Over 1 million tech questions and answers.

ThinkPad T450s won't boot up after a Windows updat...

Q: ThinkPad T450s won't boot up after a Windows updat...

My year-and-a-half old T450s stopped booting up. Yesterday I was prompted for a Windows update and restarted the machine, as usual. After the update, I'm able to turn it on but it wont boot up. It shows the initial screen, with the "Lenovo" logo and won't proceed beyond.I tried taking out one battery and then holding the on/off button for 30 seconds, and also the emergency reset on the bottom, but neither changed anything. It simply won't go beyond the initial screen. Does anyone have any thoughts? Thanks in advance.

RELEVANCY SCORE 200
Preferred Solution: ThinkPad T450s won't boot up after a Windows updat...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: ThinkPad T450s won't boot up after a Windows updat...

I think you are experiencing the same issue I have. If you notice after the Lenovo boot logo the display still stays on its just black, what it appears to be for me is a video failure after trying to update to windows 10 anniversary update. Try plugging in an external monitor and see if you get display, I did in my case. Remove your hard drive and restart the PC, this should get the bios working again, go into your bios and disable secure boot so you can boot to a USB. Create a bootable USB 3.0 using a USB3.0 drive (formatted to NTFS) from Microsoft's site - https://www.microsoft.com/en-us/software-download/windows10/ Then goto repair my computer and choose rollback update, this will get you running again. I have a p50 with Nvidia M1000M dedicated graphics, so I am still trying to figure out if this is a driver issue.

Read other 1 answers
RELEVANCY SCORE 66

Hi all,I've really been helped by this forum in the past, and really hope you can help with this issue.I've installed the card and installed the driver - all of which has gone down without a hitch. The compute recognises the card with no issues. Unfortunately, however, when a simcard is inserted it does not register the simcard whatsoever - 'Insert sim' is still present.In my searches on this forum it seems this problem is Windows 10 specific - the system does recognise the wireless card but does not recognise the simcard reader. Anecdotally, it seems to work for others when using Windows 7 (although that wouldn't be a fantastic solution in my situation.)Is there any solution for this?Thank you in advance for your time and any responses!Jack

A:Lenovo Thinkpad T450s, Sierra EM7345 and Windows 1...

Hello, jraynerwin10 doesn't need wwan card's manufacturer drivers for the normal mobile connection, it has a native support that. Additional drivers are needed for the legacy location features via NMEA port, for the custom wwan card virtual devices configuration (like NDIS port etc).So, the 1st thought modem firmware is outdated. Check it out:open command prompt window (cmd) and type in the following stringnetsh mbn sh cap int=*Copy and past an output here (remove Device ID for your privacy).Another version is connection settings, APN mainly. Do you see a cellular network item in the win10 network settings?Anyway, I hope mobile device em7345 is present in the Device Manager w/out errors.

Read other 2 answers
RELEVANCY SCORE 59.2

As I understand, hardware fde works by using a media encryption key that is stored in the disc controller.  Access to this key is controlled by a key encryption key which the user should be able to set.  (Without setting this key, fde is pointless as the drive will boot without any user intervention). How does one set the key encryption key on the T450S?  And can it be configured so the key has to be re-entered after the wakes from sleep or hibernation, as well as at boot time. Thanks,

Read other answers
RELEVANCY SCORE 59.2

Introduction The ThinkPad T450s is one of the best new ultrabooks. While it's not as thin as some, it's still quite compact, and much easier to service than thinner machines, and the Full HD IPS screen is a standout feature.This review is based on a production ThinkPad T450s, Machine Type 20BX, Product ID 20BXCTO1WW. Intel Core i7-5600U ProcessorWindows 8.1 Pro 6414.0" FHD (1920 x 1080)720p HD CameraIntel HD Graphics 55004 GB DDR3L - SDRAM 1600MHz BaseFingerprint Reader500GB Hard Disk Drive, 7200rpm, 2.5"ThinkPad Battery 3 cell Li-Polymer (23.2Whr) FrontThinkPad Battery 3 cell Li-Polymer (23.2Whr) RearCountry Pack 45W AC adapter United States (2pin)Intel 7265 AC/B/G/N Dual Band Wireless + Bluetooth Version 4.0After receipt: 4 GB Samsung SO-DIMM was installedHard disk was replaced with 1 TB Samsung 850 EVO SSD.ConstructionQuality of T450s construction is not up to old ThinkPad standards, with some obvious cheapening, but is still pretty good. Annoyances include the difficulty of prying off the bottom cover (after removing 8 screws) to get to the inside, and fingerprint-revealing textured plastic instead of the old rubberized finish. But it's quite solid, no flexing, and quite compact.ConnectivityPort layout is reasonably good on both sides with nothing on the back. All USB ports are 3.0 with excellent performance. But Mini DisplayPort means you may have to buy and carry an easy-to-lose dongle. Wi-Fi performance (Intel 802.11ac 2x2) seems better than earlier gene... Read more

A:ThinkPad T450s Review

Belkin Mini DisplayPort to HDMI Adapter is available at low cost from B&H.




Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]

Read other 9 answers
RELEVANCY SCORE 59.2

Hi all, I want to know if the same issue happens to you. Well my thinkpad t450s becomes hot while it's connected to AC adapter.The laptop still new, and I've been strugled with this problem for awhile, the laptop becomes very hot prevents me to hold it.I don't know is this normal, if not what you suggest me to do? Thank you

Read other answers
RELEVANCY SCORE 59.2

I can't find anything that looks similar or even a part online ( troubleshooting ).Is it built in to the LCD screen itself or is it on the laptop like most are?













Solved!

Go to Solution.

A:Where is the LCD Inverter for the Thinkpad T450s?

CalebNelson wrote:
I can't find anything that looks similar or even a part online ( troubleshooting ).
Is it built in to the LCD screen itself or is it on the laptop like most are?

 
Good day.
 
I believe the panel is LED-lit, therefore no inverter. There is no mention of an inverter that I can find in the HMM, either: https://download.lenovo.com/pccbbs/mobiles_pdf/t450s_hmm_en_sp40g54937_01.pdf
 
Regards.

Read other 2 answers
RELEVANCY SCORE 59.2

Hello everyone,I used the Lenovo service to reinstall my Thinkpad T450s which is blocked despite all attempts.For that they sent me the 3cd restoration.The problem is that the T450s does not have a cd drive, so how?Can anyone give me the way to operate to give windows7 Pro and the rest on the existing SSD dd.Thanks for your help.

A:Restore a Thinkpad T450s with 3 cd

It may not have a DVD drive, but it surely supports USB DVD drive. As your friends - maybe someone have it already.If not, then you might consider buying one - they are rather cheap. 

Read other 1 answers
RELEVANCY SCORE 58.4

 hello, i have an t450s about 2 weeks. so it was all fine, until yesterday. now some buttons refuse to work (even in BIOS), to be more precise (M, N, H, G, T, R, F1 and arrow keys), the rest work just fine. my FRU is 04x0151. do you have any ideas what it could be?

Read other answers
RELEVANCY SCORE 58.4

I'm struggling to identify whether my T450s is compatible with Samsung's 970 PRO SSD.  I am looking to upgrade my hard drive yet I am unsure whether or not this item is compatible with my device. Does anyone know whether this SSD is compatible with the T450s? Thanks in advance.  

Read other answers
RELEVANCY SCORE 58.4

HiI have a Thinkpad 450s with a WWAN card in it and have been using 4g quite a lot. It turned out that when my computer was on and connected to 4g it blocks phonecalls for my phone as i use a twin simcard with my phone. I thought it could have something to do with my drivers for the WWAN card, but when i downloaded the sierra software and drivers my 4g stopped working and the WWAN card seems to have dissapeared from everything, even the device manager. i tried uninstalling the software, but that didn't help. Does anyone know what it can be?

Read other answers
RELEVANCY SCORE 58.4

Der Lenovo Community I started having this Problem a few months ago. That half of my Laptop has Lines over it. I searched everywhere on the Internet but have found no reason or explanation for it yet. If you need any Infos Just write Down below what you want Please Help


























14820077757151935267418.jpg ?1197 KB

A:White Lines on Thinkpad T450s

The contact tape is loose or delaminating on the connections on the rear of the panel.  Do you have a warranty?

Read other 1 answers
RELEVANCY SCORE 58.4

buenas tardes mi lenovo tiene entrada de sim la cual no reconoce le meto un chip y no entra a internet cual seria la solucion ayuda 

Read other answers
RELEVANCY SCORE 58.4

I got frequent BSOD a few months ago, but fixed it by updating some of my drivers. I got another BSOD today with the error IRQL_NOT_LESS_OR_EQUAL while using google chrome. I have attached the DM Log files.

DESKTOP-92VPPHA-Thu_03_10_2016_131322_22.zip

Any help would be appreciated!

A:ThinkPad T450s error: irql_not_less_or_equal

The driver for Intel(R) Dual Band Wireless-AC 7265 caused that BSOD.

Search for any possible updates here: Drivers Software
_________________________________________________________________

Code:
BugCheck D1, {99, 2, 0, fffff80159434e74}

*** WARNING: Unable to verify timestamp for Netwtw02.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw02.sys
Probably caused by : Netwtw02.sys ( Netwtw02+34e74 )

Followup: MachineOwner
---------

Code:
Image name: Netwtw02.sys
Browse all global symbols functions data
Timestamp: Tue Jan 05 14:58:43 2016 (568B8CCB)

Read other 0 answers
RELEVANCY SCORE 58.4

I purchased my t450s but after i used it for two months. one morning the screen started blinking for about a minute and after that is does not display anymore. It works when connected to an external monitor. I tried all that I could but the screen won't display

A:ThinkPad T450s screen does not display

Hi Senyo,
 
Welcome to Lenovo Community! And happy to have you here.
 
As I understand that you are facing issue with your display in T450s.
Looks like you have a bad LCD panel & it needs to be changed so better contact Lenovo & replace under warranty.
Also you can try moving the LCD lid at certain angle whether display is coming or not.
 
I hope the above information helps.
Please feel free to post in Lenovo Community Forums if you have any further queries!
 
Regards,Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 1 answers
RELEVANCY SCORE 58.4

Hi! I have bought a T450s with Win7 and a ThinkPad USB 3.0 Pro dock recently and I have had some problems with the dock.BIOS and drivers are up to date on the computer and the dock can work sometime but only when the dock itself installs drivers from Windows update. If I disconnect the dock from the computer more than a couple of minutes it won't work again, it shows up on Devices and Printers but the external screen, ethernet, mouse and external keyboard wont work anymore. What I've discovered is:- When the dock works there is atleast 5 different things listed under the hardware tab of the device (can't remember what, and I can't get it working again)- When it's not working but the dock shows up on the Device and Printers there is only 2 things listed under the hardware tab, USB 2.0 nav and USB 2.0 nav. These are also listed there when it works.- I don't know why the dock doesn't run on USB 3.0 at any point.- When the dock works I can't update the firmware, it just says "No device found" when running the firmware update. What I've done so far:- Completely removed/reinstalled all drivers several times- Checked that BIOS is up to date- Checked in the BIOS if USB 3.0 is enabled- Sent the dock back to Lenovo and have gotten a new one, still same problem.Anyone have some ideas of what's wrong? Google and I'm running out of ideas..

A:T450s and ThinkPad USB 3.0 Pro dock issues

I hear you. I have the same problem with a T460s. And so far i have done the same thing. However, it's working on other 2 computers same model without a single error. And also i have a Toshiba Windows 10 computer, that I just plugged in and the drivers were downloaded through Windows Update quick, it was completely a plug and play experience.  But on Windows 7 doesn't seems to work... I don't know what's going on. It still shows up  as USB 2.0 hub 

Read other 1 answers
RELEVANCY SCORE 58.4

I recently bought a Thinkpad T450s with the default TN 1600x900 screen. The screen was not bright enough to use it outside, so I decided to buy a replacement IPS 1920x1080 screen on Ebay and install it myself. I ordered this screen, which was supposed to be an LG LP140WF3SPD1 with the max brightness of 300 nits, but the seller sent an Innolux N140HCE-EAA, which only has a max brightness of 250 nits. Needless to say I am disgusted with the deceptive advertising of the seller "laptop_screen" so I want to alert anyone else who is shopping for a replacement screen to avoid this seller on Ebay. Apart from that, I want to let everyone know that the Innolux N140HCE-EAA screen will work in the T450s and the viewing angles are good. I don't have enough experience to be able to say whether the color quality is good or not, but I can tell that the screen isn't very bright.In Windows, the N140HCE-EAA does not allow me to change the brightness of the screen, because the data in the screen's EDID does not match what the laptop expects.  I have read online that this problem also occurs when installing the LG LP140WF3SPD1 in a T450s that originally had a TN 1600x900 screen, so this isn't a problem with the N140HCE-EAA part. In Linux I can adjust the screen brightness since Linux ignores the EDID data when setting the brightness. Since I use Linux, I have no problems, but this is a problem for Windows users. I have not tried to overwrite the EDID data, so I don't know whether the ED... Read more

Read other answers
RELEVANCY SCORE 58.4

I have thinkpad t450s and it has sim slot but when i inser the sim it does not detect or recognize nothing is shown,this is the mechinetype 20B  and product is 20BW000DMN, is there anyone who has an idea about this problem. ThanksMo

A:thinkpad t450s sim card does not detect

Good day and welcome to the community.
 
Looking at: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-T-Series-laptops/ThinkPad-T45...
 
specifically, the Machine Info section:
Processor: Intel Core i7-5600U Processor(i7-5600U) | Memory: 4GB DDR3L 1600 | Operating System: Windows 7 Professional 64 preinstalled through downgrade rights in Windows 8.1 Pro 64 (EN: English, FI: Finnish, SV: Swedish, DK: Danish, NO: Norwegian) | Hard Drive: 256GBOPAL2.0 | Wireless Network: Bluetooth Version 4.0; Intel Wireless 7265AC(2x2)+BT4.0 M.2 Combo | Ports: 1 integrated VGA port; Ethernet; Microphone/Headphone Jacks; Display Port with Audio, MiniDP; 3 USB 3.0 | Camera: 720p HD Camera | Monitor: 14.0 FHD | Included Warranty: 3Yr Onsite Intl
 
I don't see that there is a WWAN card listed as part of the defined configuration. Did you add a card after purchasing?
 
Regards.

Read other 1 answers
RELEVANCY SCORE 58.4

Video freezes when the laptop is on battery, when moving mouse it continues to play. Audio plays all the time. Overall performance slows down terribly. Windows won't close or open until move the mouse. Videos won't play on 3 Web browsers and if plays from hard disc

A:Lenovo thinkpad t450s won't at video when on bat...

do you have anti virus installed? also have you updated the drivers, and the bios?

Read other 3 answers
RELEVANCY SCORE 58

A customer recently brought in the Lenovo Thinkpad T450s because the screen was failing.When I hook up the new screen, there is no display at all.And so I connected an external monitor through the VGA Port ( To boot the system into safemode to try to reinstall the display driver ), however the external monitor only displays a black screen and the mouse cursor and nothing more.Any thoughts on the issue? The fn+f7 combo is supposed to switch your display to external, but without being able to access the desktop due to the laptop screen display issue, it won't allow me to switch.

Read other answers
RELEVANCY SCORE 58

So i bought the laptop 14 months ago and it is now out of warranty. I've just started to get "Kernel security check failure", "driver unloaded without cancelling pending operations" and "unexpected kernel mode trap" errors.  the computer will then just restart itself.  any ideas on what i need to do?  thanks in advance.

Read other answers
RELEVANCY SCORE 58

A customer brought in the their Lenovo Thinkpad 450s because their screen was failing.They already had purchased a new screen and gave me the e-mail confirmation from the order that showed that it was the correct screen that they needed.However, the new display is still black.When I hook up an external monitor, nothing but a mouse pointer shows.But I can connect to the external monitor if I power on the laptop and then immediately close the lid.The external display then shows the desktop.But then I lift the laptop lid, the laptop screen is still black. Even when I change the display settings to extend the desktop.  There was one brief occurrence with the new screen, where I saw a very faint lenovo logo appear when the splash screen loaded. But then it went completely black again. And has not done even the faint image since, it was just a fluke occurrence.And when I shine a flashlight, I still see no display. While the external monitor is displaying the desktop and I then reopen the laptop lid, the laptop screen is recognized as being there. ( Display settings, shows monitor 1 and 2 ).But the laptop screen is still black. Any thoughts? Is there a lid sensor or magnet that activates the screen? I can't find anything.

Read other answers
RELEVANCY SCORE 58

Hi,Almost 2 months ago I bought a thinkpad t450s and a few days later it stopped working. I handed the laptop to the service of Argentina, until today not repaired.The local Lenovo representative told me that the computer will not be repaired and wants to return the money in local currency and not in the currency in which it was purchased.If I take the computer to the service of another country, can I have an effective solution to this problem?

Read other answers
RELEVANCY SCORE 58

The FP reader does not work on my T450s under Windows 10, even though the drivers "Synaptics FP Sensors (WBF) (PID=0017)" are installed correctly.I can get into the Windows Hello Fingerprint Setup (snapshot below) but the FP reader doesn't do a thing.Following the steps suggested in Fingerprint-support-on-Windows-10-ThinkPad-T440-and-newer does not change anything. The notebook is brandnew and I didn't have Win 7 or 8 on it before for testing the FP reader, but the driver installed without any issues -- so I guess it's not a hardware problem. I'm happy for any suggestion. 










Solved!
Go to Solution.

A:Fingerprint reader not working on ThinkPad T450s u...

Issue resolved. It was indeed a hardware problem.

Read other 1 answers
RELEVANCY SCORE 58

Hi, I bought a Thinkpad T450s last June. I wiped out the windows installation and installed Ubuntu and encrypted the drive for work. Now I want to return this PC to its original installation, with Windows 8.1 I think. There is no F11 option available in the BIOS so I probably wiped that out when I installed Ubuntu. Any help would be greatly appreciated.  I would take this to a Lenovo shop somewhere to get sorted, if that is possible... Thanks,k-rock

Read other answers
RELEVANCY SCORE 58

I just finished installing Debian Linux (Jessie version 8.5) on my Thinkpad T450s and wanted to share my experience so it will benefit others.  Here are the specs for my machine:Thinkpad T450s (20BX001PUS)Intel(R) Core(TM) i5-5200U CPU @ 2.20GHzSamsung K4B8G1646B-MYK0 4GB DDR3 1.35V 1600MHz RAM(I added an additional Crucial 8GB RAM stick)Seagate ST500LM021-1KJ152 500GB 6GB/s 7mm SATA harddriveSanDisk U110 16GB M.2 SATA 22x42mm caching SSDInnolux N140FGE-EA2 TN 1600x900 matte screen(I upgraded this to a InnoLux N140HCE-EAA IPS 1920x1080 matte screen)Intel 7265 Wireless (WiFi and Bluetooth)Realtek RTS5227 PCI Express Card ReaderChicony webcamValidity Sensors VFS5011 fingerprint reader (ID: 138a:0017) The installation went smoothly except that the Intel 7265 Wireless card requires the proprietary firmware-iwlwifi driver, which can be installed from the Debian non-free repository. If you are like me and are using WiFi for your internet connection, then download the firmware-iwlwifi package for Jessie and place it on a USB memory stick. When the Installation Wizard  fails to activate the wireless device for internet access, an error message will appears and ask you if you have the driver. Stick the USB pendrive in the computer and install it. If you don't install it that way, then after finishing the install, you can install it from the Debian repos if you have an internet connection through an ethernet cable:suapt-get install firmware-iwlwifiIf you don't ... Read more

Read other answers
RELEVANCY SCORE 57.2

Hello, I have recently bought a T450s laptop (touchscreen) and text on my screen is blurry. Ive gone threw the cleartype wizard and it has made no difference. my resolution is set to 1920 x 1080. I have a Intel HD Graphics 5500 graphics card running on version 10.18.15.4256. If any help can be given it would be greatly appreciated. The text is decently blurry. Thanks.

A:Lenovo ThinkPad T450s Blurry Text/Not Sharp

Hey Guys, Still Experincing Issues. Any News.

Read other 1 answers
RELEVANCY SCORE 57.2

Hello everyone,I can not install Demon Tools Lite on Thinkpad T450s with windows 7x64.When I install version 1.4.24.0, at the end of it, there is nothing as if something prevented it from doing it.Has anyone ever encountered this problem?

Read other answers
RELEVANCY SCORE 57.2

Hi all, Wondering if there are any others affected with the latest BIOS update? (BIOS version 2.46) Within our company we've had a bunch of Thinkpad T440s and T450s laptops continuosly BSOD, and the only connection I've found so far, which was from checking these forums, is the recent BIOS update. Any thoughts or experience with this would be appreciated.  Cheers, JasonS19

Read other answers
RELEVANCY SCORE 56.8

My T450s notebook makes multiple "PC beep" sounds when I try scroll past the very top, or very bottom, of a webpage in Google Chrome. (Opera does this too.) I think its the Synatpics driver. Running Windows 10 and latest drivers from System Update. Any solutions (other than muting Windows? ) I've already tried: https://www.reddit.com/r/thinkpad/comments/399ht5/t450s_trackpad_issues/csrr72m/?st=j4jdol5u&sh=5776... Here's a clip I filmed: https://youtu.be/B6A3vp4y8bE

Read other answers
RELEVANCY SCORE 56.8

See this companion thread on Dell's forum detailing my unsucessful attempts to use Dell U2415 monitors with my Thinkpad T450s. As of now, the moderator of that site has not been able to identify a solution. I have two of the u2415 monitors, and it seems extremely unlikely both pieces of hardware are defective. Therefore, am assuming this is a problem with the Thinkpad. Any ideas what might be going wrong? When I press F7 it gives me the option to select "extend", etc, but nothing appears on the monitor. Similarly, the monitor realizes something is plugged into its DP port (via the mDP port on the Thinkpad), but it is receiving no picture. So it's close to working, but is not working. Appreciate any help. Anyone else currently using a Thinkpad T450s with a Dell U2415? Barring responses from others with different experiences, I would not recommend buying a Dell U2415 if you hope to connect it to this model of Thinkpad. Though given that the problem appears to be on the Thinkpad's end, I guess I wouldn't recommend buying the Thinkpad if you're averse to these kinds of connectivity issues.

Read other answers
RELEVANCY SCORE 56.8

After a long journey, both batteries in my T450s were flat, and this morning when I plugged in and booted up I got the message that "The battery installed is not supported by this system and will not charge".  True to its word, one of the batteries does not seem to be charging.  These are the original batteries which came with the laptop when bought new from Lenovo.  They have performed well since I received it, no problems to date, and no obvious reduction in performance.  How can I get the battery charging again? Thanks for your help.

Read other answers
RELEVANCY SCORE 56.8

Recently after getting a fresh install of windows 10 on my ThinkPad T450s, I occasionally get BSOD while in the middle of doing various tasks (word processing, web browsing, onenote, etc.). Because of the fresh install, I downloaded many applications so I don't know what's causing the issue. The error code is 0xdead039e, but I couldn't find any information about it online. Any help would be appreciated.

DESKTOP-92VPPHA-Wed_01_20_2016_135015_19.zip

Model: ThinkPad T450s
CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20Ghz
RAM: 8.00 GB
Hard Drive: 500 GB HDD
Graphics: Intel HD Graphics 5500

A:BOSD Error Code 0xdead039e on Lenovo ThinkPad T450s

All 4 dumpfiles are :


Code:
*** WARNING: Unable to verify timestamp for Netwtw02.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw02.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck DEAD039E, {121e0009, 12507ba, 11af0000, 0}
Probably caused by : Netwtw02.sys ( Netwtw02+7f2d5 )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Unknown bugcheck code (dead039e)
Unknown bugcheck description
Arguments:
Arg1: 00000000121e0009
Arg2: 00000000012507ba
Arg3: 0000000011af0000
Arg4: 0000000000000000
Debugging Details:
------------------

CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xDEAD039E
PROCESS_NAME: Sy... Read more

Read other 0 answers
RELEVANCY SCORE 55.6

I have Lenovo ThinkPad T450s 20BW-S2KM with I7-5600 12GB DDR3 512SSD, and i have problem with display flickerng, fast vertical lines shows on display, appear on the screen line in a split second, when desabled Intel 5500 no more then problem but windows and another program not working properly. I tried to change all versions of drivers, reintall windows 10, now I install windows 8.1 but I have same problem.Problems not constant, alternately appear, and disappear, or seem daunting, the computer can be used normally.The computer is still under warranty, what do you propose to do?  

Read other answers
RELEVANCY SCORE 54.4

I have regualrly run a System Update for my computer via Lenovo Companion and I've managed to have all updates successfully completed - all except for one. Lately, I have runs of Updates where I encounter an update for Synaptic UltraNav Driver, run it, but comes up as being unable to download and install - in spite of a successful initial download. Since its encounter a couple of weeks ago, I have been unsuccessful in fully downloading and installing this specific Driver for my computer. Is there any indication of issues for this Drive? And what should I do to resolve it? Also, if the Driver can't be properly updated, what is its purpose for my system? Any form of help concerning this Driver update issue would be appreciated.

Read other answers
RELEVANCY SCORE 51.6

tried to update to windows 10 but get stuck on the hp logo screen after the laptop restarts

Read other answers
RELEVANCY SCORE 50.8

Startup Tab: Set Network Boot to USB HDD but won't boot from USB Bios [ ver JBET62WW (1.26) 9/7/16]No option to change from UEFI only. Boot Mode option is set to Quick (only other option is Diagnostics)What am I missing? Background: the Win 10 1607 upgrade did not install properly. I can boot to desktop but there are issues. Can't roll back so have ISO on USB.

A:T450s Can't Boot From USB

under security, turn off secure boot.  Then change boot tab to "both"

Read other 2 answers
RELEVANCY SCORE 50.8

Same thing happens to me - this program crashes at startup. It however doesn't appear to cause any problems. I got tired of seeing the message at startup so I just uninstalled it. What does this program actually do - does one really need it? Thanks.

Read other answers
RELEVANCY SCORE 50.8

Hello everyone, i need your help....Who has experience with Aspire V3 - 571G. I'm looking for the most stable, realible NVIDIA drivers for Windows 10. The truth is, that i have installed Anniversary update and big problem is there. When i had Windows 7, which was great i didn't have a problem with FPS and now on Windows 10 64-bit(Anniversary Update) i have with drivers 311.30, chipset, Wireless from 572 model, LAN from Windows 7 from my model big FPS drop. I think, that 311.30 for me on Windows 10 is unstable and has no perfomace.  Warframe big lag, etc. Now i tried 372.54 but i don't think so, that is the best idea. Warframe it's again good and normal.  I always downloaded drivers from mainfacturer, because it's a priority, but now..... When Aspire V3 -571G is no longer supported by Windows 10 drivers i need find the best stable, realible, the higgest perfoming , but i don't know what version. 311.30 is problem for me. I have no problem with Windows 10 and drivers.. just in game.  Maybe something missing and for that reason I have low fps.  Who owns this model Aspire V3 -571G and playing games on it. Tell me what version drivers use it! For all suggestions thank you! Good luck.

Read other answers
RELEVANCY SCORE 50.8

I just purchased this from an old friend, so it didn't come with any of the installation CD's. After downloading and installing Windows 10, the computer booted up, but is not stuck in the logo mode.I tried doing a reset by removing the battery and the cable and holding down the power button,l while inserting the cable, and the laptop turned on. Still stuck in logo mode.I ran every test I could, and it passed.Memory test: PassedProcessor test: PassedHard Drive SMART Check: PassedHard Drove Short DST Check: PassedThe only thing that I noticed when I did a cmd scan is that it said that"Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For exampleC:\Windows\Logs\CBS\CBS.log. Note that logging is currently not supported in offline servicing scenarios."That's the only fail that I got. Please help. I'm not sure what else to do. I can't restore to an older update since this was my first time using it after a factory reset.

Read other answers
RELEVANCY SCORE 50.8

So, after updating the BIOS in this laptop it says the update is succesfull and complete and it go to reboot, but after rebooting its not going to Windows. It go to this Boot Menu but I can't choose any option, when I press enter it only blinking once and get back to Boot Menu, I've done trying to boot from my bootable USB but it happens to be not work. Spoiler (Highlight to read)Boot Menu PictureBoot Menu Picture 

A:Lenovo U41-70 Wont Get to Windows After BIOS Updat...

HI.. I have same problem, but finally I can fix it.  follow this link, I have try  and then fix it http://www.hiren.info/pages/bootcd-on-usb-disk you use hiren's boot for fix boot or restore boot menu. Good Luck..

Read other 3 answers
RELEVANCY SCORE 50.8

Hello,

I helped a friend upgrade his work computer from Windows 7 to 8. It mostly all went well except for two problems:

1. It doesn't want to run login scripts for their Windows SBS 2011 server, and
2. It won't recognize any printer we try to install.

I unjoined it from the network, and deleted the computer from the server, so now there shouldn't be any conflict with the server...

The first printer we tried to get to work was an HP P1006, and when we didn't have any luck, we tried a brand new Brother HL2270DW, but we STILL cannot get it to work, even though Brother tech support said it should.

Here's the last thing I tried: I went to devices and printers, click on any printer device, and
then "Printer server properties" at the top...
then go to drivers tab,
then click "Add..." which brings up the Add Printer Driver Wizard,
then click Next, and
then Next again for only x86 drivers,
then click the "Windows Update" button, and
then, after a pause, I select Brother on the left,
then "Brother HL-2270DW Series" on the right,
then click next,
then click Finish, and...

I get an error that says

Driver Installation Error
Windows can't instal the Brother HL-2270DW series kernel-mode print driver. To obtain a driver that is compatible with the version of windows you are running, contact the manufacturer.

Kernel mode driver? Straight from Windows Update? What's up with that?

Any ideas, anyone?

Thanks in advance,

--J

A:Can't install any printer drivers, even from Windows Updat

Do you have a driver disc for the Brother? Its best to install devices using the vendor supplied drivers (either download or disc) than the way you are doing it. If you have a Vista or Win 7 driver it should be Win 8 compatible. However, if you only have an XP driver you can try installing it using the XP compatibility mode.

The same goes for the HP printer.

In most cases when installing devices such as a Printer, you FIRST run the vendor's installer and then only physically connect the device when the install program tells you.

Read other 1 answers
RELEVANCY SCORE 50.8

HP pavilion 15p206-txI can't login to my laptop after win 10 anniversary update. It is not showing the box to enter pin or password. Only the wallpapaper is displayed nothing else. It might be due to some update problem. Please provide solution for this problem.

A:I cant login to my laptop after windows 10 anniversary updat...

@sujithdhyan Logon might just be "hiding". If you have not done so, try tapping anywhere on the Windows 10 logon screen to see User Account logon information. If you have more than one account on the system, these will be listed in the bottom left of the screen. When you see a Post that helps, inspires, provides fresh insight,or teaches you something new, click the Thumbs Up on that Post.Fixed / Answered? Click that post Accept as Solution to help others find Answers.

Read other 1 answers
RELEVANCY SCORE 50.8

Windows XP SP1

I am trying to download an update from Spybot S&D and it goes through the process then it comes up and says !!!bad checksum

I have no clue, can someone help or explain what the problem is??
 

A:Solved: Windows XP SP1-Can't updat Spybot says bad checksum-HELP

Try a different DL site - i just used the roboxen (SP?) USA site and it did just fine
 

Read other 1 answers
RELEVANCY SCORE 50.4

UPDATE: Finally finally managed to change boot order... still refuses to boot from new M.2 unless I use the F12 boot menu.I even excluded the old  one from the boot menu... now it just launches into repair mode. Why will it boot from the new M.2 (which is now the C drive) just fine with the F12, but not just by turning it on?I've installed a new 256 M.2. The system insists on booting off the old 16BG drive (which had Win10 pre-installed), even though I've made the new one the C drive. The old one is now E, and unless I used the F12 boot menu, it always boots from the 16 GB M.2.I migrated Win10, and it will boot fine... if I use the boot menu. BUT... I've changed the 16 GB drive to E:, and the new one to C. Why, why, why does it keep insisting on booting from the now E: drive? I even deleted files off it, now it just gets errors and I have to use the F12 boot menu every time to boot from the C: drive.I've searched for hours... and hours... for a way to change the boot order. But Lenovo seems to have (malevelontly, because they hate me) removed that menu from the BIOS. How the heck do I change this? Please?

Read other answers