Over 1 million tech questions and answers.

Event Viewer will not start - Service not running - Not enough storage space

Q: Event Viewer will not start - Service not running - Not enough storage space

Hello,



I have several Win 7 machines that all have this same issue.




When you try to view the Event Log I get an error saying the service is not running.



The service is set to Automatic. When you try to start it you get the error below.



Windows could not start the Windows Event Log service on Local Computer.

Error 0x80007000e: Not enough storage is available to complete this operation.



I have tried everything I can to fix this and am now out of ideas. Not all Win 7 machines have this issue, but most in our network do.



Any thoughts.

RELEVANCY SCORE 200
Preferred Solution: Event Viewer will not start - Service not running - Not enough storage space

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Event Viewer will not start - Service not running - Not enough storage space

Hi,

According to the error message, there’s no enough storage on your drive.


How much feel space in your C drive? The default event log should be located in C:\Windows\System32\winevt\logs

Please replace these logs to other drive and restart the service to see if the same issue occurs.

Since the issue occur with many machines, the problem may related with the installation image. Did the image make by yourself? How did you deploy these Windows 7
PC? And did the issue appear in a new installed Windows 7 PC?

Furthermore, does your workaround is a domain? Please check if any GPOs were set to those PC.

Hope that helps.



Regards,
Leo
Huang

Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 5 answers
RELEVANCY SCORE 94.8

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

Read other 3 answers
RELEVANCY SCORE 94

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

Read other 19 answers
RELEVANCY SCORE 74.4

The Computer Browser service depends on the Server service which failed to start because of the following error:

can anyone tell me what the two following errors mean in event viewer

Not enough server storage is available to process this command.

The Server service terminated with the following error:
Not enough server storage is available to process this command

it has 2 gb on both drives empty

regards ALAN
 

A:{Resolved} - nt4 ws event viewer errors not enough space?

Read other 6 answers
RELEVANCY SCORE 72.4

We've had multiple computers on our network all having the reported error in event viewer -
EventID: 7023

The SanctuaryExec service terminated with the following error: 
The requested operation is successful. Changes will not be effective until the system is rebooted. 

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

This fault stopped our users from printing. When attempting to print a printer test page the error access denied appeared.

I couldn't find any articles online, does anyone have any ideas?

Read other answers
RELEVANCY SCORE 72.4

We've had multiple computers on our network all having the reported error in event viewer -

EventID: 7023



The SanctuaryExec service terminated with the following error: 
The requested operation is successful. Changes will not be effective until the system is rebooted. 

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.



This fault stopped our users from printing. When attempting to print a printer test page the error access denied appeared.



I couldn't find any articles online, does anyone have any ideas?

Read other answers
RELEVANCY SCORE 72.4

Hello, I have an error in event viewer






Quote:
The WerSvc service was unable to log on as NT AUTHORITY\SYSTEM with the currently configured password due to the following error:
The request is not supported.

To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).


I have googled and I think it might be a malware.
Recently I have viewed a website that is now presented with a warning so Im quite worried. Also, yesterday, my computer's microsoft security essentials was disabled, and I have no idea why.
Full Scan did not reveal anything, so Im using Microsoft safety scanner Microsoft Safety Scanner - Free online tool for PC health and safety
What is this error?

Thanks in advance

A:Event Viewer Error WerSvc service

Scan for viruses with a full scan using the free version (do not start the trial) of Malwarebytes : Free anti-malware, anti-virus and spyware removal download and see the Good and Free system security combination. for better security steps and scanning tools. Make sure you update your security software before running the scan. Post back the results.

Read other 9 answers
RELEVANCY SCORE 72.4

Greetings,

I am just trying to hammer out the issues I find in event viewer. Here is one of them:

Event ID: 3095
This computer is configured as a member of a workgroup, not as a member of a domain. The Netlogon service does not need to run in this configuration.

I am, indeed, a part of a workgroup and NOT a domain. What could the Netlogon service do for me as apart of a workgroup as opposed to a domain?
This took place while I was sitting in front of the computer but I have no idea what would cause this error. Any ideas?

A:Event Viewer - Netlogon service error

It may be configured to start automatically in Services, and can't start and complains. If it is not running and you have no problems, then just keep it from trying to start in the first place.

Go to Start, Run, services.msc and scroll down to the Net Logon service, right click, Properties, set Startup type to manual or disabled, OK.

Read other 1 answers
RELEVANCY SCORE 71.6

hi all,

i always check my boot time from event manager following this pattern:

Event viewer -> Applications and Services log -> Microsoft -> Windows -> Diagnostic Performance -> Operational

off late, i have noticed under Microsoft i get another entry along with Windows. it is IEResp. this was not present earlier.

further under Diagnostic Performance, there was only operational but now there are two more entries i.e Diagnostic and Diagnostic -loopback.

i have observed that my booting time has also gone up.

are these entries valid? why have they turned up? is it ok to keep them or is there any thing i need to do since these entries have turned up.

kindly drop ur views.
thanks,

A:Event Viewer: New Entries Under App. & Service Logs -> Microsoft

pls drop in your views

Read other 6 answers
RELEVANCY SCORE 71.6

Hi all, new to the forum.

I have noticed in my event viewer that I'm getting the following error message associated with iPod Service:

Event Type: Information
Event Source: iPod Service
Event Category: None
Event ID: 0
Date: 5/19/2007
Time: 5:17:58 PM
User: N/A
Computer: DESKTOP
Description:
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
Have not been able to find any information on this. Any help would be appreciated.
 

A:Event Viewer error involving iPod service

Since the event type is "Information" it's really nothing to worry about, unless your iPod doesn't work when you try to sync it.
 

Read other 2 answers
RELEVANCY SCORE 71.6

Hi guys everytime i turn on my pc and look at my Event Viewer log i see Service Control Manager Error does anyone know how to fix this problem? Here are the details :

System

- Provider
[ Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName] Service Control Manager


- EventID 7000
[ Qualifiers] 49152



Version 0


Level 2


Task 0


Opcode 0


Keywords 0x8080000000000000

- TimeCreated
[ SystemTime] 2013-04-18T05:09:19.150702800Z



EventRecordID 89340


Correlation

- Execution
[ ProcessID] 628
[ ThreadID] 840



Channel System


Computer Amir-PC


Security
- EventData

param1 Diagnostic Service Host

param2 %%1069
im using OS Windows 7 Home Premium x64 SP1
CPU Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Motherboard ASUSTeK Computer INC. P8Z68-V GEN3
Memory G.SKILL Sniper Series 8GB DDR3 1866 (PC3 14900)
Graphics Card ASUS GTX660 TI-DC2O-2GD5
Sound Card HT | OMEGA Claro Halo
Monitor(s) Displays ASUS VE247H Black 23.6" 2ms
Screen Resolution 1920 x 1080
its just every time i open my event viewer log i see this error on it can someone explain to me how to fix it thanks

A:Service Control Manager Event Viewer System

Hi can you try the sfc /scannow command and see if it finds anything? SFC /SCANNOW Command - System File Checker

Read other 9 answers
RELEVANCY SCORE 70.4

i keep receiving these errors in EV under application lots of them actually no idea what it is.  i only use Novabackup pro for backups. i am not using Windows 7 for backups. 

here are some examples:
2016-11-20 08:10:45,603] ERROR System.TimeoutException: The open operation did not complete within the allotted timeout of 00:00:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: Open timed
out after 00:00:00 while establishing a transport session to net.tcp://www.mydomain.com:4502/AgentService. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: Connecting to via net.tcp://www.mydomain.com:4502/AgentService
timed out after 00:00:00. Connection attempts were made to 0 of 1 available addresses (). Check the RemoteAddress of your channel and verify that the DNS records for this endpoint correspond to valid IP Addresses. The time allotted to this operation may have
been a portion of a longer timeout.
   at System.ServiceModel.Channels.SocketConnectionInitiator.CreateTimeoutException(Uri uri, TimeSpan timeout, IPAddress[] addresses, Int32 invalidAddressCount, SocketException innerException)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.... Read more

Read other answers
RELEVANCY SCORE 70.4

It started less then a month ago and I can't figure out what is causing the issue. I've looked over Event Viewer, but can't seem to get answers on specifics over the net. I then read about the crash and debug section here and figured I might be able to get a little, or more, understanding about the issue. All help is greatly appreciated!






Quote:
Event Viewer Issues;

12:02:05 The PnkBstrB service entered the stopped state.
EventSourceName="Service Control Manager"
EventID Qualifiers="16384">7036</EventID
Keywords>0x8080000000000000</Keywords
EventRecordID>261885</EventRecordID
Execution ProcessID="476" ThreadID="168"/
Binary>50006E006B00420073007400720042002F0031000000</Binary
12:02:10 The Application Experience service entered the running state.
12:02:15 The DNS Client service entered the running state.

A:Game crashing. Event Viewer says 'Service Control Manager'=ID7036

No DMP's included.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 1 answers
RELEVANCY SCORE 70

1. Every time I boot up the computer, the following error is generated in Event Viewer:
Source: DistributedCom, Event ID: 10010 

The server {F9717507-6651-4EDB-BFF7-AE615179BCCF} did not register with DCOM within the required timeout.

This key pertains to appID WinInetBrokerServer (CLSID WinInetBroker). I tried adding permissions to the key(s) but that didn't solve the problem. In the permissions for the key, the first user name listed is named Account Unknown (S-1-15-2-1).
I think maybe that may have something to do with it. I deleted the 6 registry keys associated with this key and everything worked but I was locked out of Windows XP Mode (Windows Virtual PC). I was wondering if anyone had any suggestions to fix this error?


2. ALSO, exactly once a day I receive the following warning in Event Viewer:
Source: DNS Client Events, Event ID: 1014 

Name resolution for the name imrk.net timed out after none of the configured DNS servers responded.


It would seem that there is an application on my computer that is trying to connect to this site for whatever reason. I have read about ties between this domain and hacking. Someone suggested to enable boot logging in Process Monitor to try to pinpoint the
app but there's so much going on in Process Monitor I'm not really sure where to look. All of the apps that run on a daily basis (including the ones that are set to run at startup) seem relatively safe to me. I've run the gamut of a... Read more

Read other answers
RELEVANCY SCORE 70

I'm seeing my HD light stay on continuously and I'm getting all these errors in Event Viewer
saying "The driver detected a controller error on \Device\Ide\IdePort0." I'm also getting Event viewer saying that:
"Log Name: Application
Source: Microsoft-Windows-Search
Date: 2/7/2007 10:37:59 AM
Event ID: 3032
Task Category: Gatherer
Level: Error
Keywords: Classic
User: N/A
Computer: Desktop
Description:
A document ID cannot be freed.

Context: Windows Application, SystemIndex Catalog

Details:
The content index server cannot update or access information because of a database error. Stop and restart the search service. If the problem persists, reset and recrawl the content index. In some cases it may be necessary to delete and recreate the content index. (0x8004117f)

Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Search" Guid="{CA4E628D-8567-4896-AB6B-835B221F373F}" EventSourceName="Windows Search Service" />
<EventID Qualifiers="49152">3032</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2007-02-07T15:37:59.000Z" />
<EventRecordID>2129</EventRecordID>
<Correlation />
<Execution ProcessID="0" T... Read more

A:Error's in event viewer and HD won't stop running

Read other 9 answers
RELEVANCY SCORE 69.6

TL;DR: I got a scam call from Dell's "concierge" number (1-877-790-3355). The caller had several pieces of personal information, including my name and service tag, and details of my recent system servicing. He said Dell had been notified that my computer was downloading malware, and got me to open the Windows Event Viewer, showing me the errors in my administrative events folder. He told me to delete these, which was when my suspicion finally got the better of me and I hung up. He called back, first on the same number, then on another one that appeared on caller ID as "Global Pacemind" (Everett, WA, USA - 1-425-609-3257). I told him that I didn't have time right now (I wasn't yet 100% sure this was a scam, but didn't like where it was going), and he said that he'd call back.

Detailed version:
After my laptop was returned from repair at Dell's depot (system board replacement), I received a call from Dell's "concierge" phone number, 1-877-790-3355. The caller knew my name, and said he was calling about my computer. He quoted my service number and the date I had called Dell's technical support line.
He said that the company had received a notification from my computer that I'd used their code to activate Windows 10 (which I had - my operating system was reset to the factory-default Windows 8 during the system board replacement, and I was beginning the process of restoring my system). Because he had access to so m... Read more

A:Windows Event Viewer Scam - Dell phone number, knew my service tag

Hi keegansmith,Thanks for posting.Thank you for bringing this to our attention. Protection of your data is a top priority for Dell. Unfortunately, technology phone scams have become prevalent across our industry. We’d love for you to take a moment to help us stop cybercriminals by reporting details about your interaction. Would you please complete this form www.dell.com/reportphonescams? This will allow us to investigate further.

Read other 3 answers
RELEVANCY SCORE 69.6

Have found the following error in the Event Viewer relating to VSS, ID 8194 when made back up the system Windows 8.1 partition to an image file with OneKey recovery Lenovo program :
Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied.
This is often caused by incorrect security settings in either the writer or requestor process.
Operation:
Gathering Writer Data
Context:
Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Name: System Writer
Writer Instance ID:{7382df8f-c426-4940-a8bf-24d4ee707cf3}
I would appreciate some advices how to fix it.
Thanks and best regards,
Ewa

Read other answers
RELEVANCY SCORE 68.8

Hi
I hope that I have put this in the correct forum ????, never had this before, each time after start up or restart when I open event viewer I get the message "add snap on console" then event viewer opens.

Is there a problem or can I do something so that event viewer open without message.

Win7/32 bit Toshiba laptop

Thanks in advance

Tony Miller

A:MMC message at start of event viewer

I fixed by reboot of computer

Read other 1 answers
RELEVANCY SCORE 67.2

I installed a free event viewer app and noticed that I sometimes get this error which is pointing to the search service - it IS disabled and thats why it probably fails, but what I cant work out is why its even trying to launch the service?

I went to uninstall Windows Desktop Search 4.0 and it said that it may have already been uninstalled and removed it from add&remove programs

I use XP SP3 32-Bit

I think its happening when I boot the computer, ive checked services and startup using Autoruns & HJT and theres nothing to say that Windows Search or anything using it is running at boot, ive ran MalwareBytes and SAS and gotten clean results..

if anyone could help with this it would be great - its not causing any problems, im just curious as to whats causing it too run?

thanks

Type : Error
Date : 24/09/2012
Time : 22:51:19
Event : 10005
Source : DCOM
Category : None
User : MOTHER\Paul
Computer : MOTHER
Description:
DCOM got error "%1058" attempting to start the service WSearch with arguments ""
in order to run the server:
{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}
 

Read other answers
RELEVANCY SCORE 67.2

Hi, *trying* to fix my dad's laptop. He's been receiving BSODs the past couple of days, but I haven't been able to get the crash code, I'll try to add it later. I've attached the .zip with the crashlogs/system data.

Before the BSOD, he gets some errors in the event viewer, where:

The [EXAMPLE] service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

He gets about 10 errors over about 10, maybe 15 minutes.
The BSODs started on the 11/08/16. No new hardware has been installed, nor software.

Specs:
Dell Inspiron 5547
Intel Core i7 4510U
Windows 10 Home
8GB RAM
AMD Radeon R7 M265
Intel HD Graphics

Help appreciated! :)
DELL-INSPIRON-16_08_2016_103324_38.zip

Read other answers
RELEVANCY SCORE 66.4

I'm having some issues with my computer and I'm not sure what caused it. I trying to open WordPad and I got a Microsoft Visual C++ runtime error that this application has requested the Runtime to terminate it in an unusual way. So I try to check the error in Event Viewer and I get the same error. I tried to go into Services, Computer Management, Device Manager, and I get the same error. There's no error codes or anything else that appears to pinpoint the error. No problems when in Safe Mode. Any ideas on how I can get this fixed without having to reinstall Windows 7? I have Windows 7 64-bit home edition.

A:Microsoft Visual C++ runtime error when trying to start Event Viewer

Welcome to our forum ledgema.

The first thing I would try is sfc /scannow to check Windows 7 system files.
Here is a tutorial by Brink to guide you.
Please post the results.

SFC /SCANNOW Command - System File Checker

Read other 4 answers
RELEVANCY SCORE 66.4

My goal is to start Windows Event Viewer from a command line, with the Application node already selected, showing only entries for my specific application, or provider? In other words, I need to filter it by the Source column for the "Application X" using command line call:



So far I could figure out that I need to do this to show Application node:


Code:
eventvwr /c:Application
but I can't figure out how to specify provider in the /f: parameter, and the example given if I run "eventvwr /?" does not help much.

Any idea how to do it?

Read other answers
RELEVANCY SCORE 66.4

Keywords: Classic
SstpSvc fails to start; Starts then stops; 

Solution: Under Device Manager: Network Adapters: Enable Wan Miniport SSTP

Read other answers
RELEVANCY SCORE 66

I created a Storage pool with the following setup. Three 3TB drives with parity all in an external enclosure with eSata and USB 2/3 ports. It was connected via USB when created and had production data loaded and tested without any issues.
After a few days of use I decided to see what happened when I tried to access it via the eSata port. No luck, due to a driver on the eSata card issue with Win 8. So I powered all back down and plugged back in via USB. At this point the Storage pool went
into the state as per the screenshot below. Any suggestions to either fix the issue and/or retrieve the data that is in the volume?

Read other answers
RELEVANCY SCORE 66

I've recently installed Windows 7 on a new pc and am having 2 distinct issues.

The first is that I have found that I am unable to make many programs start with Windows. Avast will, as will AI Roboform and Open Office but other simply refuse to do so. My firewall (Look n Stop) for example has the option "Start with Windows". Checking the box has no effect, the program fails to start with Windows. This issue is repeated with a number of other programs e.g. Speedfan, Peerblock

In addition adding the programs to the Startup folder has variable success. The firewall for example does load on startup when added to the startup folder but neither Speedfan or Peerblock do.

The second problem is that I am registering the error "The following boot-start or system-start driver(s) failed to load: EIO_XP" in the Administrative Events section of Event Viewer.

I've searched everywhere and have been unable to find a copy of this driver. It appears to be associated with the ASUS Smartdoctor utility which I do not have. I did download and install it to see if that corrected the problem but it did not and I have since uninstalled it.

I am running Win 7 (64bit).

Any suggestions much appreciated.
 

A:2 issues: Programs fail to start with Windows, error in Event Viewer log

Are the programs with which you are having problems compatible with Windows 7 64-bit?
 

Read other 2 answers
RELEVANCY SCORE 65.2

Hello there!

Just to let you know the context: I have recovered from a severe malware (Trojan.Vundo) infestation with the kind help of
SifuMike from this very forum.
Before I decided to turn myself towards a helping hand, I had to tackle with the infestation myself and namely had to dapple with/into services.msc and msconfig to disable some programs that would load at startup. This in order to try to prevent further spread of the infestation.

Though the infestation is gone my PC running under Windows XP Professional SP2 still has some malfunctions
- one of the most troubling facts is that if I put on the password protected screensaver, when it resumes to fast switching user welcome page, the password I type in to log in does not work... Note that I run an administrator account. I need to shut down and restart the computer to be able to log in...

- When I try to install/uninstall software, I have to start manually the Windows Installer Service and nonetheless receive he following error message "the RPC server is unavailable" although the Remote Procedure Call (RPC) service is started...

- in the System section of the Event Viewer, I can see numerous errors pointing to services that fail to start: e.g. and to name a few, Remote Access Connection Manager, Application Layer Gateway Service, Workstation service, Computer browser service, Routing and Remote Access, SSDPSRV service, SSDP Discovery Service, etc.

- ditto in the Application section of the Event Vie... Read more

A:System And Applications Failures (unable To Initialize) In The Event Viewer - Services Will Not Start

Hello,It sounds like that the system has been through a lot. Download advanced windows care, the free version http://www.iobit.com/advancedwindowscareper.html this should solve quite a few of the problems and provide a solid foundation to diagnose further problems.In services.msc you mention that the dependencies list are greyed out, how long have you left the list to populate? the list takes anything from a few seconds to a minute to usually load. open the dependencies tab of installer and leave it for a while.Let us know how it goes.

Read other 16 answers
RELEVANCY SCORE 64.8

My dual boot (XP32/64) machine will not start the event logger service on the
x64 operating system, and I cannot start it; it works fine on the 32 bit OS.

In Component Services, clicking the START button for Event Log generates the
error message "Could not start the Event Log service on Local Computer. Error
2: The system cannot find the file specified."

Drilling down through My Computer to the Error Reporting window shows error
reporting as enabled, and both Windows and Programs checked.

Deleting the existing log files had no impact on the problem.

Trying to read the logs via the Event Viewer generates the error message
"Unable to complete the operation on 'Application'. The interface is
unknown." In the Event Viewer on the right pane, it says "There are no items
to show in this view". This is true for all the logs.

The windows\system32\config folder has full access rights for both Adminstrator and System.

A full Repair install of the system did not fix anything.

Any suggestions?

A:Event Logger service not running in XP

Worth a look, http://www.annoyances.org/exec/forum/winxp/t1078935546Louis

Read other 3 answers
RELEVANCY SCORE 64.8

since about 3 months ago, my computer has been experiencing multiple BSOD's per day. upon looking in the event viewer, ever single time and event with something to do with a "VSS service" is the last thing before the crash. i find this strange, as looking into this, vss is a backup program for xp and server 2000. i have no idea why this is on my system, what it does, or why i need it. after trying to use some debugging tools, it seems that i cannot access the .dmp files on my own computer, logged in as an administrator, with full privileges, with all file security options in my anti-virus off. my system is a x32 vista business. the crahses occur almost at random, doing anything from playing a game, using Firefox, typing a notepad file, or just leaving the thing on and not doing anything for more than 10 minutes. the system will still crash at the log in screen, leaving me to believe that this is not an overheating issue. i have tried to disable all programs with mscofig, but i still get a crash. i have even had crashes in sleep mode, as well as in the process of a normal shutdown. i have no new updates in windows update, and have installed all of the new drivers for every device i can find them for. any and all help would greatly be appreciated.
 

A:frequent BSODs with event viewer pointing towards "VSS service"

Hi this is about vss and what you can do with it http://www.mydigitallife.info/2007/...tem-restore-disk-space-limit-in-explorer-gui/
 

Read other 2 answers
RELEVANCY SCORE 63.6
A:Event Log Service Won't Start

It may be worth having a look at a fix mentioned here

Read other 5 answers
RELEVANCY SCORE 63.6

Hi Everyone,
 
I am trying to fix up my parents computer that is running Vista Home Premium but I can't get the Event Log Service to start, and as a result, Task Scheduler won't start either, nor will any of the services that require Task Scheduler in order to work, like defrag. Not sure if it is what is causing System Restore to not work as well but it isn't working either.
 
System Restore appeared to be working as programs like Revo can make restore points, but I cannot make one manually and of course, it doesn't make the scheduled restore points due to Task Scheduler not working. I did not notice that I couldn't make restore points in System Restore until after I ran the Windows Repair from Tweaking.com.
 
The Windows Repair program caused some problems so I went to use System Restore only to find that Windows Repair program had deleted all of them, even the one I told the Windows Repair to create wasn't there. That program also caused some other problems but thankfully the registry backup I had it make was there which helped me resolve the problems it created. It was then that I tried to make a restore point and found I could not do it.
 
In any case, I am left with my original problem of the Event Log Service not starting which I need to have running in order to have the Task Scheduler work. Both are set to automatic in services but neither will start. When I try to start the Event Log Service, I get a Error 1747: The authentication service is unknow... Read more

Read other answers
RELEVANCY SCORE 63.6

Removable Storage
Service
System Error None
2009-02-15
10:15:27
It is a usb drive on which I have my portable office. I keep it plugged to keep my browsers, email client and security apps updated. I didn't have this problem last year.

That is the error that occurs sometimes. I have not found a reason for it. Most of the time a reboot fixes it. The system freezes and I have the eternal hourglass and I wait and wait. I get up make coffee and wait more. Finally I do a hard boot. What could be the reason for it. Some conflict of programs I have. I reinstall my OS each new year. This is the first year that I have had the error.

A:Removable Storage Service doesn't start sometimes

Look in Device Manager for yellow exclamation points by the USB hub controllers. You will probably have to delete them and reboot the computer to let Windows re-detect them

Read other 2 answers
RELEVANCY SCORE 62.8

Every time I Restart the Laptop, it opens to the Desktop, but there is a period of sometimes upwards of a minute, where once everything is loaded, the Desktop freezes.

Today in Windows Task Manager - Services Tab, I see that WdiServicesHost is not running. When I right click on the line, this is what appears;

....but then when I click on Start Service, I get this nasty little message;

So where to now to beat this problem?

A:Wdi Service Host not running - in trying Start Service : Access is Denied

Hello,

Looking at my computer, for me it is stopped, and when I try to start it, I get the same error message. My computer is working fine, so I think this is not your original problem. However, some websites suggest that it should be started. I am slightly sceptical as to the accuracy of this information, but here is the link to this file on my favourite website for looking these things up: Diagnostic Service Host - Process and Service wiki

Richard

Read other 1 answers
RELEVANCY SCORE 62.4

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

A:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

Read other 1 answers
RELEVANCY SCORE 62.4

Hello Everybody,
We have a requirement in our project to audit all security relevant events on the system, including the start/stop of auditing functions. The problem is that windows is not registering the start of event log service when you manually stop/start the service.
There only an audit event on the system log, but linked to the system startup and not under security category when you do the start/stop manually. Is this a windows bug or a matter of configuration?
Best regards,
Alejandro.

Read other answers
RELEVANCY SCORE 62.4

Hi All,
I'm having a problem with my wireless networking on XP whereby no wireless networks can be found. Basically it says "one or more wireless networks are in range", but when i click the bubble it shows no networks at all, even when i refresh. Normally it shows my home network (access point about 15 metres away) along with around 3-5 other networks from various neighbours. The issue is on the desktop PC not the access point as the laptop i'm typing this from is connecting fine.

After spending many hours trying everything I can find on forums related to this issue and ruling out solutions one by one, i've narrowed it down to a probable specific issue with something called the "event Log Service". From browsing forums I think fixing this issue will fix my problem - either way it's definately giving an error message that sounds not nice.

Under Computer Management - Services. The Event Log is set to Automatic, but is not running. I try to start it, it gives the following error:
"Could not start the Event Log Service on Local Computer. Error 126: The specified module cannot be found". A similar error occurs with something called "Task Scheduler" in the same place - except this time the second part is "Error 1717: The interface is unknown".

Does anyone have any ideas re how to reinstall these components or otherwise fix this computer? I do not want to have to reinstall windows etc. As I mentioned tried... Read more

A:Solved: Event log service will not start - error 126

Read other 6 answers
RELEVANCY SCORE 62

Here what I want :

if servicename is running, do nothing.
if servicename is not running, then start servicename, then record the date and time.
based on my search [COLOR=blue ! important][COLOR=blue ! important]online[/COLOR][/COLOR], here is what I have so far:
net start | find "servicename" > nul 2>&1
if not .%errorlevel%.==.0. goto startservice
:startservice
net start "servicename"
echo service restarts @ %date% %time% >> C:\checklog.txt

pause


My problem is:
It looks like that the If statement is not working. Every time I run this batch file, it runs through all the command lines.
and I got a error message said the service is already running.
Please advice.

A:Batch file to start a service if the service is not running

Why not just start it. If it's already running, nothing will happen. For instance, if I try to start BITS and it's already running, this is what I get:

net start "Background Intelligent Transfer Service"
The requested service has already been started.

More help is available by typing NET HELPMSG 2182.

If I run this from a batch file:

net start "Background Intelligent Transfer Service"
echo %errorlevel%

I get:

net start "Background Intelligent Transfer Service"
The requested service has already been started.

More help is available by typing NET HELPMSG 2182.

C:\Users\rrkurtz>echo 2
2

So if %errorlevel% == 2 then it's already running. So the batch file could look like this:

net start "Background Intelligent Transfer Service"

FOR /F "TOKENS=1* DELIMS= " %%A IN ('DATE/T') DO SET CDATE=%%B
FOR /F "TOKENS=1,2 eol=/ DELIMS=/ " %%A IN ('DATE/T') DO SET mm=%%B
FOR /F "TOKENS=1,2 DELIMS=/ eol=/" %%A IN ('echo %CDATE%') DO SET dd=%%B
FOR /F "TOKENS=2,3 DELIMS=/ " %%A IN ('echo %CDATE%') DO SET yyyy=%%B
SET date=%mm%%dd%%yyyy%
Rem ERRORLEVEL 1 checks all levels > 0
if ERRORLEVEL 1 echo "Started BITS" %date% > logfile.txt

Read other 6 answers
RELEVANCY SCORE 61.6

Has anyone seen this error. MS has a wonderful description, "an internal error has occurred". We rebooted this server on Friday and it worked until this morning (Monday) and is back to reporting failure to find the counters in remote Perfmon. The Performance Logs and Alerts service is set to manual and when I attempt to start it, I get the error and the event log is Event 2003 (0x7D23).

This is a production server that cannot just be rebooted regularly.

TIA for any help!
 

Read other answers
RELEVANCY SCORE 61.6

Okay, I am a pretty technical user, and I am really struggling with this issue, and I wasn't 100% sure which section to post this in. I used to share videos over my network with multiple xboxs and a ps3. I recently installed Norton Internet Security on my system, and after doing so, I was not able to stream videos anymore. I tried changing firewall settings, and permissions and such, but could not get it to work, so I uninstalled NIS from my system. After doing so, the Windows 7 firewall service will not start. If i look at the event log, it gives me Event ID 7024 : The Windows Firewall service terminated with service-specific error Access is denied.. I have run the norton removal tool, and this has not fixed the problem.

A:Windows 7 firewall service will not start. Event ID 7024

I solved the problem! I followed the instructions here.
Windows Firewall damaged by &#39;Windows 7 antivirus 2012&#39;

Sorry to bother you guys.

Read other 1 answers
RELEVANCY SCORE 61.6

Windows 7 64-bit SP15

My Dell Latitude e6420 is having problems as of the past week. An error comes up on every reboot or startup of my machine. The "Failed to Start System Event Notification Service" error would come up on my screen down in the taskbar. Details below of startup:Laptop comes up slow.
Login and once desktop shows that error appears on my screen and sometimes my audio service isn't working (but it can't be the the driver for my video/audio card because sometimes it works and other things will crash meaning a corruption of some system driver.)
Takes 5-10 minutes for machine to fully boot.
Look at event log and shows Event ID Error 7026 every reboot.
I cannot find a fix for this error and nothing seems to be working. Please help with any information. Thanks.

A:Failed to Start System Event Notification Service

Windows Server 2008: Event ID 7026 this article just says what you are thinking seems to be correct. have you looked in device manager to see if there are any warning signs in there?
when your in event viewer, isn't there a link with the error that gives some help?

Read other 1 answers
RELEVANCY SCORE 61.2

I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.

I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Re: LoadPerf 3011, 3012
Hi-
I had the same problem with LoadPerf and here is what I found out:
All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).

The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.

User Action
To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
The contents of the string tables are automatically rebuilt.

I hope this helps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.

Here are the screenshoots of my two errors.

A:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

Rebuilding the string tables as outlined in my first post fixed the problem.

Read other 1 answers
RELEVANCY SCORE 61.2

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

A:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 7 answers
RELEVANCY SCORE 61.2

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

Read other answers
RELEVANCY SCORE 61.2

Hi,

I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

... Read more

A:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

Read other 2 answers
RELEVANCY SCORE 61.2

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

A:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

Read other 4 answers
RELEVANCY SCORE 61.2

when I run reboot stress test at Intel platform with win10 Desktop RS1 version, after some cylces test, XHCI controller show yellow bang. Event viewer showed that event id is 14.  I want to know the indication of
StartDeviceFailReason equals 3. I cannot find more info about this failure from website.Thanks a lot!









-

Provider











[
Name]
Microsoft-Windows-USB-USBXHCI










[
Guid]
{30E1D284-5D88-459C-83FD-6345B39B19EC}




















EventID
14



















Version
0



















Level
2



















Task
0



















Opcode
0



















Keywords
0x8000400000000000

















-

TimeCreated











[
SystemTime]
2016-11-25T19:48:29.908393500Z




















EventRecordID
7099


















Correlation

















-

Execution











[
ProcessID]
4










[
ThreadID]
232




















Channel
System



















Computer
LAPTOP-QQEHB4HS

















-

Security











[
UserID]
S-1-5-18












-

EventData










fid_UcxController
0x187f9ddd64a8







... Read more

Read other answers
RELEVANCY SCORE 60.8

System event not recording anything. It is empty, says "date is invalid(13)".

I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

hp pavilion dv9000
OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
SMBIOS Version 2.4
Installed Physical Memory (RAM) 2.00 GB
Adapter Type GeForce 8400M GS, NVIDIA compatible
Adapter Description NVIDIA GeForce 8400M GS
Adapter RAM 128.00 MB (134,217,728 bytes)
 

A:Solved: Vista, Event Viewer - system event log not recording

Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
 

Read other 2 answers