Over 1 million tech questions and answers.

windows 8 cannot install required files error 0x8007025d

Q: windows 8 cannot install required files error 0x8007025d

I bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:

Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d
The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).

Here's how I prepared to install:

1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD)
2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)

I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.

Any help would be much appreciated as I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.

TIA

RELEVANCY SCORE 200
Preferred Solution: windows 8 cannot install required files error 0x8007025d

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: windows 8 cannot install required files error 0x8007025d

I also tried plugging the SSD into another SATA port. When I tried installing Windows 7 on the same SSD, I got a similar error as well during the install, which spits out the error around the 10% progress mark

Read other 12 answers
RELEVANCY SCORE 112.8

Hey guys!

I have a new ASUS ROG G751JT-DH72 laptop, and I have been trying to install Windows 10 and Ubuntu on it. It came with Windows 8.1, so I upgraded to 10, then did a clean install of 10. Version was Home 64 bit.

That went reasonably well: only thing after the clean re-install was that on boot, the screen did nothing but flash on and off. I found out that I could get it unstuck by mashing F12, and that disabling fast boot fixes the problem permanently. My cleanly installed fresh Windows 10 worked perfectly.

I then installed Ubuntu 15.04 in the small space that I had left for it on the SSD, and gave it the whole 1 TB drive for my "home" folder.

Afterwards, Windows was gone. Mind you, the bootloader still showed up in the Grub menu, but when I tried to launch it, it told me something was wrong and I had to recover it. I tried, but couldn't: bootrec /scanos told me it found no Windows installations.

So I figured: second attempt! I rebooted using the Windows 10 DVD, and during parititioning nuked everything and created new partitions from scratch.

About 90% through the "Getting files ready" part, it failed. Error:

"Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D"

I see some people here had the same thing, but not on laptops as far as I can tell. Anybody out there who has any idea how to fix this? I tried:

- Two Windows 10 discs
- ... Read more

A:Clean Install on ROG: Error 0x8007025D (cannot install required files)

I have the same problem.. I have tried different ways to clean install windows 10 but I still get the 0x8007025D error code :/

Read other 4 answers
RELEVANCY SCORE 84.4

Hi,
I've noticed that during installation Windows 7 64 bit, I always seem to get an error, whether it's something to do with the usb I'm using, or drivers. Most recently, I've been getting an error message (0x8007025d) telling me that Windows is missing required files, and to check my installation media for errors.
I've tried several different images for Windows so far, as well as both Rufus and the Windows 7 media creation tool. Nothing seems to work, except 32 bit Windows, which for some reason, installed fine.
I'd stick with the 32 bit version and call it a day if it wasn't for me hearing about issues with 32 bit and more than 4gb of ram, as well as the fact that I have a 64 bit processor.
This isn't the first time I've installed Windows on the computer, so I know it's not a matter of components being faulty, but I'm switching my system drive to a partition on one of my HDDs (if that makes a difference).
Furthermore, I'm really reinstalling in the first place because I set up two of my HDDs in a RAID0 config, and Windows wouldn't boot anymore. I've tried switching the sata mode back to ACHI and IDE, but the error persists.
If anyone had any insights into my problem, I'd appreciate it. Thanks!

Read other answers
RELEVANCY SCORE 83.2

I'm losing it.

I've been trying to install windows 10 for the past 12 hours and it simply refuses to work. I'm using a USB to install Windows 10 onto my newly built computer, as I don't have a disc drive. The setup program gets to the stage where it's supposed to be copying the files or whatever, and after getting to like 5% it gives me error 0x8007025D. It's done this every time.

There is no related help whatsoever anywhere on the internet, none that I can find at any rate. The closest related discussions suggested re-downloading it because maybe somehow I got corrupted files put onto the USB, or somehow I didn't get them all.

I should mention, I used Microsoft's Media Creation Tool to put the files on the USB (again, 3 different times) so I don't understand how there could possibly be missing or corrupted files unless Microsoft released a faulty program to do the install with.

I'm beyond sick and tired of this. My computer is using modern parts and stuff, it's beyond compatible with the OS, so it's not a hardware issue. all of my components and such are attached correctly and detected by my computer, so it can't be there.

I have a headache and I have no patience left, so please forgive me if I come across as demanding or rude. If you need any more information, please ask, and I will provide it.

Please help.

A:Error 0x8007025D on clean install of Windows 10

Does the computer have USB 2.0 and USB 3.0 slots? Try using the USB 2.0 (black insert) slot. Also is the USB flash drive you are using USB 3.0 or 2.0? If it is a 3.0 flash drive, try using a USB 2.0 flash drive- even if you only have USB 3.0 slots to insert it in. Also at least one user reported that removing one or more sticks of RAM during the install did it. How much RAM do you have installed? Try going down to the minimum RAM for the install.

Unrelated note - if this is a Windows 10 virgin computer, how do you plan on activating Windows 10 after install?

Read other 4 answers
RELEVANCY SCORE 80

This is what is happening. A friend gave me his DELL Inspririon 531 2007 Desktop. It has a pirated copy of 7 ultimate x64 (which I am not sure if this supports 64 bit). Prior to looking into how old the machine was, I was able to install 8.1 64 bit. But it wouldn't allow me to install any drivers from the DELL site. Said that the machine wasn't compatible. So, I tried with Windows 7 32 bit and I am getting this error. I have deleted all partitions, but now, I do not have that option when I choose Custom-advanced. There is no Delete option.

A few times I got the error at 5% other times at over 60%. What can I do to get this to install? It is a legit DVD of windows. Why would it have allowed 8.1 to successfully install now it is doing this? What files are missing? I have tried both deleting the partitions and not deleting. Same result.

A:Clean install error Windows cannot install required files.

Install the correct version of windows that`s on the COA, either buy a new installer from Newegg or call Dell for Recovery CD`s.

The dvd you are trying to use is corrupted and no good.

Read other 9 answers
RELEVANCY SCORE 80

I have been trying to do a clean install of windows 7 and I am now getting this message. I have probably done a clean install using the exact same disk 5 times before. I've tried formatting the hard drive and re partitioning. This is a custom build.

The thing that is interesting to me is that I then tried to do a clean install using a vista disk that I have, and I get a similar message.

However I am able to install Xp pro just fine. I've also tried switching out memory as well.

Any suggestions would be appreciated.

A couple threads mention adjusting RAID settings in the BIOS but I see nothing regarding RAID in my bios.

A:Windows 7 Install - Cannot install required files... Error message

Try Cleaning the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation

Read other 1 answers
RELEVANCY SCORE 79.2

Greetings,
I have been using Windows Deployment services for sometime now so the environment is not new to me. For some reason every new WIM that I build now, when I try to apply it using WDS I get this error.

My Capture Process
Install A Clean Version of WindowsConfigure system how I want itsysprep into audit mode to remove user account that I built during setupsysprep OOBE and shutdownRun Imagex.exe /capture c: c:\imagename.wim "My Image Name" /compress fast /verify
I get the capture with no errors and upload to my WDS.
This error used to never be a problem but I am getting it all the time now.
Any idea how to fix? Sorry if this isn't the right place, I was told to come here over at SevenForums....

Read other answers
RELEVANCY SCORE 78.4

hi guys got an acer and a toshiba laptop that will not install windows 8.1 standard:

trying to clean install windows 8 standard
both come up with
windows 8 cannot install required files error 0x8007025d

things i have done/tried:
tested hard drives with seatools,both passed
i have reset bios settings
burned off another win 8 dvd
used a usb stick
tried different memory

can i assume the motherboards are faulty? or is there anything else you suggest i can try?
 

Read other answers
RELEVANCY SCORE 77.6

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 74.4

I do a clean install. Delete all the partitions, make a new one, format.Then "Copying files" takes approx 1 second. Then it does to "Expand" and gives me the error.Exact message:"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"

A:Error at "Expanding Files": Windows cannot install required files. 0x80070570

I resolved the problem I had. It appeared to be a memory chip. I do not know whether it is a bad chip or just a compatibility issue.I had 2.5GB of RAM: 1GB 800Mhz and the rest 512MB 688Mhz. I took out the 1GB and the install went through fine. Windows 7 is running just fine with 1.5GB of RAM on a 2.8Ghz Pentium D.

Read other 50 answers
RELEVANCY SCORE 73.6

I've spent the whole of today and yesterday trying to install windows 10 onto my SSD, it's not partitioned as i have read from various sites that the installation software will you all of that but everytime it get to the step after copying the files over i get the error 0x8007025D and nothing i've found online has worked.

A:failed during clean install Error Code 0x8007025D

I am having same exact problem??

Read other 14 answers
RELEVANCY SCORE 68.4

Hi everyone

I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.

I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.

However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:

Taking all but 1 stick of ram out and the graphics card.
Reseting the bios to default
Installing again without rebooting after error.
using cmd to select the right partition

Nothing has worked, please help me I'm losing my mind

A:'Windows cannot install required files' on Flash disk install to SSD

Hi,

Just to clarify, are you having trouble getting the ISO onto the USB drive? Im not sure whether that is your issue, or the installation from the USB. What size is the USB drive?

Can you have a look at this tutorial?

USB Windows 7 Installation Key Drive - Create

Regards,
Golden

Read other 4 answers
RELEVANCY SCORE 67.2

Greetings,

I have been using Windows Deployment services for sometime now so the environment is not new to me. For some reason every new WIM that I build now, when I try to apply it using WDS I get this error.



My Capture Process
Install A Clean Version of Windows
Configure system how I want it
sysprep into audit mode to remove user account that I built during setup
sysprep OOBE and shutdown
Run Imagex.exe /capture c: c:\imagename.wim "My Image Name" /compress fast /verify

I get the capture with no errors and upload to my WDS.

This error used to never be a problem but I am getting it all the time now.

Any idea how to fix?

A:(WDS) Windows Can not install required files

For better help on WDS, take a look the eightforums.
Windows 8 Forums

Read other 1 answers
RELEVANCY SCORE 67.2

Whenever I try to install windows I get an error saying, Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x080070001. I know there is nothing wrong with the iso I burned because I have used it to install Windows 7 on my laptop. Oh and if it helps I had Windows 7 on this computer before but my explorer.exe messed up and now it won't let me reinstall Windows. Anyone know what I can do to fix my Windows not installing?

A:Windows Cannot Install Required Files

are you trying to do a repair install or a clean install??

Read other 9 answers
RELEVANCY SCORE 67.2

Hi everyone!

i recently bought the Acer V3- 772G and after installing the heck out of the windows updates I could finally see the 8.1 update in the store. Clicked it, downloaded it, installed it - but then during that it jumps from approx. 5% to sth. higher, maybe 74%, I could only see that for a half second maybe, and then the old windows version gets installed. Error code is 0x8007025D - 0x2000C and I run a german version if that matters...
I tried the wsreset.exe, tried re-download and installation and also am logged into my microsoft account. Also tried to sync licenses in the store preferences. Nothing works.
Thank's in advance for any kind of help.

Paul
 

A:Solved: Windows 8 to 8.1 update error 0x8007025D - 0x2000C

Read other 16 answers
RELEVANCY SCORE 66.4

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/523124/cant-install-windows-7-suspecting-hardware-issue/ - Hamluis.
 
I'm having the same issue and hoped I could chime in. Since I've wiped my drive I've gotten a similar error as above. I've tried loading the drivers AFTER the error. Should I wipe the drive, do the install and try to install the drivers during?
 
Also how do I find out my system specs with no OS?
 
Thanks

Read other answers
RELEVANCY SCORE 62.4

Hey guys, im trying to do this (i have windows 7 installed first) but when installing vista, at just 2% i get this Windows cannot copy files error. Im installing from a bootable USB and i've already tried using a different 4gb usb, a different vista iso file, different programs to make my usb bootable and different partition configurations. Has anyone come across this? For some reason i think it has something to do with the System Reserved partition but i am not sure and i dont have the option to expand the partition. Attached is what disk management looks like. Win 7 is installed in C:
Thanks for you help guys

A:Windows cannot copy files required for installation. Error 0x80070070

Where did you get Vista? Check the HASH against official HASH.

Perhaps you can borrow an external DVD drive to try install.

I'm assuming you don't have a DVD drive or you wouldn't have gone to all the effort to try different USB writing methods. The one which always works for me is UltraISO trial version: Open ISO on file tab, Write Disk Image on Bootable Tab, Format, Write. Then boot under USB or HD's.

If this fails, I'd reset the BIOS CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

If this is a PC do you have another HD to try install upon? If so unplug Win7 and wipe the target HD first. Then after install plug back in Win7, boot preferred first in BIOS, then boot the other using BIOS Boot Menu.

Read other 5 answers
RELEVANCY SCORE 62.4

I have taken image of windows 7 from reference computer with Windows AIK tool and implementing that image to another Computer. While installing custom image i am getting an error Windows cannot open the required file F:\Sources\install.wim.

I was using following document to do the same
https://technet.microsoft.com/en-us/library/ee523217

Read other answers
RELEVANCY SCORE 60

Hi  I'm trying to do a clean install of windows 10 Pro 64 bit on my machine but I get Error code: 0x8007025D at some point,would really like some assistance with that.Thanks

A:Error code: 0x8007025D

Ramshaker wrote:Hi  I'm trying to do a clean install of windows 10 Pro 64 bit on my machine but I get Error code: 0x8007025D at some point,would really like some assistance with that.ThanksHi, This is a known issue for windows 10 OS. Heres the link that might help you with your concern https://answers.microsoft.com/en-us/windows/forum/windows_10-windows_install/solved-windows-10-error... Cheers!





"Education costs money; so does Ignorance"If my post has helped you, click the Kudos Thumbs up!If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Read other 1 answers
RELEVANCY SCORE 60

I was trying to restore a Dell mini-tower to an earlier restore point and received this Restore failed error 0x8007025d. This machine was upgraded from Windows 7 to 10 about 2 months ago and has otherwise been working fine.
What do I need to do to fix this error?
Thank you.

A:Error 0x8007025d while trying to restore

Try running sfc /scannow from an admin command prompt.
SFC Command - Run in Windows 10 - Windows 10 Forums
If it's unable to fix problems, try the DISM commands:
DISM - Repair Windows 10 Image - Windows 10 Forums
.

Read other 1 answers
RELEVANCY SCORE 60

Hi,

Windows 10 Home 64 bit

Forgive the long story, but I feel as much detail as possible is a good thing and I'd be really grateful for some help please!

A couple of months ago I decided to enable XMP mode on my Asus Z87 motherboard because userbench website reported that my RAM was Corsair Vengence clocked at 1800mhz and was running slowly. I checked the BIOS and sure enough, XMP was disabled and the RAM was running at 1333Mhz. Upon restarting, I recall quickly receiving a BSOD. I put it down to what I'd just done and turned XMP off again. I wasworried I'd overclocked and damage my RAM or something.

Since then, I started to notice the occasional BSOD - usually MEMORY MANAGEMENT, but not always. Kernal security one time, something about a corrupt page file. They were rare. One every few days, but more than I was comfortable with.

Fast forward to last week and the BSOD had gotten a little worse. Strangely, they never happened whilst doing something strenuous, like playing a graphically intensive game, but whilst browsing on Edge.

Now yesterday: having become bored of the occasional BSOD, I tried running sfc /scannow but it said resource protection couldn't complete the scan. I received a similar error running the DSIM fix to verify Windows 10.

I then noticed whilst working that MS Office then had weird problem - updates failed with a 'something went wrong' error. I tried uninstalling MS Office and received a similar error. A MS tech had no ideas. "S... Read more

Read other answers
RELEVANCY SCORE 60

Hello

Its like this i had win7 on this laptop
I formatted and installed win8
The problem was i also had a linux extended partition on this drive that i needed to get rid of
I managed to get rid of it with gparted but that ruined everything
Win8 would not boot any more
Tried reinstalling several times and always getting the error above
I have googled but what information i found was sketchy

A:0x8007025d error when installing

Can you reset to factory specs & start from scratch ?

Read other 8 answers
RELEVANCY SCORE 60

Hi guys... I am trying to do a clean install of Windows7 and after install began a window came up saying : Windows cannot install required files. Make sure all files required for installation are available and restart the installation.
My PC is a COMPAQ Presario 5700F, prebuilt, Windows7 .
How/where do I find the required files and such?
Thanx for your help.

A:Clean Install of Windows7 - cannot install required files

Hi and Welcome to TSF!

How are you going about installing Windows? Vis USB, CD, or a recovery partition?

Where did you get the copy of Windows?

How far into the installation does it get?

Read other 19 answers
RELEVANCY SCORE 59.6

Hi,

Windows 10 Home 64 bit - I'm afraid I cannot run the tool I'm supposed to to post in this forum, but that is because my PC is currently not usable. See below

Forgive the long story, but I feel as much detail as possible is a good thing and I'd be really grateful for some help please!

A couple of months ago I decided to enable XMP mode on my Asus Z87 motherboard because userbench website reported that my RAM was Corsair Vengence clocked at 1800mhz and was running slowly. I checked the BIOS and sure enough, XMP was disabled and the RAM was running at 1333Mhz. Upon restarting, I recall quickly receiving a BSOD. I put it down to what I'd just done and turned XMP off again. I wasworried I'd overclocked and damage my RAM or something.

Since then, I started to notice the occasional BSOD - usually MEMORY MANAGEMENT, but not always. Kernal security one time, something about a corrupt page file. They were rare. One every few days, but more than I was comfortable with.

Fast forward to last week and the BSOD had gotten a little worse. Strangely, they never happened whilst doing something strenuous, like playing a graphically intensive game, but whilst browsing on Edge.

Now yesterday: having become bored of the occasional BSOD, I tried running sfc /scannow but it said resource protection couldn't complete the scan. I received a similar error running the DSIM fix to verify Windows 10.

I then noticed whilst working that MS Office then had weird problem - updates f... Read more

Read other answers
RELEVANCY SCORE 57.2

Hi

I have a custom built (but fairly standard) desktop which has run XP (SP3) for many years. It started recently to hang after a couple of minutes, so I backed up my data and tried a reformat (ntfs) and reinstall of XP.

I can get as far as it finishing the reformat of C: but then it hangs before starting reinstalling XP.

Any ideas? If this is likely to be a hardware problem, can Admin move it and let me know?

Many thanks

Gav

A:XP install hangs at 'please wait' while it gathers required files

What are the specs of the computer? It could be a hard drive issue.

I would run a diagnostic scan on the hard drive. Go here and find the appropriate tool.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

-Coolfreak

Read other 2 answers
RELEVANCY SCORE 52.4

hi there, this question may of been asked elsewhere. What files and folders does Windows need to run? That doesn't include Microsoft Works/Office, just THE basic things that are needed for Windows to actually 'be alive'.

A:Required Windows Files

Not to avoid answering your question, which at first seems a rather simple one to answer but turns out to be somewhat complex, but why are you asking this question? And there are different interpretations about what it would mean for Windows to "be alive," since it could be alive, but not DO anything.
Regards,
John

Read other 5 answers
RELEVANCY SCORE 52.4

hi guys,

i have always wanted and forgotten to ask this...

how come sometimes when i install windows xp...and just install a few programs
i get this box coming up saying "files that are required for windows to run properly
have been replaced" bla bla...then it asks for the cd...and nothing
happens, despite the correct cd being in the drive...what do i have to do here?

any input please...
 

A:files that are required for windows to run...

Read other 6 answers
RELEVANCY SCORE 51.6

Whenever I try to install Windows 7 Ultimate 64 bit I get this error: Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570 I know my memory isn't bad because I've run memtest for a few hours already. So how do I fix this problem? I have installed WIndows 7 on my computer before with this same exact installation cd.

A:Windows Cannot Installed Required Files

hi i am having the same problem i have 64 bit installed on my laptop (they didn't have 32bit in stores) so i downloaded the 32 bit version burnt it to a disk go to install and i has the same error message. we are having the same problem.

hopefully some one can help us.

Read other 9 answers
RELEVANCY SCORE 51.6

Deploying a Windows 8.1 Enterprise image on Dell Venue 11 (5130 atom version)
Created an UEFI FAT32 USB drive (http://rufus.akeo.ie/?locale=en_US)
I replaced sources\install.wim with a customized Windows 8.1 image.
The customized image is 4,6GB large so i had to split it into 2 .swm files because of the FAT32 4GB limitation.
Setup is starting and when i want to install, the following error occured and i have to cancel the installation.
"Windows cannot find the Microsoft Software License Terms.  Make sure the installation sources are valid and restart the installation"
is there a file which points to the license terms that i can modify or something like that??

A:Windows 8.1 install from USB with multiple swm files license terms error

Hi MartinOtter,
Windows 8 and 8.1 Setup does not support split .wim files, so this might have been the original problem. The TechNet article "Split a Windows Image (.swm) File to Span Across Multiple DVDs"
has this note:
In Windows 8.1 and Windows 8, Windows Setup does not support installing a split .wim file.
And later it states:

You can apply the file to your destination computers only by using the /Apply-Image option in the DISM tool.

If you are still having issues with this deployment while using a .wim that isn't split, can you
check the log files?

Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

Read other 7 answers
RELEVANCY SCORE 51.6

I have an Aspire 5742 with Windows Home Premium. I have just replaced the hard drive as it would no longer start up. I made a drive backup some time ago using Acronis True Image after the laptop was setup with all my programmes. After I installed the new hard drive I ran the Acronis recovery to copy the drive backup to the new hard drive and it reported complete but when I try to boot the laptop it says bootmgr is missing. So I need to now repair the Windows 7 installation but Acer only supply a factory default option not a Windows 7 installation disc. I don't want to do a factory default as I have a programme installed that will cost $200 per hour in support fees for the software vendor to re-install it again. I contacted Microsoft about getting a Windows 7 disc but they said because it is OEM I have to contact Acer. Between the two of them they sent me around in circles until it was established that neither of the two companies could help me. So what do I do now please?

Read other answers
RELEVANCY SCORE 51.2

Hi! When I try to install Windows 7 it gives me an error that says A required CD/DVD driver is needed after clicking install now. I am running Windows 10 on a Lenovo Flex 3-1130. I am trying to dual boot windows 10 and windows 7 together. It has a UEFI bios and the windows 7 iso is formatted on a flash drive. I have a legit key for it and the iso says it is untouched.

A:Windows won't install, a required CD/DVD driver is needed

Did you follow this tutorial?
USB Windows 7 Installation Key Drive - Create

Read other 2 answers
RELEVANCY SCORE 51.2

Hi,

Does anybody know if there is a winrar or type prog that is available for free download ?

Or something that can do the job of opening these downloads please ?

thanks,

A:Fresh install of windows 7...winrar required ?

7zip.

Read other 2 answers
RELEVANCY SCORE 51.2

I'm trying to install either the 32bit and 64bit version of Windows 7 Home Premium via DVD onto my system. I am booting from the DVD and setup automicatically runs.

The Windows 7 setup GUI loads and it allows me to choose the language settings and then I get a prompt for,

LOAD DRIVER
"A Required CD/DVD device driver is missing...."

My System is
ASUS A8N-SLI Deluxe motherboard
AMD Athlon 64FX-55
3GB RAM
ASUS DRW-1814BLT DVD-RW drive (SATA)
2 x Hitachi Deskstar 250GB HDD in Serial ATA RAID 0

I have tried multiple drivers but there is nothing on the ASUS website for the DRW-1814BLT only a firmware upgrade which I have done.
This is extremely frustrating as both the motherboard and DVD-RW driver are from ASUS but there doesn't seem to be any support for Windows 7 on the download site.

My system passes the Windows 7 upgrade Advisor Report

Any pointers in the right direction would be appreciated
Dragonheart

A:Windows 7 fails to install - Required CD/DVD device dri

same problem with me

Read other 9 answers
RELEVANCY SCORE 50.4

Disclaimer:
 
If I am not in the correct place, please bump and I ask your forgiveness for messing up your day with an ill-placed post. 
 
Hello and thank you in advance for being able to assist in any way with this issue. 
 
I have a very old machine. It's a Compaq SR1503WM, all OEM hardware. I received it from the owner that bought it from the store. I didn't have it long before I got an error message about the hal.dll file missing. I fixed that issue. It is just a machine I use to put some light emulators on for classic roms. It has no internet, not even a wireless card. (I'm saying this to assist you in ascertaining that this is NOT a virus, malware, spyware, adware, ect) 
 
It was running fine until it suddenly began restarting, booting, being on Win Xp for about one minute, then doing it all over again. I gave it a hard shut down to stop the loop and restarted. At this point, the fans would rev, then slow (no bios noises) and the light on the front with flash 6 times, rest, 6 times, rest, ect. At this point I cracked the case, checked my seating, heat syncs, reseated everything, and removed a stick of ram that I had put in it at first (which worked at that time) when I received it. After reseating and removing the newer stick of ram, it would come on, at least, but it came up to a message that windows could not start because I was missing my windows/system32 files. 
 
I know that was a long preamble to my question, please for... Read more

Read other answers
RELEVANCY SCORE 50.4

Hi !
I have just downloaded windows 8.1 pro .....
And maked a bootable DVD .....
When I install the Windows 8.1 pro
There is a box of "Install Now"
When I just click on that....
Then the screen appears ,....
And on the screen at the bottom of the screen there is written that setup is starting and suddenly it shows that ......
Windows cannot open the required file source/install.wim.
Make sure all files required for installation are available, Error code: 0x80070570.......
And I checked on the bootable DVD in the boot folder and then in the source.....there is install.wim is available.....
Now .....
What can I do to fix this problem.....
Please help me !!!!!
I am in trouble !!!!!
Please Help Me !!!!!!!!!!!!!!!!!!!!
Please Answer fast...... Please......

Read other answers
RELEVANCY SCORE 50.4

Windows 7 has Directx11 already built in, but to play the games developed with DX9 we need to install DX9.

I've been looking around whether It's recommended or even required in windows7, to have windows Service pack 1 installed or not prior installing DX9, and I found no answer.

this question may sound stupid but when you go to download page of for example, C++ redistributable or .NET framework it says that you need SP1 and all the updates installed, so I'm just gessing whether is this the case for DirectX9 as well?

If you can provide some kind of readme, referece or your experience I'll be thankfull to u

Thank you for your explanation!

A:Is Win7 SP1 Required/recommended to install DirectX9.0c in windows 7?

No, it's not required.

Download: DirectX Redist (June 2010) - Microsoft Download Center - Download Details

Read other 1 answers
RELEVANCY SCORE 50.4

Hey there,

I just got my notebook back from support since my harddrive failed last week.

So, since I'd have to reconfigure everything anyways, I'm thinking about installing Windows 8.1, which I can get through a student program of my university.

The preparation stops at the drivers, though, since I can't find any drivers for Windows 8 and my model.

Note that my model is an L650-1L4 and was originally shipped with Windows 7.

Has somebody here maybe some experience with this?
Are the generic drivers included in Win8 sufficient to be able to work - and play games - flawlessly?

While I could easily wipe the Win8 installation and reinstall Win7 again, I like to be prepared, and since I'm leaving this weekend for a small vacation, I'd like to have a working notebook with me.

Thanks for your help!

Message was edited by: CGundlach

A:Some tips to install Windows 8.1 on Satellite L650-1L4 required

Hmmmmm...... it can be a bit complicated. I?ve checked Toshiba download page and your notebook model is not supported for Win8. I?ve checked some other models with similar hardware configuration but they are not supported for Win8.

I really don't know what to say. If you have created recovery disc (Win7) install Win8 and check how it works. Some Toshiba specific tools and utilities you can download from other models in hope everything will work well.

Anyway I think you should stay on Win7.

Read other 2 answers
RELEVANCY SCORE 50.4

Hi all,

I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:

Found problems with source files.

Can't find file D:\sources\boot.wim
Can't find file D:\sources\idwbinfo.txt
Can't find file D:\bootmgr
Can't find folder D:\boot\
Can't find file D:\sources\install.wim or file D:\sources\install.swm
Total errors: 5
I hope someone can help me out! Thank you in advance

A:Windows cannot open the required file D:/sources/install.wim! HELP!

There are obviously corrupt files on the stick. There could even be a problem with the stick itself.
I would try again using Windows 7 USB/DVD Download Tool.

Read other 6 answers
RELEVANCY SCORE 50.4

My present Windows 7 computer has the C: Drive (OS) and two additional storage drives, D & E. When getting reading to do a clean install of Windows 10, is it necessary to electrically remove the storage drives in case of any conflicts, if any, during the installation of Windows 10 or can they remain intact during the clean installation of Windows 10?

A:Removal of storage HDD required for clean install of Windows 10

Removing drives that are not needed for the installation is a prudent move. Else e.g. your bootmgr could end up on a drive where you don't want it.

Read other 1 answers
RELEVANCY SCORE 50

Here's the story..
1. I was configuring Outlook 2003 to receive/send my gmail.
2. I was having problems so I was recommened to visit the Windows Update site to check updates that I may be missing.
3. In the middle of windows checking for updates I was told that it had an error completing the scan.
4. Since then, my computer is EXTREMLY slow to start.
5. When I go to Microsoft to check for updates it tells me:
Files required to use Windows Update are no longer registered or installed on your computer. To continue:

Register or reinstall the files for me now (Recommended)
Let me read about more steps that might be required to solve the problem
6. Other problems that I am having:

when I move my mouse to the taskbar it turns into a double arrow and I can't click anything.
sometimes the taskbar just disappears.
often my mute button on my keyboard won't work.
I cannot access a number of sites via IE that require login - gmail,, igoogle, blogger, facebook and ebay. The moment I click to login I get "Internet Explorer cannot display the webpage."
HELP!!!!!!!!!!!!!!!!
 

A:Files required to use Windows Update are no longer registered or installed on your co

Try here:

http://forums.techguy.org/windows-nt-2000-xp/710251-windows-update-solutions-revisited.html
 

Read other 2 answers
RELEVANCY SCORE 50

Hi,

I have a known working image of Windows 7 on a flash drive.

However, if trying to install Windows 7 by booting from the flash drive I get "a required cd/dvd drive device driver is missing usb"

I have tried removing and reinserting the usb.

I found a link https://downloadcenter.intel.com/dow...reator-Utility

that is supposed to put the drivers for usb 3.0 in the installation files. That did not work.

I have tried downloading the usb files from the manufacturer Acer for usb 3.0 and then navigating to them via browse and found files that showed up, but that did not work.

I also tried installing drivers for AHCI, CardReader, Chipset by clicking browse and navigating to the hard drive. All to no avail.

I am now going to see if putting the USB driver files on the flash drive will work. Would this make a difference? And should I potentially try this with the other driver files as well?

Any thoughts or suggestions would be appreciated.

A:Windows 7: USB install - a required cd/dvd drive device driver is miss

Why can`t you install with a DVD ?

Another laptop without an optical drive ?

What system was on it ?

Read other 1 answers
RELEVANCY SCORE 50

I decided to test out the Windows 10 Technical preview but a program I need doesn't work with Win 10 TP.
So I decided to attempt a factory reset however when I started the reset it took about 4 hours to do something I don't know what then I entered my BIOS to select the Windows 7 DVD as a boot drive so it loaded up then it come up saying...


A required CD/DVD drive device driver is missing. If you have a driver on a floppy disk, CD, DVD or USB flash drive, please insert now.

Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.

-----------------------------------------------------------------------------------------------------------------------------The problem I have is I don't know if I have done something wrong or anything all I know is I followed the steps given to do a factory reset but now this is happening this has happened before when trying to install Windows 8.1 but I gave up the reason I am trying to go back to windows 7 is because I have been given support from Microsoft to fix the Windows 8.1 install and a program I need to use won't work.

Thanks in advance

Alex Drone HD Taylor

A:Windows 7 Install A required CD/DVD drive device driver is missing.

Where did you get your installation media? That happens sometimes when the ISO file is bad or the burn to DVD is bad.

Read other 2 answers
RELEVANCY SCORE 50

I used DBAN to wipe my hard drive and i forgot to back it up. I do not have the CD for Windows 7 installation, therefore I created a bootable flash drive for Windows 7 64bit. I can't figure out what drivers is needed to continue on the installation. It says: "a required CD/DVD drive device is missing. If you have a driver Floppy Disc, CD, DVD, or USb Flash Drive, please insert it now."

Here is the information on my laptop I retrieved off the website.

HP Pavilion dv6t-7000 Select Edition Entertainment Notebook PC includes:
• Windows 7 Home Premium 64-bit
• 2nd generation Intel? Core™ i5-2450M Processor (2.5 GHz with Turbo Boost up to 3.1 GHz)
• 8GB DDR3 System Memory (2 Dimm)
• Microsoft? Office Starter: reduced-functionality Word/Excel? only, No PowerPoint?/Outlook?
• Intel? HD Graphics
• 750GB 7200RPM Hard Drive
• 32GB mSSD Hard Drive Acceleration Cache
• No additional security software
• 6 Cell Lithium Ion Battery
• 15.6-inch diagonal HD BrightView LED-backlit Display (1366x768)
• SuperMulti 8X DVD+/-R/RW with Double Layer Support
• HP TrueVision HD Webcam
• 802.11b/g/n WLAN

1) it get to the "windows is loading files..." black screen (starting from CD/DVD drive)
2) get to the starting windows, with the Windows 7 loading screen thing where the balls of light come together
3) get to the first window to install Windows 7, titled "install windows"
options:
- lan... Read more

A:Install USB Windows 7 asks for required CD/DVD drive device is missing

Do this Command Prompt at Startup
In that command prompt:

Code:
diskpart
list disk
exit
Do you see the internal disk where you want to install win7 on (look at size to know)?

Read other 9 answers
RELEVANCY SCORE 49.6

Hi guys, I'm trying to install the 32 bit version of 7 on my toshiba m700. For the past half year or so, I ran the RC just fine with no trouble. Then all of a sudden, my computer shut off and when I would turn it on I got a disk read error. The ITS department at my school reimaged the computer with XP, and it worked. Since then, I've tried to reinstall 7 doing a clean install, but everytime the computer says "cannot install requiered files.". I'm certain the iso is not corrupt: I've tried a cracked version, the enterprise trial, and the iso I downloaded for $30 with the student discount. I've tried burning a DVD and booting off a flash drive multiple times. Every rime I get the same error. I have 1 hard drive and 1 DVD drive attached; I don't know what kind they are. I also heard that removing ram may solve my problem, I'm wary of doing that because it may void my warrenty and then my school's ITS department may not service my computer anymore: they don't like me running 7 in the first place. I ran the RC fine, why can't I install the real version? If all else fails, I could reinstall xp, which does install without errors. I'd really appreciate the help.

A:"Cannot install required files" -- Tried everything

When exactly does it throw up the error? What is the exact wording?

Try running the Win7 installer from the Xp desktop, if you haven't done so already.

If you ran cracks on that HD, then you may need to use DBAN to nuke the HD for the deepest clean.

Then try booting the WIn7 installer for custom install again.

Boot into BIOS settings and see what the SATA controller setting is. Try AHCI first.

Do you have another laptop? Sometimes rather than spending days of frustrating endless troubleshooting, someone who is tech savvy can just snap the HD into another laptop and install there, then return to your machine to enjoy the show as it swaps out all the drivers, requesting restarts. It has worked a dozen times for me.

If you do this, wait to activate until you get it back into the old machine and reaclimated to the hardware there.

Read other 4 answers
RELEVANCY SCORE 49.6

I have noticed this issue today.  When I was moving some files from my phone to my laptop, it displayed the message "calculating the time required to copy the files," loaded more time than it should have, and then did the transfer. This has never happened before.  It normally just jumps right into the file transfer process without that delay.  Does it have something to do with the amount of files in a folder or something else, because I just dd a transfer of two zipped files and they did not display that message.  Can someone explain why my computer displayed this message?
 
Windows 7 (64-bit)

A:annoying "calculating the time required to copy the files message" on windows 7

Yes - you are correct, it is the quantity of files. As far as I know, it will do this for one little text file as well, but since the time taken for the calculation is so short, the message doesn't have the time to show.
 
Obviously, since the time taken for calculation depends on the amount of data, there comes some critical level when the time is long enough for the message to show. You get the same thing when moving files between drives inside the computer. Internally, on my own computer, it seems to be about 250Mb.
 
Chris Cosgrove

Read other 2 answers
RELEVANCY SCORE 48.8

anyone please help me before this i'm able to format my laptop into windows 7 ultimate x64 bit but now when i'm trying to format using the same dvd windows installer a message prevent me from format "required cd/dvd drive device driver is missing". i also downloaded a new iso and burn it into a new dvd and also usb but both with the same results. then i borrowed my friend dvd installer and it works i can install windows. now i want to format it again download a new iso but that error still prevents me from installing new windows help please

A:"A required CD/DVD drive device driver is missing" error install win

What operation system did your Laptop come with?

Where are you downloading the ISO for Windows 7 from?

Read other 3 answers