Over 1 million tech questions and answers.

Asus k601 stuck on American megatrends screen

Q: Asus k601 stuck on American megatrends screen

can't go any further no keys work what does this mean

RELEVANCY SCORE 200
Preferred Solution: Asus k601 stuck on American megatrends screen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Asus k601 stuck on American megatrends screen

As the date in wrong, the CMOS battery is likely dead.

You can press F2 to run setup, save, and exit and the PC should boot. But you will likely get this screen every time until the battery is replaced.

Read other 1 answers
RELEVANCY SCORE 189.6

View attachment 252847
can't go any further no keys work what does this mean
 

A:Asus k601 stuck on American megatrends screen

For now press F2 and set the date and time in the Bios setup, save and exit. It should boot to Windows after that.

Is it a laptop or desktop ?
 

Read other 1 answers
RELEVANCY SCORE 103.2

Suddenly today my computer is stuck on American Megatrends start page. it says CMOS Settings Wrong. No keys seem to work
 

A:Computer stuck on American Megatrends pg

hiya,on startup tap Del or F1 to enter bios(could be a different key for your pc,check your manual)once in find the line "load defaults" save and exit,the cmos battery may want replacing also.
 

Read other 1 answers
RELEVANCY SCORE 95.6

Hi

After turning on my pc this morning I got the usual beep and then the packard bell screen, then, a second or two later another beep and the American megatrends screen. The screen only shows for about two seconds and then the pc boots normally into windows. Is this something to worry about? i think two beeps means a memory error. The only hardware i have install was a cordless mouse yesterday. Using windows vista SP1 on Packard bell istart 2314. Thanks please reply.

A:American megatrends screen at pc startup

hi if you go here http://www.micro2000.co.uk/products/...e-download.htm you can test your memory using the disc you make

Read other 1 answers
RELEVANCY SCORE 95.6

Hello, experts!
For the past few weeks, I've been seeing the AMI screen everytime I turn on my computer. It wasn't like that before, so I have no clue why it's showing up now. I pressed f1 and f2 numerous times and went through every session, still I cannot find the problem of why it keeps appearing during startup.

Since I just received a new computer this April, I'm not very familiar with the new AMI then I was with Windows XP. Instead, I used screen-shot to show my AMI screen. I hope this will help!


 

A:[Startup] American Megatrends Screen

Read other 6 answers
RELEVANCY SCORE 95.6

Siemens/Fujitsu PC with Win xp SP3

The American Megatrends screen has recently appeared at boot up but boots past so quickly I cannot get to read it. I think I glimpsed something like "BIOS not configured properly" at bottom of screen but am not really sure. How do I pause the boot in order to read the AMI screen? Pause/break button does not do it.

Any help appreciated
 

A:Solved: American Megatrends screen

Read other 8 answers
RELEVANCY SCORE 95.6

Hi Experts,

Thanks to all for your advice. I have a computer that I truly enjoy!

I want to see if I can make one more tweak!! I searched all the forums and there was not an answer.
I have a Gateway 4620D desktop. Is there any way I can bypass the American Megatrends F1 boot screen on start up? I get the Gateway welcome screen, then the Amer Meg screen comes up and I have to press F1 to boot to XP. Can I bypass it?

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 2015 Mb
Graphics Card: ATI Radeon HD 4550, 1024 Mb
Hard Drives: C: Total - 381543 MB, Free - 286877 MB;
Motherboard: ECS, Q35T-GB(vPro)
Antivirus: Avira Desktop, Updated: Yes, On-Demand Scanner: Enabled

This is what it says on the American Megatrends screen,
American Megatrends,Inc.

AMIBIOS(C)2007 American Megatrends, Inc.
Q35T-GB V2.2 11\02\2007
EM64T CPU: Intel(R) Core(TM) 2 DuoCPU E6550 @ 2.33GHz

Press F2 to run Setup (F2 on remote keyboard)
Press F10 for BBS POPUP (F10 on remote keyboard)
Press F12 if you want to boot from the Network.
The MCH is operating with DDR2 800/CL6/Tras18/Trp6/Trcd6
Dual Channel Mode
Press F1 to continue boot

Any help??
 

A:American Megatrends Start up screen

You were receiving help in your other thread so there was no need to start a new one. You should reply there:

http://forums.techguy.org/windows-xp/1043997-press-f1-continue-boot.html

Closing duplicate.
 

Read other 1 answers
RELEVANCY SCORE 94.4

what should i do if i see this the mch operating with ddr2 800/CL6Tras18/Trp6/Trcd6 message
I powered off my computer without shutting down properly please help.
 

Read other answers
RELEVANCY SCORE 83.2

i have an american megatrends windows xp
running AMD Athlon something
I was wondering how i caould do a sytem recovery without a cd?
It starts and after a few second it would shut off i get some serror messages ill post them up in a little bit

A:American Megatrends

Quote:





Originally Posted by monkey09


i have an american megatrends windows xp
running AMD Athlon something
I was wondering how i caould do a sytem recovery without a cd?
It starts and after a few second it would shut off i get some serror messages ill post them up in a little bit




what do you mean american megatrends xp?

thanks
Wolf~

Read other 8 answers
RELEVANCY SCORE 83.2

So I have been having this problem after a long period of not playing on my computer. What should I do?
 

Read other answers
RELEVANCY SCORE 83.2

My computer will not get past this screen. I have done numorus setups, F1 to resume,but nothing happens. Can you help?
 

A:American Megatrends

Your computer seems to be failing at the POST (Power On Self Test). Your motherboard may be defective. I have requested this to go to the Hardware forum for more assistance.
 

Read other 2 answers
RELEVANCY SCORE 83.2

When I start my computer up. I see the following message:

ASUS SABERTOOTH 277 ACPI BIO Revision 1504
CPU: Intel (R) Core(TM) 17-3770K CPU @ 3.50GHz
USB Device total: 0 Drive, 1 keyboard, 1 mouse, Hubs
Detected ATA/ATAPI Devices...
SATA Port: Optiarc DVD RW AD-7200S
Port 6: ST3500630AS
S.M.A.R.T Status Bad, Backup or Replace
Press F1 to Run Setup

What does this mean?
 

A:American Megatrends

This means that the hard drive is about to fail. S.M.A.R.T is a utility that monitors the health of the hard drive and reports any potential problems, like an early warning system. When it says "S.M.A.R.T Status Bad" This is not a good thing. Does it give you an option to bypass and get to Windows? If so backup your important data.
 

Read other 1 answers
RELEVANCY SCORE 83.2

im 2 sad


i have a problem with my pc its a windows xp .. its a toshiba and when i run it its shows bios screen .. its seems to me that the problem from the time .. so i faxed it by entering the right time ..then i press f10 and yes .. then its shows again two options run windows by safe mode or normaly .. either ways is reboot when i choose one .. then another problem came up ..

American Megatrends

its says like this

press f2 to run setup
press f12 for bss popup
the mch is operating with ddr2-533/cl4 in single channel mode
initializing usb controllers .. done .
1024mb

auto-detecting pri master .. ide hard disk
auto-detecting 3rd master ..aiapi CDROM
pri master:TOSHIBA MK1646GSX LB113M
ULTRA DMA Mode-5 , S.M.A.R.T. Capable and Status OK
3RD Master: PIONEER DVD-RW DVR-K17A 3.52
Ultra Dma Mode-2
Auto-detecting Usb Mass Storage Devies ..
00 Usb mass storahe devices found and configuerd .

CMOS DatelTime Not Set

press F2 to run SETUP
press F1 to load default values and continue
-----------------------------------

can anyone help?

any clue any thing .. gust Help

Soul :$

 

A:American Megatrends .. Help ..)=

Read other 6 answers
RELEVANCY SCORE 82

On start up my pc gets stuck on American Megatrends screen. It has been doing this for a while and to tackle it I would press f1 then f8 and then press enter on the first harddrive that appears. Now however my keyboard and mouse won't connect. Help would be much appreciated. If any other information is required I will try and help. Thanks.
 

Read other answers
RELEVANCY SCORE 81.2

This morning I went to turn my computer on and got the message below. It's saying something about the USB devices, but I don't have any devices plugged in to the computer. I know that one of my USB ports is damaged and has been for awhile. Could this be causing it? If so, how would I remove it? Do I have to take the computer apart? Is it something I can do on my own? I am not very computer literate.
 

A:American Megatrends message on startup

Hi, as you say it is likely to be a damaged USB port.
Some suggestions here.
http://www.whoho.com/2011/03/usb-device-over-current-status-detected.html
 

Read other 2 answers
RELEVANCY SCORE 81.2

Hi I have windows 7 on my pc. When I start up my pc it shows this weird message. I know it's not a virus cause I have a very good antivirus on. It says the following: American Megatrends - Usb Device Over Current Status Detected !!!
Sata port 5 : ST2000DL003-9VT166
S.M.A.R.T Status Bad , Backup and Replace
System wil shut down in 15 seconds!!!

 

A:American Megatrends message unknown

OK, you are running the system overclocked. Not too much however it shows both ram and cpu running faster than normal. It is probably the board failing however the very first thing I would do would be to return ALL settings to stock. Clear RTC [cmos] to return settings to stock. Once you clean RTC, pull the pw connectors from ALL drives; both hd and optical. Now disconnect any usb device ie printer, scanner, external drive, etc.

Pw ON and see if the board will successfully complete POST.

Remember there is NO safe overclock. All overclocking entails some degree of risk.
 

Read other 1 answers
RELEVANCY SCORE 81.2

Need to know will the HP 110-220z American Megatrends BIOS support booting from an Ubuntu Live DVD ISO  on a usb thumb drive with a boot sector I need to fix a Ubuntu 16.04 load sectors corruption problem.  the cd/dvd drive has diedbeen through all the disable security and finally got the USB thumb drive listed in the memory list.  The version of the BIOS is 2.15.126 I have not been able to find any specs on what it can and cannot do. Now I have lost Ubuntu Grub loader and the machine starts loading win7 each time. It has not been used for over 2 years and Microsoft will demand two days of updates be loaded before I can access any drive from it. I need the live CD Ubuntu to load from the thumb drive so I can fix grub and use utilities to fix the inability to read certian sectors. [Have run HP diagnostics on the Hard disk, no problems found.]

A:Need to know will the HP 110-220z American Megatrends BIOS s...

The support page for that model indicates it came with Windows 8.1, which means it should also have UEFI BIOS.  Depending on the way the Ubuntu Live was added to the flash drive, it might not be done correctly.  See this page on Ubuntu and UEFI BIOS.  BTW: it needs to be a 64bit installhttps://help.ubuntu.com/community/UEFI

Read other 1 answers
RELEVANCY SCORE 81.2

I don't know why but yesterday, after restarting my computer it beeped once then went to the AMI screen. Plus my computer has become very slow it might have something to do with it. I am asked to press f1 or f2 and if I press f1 I go to this configuration screen and I don't know what to do. But I do see that the word BIOS is written everywhere on the screen. It dose that every time I turn it on. I haven't had any big problems except my computer is running kinda slow. How do I get rid of the message?
 

A:American Megatrends Message at Startup

Read other 10 answers
RELEVANCY SCORE 81.2

Specs first:

e6700 3.2 GHZ.
4GB Patriot extreme ram (4 x 1GB) @ 800MHz and 4 - 4 - 4 - 12 T2 (T1 causes BSOD ).
XFX 8800 GTS
Asus P5N32 SLI SE Deluxe w/ ver 5## BIOS (Possibly a custom one from the OEM).

My computer is working fine, excpet for one minor detail...

My Asus P5N32 SLI SE Deluxe doesn't like my new 4GB of 800MHz ram. The ram is fine. XP 32 bit runs fine with only 2-3 GB in use, but Vista Ultimate 64-Bit is terrible, running at least 5 times slower and maxing out the processor and freezing a couple of minutes just to open Fire Fox. I am considering buying a new mobo, but I heard there is another way.

Some people have gone into their BIOS and enabled an option called "Memory Remapping," which fixed the problem. The catch is: My BIOS doesn't have that option for some odd reason... Surprise, surprise after my cellphone provider had to send 2 SIM cards to me for the phone to work and my External Backup HD had failed just a couple of months after I bought it(Goodbye 100+ Gigabytes of data).

I checked the manual that went with my mobo, and the bios version in the manual and on my computer were EXACTLY the same! Though, the menu in the Manual had many more options than did the one on my computer. So, I go to Asus's website and download the latest official (not beta) driver. Then, I pop in the Asus CD that came with my mobo and tried to run "Asus Update". Every time I run this I get an error message: "Unable to create NT driver... Read more

A:How do I flash my American Megatrends BIOS? I've tried everything!

Argh, not even a boot cd did the trick! The DOS files loaded onto the cd and the cd ran just like a floppy disk, but the BIOS files were nowhere to be found! WTF, did I use nero wrong?
 

Read other 1 answers
RELEVANCY SCORE 81.2

i cant figure out this thing for the life of me but here is the specs of my computer:
Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) No details available
Processor a Main Circuit Board b
233 megahertz Cyrix MII BIOS: American Megatrends 062600 07/15/95
Drives Memory Modules c,d
61.46 Gigabytes Usable Hard Drive Capacity
56.15 Gigabytes Hard Drive Free Space

CDWRITER IDE5232 [CD-ROM drive]
MITSUMI CD-ROM FX400E !B
3.5" format removeable media [Floppy drive]

Maxtor 6Y060P0 [Hard drive] (61.49 GB) -- drive 0, s/n Y227613E, rev YAR41BW0, SMART Status: Healthy 96 Megabytes Installed Memory
Local Drive Volumes

c: (on drive 0) 25.68 GB 20.44 GB free
d: (on drive 0) 20.17 GB 20.10 GB free
e: (on drive 0) 15.61 GB 15.61 GB free
 

A:i need to know what memory to use for the american megatrends 062600 07/15/95

Zip over to this site:

http://www.crucial.com/
 

Read other 1 answers
RELEVANCY SCORE 81.2

I have a Tiny m720 PC and I just connected it to my new Lenovo ThinkCentre TIO 23.8" Gen3 Monitor. I have started getting this error with two loud short beeps on startup:   American Megatrends - Warning: In TIO mode, please use the adapter shipped with Tiny PC or TIO that has higher power rating. How can I disable and get rid of this? Tried restoring default BIOS settings and also re-flashing BIOS by no luck. Attachment: Screenshot.  Update: Contacted Lenovo tech support. He asked me to hit 'Esc' (which is not even an option on that screen) and was in a hurry to end call.

Read other answers
RELEVANCY SCORE 81.2

Ok, so before you reply, please make note that I didn't build this pc myself, it was custom built in a company by order. I don't know a thing about inside of computer. Of course, I know the main parts, but repairing or tinkering, nooo.

Pc specs:
Intel i5-2400 3.1 Ghz Quad Core
8 GB of RAM
Nvidia GeForce 550ti Graphics Card.

The thing is, in my opinion, this pc is properly cooled and built, because I've been having it for almost a year and I've never had this problem before.

So okay, I got back home and turned on my pc. And I noticed a problem. My video was slow. Videos on youtube were slow and choppy, I tried like moving windows and their movement was slow. At first I thought its a video card or monitor problem and I tried rebooting my pc. When I pressed restart, before booting windows, the computer shows the window:
American Megatrends

(Computer info)

CPU over temperature error!
Press F1 to continue setup.
Is it really overheated? Because I've never had this problem before, I didn't had it the other day I was using it and I'm using it a lot. What to do? I really can't just open up the case and see the problem, I'm not that experienced.
 

A:American Megatrends - CPU Over Temperature ERROR

Why can't it be overheating? Things do break, or come loose, and they can get dirty too.

Download HW Monitor and see what the CPU/Core temps are, for that matter check all the temps. Best would be to post a screen shot of HW Monitor.

HW Monitor: http://www.cpuid.com/softwares/hwmonitor.html

If the computer is truly overheating then it will need to be opened up to see why.
 

Read other 1 answers
RELEVANCY SCORE 80.4

A friend of mine came to me with this problem. He has an American Megatrends motherboard and can't get it to boot past the Checking NV RAM.. part

here is what is on the screen when it freezes
American Megatrends
AMIBIOS
TYAN TSUNAMI AT V2.00.01 012520001800
Intel 440BX AGPset

P II, 400Mhz
Checking NVRam..

then down at the bottom of the screen it says
62-0101-00999-0010111-071595-440BX/GX-51830001-5

What we have done:
Switched PCI video card to another PCI slot
Disconnected everything but the floppy/cd/harddrive
Reseated the RAM, switched RAM slots, and tried different RAM modules with ones that are known to work.

He says 1 time it made it past checking NVRam (where it counts the RAM) and then froze when it first said hit del to enter BIOS.

Edit: He also remembered that when he first booted he had 3 RAM modules in and all it would say is American Megatrends with the logo and that was it, so he removed 2 and left 1 and thats where we are now.

2nd Edit: When I asked him what happens when he tries it with no RAM he says "nothing, it beeps".

Anyone have any ideas on what to try next? Could it just be that the motherboard is bad where the RAM fits?
 

A:Problems getting to POST on American Megatrends MOBO

Alright - I just recieved word that it now works. Which leads me to believe that even though it appeared we had the RAM set properly it wasn't.
Now it boots into Win98 and just gives the usual errors when you don't have proper drivers installed and such, I'm going to let him work on that on his own because I think he has a pretty good handle on getting that set straight.
(he pulled this PC together from scrap parts so even getting this thing to run is a plus for him)
I'll post back with any other motherboard related problems that might crop up.
 

Read other 1 answers
RELEVANCY SCORE 80.4

exactly as the title
I really cannot find it

A:Can someone link me to American Megatrends inc 5.20 bios download?

The manufacturer of the computer is ?
The Make of the computer is ?
The Model of the computer is ?
The serial number is ?

does the computer run?

Read other 9 answers
RELEVANCY SCORE 80.4

American Megatrends
WDC WD5000AAKS 65YGA0
 
Hard Disk Failure is Imminent
 
Please back up hard disk and have it replaced!
 
Press F10 for Setup, Press F2 to Continue
 
My pc just recovered from Poweliks / Adclicker trojan with dc3's help.
 
Thread is here:
http://www.bleepingcomputer.com/forums/t/553837/problem-with-7zip-leaving-zips-in-temp/
 
Speccy ran previously in that thread:
http://speccy.piriform.com/results/NdhcfMCbY03XoIJuO0zaJCS
 
Computer is:
 
HP Pavilion m9000t
Windows Vista, SP2
 
 
NOTES: Some things that happened since Friday after using the computer and making sure things were working.
 
Installed Flash player update.  Norton Full System Scan ran late Friday night.  Everything normal.
 
Yahoo Toolbar showed up in IE9 out of the blue.  I did have it in add-ons but it was disabled permanently but I could only disable it temporarily.  When I tried to disable permanently, it said contact system administrator.  So I uninstalled it from Control Panel/Programs.
 
Sunday night I got a performance alert from Norton NIS about high usage problem and 176 actions performed.  I copied to notepad and from what I can remember it had something to do with Firefox cache/doomed files and I think they were deleted when I cleared Firefox cache.
 
I ran Malwarebytes scan Sunday night.  Normal.
 
Shut down the computer normally and turned it on today and got the Megatrends... Read more

A:It's Me Again...American Megatrends Disk Failure Imminent

F10 will take you to BIOS setup. F2 will continue to boot to Windows. What is interesting is Speccy shows the SMART status as good.

Read other 37 answers
RELEVANCY SCORE 80.4

how to overclock xps 730x i7 920 3gb of ram with American Megatrends Bios ?
please and thanks
 

Read other answers
RELEVANCY SCORE 80.4

Does anyone know how to find and harness a recovery partition on an American Megatrends K7S41 desktop?

I have tried DISKMGNT.MSC but it shows only the main C:\ drive

Thanks

John M.

Read other answers
RELEVANCY SCORE 79.6

hi folks. good day to you all. my name is max. i can install windows and manage basic troubleshooting related to software without any problems. a couple of months back i installed windows xp on my friends computer and it was working fine but a month after installation, when he booted the comp up, he would get the startup options msg (safe,normal and so on) instead of windows booting up normally. when he tried to boot it up in any mode,the windows xp loading logo would just appear and windows just kept restarting. i thought it might be a software problem ,so i made a fresh install of xp and it was working fine . but now once again the same problem seems to have occured. this screen pops up when he starts the comp. i have included the image he sent me (its a bit blurry but you can make out whats on it). i searched about it and as you can see in the image, the problem seems to be about CMOS settings. now, from what i have learned so far after researching about it is that its either the CMOS battery that has lost its charge, died, or maybe its just a CMOS (or bios? not sure) settings problem. can you guys please take a look at the image and tell me what exactly is wrong and what steps i would have to take to fix his problem? thank you in advance.
http://tinypic.com/view.php?pic=rr2sch&s=5
 

A:Solved: CMOS settings problem american megatrends.

Read other 9 answers
RELEVANCY SCORE 79.6

I have a desk top dell, running vista. I hardly do a thing with my computer, and i started it up n a screen came up with the American megarends screen there. something about the " samsung hd642jj ata device. when i checked it through the computer it said that is working properly. I,m not a computer person so any info would be great.
 

Read other answers
RELEVANCY SCORE 79.6

I want to format my computer and reinstall windows 7 from a flash driver. I have everything set for that already, except that I can't access my BIOS.

I need to access the BIOS to change the boot sequence and put my flash driver on 1st priority.

Here is my system information:

How can I access the BIOS? Help please.

A:How to access my BIOS? (Version/Date = American Megatrends Inc. V2.4)

Power on the computer and the system will start the POST (Power On Self Test) process. When the message "Press DEL to enter Setup Menu" appears on the screen, press <DEL> key to enter Setup.

Regards,
GEWB

Read other 9 answers
RELEVANCY SCORE 69.2

Here's the problem: When I start my computer, I'll get a black screen with a bunch of text with "American Megatrends" as the header. The screen is unusual, and on the bottom it says "CPU fan error!, press F1 to continue." If I simply press f1 and ignore it, my computer eventually shuts off, and restarting my computer doesn't get my display back, I have to reset my cmos.

Things that I've tried: Now, I had this problem before, and my computer doesn't have a cmos switch, so I had to take out the battery for a couple minutes, and that worked.
Today I woke up to have the same problem. Only this time, when I took out the battery and put it back, the problem persisted.
So I tried entering my system setup and set "CPU fan speed" to ignore, that still did nothing.

So I'm aggravated, annoyed and helpless. Any help would be appreciated.
 

A:American Megatrends "CPU fan error!"

Read other 15 answers
RELEVANCY SCORE 60

ok... so the other night my computer was fine, shut down normally, etc. then last night i tried to start up. Fan starts, BEEP, lights on keyboard flash and the bluse ASUS screen comes up, but it doesnt go any further.
i have tried pressing all of the keys on the keyvoard (i think) but nothing happens. the cd rom drive will open and close.
I have up-to-date norton antivirus and microsoft spyware installed.

i dont want to lose everything on my computer by re-installing windows as i havent backed up for while and all my photos are on there (DOH!!)

I dont understand.. it was fine...
I don't know much about computers..I know how to use them ,but I dont know how to fix them
AMD K7 ATHLON XP 2400 PLUS (266FSB)
MSI KM3M-V SCKA DDR333 8XAGP VGA+SND+LAN ATX

I have an ATI Radeon 9600 (maybe?) graphics card which has been in for a few months with no probs
I recently added an ASUS 7135 TV card thig which has beenin a few weeks with no probs. Most recently I added my old Epson photo printer for which i downloaded drivers form epson site (it said it was the XP driver although I got a warning about it not being something or other and did I want to continue and so on, i continued...). this was about a week or so ago and it has been working ok.

Its just odd as it was fine the night before and now it wont do a thing...


I am going home tonight with the printout of this link
http://www.techsupportforum.com/comp...c/42004-1.html

although it doesnt sound like quite t... Read more

A:PC stuck on ASUS screen

You need to do a bit of troubleshooting -- take it one step at a time.

At first I thought you had an ASUS motherboard, but you don't. You have an MSI motherboard. The only ASUS product I see mentioned is the TV card, so why not remove it from the equation.

With your PC turned off, remove the ASUS TV card and then see if your PC boots. Reply back here with your findings so we can do further troubleshooting, if necessary.

Read other 8 answers
RELEVANCY SCORE 59.2

so i recentley bought a new pc, its less then a week old so imagine my horrror when i booyed it up today to see it stuck on the asus screen. i tried the usual unplug mains and leave 10 minutes, disconnect all usb cables like printers etc. nothing works, cant axcess bios or anything
any help appreciated

A:stuck on asus screen on reboot

Hi if it was me I would return it. have it exchanged. or fixed under warranty.

Read other 4 answers
RELEVANCY SCORE 59.2

Specs: ASUS G75VX. Initially it had Windows 8 but upgraded to Windows 8.1 several months ago.

Okay. This problem has been happening the past 2 months, giving a handful of different error codes, and the dreadful Automatic Repair loop. I can send in my laptop to Asus for repair, but I want to keep it as a last resort.

Initially, this problem occured when my computer suddenly froze, forcing me to hold down the power button to shut down. Upon booting it back on. The black screen pops up, with nothing happening for few minutes, then starting Automatic Repair, black screen again, and repeat.

From the various error codes, the one thing they have in common is that the files are missing or contain errors, noticeably system32 files. Another thing I see that's never changed, is that they only occur when I force shut down the computer, or a BSOD (which I got once, from a KERNAL_DATA_INPAGE_ERROR just yesterday).

Sometimes, though luck (more of restarting the computer over and over), I escape the Automatic Repair loop, and changes to "Diagnosing your PC...". It then fixes a bunch of stuff, although nothing I can recognize from the file names, it's a bunch of random letters with dashes similar to a serial code. Afterwards, the computer boots up like normal, although another problem has arisen.

From that day, whenever the computer boots up normally, the disk usage spikes up to 100%, and lags the computer out. This lasts a few minutes to an hour, so I wait it out. I... Read more

A:Asus gives black screen, I'm stuck

Read other 8 answers
RELEVANCY SCORE 58.8

When I start my pc it gets stuck on the ASUS mobo splash screen. I cant even get into my BIOS. I cleared the CMOS. POST is one beep which should be good. I even went as far as connecting the hd from the bad system as a 2nd hd on a working system and it wouldnt boot as well. Wont even boot to Windows XP System disk.
Here's are list of components on my system:

ASUS A7N8X mobo
Samsung 1gb PC2700 RAM
ATI Radeon 9800 graphics card
WD HD WD1200BB
AMD Athlon XP +3500 CPU
OS: Windows XP

any help would be greatly appreciated
Fäntom


:blackeye:
 

A:PC stuck on ASUS mobo splash screen

What happens with just the motherboard, memory, and video card installed?
 

Read other 1 answers
RELEVANCY SCORE 58

I would appreciate tons of help and input.
My netbook froze on friday night. Try to restart, but was stuck at grey screen. It has asus logo and eee pc written. The options f2 to run setup and tab to display bios post yields nothing. In other words, pressing either button doesn't work.
I have removed the battery, pressed the power button without the power cord, put everything back in, tapping f2.
So far, no progress. Few times, i try pressing f2 similtaneously as i hit the power button, i got american megatrends screens. Still, none go further.
I have this netbook for a little over a year. The warranty just expired a month ago. It is running window 7 starter already installed when i got it at bestbuy.
I had contacted asus support, and tried some i mentioned above. I prefer to do this by myself.
I would appreciate any help.
 

A:My ASUS netbook won't boot (stuck at grey screen)

Read other 12 answers
RELEVANCY SCORE 58

Everytime I turn on my Asus eee pc 904HD I get this. Screen and it doesn't start when I select either options help please

A:my Asus is stuck in the secondary black boot screen

Boot off of the Windows Disc Or download the Recovery Console ISO. Burn it to CD with IMGBurn Boot off of the CD and get to the Recovery Console. Here type chkdsk /R and press enter. The Check Disk utility will try and fix any file errors.
You can also download the ISO image for Seatools, WD DataLifeGuard or Drive Fitness in my signature and burn the image to a CD using IMGBurn also in my signature and boot off of the newly created CD and run the Quick and Advanced tests on the HDD to test the integrity of the drive.

Read other 1 answers
RELEVANCY SCORE 58

My Asus computer is stuck in the Aptio setup utility screen. (American Megatrends version 304). See screen grab

I have tried removing battery and power. Any tips on how to extract it from this screen?

Thanks in advance.
 

Read other answers
RELEVANCY SCORE 58

A cursed ASUS laptop - I've posted about it elsewhere in these forums - was working tonight, has worked fine for about 7-8 weeks, and then when it was put to sleep by closing it, upon being opened, would only display the ASUS splash screen (the first thing one sees when turning it on - basically a black screen and the word ASUS).

The computer turns off fine with the power button. Turns on fine too, but gets no farther than the splash screen. No POST beeps, nothing at the bottom of the screen saying how to get to setup or anything.

If a bootable DVD is inserted and the computer started, there are some noises like the computer hardware is interacting with the DVD (sorry, I'm not sophisticated enough to describe the noises, other than to say I never hear the DVD start to spin fast), but then 5-10 seconds later the noises stop and it's just the splash screen again and nothing else.

Odd laptop charger behavior, culminating in sparking last night describes the last issues with this computer, which were seemingly fixed about two months ago with the replacement of the motherboard.

It's going back to the shop, but I'm wondering about any intelligent suggestions as to what's wrong here.

Obviously the "repair/replace" teeter-totter is inexorably tipping toward replace.

A:ASUS laptop stuck at splash screen - won't boot from HD or DVD

Google is my friend. Took a lot of poking, but Stuck on asus logo on startup?? - FixYa suggests the following:





Quote:
Same problem here with my wife's Asus laptop. Called Asus and they said to unplug charger, remove the battery in the back, hold down the power button for 10 seconds. Then, replace battery, then charger, then press the power button and wait for startup. First time it got stuck at the windows loading bar screen for like 5 min. which is abnormal. Did a hard power down (press and hold power button til it shuts off) then restarted again. That time it worked and all is well so far. Could have been due to a static charge as she was on our couch with our dog backing up movies so charge might have entered through the CD/DVD drive opening. (?) Not sure, but if you are sitting on a static-prone couch with your laptop its probably best to sit on top of a bounce sheet.


I did that and it worked.

I'll mark the thread as solved a few days down the road if no further incidents.

Meanwhile - any comments on what might have led to this situation?

Read other 5 answers
RELEVANCY SCORE 53.2

I do see that you have had a similar problem already on this forum but it didn't fix mine (I probably wasn't doing something right).
My Laptop wont start up it goes to the Windows Recovery error page where you have to choose either Launch Startup Repair (recommended) or Start Windows normally. Both of these options lead you to the same result to the Asus Preload Wizard page.
I tried pressing F8 and F9 but didn't get anything.
Appreciate any help you can give me. Thank you

Cheers
 

Read other answers
RELEVANCY SCORE 52.8

American Flag Screen Saver from MS

Sorry if a repost,

Friend informed me.........
It's from Microsoft.
http://www.microsoft.com/downloads/...bf-3dee-4a28-ade1-419f09e2c394&displaylang=en
 

Read other answers
RELEVANCY SCORE 52.8

Hello, I upgraded from windows 7 to windows 8 and ever since then I get a screen at reboot or start up that's a American Megatrends screen and its saying my HDD is bad and I need to backup and replace. I go into my HDD C: and do a "Check drive for for system errors" and it say its fine. Now, let me start from the beginning.....

When I first upgraded it installed fine ect and after the install of updates it rebooted and this is when i get the first glims of the American Megatrends screen. My PC was running so slow and freezing ect and finally I got the blue screen and that's all it would do every time I tried to restart it and I didn't get a chance to backup anything what so ever. I called MS and they wanted me to DL the copy again onto the PC I was using and burn the ISO image to a DVD and boot from it. I did what they said but here is the kicker...

The PC I was on was a 64-bit PC and I thought the other PC was a 32-bit and with the new Windows 8 it auto decides for you . so what i did was downloaded the copy for the 64-bit on that PC (Just for kicks) and I had a desktop PC at the house as well and I know its a 32-bit so I DL a copy using that machine for the copy I was going to use to re install or try to fix the PC with. Long story short..

It allowed me to boot from DVD and I re installed the Win8 32-bit copy and it installed but I still get the American Megatrends screen saying I got a bad HD hit F1 to go on.

Now for some reason my PC is running WAY better s... Read more

A:Win8 Upgrade now American M screen & bad HDD

Welcome to EightForums.
Check the hard drive with the manufacturer's diagnostic tools.

Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

Read other 3 answers
RELEVANCY SCORE 52.4

Hello.
I have been experiencing an issue for the past two hours or so. I booted up my laptop only to find that the laptop would not boot past the "Please Wait" screen. From here, there is absolutely nothing I can do other than move the cursor. I tried looking for a way to boot it into safe mode, but I was stunned to find there is no way of doing it without booting into the OS itself at least once, and the method of 'turning it off and on three times using the power switch' did nothing. From here, I have no idea what my options are. From what I've read this issue is typically the result of a interrupted update. This could very well be the case, since I unplugged my laptop this morning and set it to shut down, so it very well could have run out of energy during the process.

What can I do from here? I should have a recovery drive on the second partition of my Hard Drive, however I don't know how I could boot that from the recovery menu in the BIOS options. Can someone help me with what I can do to fix the problem?
All help greatly appreciated.

A:Windows 8 Asus K55VD stuck at "Please Wait" boot screen.

Hi have you tried CTRL+ALT+DEL that should take you into a menu where on of them is to do a factory reset or run the trouble shooter.

Read other 1 answers
RELEVANCY SCORE 52.4

Hello, first of all I'm not that computer savy, so please keep this in mind! I can google my way around most problems, learning as I go, but this one is giving me trouble. Also, English isn't my first language so I might use imprecise terms, sorry in advance about that.

I bought this new laptop last week, the Asus N551JK-DM193H, and I'm pretty happy with it. It came with Windows 8.1.
I noticed yesterday that, all of a sudden, the fn+screen brightness keys didn't work anymore. There has been a graphic driver update, I can't remember if I was able to adjust the brightness right after that honestly.
I found this forum while looking for a solution, I've tried rolling back the driver but it didn't do anything. Trying to change the brightness manually from the power options or the charm bar isn't working, either.
Also, sometimes the screen dims a bit and then gets back to the normal brighntess.It's quite subtle, but noticeable if I'm on a page/program with lots of white space.

I have pretty delicate eyes, so not being able to adjust the brightness+intense work using the laptop is already becoming a problem. I hope you can help me, and thanks in advance!

(I hope I have posted this in the right category,since I saw similar issues were here)

ETA: graphic cards are nvidia geforce gtx 850m and a Intel HD Graphics 4600 (integrated)

A:Screen brightness "stuck" on Asus N551JK-DM193H, win 8.1

I can only suggest very non specific things to try.

Have you tried doing a proper full restart (not a shut down and reboot).
You could try 'System Restore' to a date when you know it was working.
Finally, as its so knew and if you haven't much installed then doing a factory reset is an option. That will take it all back to day 1 condition.

Read other 2 answers
RELEVANCY SCORE 46.8

Greetings,

My almost 3 year old Asus X52 F3SV Notebook suddenly froze and shut itself down today. It will not boot past the 'Asus' logo screen. The furthest it got was 'loading windows', but quickly rebooted once that screen showed up.
It has been running quite hot lately, but i cleaned the fan out last weekend, and it had been running without problem since then.
I'm running Windows Vista Premium, with no other real problems until now, with up to date windows updates and regular Spybot and anti-virus scans.
There were random multicoloured lines running through the Asus screen on the first reboot after freezing. Could it be my graphics card? (Nvidia 8600m). I did not hear any crackling/popping sounds, so I really hope it's not dead yet.
I've looked around these forums, but couldn't find a similar problem/solution.

Thank you.
 

A:Asus x52 F3SV notebook not booting past Asus screen

Try running Bios defaults

This settings area can be called:
Bios Setup
CMOS Settings
System Setup
even just Setup
You can enter it by pressing the keyboard key that is displayed on your screen when first turning on your computer
Its sometimes:
A Fn Button like F1, or F2, or F10 or some other Fn key
DEL key
(whatever the computer states on screen when you first turn on your computer)
Once in Bios Setup, locate Setup Defaults (sometimes called Optimized Defaults)
Apply it, then Save and Exit Bios Settings (which is usually F10, but it will tell you in the Bios Settings screen)

If that doesn't help try reming and re-seating your Ram cards (even your hard drive)
You can download your Manual to find the locations of these components, but they are usually located under the laptop, under the covers

If it is your Video card (onboard) then that was be a big concern
You may need to locate the disassemble guide online, then blow out all internal dust

It may also require a CheckDisk scan
You can read HERE on how to do that outside Windows
 

Read other 1 answers
RELEVANCY SCORE 45.2

After a power outage 3 weeks ago I was having issues with the system going down at around 5 minutes and then less and less time after that. I was told it was a display issue and to uninstall and reinstall my display drivers. I uninstalled my drivers and it was still the same. I felt like it was temperature related. I found my graphics card (Radeon 5700) was dirty. I cleaned it and thought I was back in business. Everything was back to normal, all I needed to do was update my graphics drivers. Once that was done, my computer would no longer load past the Windows splash screen.

I used Puppy Linux on a flash drive and I have access to everything. I can use the internet and access all my files. This to me says that it is not a hardware issue.

The fact that when I try to go into safe mode it gets stuck for more than a day on classpnp.sys (when I finally give up). I understand that classpnp.sys has loaded but, there is something after that that the computer can't load. I have seen some people have atipcie.sys load after classpnp.sys and it makes sense to me that it would be a graphics driver that is causing the issue.

I need my Windows 7 up and running for school and work projects. Any ideas, thoughts, or help would be greatly appreciated.

A:Stuck on Windows splash screen, safe mode stuck on classpnp.sys

Hi ,
Follow this tutorial to run SFC /Scannow at boot.
SFC /SCANNOW : Run in Command Prompt at Boot
If you want to run the command from a USB drive follow this tutorial.
Boot Windows 7 System Repair Disc from USB Using Grub4Dos
And apply it to the first link instead of the ERD (Emergency Repair CD).

Generally a good tutorial to read.
Troubleshooting Windows 7 Failure to Boot

Read other 6 answers