC up to work to determine if it's a bad NIC or not. I had a live connection and I notice the orange light on my NIC is still on with or without any ethernet cable. Powered the PC on and still no connectivity. Uninstalled NIC and the PC detected the NIC. Still no connection. Checked in BIOS to see if on-board LAN is on and it is on. Reset BIOS and still no connectivity. Any other suggestions or bad NIC?

Thanks in advance for the help.
 

Read other answers
RELEVANCY SCORE 54.4

Hi,

I tried to connect my laptop with "Airtel 4G Hotspot" Device. Sometimes it connect with wifi but some times it says "Unable to connect this network". Using some youtube videos, I have done "Forget" method and something "Enable" process in wifi driver software.

Still am so much frustrated with it. Please help me for the same. Am also something technical and developer. Please guide me, what is the reason for it and what is solution for it.

Regards

Aditya Sharma
 

Read other answers
RELEVANCY SCORE 54.4

HELP.

I've just installed a new modem as a result of upgrading by broadband and my windows 8 PC won't connect. I've googled and followed almost every tip

ipconfig /release
ipconfig / renew

ipconfig /release6
ipconfig / renew6

ipconfig /flushdns

plus whatever else is out there. Every other device worked a treat except my desktop on windows 8.

When I try and do a ipconfig /renew it goes away and eventually comes back saying it could not find the DHCP server, what am I missing???

help please
 

A:Unable to connect to network

Read other 15 answers
RELEVANCY SCORE 54.4

Hi,

Since recently I am no longer able to connect to my router from one of my laptops. The connection is failing wireless as well as by cable. My other two laptops are having no problem at all so I think it is a problem with the laptop.

I check other posts and found I could do a TCP/IP reset so I have done that.
If have executed these commands on a elevated command line:
- netsh winsock reset catalog
- netsh int ipv4 reset reset.log
- netsh int ipv6 reset reset.log

I have restared the laptop afterwards but the problem remains: I am unable to connect to the router.

This is the output of the "ipconfig /all" command (command is ran while I've had only the adapter with the cable enabled, wireless adapter was disabled):

Windows IP Configuration
Host Name . . . . . . . . . . . . : Robin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-16-D3-84-4E-AF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IPv4 Address. . : 169.254.214.91(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{B1CCC... Read more

A:Unable to connect to network

Read other 11 answers
RELEVANCY SCORE 54.4

I have been trying to connect to my university's network, but I am unable. I USED to be able, but now something changed and I can't. I am pretty sure that my Ethernet card is working properly, since when I plug in the cord I get a blinking green light, and it says that the driver is installed and working properly. Plus, when I run IPCONFIG, it gives me an IP Address and Subnet Mask. However, it does NOT give me either a Connection-Specific DNS Suffix nor a Default Gateway. I checked, and I am pretty sure that I have no firewalls (including the built-on XP one) running. Any idea why I can get an IP address and not connect to the network? My computer is registered with the university, and I used to be able to get online.
Thank you!!!!
 

A:Unable to connect to network

Can you connect to any other site on the Internet? If you can the problem is probably not with your side of the connection.
 

Read other 2 answers
RELEVANCY SCORE 54

I am using Acer aspire 5749Z laptop with windows 7, 32 for four years.  I have installed Qualcomm Atheros AR5B125 Wireless network adapter (downloaded from Acer official website for windows 7 32 bit operating system). I am trying to connect to wireless network but after connecting, a window appear with a message "Windows was unable to connect to the network."  I run windows troubleshooting and the resulting window showed a message "Problem with network adapter or access point". I am using the same wireless network for my samsung and micromax android phones and they are working well with the same wirless network.  Sometime  wireless network connects but after few minutes it disconnects. Also the wireless network disconnects if my router is in one room and I use the laptop from another room. After searching solutions for this problem on Acer support website and Microsoft support I uninstalled the wireless network adapter and reinstalled the driver but the problem is still persist. I format my laptop and again installed window 7 and wireless network adapter for many times but the  problem remain same. I tried the solution given below but it didn't worked too.
 
SOLUTION 1
Open computer management
Clicked on device manager
double clicked Atheros AR5BB125 Wireless Network Adapter
selected driver tab
selected Update Driver...
selected Browse My Computer...
selected Let me pick from a list of device drivers...
selected Have Disk...
navigated to the dire... Read more

Read other answers
RELEVANCY SCORE 54

Hello! First post here, probably won't be my last

Here's the situation... I'm trying to connect to my wireless network, but when I do, it simply says "Windows could not connect to (my network name)"
Then I go to troubleshooting, and I get to a loading screen that says "Detecting problems, looking for problems in adapter, resolving problems, ver... etc" and then another window pops up when that's done, that basically tells me to reset the adapter, wait 10 seconds, yada yada you know how that goes.

I reset my modem, and then press "Check to see if the problem is fixed."

Same loading screen comes up as the one I posted above.Then it comes to a screen that says "Windows could not resolve your wireless connectivity issue."
There is a backstory to this. Last weekend, my mom's computer crashed (not exactly sure what happened, she is much less computer literate than I am and just credited the crash to a virus, but I'm pretty sure that wasn't it... long story short she just had a friend re-install windows 7 and whatnot.)
She needed me to her re-connected to our wireless network.. At the time, I was able to (and was) connected to our network. I ran into the same problem with hers, but ended up doing something to get it to work. I didn't meddle with any of the network options, I don't think (I can't remember... I didn't change any passwords, I left it on WPA-2 Personal, all that).
So I ... Read more

A:Windows was unable to connect to (network name)

Read other 9 answers
RELEVANCY SCORE 54

I am unable to connect my Gateway laptop to the internet. The message says they cannot find a network. We have a wireless router and my husband's I-Pad connects just fine. Another message says to turn on the wirelss capability, but the switch on the left, front corner is turned to wireless ON. It did work fine, but suddenly can't connect. I appreciate any suggestions.

Thanks
 

A:Unable to connect laptop to network

hiya,go to control panel>device manager and scroll down the list to network adapters, expand the + sign at this line what is listed and is there any yellow! or?-redXs
 

Read other 1 answers
RELEVANCY SCORE 54

Win7 install went perfect. Loving it so far.

Came home and hooked up to wireless network. I can see my server and the 5 shared folders available. But I am unable to connect to any of them. Each time it says
"Windows cannot access \\server\storage"
"You do not have permission to access \\server.....

Any ideas?

FYI Yes I have network discovery on etc etc. These ARE password protected folders, but it's not even prompting me for a user/pass. When I attempt to Create a network drive and use different credential which is an account on that machine it says "it's currently mapped using a different username and password"

Thank you
--Anec

A:Unable to connect to network shares

Check permissions on the remote machine for the folders that can not be accessed. Give permissions to "everyone." Click permissions as in my screenshot.

Map the drives using an admin account's user/pass from remote machine, by choosing to connect with different credentials as you've said.

Reboot the remote machine if you're still having problems. It will rid of that currently mapped error. If it doesn't, go on remote machine and allow more users to connect to the remote folders. For each one. Same place where you grant "everyone" permission.

Read other 2 answers
RELEVANCY SCORE 54

So I'm back to my house I rent during school. My roommate some how restarted our wireless and now it is unsecured. I'm only back for 2 or 3 days so I figure I don't care and just use it unsecured. Well my Vista isn't allowing me to conect to it becuase it's unsecured. Some security setting or something. I can't find the place to turn it off though.

Any help?
 

Read other answers
RELEVANCY SCORE 54

Hi all

I am using windows 7 and browsed internet regarding this problem for almost a week now. Any help is highly appreciated. Other windows 7 laptops and mobiles are connected to the network and running well.
No problems detected with Network adapters in Device Manager.

Here's the result of ipconfig /all :

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\xxxx>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : xxxx-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 7C-E9-D3-AE-93-F3
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Ralink RT5390 802.11b/g/n WiFi Adapter
Physical Address. . . . . . . . . : 7C-E9-D3-AE-93-F2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Bluetooth Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-spec... Read more

A:windows was unable to connect to (network name)

Read other 16 answers
RELEVANCY SCORE 54

Sir, I am facing problem with connectivity on WiFi... On available networks it always show can't connect to a network...

Read other answers
RELEVANCY SCORE 54

Can anyone help with the following problem please?

I am unable to connect to a wireless network.

I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows as "working correctly" in Device Manager. I have tried to re-install drivers for it endlessly. They all seem to install ok but I still have the problem.

The symtoms are....

1) If I try to setup a wireless connection I get "An unexpected error occured". There are no useful looking messages in Event Viewer.

2) If I use "Diagnose and repair" I get "The network adapter is experiencing driver or hardware related issues".

I have uninstalled just about anything that I think might be causing conflicts. I have scanned for malware. I have run chkdsk and sfc. I have all the latest updates from Windows Update. I have tried in Safe Mode with Networking but still get the same results.

OS is Vista Home Basic 32-bit SP2.

I'd be grateful for any advice that might help to resolve this please.

A:Unable to connect to wireless network

Hi,


Try the drivers from the Acer website: -


http://support.acer-euro.com/drivers/notebook/as_5315.html

Read other 14 answers
RELEVANCY SCORE 54

Specs:
2Gig RAM
300Gig HDD
512Mb Geforce 7500 LE
Intel Core Duo 2.13Ghz
Marvell Yukon 88E8056 Gigabit Ethernet Controller

Okay, so here's the status. I can't connect to my network at all. There are no connections listed in the Network Connections menu in the Control Panel. The ipconfig /all results in the message 'Internal error. The request is not supported'. In the Device Manager, all the network adapter components are listed (mainly the Marvell Yukon controller), however they all have exclamation marks next to them. When checking their status they give the message 'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.

I've tried reinstalling the controller drivers, as well as uninstalling the controller completely and reinstalling it.
I've also tried a few solutions (mainly from this site, actually), including the regsvr32 netshell.dll/netcfgx.dll/netman.dll commands in the cmd menu, as well as resetting tcp/ip using the netshell command.

I'm at an utter loss.
Tomorrow, I intend to open up the computer and take a look at the controller.
In the meantime, anyone have any other ideas.
Any help will be hugely appreciated.
Thanks in advance.

A:[SOLVED] Unable to connect to network.

Update:
Okay, opened her up, found that the NIC is integrated so I can't replace it or remove it. Searched the Acer site (PC's an E560) for any other controller drivers, but ended up with the same ones that won't work.

I am now completely stumped.

Read other 7 answers
RELEVANCY SCORE 54

I was recently infected with the Live Security Platinum malware and took steps to remove it. After removal, Microsoft Security Essentials could not be started, saying The specified service does not exist as an installed service. On another site, I was told to run Combofix to try and correct the problem. Once I ran it, the problem waqs not fixed AND I am now unable to connection to my internet connection. I know there is no problems with the modem, as plugging directly into my laptop shows there is no problem with the connection. So now I am stuck and have received no assistance at the other site and thought I would see if I could get assistance here. I am currently running Windows Vista 64 bit. The internet connection shows as an unidentified network with access to Local Only. Here is the Log from Combofix. Thanks for any assistance.

ComboFix 12-09-14.03 - Owner 09/15/2012 9:19.1.6 - x64
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.8173.6762 [GMT -4:00]
Running from: c:\users\Owner\Desktop\ComboFix.exe
AV: Microsoft Security Essentials *Disabled/Updated* {9765EA51-0D3C-7DFB-6091-10E4E1F341F6}
SP: Microsoft Security Essentials *Disabled/Updated* {2C040BB5-2B06-7275-5A21-2B969A740B4B}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
* Created a new restore point
.
.
((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))
.
.
c:\users\Owner&... Read more

A:Ran Combofix, now unable to connect to network

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Using a good computer download these tools to a CD or Flash drive and copy the downloaded files to the Desktop of the problem computer.Please download and run this DDS Scanning Tool. Nothing will be deleted. It will just give me some additional information about your system.Download DDS by sUBs from one of the following links if you no longer have it available. Save it to your desktop.DDS.scr <- not recommended if you use Chrome to download this .scr file. Use the other options.DDS.pifDDS.COMDouble click on the DDS icon, allow it to run. A small box will open, with an explanation about the tool. No input is needed, the scan is running. Notepad will open with the results. Follow the instructions that pop up for posting the results.Please note: You may have to disable any script protection running if the scan fails to run.Please just paste the contents of the DDS.txt log in your next post. DO NOT attach the log.===Please download MiniToolBox to Desktop and run it.Check mark the following boxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logClick Go and copy/paste the log (Result.txt) into your next post.Note: When using &... Read more

Read other 11 answers
RELEVANCY SCORE 54

Hi, i recently bought a usb wireless wifi connector & successfully installed the drivers. The problem is that whenever I click on a network to connect an error pops up saying 'Windows is unable to connect to the selected network. The network may no longer be in range.Please refresh the list of available networks, and try again.'
Plz help me to solve this problem.
Currently i am running Windows xp sp 2 on my desktop.
 

A:Unable to connect to wireless network

Why not SP3? Some networking devices will not work properly w/o SP3.

What firewall or security suite is, or ever was, on the system?
 

Read other 2 answers
RELEVANCY SCORE 54

My son's laptop suddenly stopped being able to connect to the internet via wireless. I can see it okay but just unable to connect. I've checked the drivers and they are up to date. It shows on my network when wired and I've checked with the virus software and I can see no reason for it to be blocked.

Can you help?

Tracey
 

A:Can see Wireless Network but unable to connect?

Read other 13 answers
RELEVANCY SCORE 54

Both my computers, Desktop (ethernet connection) and my laptop (wireless) were in the same network up until I changed my internet modem Hitron model CODA 4582U (Rogers cable, ON, CA). After doing the wired connection of the new medem to my desktop, since it does not have a wireless card or adapter, I am having difficulty in creating a homegroup because they are in two different network. In my desktop under system settings, network shows as WORKGROUP and but in my laptop under system settings network shows as ZNETWORK, it appears system has automatically defaulted it as domain network not as peer to peer. As such both the computers are not in the same network, WORKGROUP. I think because of that I am having difficulty in making my laptop to join the homegroup. In the laptop file explorer my desktop does not appear either under Network folder or Homegroup folder.

Further, through Control Panel > System I tried to change the name ZNETWORK to WORKGROUP. But is does not allow me to do that either, I can change only the name of the computer not the workgroup.

Any assistance in bringing thesee two computers under one network and to create a homegroup would be appreciated.
 

A:Unable to connect my two computers to the same network

Are you saying that you think the PCs are on different networks (in spite of being connected to the same router) or in different Workgroups? Having the PCs in the same Workgroup is not necessary for Homegroups, and not necessary for file sharing (but sometimes makes it easier).

If one of the PCs is in a Domain you must have joined the domain, as Windows does not default to Domain instead of Workgroup.

Please show a screenshot of the relevant portion of the System window, since you say that the discrepancy is shown there. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows Vista or latter I prefer to use the built-in Snipping Tool.
 

Read other 1 answers
RELEVANCY SCORE 54

Hi all,

I'm new to this forum so please forgive me if this question has been asked and answered before-i'm not "techy" so I don't really know all the correct terms to do a search by.

I have a "new to me" laptop. Its a Dell Inspirion 9300. I am unable to log on to the wireless network. I see that there's an excellent connection and my computer is telling me that I am connected but when I try to access the internet, via Chrome, I get nada. I get a message telling me that the DNS look up failed, I'm using Windows XP, have Norton Internet Security and am using the Wise 365 Registry Cleaner (it was acting funky before I downloaded the registry cleaner). Is there anything else I need to include? I know the computer's old, but I never had a problem accessing the internet before.

Thanks in advance!
Stacey
 

A:Unable to connect to wireless network

Read other 11 answers
RELEVANCY SCORE 54

Hello,

Recently I came across a connection problem with my PC. I have one HP compaq with all the specifications as stated below:

System Information
------------------
Time of this report: 2/26/2014, 14:55:46
Machine name: PRINCESIONG-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: Presario V3700 Notebook PC
BIOS: Ver 1.00PARTTBL8
Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz (2 CPUs), ~1.8GHz
Memory: 3072MB RAM
Available OS Memory: 3062MB RAM
Page File: 1920MB used, 4202MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

Right now, I am living in a school hostel and they provide us with a wireless connection. No problem with the password because we got it from the school. But when I was trying to connect to the wireless network, it stated that 'window can't connect to the network'. I tried to solve the problem by running some diagnostics but it was useless. After typing ipconf/ all in the command prompt window, i got the following things:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\PrInCe SiOnG>IPCONFIG /ALL

Windows IP Configuration... Read more

A:Unable to connect to a wireless network

Read other 16 answers
RELEVANCY SCORE 54

Recently purchased asus 1005 ha netbook.The problem is that windows says it is not able to connect to network.I think that I put in the wrong security key for my router.My question is how do I go back and change the key.
Thaks

A:Unable to connect netbook to network

Reset your router by pressing the reset switch (usually there is a small hole on the back of your router) this will reset it to its default settings... hope this helps..

Read other 3 answers
RELEVANCY SCORE 54

Hi everybody,
My windows 7 connection has always been able to conenct to the internet through any type of connection wifi or with wire.
But this time - i am in another country, Colombia - and the computer can only get connected to the network but i don't have the rest of the connection: no internet at all.
Even if I directly connect the ethernet cable to my computer it doesn't work...
Any idea to resolve that ?

Cheers everybody !

A:Unable to connect to the internet, only to the network

Hi tessiermaurice welcome to the forums.

Couple of questions to help us troubleshoot:
1. Are there any other machines on the network? If so do they have an Internet connection?
2. Is it on ALL networks, or one network in particular?
3. If on one network in particular, how is the network set up? is it a router or a modem?
4. Please open command prompt and type "ipconfig /all" and post the results back.

Also, please fill out your System Specs it will help us enormously, both now and for future problems.
Thanks

Read other 1 answers
RELEVANCY SCORE 54

Hi I have broadband connection and was connecting to the internet using the wireless network. All of a sudden I am unable to connect to it. On the control panel "Manage wireless network" I can view my network but not in the network sharing centre.
 

A:Unable to connect to wireless network

Do you have other devices that can connect to your wireless ??

try this
------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx ( the site now appears to require a business email, so try the direct link below)
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres alternative links

http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html

http://www.softpedia.com/progDownload/Xirrus-Wi-Fi-Monitor-Download-99109.html

Read more

Read other 1 answers
RELEVANCY SCORE 54

My laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1. Anyone who can help me on this? I'm currently using my roommate's laptop for Internet. Thanks
 

A:Unable to connect to a wifi network

Read other 6 answers
RELEVANCY SCORE 54

I have a Dell Demension L733r with a Linksys Compact Wireless-G USB Adaptor. When I start the computer, it connects to the wireless network immediately. As I go through the day, all of a sudden I start getting "Unable to Connect to Wireless Network". I click on the popup and then click on repair. It goes through it's procedures and eventually reconnects the network. Sometimes it says "Connection Very Good" other times "Low" or even "Very Low". Several minutes later, it will do the same thing again and I go through the same procedure again. This might happen several more times then it will be okay. There are days where it never happens at all and then there are days where it happens every 10 minutes or so. It also seems to happen more at night for some reason. How can I eliminate this problem?
 

A:Unable to Connect to Wireless Network

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool. Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.
Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 54

Hi All,

My friend has Windows Vista and a couple of days ago he was unable to connect to a wireless network.

He has a HP laptop. The "Blue wireless light" comes on (at the front of the PC). Windows can't start the wireless service and the HP connects to the broadcom wifi thing but doesn't find any networks.

Any ideas?

Thanks

A:Unable to connect to a wireless network

I am also trying to create a "Recovery CD" from the HP built in CD creator. However, the Matshita DVD-RAM UJ-851S ATA Device (in Device Manager) has an exclamation mark right next to it.. meaning it will not work!

I have tried "uninstalling" and "reinstalling" but with no luck. I think that if I could create these CDs, I could recover the system and get the internet working again.

Read other 1 answers
RELEVANCY SCORE 54

Just started having problems connection to any network or internet. Have new lappy that was working great until today. I am going out of town for a while and I was setting up my Slingbox. Somewhere along the line, I lost ANY connections, even to the router.

Have tried 3 different restore points. Can connect with wire to the router & get internet.

HP, 64 bit.

Any ideas?

A:Unable to connect to ANY wireless network

have you installed any software with fake networking such as virtual box recently? also, have you fiddled with the wireless network adapter settings? I did so and it messed up all connections :/
also, may sound like a dumb quetion, but have you accidentally flicked a wireless switch or pressed a button on the laptop that turns it off?

Read other 9 answers
RELEVANCY SCORE 54

I recently bought a new HP V6000 laptop. I am having problems connecting wirelessly to my local security-enabled network in my new rented accomodation - I display the network when listing the available wireless networks. It cannot be the laptop as i have connected to many other similar networks with ease!

I did manage to connect once the other day by connecting it using the cable instead of attempting to connect wirelessly and then when switching back to wireless connection it was still working. However i had the same problem again, tried the same solution but it does not work anymore???

I just cant seem to pick up the signal. The 2 other people in the house do not have this problem and have full signal from the network.

Any ideas how i can sort this problem - i no expert with computers!

JT
 

A:Unable to connect to local network

Have you power cycled the router??
 

Read other 3 answers
RELEVANCY SCORE 54

For some reason, my XP computer is unable to connect to a network printer that i used a few days ago. Yes, the spooler is running and so is RPC. I've looked at all the Tech issues and i've done everything. This printer works for other network users and i can print to different printers, so this one baffles me! Anyone have any suggestions?? I am worried this might be virus related.

Thks.

A:Unable to connect to network printer

have you tried re-installing the printer at all - I have had to often do this with HP printers for various people on network printers

Read other 3 answers
RELEVANCY SCORE 54

does limewire havea reputation for messing with lan or
registry settings.?? if so how can this problem be resolved without redoing p.c.

im on lan and cant connect to the web but i can ping.

thanx for any help
 

A:unable to connect to network..limewire?

Read other 6 answers
RELEVANCY SCORE 54

Hey everyone,

I've suddenly been unable to connect to my wireless network and this is the sequence of events leading to the problem. (Currently using a friend's computer). My chrome browser got hijacked by the search conduit virus. So, I cleaned it with AdW cleaner. My internet connection was ok then. After that, I ran ccleaner and cleared the registry.
Now, I find that I have trouble even connecting to my wireless - it says limited connectivity or no connectivity. The other comp's in my house can connect to the internet fine. I've checked and resetted my network adapter. It is working, but still can't connect. I restored all my registry but still it doesn't solve the problem.What have I done wrong?

I hope someone can give me a hand with this problem. It would be very much appreciated.

Regards,
Leon
 

A:Unable to connect to Wireless Network

Read other 12 answers
RELEVANCY SCORE 54

After recently resetting my laptop when I click to connect to either of the two ports available and entering my password, it says 'wait whilst connecting' then after a minute it goes back to show the two ports available?
 

A:unable to connect to wireless network

what do you mean by

two ports ?

whats the make and model of the PC
what windows version

can you post an xirrus and ipconfig /all

------------------------------------------------------------------------
ipconfig /all

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the infomation above those entries

We would like to see the results from an ipconfig /all - post back the results in a reply here.

For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​
For windows version, XP, Vista, W7
Hold the Windows key and press R

Now type CMD

Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​
In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a sp... Read more

Read other 1 answers