Over 1 million tech questions and answers.

Installing Server 2012 R2 on P50

Q: Installing Server 2012 R2 on P50

Hello I have been asked to load a lenovo P50 Thinkpad with Windows Server 2012 r2. It currently has Win 10 loaded. A couple of issues. When I boot the laptop to the usb the setup screen is very small. Also during setup there are no drives located to install windows to. I have a raid 1 setup on the laptop. I am probably missing some information. Please let me know some suggestions thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Installing Server 2012 R2 on P50

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 70.8

Created RAID1 and RAID5 on my Physical server
Created a
Bootbale  USB to install  ISO Window 2012 r2 on supermicro x9drl-if Server.

But it is returning with an error:




fouad.lahoud

Read other answers
RELEVANCY SCORE 64.8

I'm hoping someone can help me, as this is driving me mad. I have a brand new Microserver Gen8, and I'm trying to install MS Windows Server 2012 R2 Trial Edition on it. No matter what I do, whether using Intelligent Provisioning or manual installation, I get an error "Windows cannot find the Microsoft Software License Terms. Make sure the installation sources are valid amd restart the installation." I have updated the system firmware, and tried to install via a network share and a USB stick, with the same results. I can install the same OS in VirtualBox in about 30 minutes so I know it's not my installation ISO. This appears to be a common problem, and I'd really appreciate some help. MTIA, Andy 

A:Installing MS Server 2012 R2 Trial on Microserver Gen8?

Did you get this sorted - I have the same issue.  How do people fix this with an HP OEM install that doesnt provide a source disk?Its installed on the server disks as image, but then goes away when installed.Change the server disk array and you dont have any branded HP server 2012 source disksThen Provisioning doesnt work   

Read other 2 answers
RELEVANCY SCORE 64.8

Anyone run into this error?
Says concurrent installation I/O error.
I am following the instructions to apply a hot fix, but not sure if this is a Windows 10 ploy or a real error message.

Problem Event Name: SQL110MSI
P1: 11.0.2100.60
P2: 11.1.3128.0
P3: SqlSupport.msi
P4: 0x45C91AF3
P5: 997
P6: Install_SqlSupport
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Any suggestions?

Thanks in advance

Read other answers
RELEVANCY SCORE 61.6

Hey,
recently Microsoft released an optional update to Internet explorer 11 on Server 2012 "R1". (Previously IE11 was installed)
I made the big mistake of installing it, now IE11 is crashing every day - usually with this errors:
Name of the failed application: Explorer.EXE, Version: 6.2.9200.16628, Timestamp: 0x51a94434
Name of the faulty module: twinui.dll, Version: 6.2.9200.22769, Timestamp: 0x5cd484c5
Exception code: 0x80270249
Error offset: 0x000000000037d52b
ID of the failed process: 0x41c8
Start time of the failed application: 0x01d56de546b7c940
Path of the failed application: C: \ Windows \ Explorer.EXE
Path of the failed module: C: \ Windows \ System32 \ twinui.dll
Report identifier: 4ad79613-d9e0-11e9-9504-44a84240e5ec
Full name of the failed package:
Application ID that is relative to the failed package:Name of the failed application: Explorer.EXE, Version: 6.2.9200.16628, Timestamp: 0x51a94434
Name of the faulty module: twinui.dll, Version: 6.2.9200.22769, Timestamp: 0x5cd484c5
Exception code: 0x80270249
Error offset: 0x000000000037d52b
ID of the failed process: 0x41c8
Start time of the failed application: 0x01d56de546b7c940
Path of the failed application: C: \ Windows \ Explorer.EXE
Path of the failed module: C: \ Windows \ System32 \ twinui.dll
Report identifier: 4ad79613-d9e0-11e9-9504-44a84240e5ec
Full name of the failed package:
Application ID that is relative to the failed package:
Or this:
Name of the failed application: ta... Read more

Read other answers
RELEVANCY SCORE 59.2

HI
KB3088195 and KB3102939 were removed after installing 2018-05 Security Monthly Quality Rollup for Windows Server 2012 for x64 based Systems (KB4103730). These two removed patches are not listed in WSUS as being superseded, nor in the list of superseded patches
by KB4103730. Was removal of these two patches a fluke or where they left out of the documentation?

Read other answers
RELEVANCY SCORE 58

Hi
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system? Please help.

A:Installation of sql server 2012 and visual studio 2012

SQL Server has an upgrade option that is pretty painless. Just run the setup file from your 2012 installation media and click the upgrade option. It will ask you what instance to upgrade, run some checks, and then upgrade it for you.

Visual Studio is a little different. If you install 2012 without uninstalling 2010 first, you will simply just have both versions to choose from. You can completely uninstall 2010 before installing 2012 by finding your 2010 installation file and adding the uninstall and force switches when running it(ex. "C:\vs_ultimate.exe /uninstall /force").

If you keep 2010, 2012 will ask you if you wish to import your settings and whatnot from 2010. If you uninstall 2010, 2012 will just have it all when you open it for the first time.

Read other 1 answers
RELEVANCY SCORE 57.6

Sais here, Install more than one operating system (multiboot) - Windows Help

I should install the older operating system first, windows 7, to run a duel boot with windows 2012 server.

But I am already running 2012 server and would like to just install windows 7 to it. Surely it will work.

I was going to shrink my c volume to create a new partition within my c hard drive and install windows 7 to that.

Or I could just install it to another drive, which I'd prefer not to do. Any advice regarding possibility of doing this?

I presume this is similar to installing windows 8 first and then wanting to install windows 7 afterwards as a duel boot.

Please advise further, cheers

A:Installing Windows 7 after Windows 2012 Server Installatio

It used to be that way with XP, but you`re fine to install 7 after Server 2012.

Personally, I would get another drive, hard drives are cheap and 7 deserves its own.

Read other 3 answers
RELEVANCY SCORE 55.2

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 54

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 54

Hi Experts,
Could someone please help me how to copy file from Windows 2012 server to Linux using rsync.

Read other answers
RELEVANCY SCORE 54

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 52.4

Hello, I own my own IT consultation and management company and I have a few clients whom I will be upgrading their Servers to Server 2012. I thought it a good idea to have a place on this website to talk about and gives tips about Windows Server 2012. Please Fill out the poll so the Moderators can see what kind of interest the community has in this suggestion. Thanks!

A:When are we going to start a Server 2012 (Server 8) Forum?

Not a lot of interest unfortunately. Let me think about it and I will see what we can do.

Read other 2 answers
RELEVANCY SCORE 50.8

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 50.8

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 50

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 48.8

Hello HP forum,I want to deploy a wds server with the Thinclient recover tool.So that i can reach the image without usb stick, and from another location.I hope you can help me with this.Kind regards,Marc

Read other answers
RELEVANCY SCORE 48

Hi,
I became a member of dreamspark simply because they offer Windows 8 for free. I became a vertifyed member only to find out that they dont offer Windows 8 for free to Students. However they do offer Windows Server 2012 free to student.

what is it?? Can i use it as Windows 8?

A:What is Windows Server 2012

Hello Mitchell,

Windows Server 2012 is an operating system like Windows 8, but designed for servers.

Microsoft | Windows Server 2012

Read other 17 answers
RELEVANCY SCORE 48

Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew

A:windows server 2012

  
Quote: Originally Posted by ascomputers


Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew


What version of server 2012 do you have? Also what client operating systems do you have? Windows 7 Home premium, professional, ultimate?

This can affect what services you can offer to clients.

Josh

Read other 9 answers
RELEVANCY SCORE 48

Hello Guys,

So basicly I have a Windows Server 2012 Hypervisor and it recently gets a lot of BSODs. I have run some programs and made a few searches to see if I could find a solution, but got nothing so I decided to try getting help from TechSupport FORUM.

From what I've it can be CPU or RAM but I don't really know and don't want to waste money without being sure. I have gone through the minidump but don't really understand it.

Can you guys check it, see if you find something?

Thanks in advance, hope you guys can help, I'm desperate

Read other answers
RELEVANCY SCORE 48

Hello all,

I know this is a forum dedicated to Windows 8/8.1, however Im having some issues with Server 2012 R2. I know it is very similar to 8.1 so maybe someone here can help me or at least give me some good ideas. Im having a hard time finding solutions online. If someone knows of a better place or forum to go to for this, please let me know.

Anytime I download software to install on the server I get this error message:

It happens with just about any software I download, doesnt matter what it is. Also, when trying to download something in Firefox, a lot of times it will tell me that the download failed almost immediately. The account Im using is a member of the administrators group. Ive tried restarting, running as administrator, etc. The only thing that seems to work is shift+right click -> run as a different user and running it as the built in admin account. Then most of the time it will allow me to install software or download software with Firefox.

Anyone have any ideas?

EDIT:

Something I forgot to add was if I do get it to download to my own user downloads folder, everytime something is downloaded the permissions are automatically set so I dont have permission to execute the file. This is what Im seeing in the security tab and permissions dialogs:

Read other answers
RELEVANCY SCORE 48

Hi, some time ago I deployed two servers for a small RDS environment.  They are both physical servers, session-based RDS.
I want to now get USB Redirection to work on them to enable the use of WebCams.  Looking through all the literature and articles, I get the impression that I need Hyper-V installed.  Is this true?  Was my initial deployment setup incorrect
or can I just add the Hyper-V feature now?   I am worried if I install that role that it will change the architecture of my setup.
Can someone please advise.
Many thanks

Read other answers
RELEVANCY SCORE 48

Hi 
I have recently installed a server 2012 and configured remote access and users are able to access RDP from all clients. Recently Windows 7 machines are not able to access the remote desktop, its shows an error "This computer can't connect to the remote
computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. " I have disabled the network level authentication from local policy but the issue still exists.
Windows 10 machines are able to connect the remote desktop.  
Please help me to resolve the same. 
Thanks.

Read other answers
RELEVANCY SCORE 48

I want to network the server LG Ncomputing monitors directly on our Local network using Cat 6 Ethernet cables, so that I could use the same software licenses as on server with around 4 more users connected. (My Computer monitor has a Cat 6 cable point with the Keyboard and mouse points too)

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 32 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2911 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Hard Drives: C: Total - 83113 MB, Free - 53941 MB; D: Total - 34579 MB, Free - 3989 MB; E: Total - 34579 MB, Free - 10957 MB;
Motherboard: Sony Corporation, VAIO
Antivirus: Windows Defender, Disabled
 

Read other answers
RELEVANCY SCORE 48

Hello,
 
I've been going crazy trying to help troubleshoot a BSOD.  I've used Bluescreenviewer to analyze the dump files, but I can't find a good solution.   I've attached images of the dump files from bluescreenviewer, and done searches on the errors referenced, NTOSKRNL.EXE and STORPORT.SYS.  We've updated all of the drivers, but I'm about to recommend driver verifier as well.  Please help!
 
Thanks,
 
cxzander

A:BSOD in server 2012 R2

These are both STOP 0x133 errors.  There's a bit of info on them on my webpage here:  http://www.carrona.org/bsodindx.html#0x00000133
Even more articles here (eventually I'll put them on my webpage:0): 
https://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/11184-dpc_watchdog_timeout-debugging.html
https://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/9310-dpc_watchdog_violation-0x133.html
https://blogs.msdn.microsoft.com/ntdebugging/2012/12/07/determining-the-source-of-bug-check-0x133-dpc_watchdog_violation-errors-on-windows-server-2012/
https://bsodtutorials.wordpress.com/2014/02/12/debugging-stop-0x133-and-dpc-internals/
http://bsoddebugging.blogspot.com/2014/09/0x133-dpcwatchdogviolation.html
 
Please run this report collecting tool so that we can provide a complete analysis:  http://omgdebugging.com/bsod-inspector/
When done a Notepad document will open with the name of the file and it's location. (By default it'll be a .zip file located on your Desktop)
Simply upload the .zip file with your next post and we'll move on from there.

If it doesn't work for you, then please try this:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
It's OK to ask for Driver Verifier if this isn't a production server (as it'll create downtime and also may slow the system down).
If it is, see if they can schedule some time to run Driver Ver... Read more

Read other 0 answers
RELEVANCY SCORE 48

Hello 8forums,

Really great forum here and I'm glad to join. If I posted this in the wrong section I apologize.

Okay now here's my problem. I'm currently trying to setup Windows Server 2012 for my dad. The main thing it will be used for is storage of movies, photos and backing up Excel documents for work. This is a copy a friend burned him onto a disk and is currently NOT activated. He wanted to check it out before purchasing the license. I have installed it onto an old HP Pavilion a1640n and everything went fine with installation but, now that it is installed I cannot connect his Win8 computer to it. I have Googled this and found a method but, it doesn't work. I'm told to open a browser and enter in the address bar " HTTP://Server-name/connect " (Server-name replaced with then name of his server) and I should get a connector software download page. I do not get this software download page I just get a server not found page. I have tried entering other possibilities into the address bar, too (192.168.0.xxx/connect, adding .com etc.) nothing works. If I can get any help with this it would be appreciated.

I have tried:

Completely reinstalled Windows Server 2012
Reinstalled Ethernet drivers on the WS2012 box

Things they may be causing the problem:

As I said the Windows Server 2012 is not activated.
The WS2012 box is stuck on public network type and the W8 box is stuck on private network type.
The WS2012 box does not show up on my network on the W8 box but,... Read more

A:Windows Server 2012 Help

Are you trying to access the server from a remote location using a local IP non outside routable address? Why are you trying to go through IE to get to the server?

Read other 3 answers
RELEVANCY SCORE 48

Hi, I?m having a hellish time with Win7 clients and Server 2012 RDS (and PCI!!)
 
I have disabled TLS 1.0 on the server;
DisabledByDefault=0x00000001
Enabled=0x00000000
 
Win10/8.1 connect (I?m guessing these don't even try TLS 1.0)
 
Win7 RDP is latest (v8), I have tried KB3140245 but really unsure what a ?DWORD Bitmap? is ?!? i first thought 32-bit DWORD but it doesn?t seem to want to take the value given, either 0x00000A00 or 0x00000200 ? so that I think is my first hurdle?
 
Do I need to run KB3140245/Reg keys on both Win7 and Server 2012? (that was a little unclear)
 
I don?t want to make too many changes to the Server 2012, as I need to revert back etc. so the client can work etc. (busy company with little offline time)

Read other answers
RELEVANCY SCORE 48

I have windows server 2012 installed on my vmware running ad, dhcp and dns.
after that I installed the client running windows 8.1.
but when I try to join the domain it says that the domain could not be found.
so I hit ipconfig in my cmd on the windows 8 and it didnt recieve any ip from my dhcp its ip address is169.254.153.23. so basicly my dhcp didnt give me any ip adress since my server is on 192.168.7.128 network subnetmask 255.255.255.192.
in the virtual machine setting I have both network adpters set on bridged: connected directly to the physical network.
when I open the dhcp on my server I have a red arrow pointing down on the ipv4 and ipv6 option but since I cannot ping my server at all I dont think its my dhcp but my vmware network.
does somebody know how to fix this?

sorry for my bad english
 

Read other answers
RELEVANCY SCORE 48

I have just installed Windows 8/8.1 - first time user
I just installed SQL Server 2012 and rebooted.

I can't find where SQL Server management studio is located. I've looked on the start screen and I've looked on the Desktop. I can't find an Icon to run it anywhere.

Any ideas?

A:Can't see SQL Server 2012 icons

While in the Start screen type "sql" and see if anything pops up. If so, and it's what your looking for, pin it to the Start screen.

Read other 2 answers
RELEVANCY SCORE 47.6

I can guess the answer, no, but you never know. Is it possible to upgrade Windows 10 Pro 64-bit to Windows Server 2012 R2? What happens if you run the setup from Windows 10 Pro? You will be given the choice to upgrade, or be prompted to restart and do a clean installation? As far as I know, Windows Server 2012 R2 is the server counterpart of Windows 10. They even share most of the drivers. Assuming you have a computer running Windows 10 Pro and want to convert that to a small server, running say Windows Server 2012 R2 Foundation Edition. Is that possible, or you have to format and clean install? Hopefully the drivers will be the same as in Windows 10.

Alternatively, is there any upgrade/addon to add server aspects in Windows 10 Pro (eg mail server, file server or HTTP server)? Is there an equivalent of Windows Home Server for Windows 10?

Thank you for your time.

A:Is it possible to upgrade Windows 10 to Server 2012 R2?

No. Windows Server 2012 R2 is the server version of Windows 8.1

The server version of Windows 10 has not yet been released, but it will be called Windows Server 2016.

And no, you cannot upgrade a desktop OS to a Server OS.

Read other 0 answers
RELEVANCY SCORE 47.6

I have installed Windows Server 2012 r2 on this Lenovo.  I assumed (much like Windows 10) Windows Server 2012 would install most of the drivers needed for this model, but very few drivers have been installed.Device Manager has several devices that need drivers.  Of course, Network drivers are on the list.  I need those in order to allow Lenovo diagnostics to update the drivers automatically.  I have tried to use Windows 10 64 bit drivers for the updates (both Intel and Realtek), but neither seem to be working.Can anyone help with this issue?

Read other answers
RELEVANCY SCORE 47.6

My office computer runs Windows XP Professional SP3 (see below), and I'm connected to our new server running Server 2012 Essentials. For the last month or so, at 4:00 every afternoon my computer loses its connection to the server. I have two programs that access the server, and both give me error messages and freeze, and I need to restart to get back to normal. I don't pay much attention to my clock, so I'm typically on the phone with a customer trying to accomplish something when my system has a meltdown.

The same error messages come up each time:

The Security System detected an attempted downgrade attack for server cifs/DELLSERVER. The failure code from authentication protocol Kerberos was "There are currently no logon servers available to service the logon request.
(0xc000005e)".

The Security System could not establish a secured connection with the server cifs/DELLSERVER. No authentication protocol was available.
According to the error logs, this happens in the evenings and early mornings too, although not every day. When it does happen during non-work hours, it looks like it's consistently an hour apart (1:10AM, 2:10AM; 4:10AM, etc. or 5:35PM, 6:35PM, 7:35PM). The error will show up 3 or 4 times in a row, then everything will work fine for several hours.

I do not have any idea where to start to fix this. To my knowledge, I'm the only one with this issue, so I'm pretty sure it's a problem specific to my machine

As alway... Read more

Read other answers
RELEVANCY SCORE 47.6

Good day

I recently started at a company where i assist in small IT related tasks.

Recently we have started to experience some trouble with our server, we will all still be working perfectly fine (via Remote Desktop) then all of a sudden we lose our connection to the server and when i go to see what the problem is, I see the blue screen
of death on the screen with the following message:
"Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you.
If you'd like to know more, you can search online later for this error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (TSFairShare.sys)"
 If anyone can please assist me in what this means and how to resolve it i would appreciate it seeing as i don't have
a clue in connection to servers.

Read other answers
RELEVANCY SCORE 47.6

On Windows Server 2012 R2 DHCP

I have a network in 128.19.4.1 -- 128.19.4.254 but now all IP address has been assigned to all system but i have 400 system i.e i want to increase IP address range so that all 400 systems can get IP address and internet and all should be able to communicate each other

How to resolve this issue? Please let me know if required more information.

Thanks.
 

A:On Windows Server 2012 R2 DHCP

Is this in a work place network?
 

Read other 3 answers
RELEVANCY SCORE 47.6

Is there a way to completely remove IE10 from Server 2012. I am not replacing it with another version. I just want it gone or disabled on the server.

Read other answers
RELEVANCY SCORE 47.6

Hello,

one of our virtual server crashes to BSOD regularly. I don?t have any clue what the reason of that could be.
I created the needed zip file and added it to the attachment.

can you help me to find the problem of this server?

Thank you!

Philipp

A:BSOD in Windows Server 2012 R2

whats the specification of the server, the os? cpu(s)? ram? we could do with more details

Read other 1 answers
RELEVANCY SCORE 47.6

Hello,..

There are suppose some pre-made groups in windows server 2012,..like guest, remote desktop users, administrator, administrators...etc...

So i want to know that how to modify "administrators" group settings to limit/disable some permissions without affecting "administrator" group !

Kindly help me.

Thanks

A:How to set permissions in windows server 2012 ?

Hi,

Which permissions/privileges in particular where you looking to remove from administrators?

Read other 5 answers
RELEVANCY SCORE 47.6

HP Pavilion Desktop - 550-020a (ENERGY STAR) Product Number:   M1P30AA I am after 4 drivers for this machine and Windows MultPoint Server 2012 Standard.BCM43142A0 - This is a bluetooth driver - Not really needed Network Driver - Broadcom Wireless (PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C&REV_01) - Not Really neededSM Bus Controller - PCI\VEN_8086&DEV_8C22&SUBSYS_2B2C103C&REV_05 - NeededVideo Controller - PCI\VEN_1002&DEV_6665&SUBSYS_90F11B0A&REV_83 - NeededIs there anywhere i can get drivers for these ?

A:MultiPoint Server 2012 Drivers

Hi: The only suggestion I can offer would be to try the Windows 8.1 drivers and see if they work. http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-550-000-Desktop-PC-series/7779690/model/... SMbus needs the Intel chipset driver. Graphics needs the AMD R5-330 driver. I don't see the bluetooth driver listed on the support page, so see if this one works. This package contains the Broadcom Bluetooth driver for supported notebook models that are running a supported operating system. Broadcom Bluetooth Driver is required to enable Broadcom Bluetooth devices. File name: sp67447.exe Try manually installing the drivers if the auto install doesn't work. If the drivers don't extract to a folder like they do on notebook PC's, use a free file utility like 7-zip to extract the drivers from the exe file and browse to the folder that 7 zip creates.

Read other 2 answers
RELEVANCY SCORE 47.6

Recently, Microsoft included the Windows Server 2012 R2 RTM on their Dreamspark basic site. Currently, I'm running the R1 version on a virtual machine using VMware Player. How can I upgrade the R1 to R2 while keeping all of my files and settings using VMware?

Do I just boot from the ISO (I haven't downloaded it yet) (CD/DVD settings inside R1 VM) and then it will detect and upgrade R1 or I have no choice but to create another VM and then manually replicate my files and settings from R1 VM? I really don't want to do the latter since it's very time consuming. I hope someone has thoughts on how to do this.

A:Windows Server 2012 R2 upgrade over R1?

Wow, I just redirected VMware to the R2 iso and just followed the simple steps and I'm now currently upgrading on VMware. I didn't know it was possible to do that. I'll mark this thread as solved if there are no issues with the in place upgrade. Hopefully, everything works fine.

Update: everything went smoothly and now enjoying Server 2012 R2. Sadly, no colorful backgrounds in R2 unlike 8.1. All of my "3D" Metro App games like Pinball FX2, Jetpack Joyride, etc. work perfectly after the in place upgrade .

Read other 1 answers
RELEVANCY SCORE 47.6

Hi all,
We are using a RDS environment with 2 Windows Server 2012 R2 Terminal Servers, with aprox. 30 users on each server. The VMs are Virtual Machines.
We're facing a CPU usage problem with LSM (Local Session Manager). After a reboot of the server, this problem is "fixed". After about 3 weeks the problem returns.

Task Manager screenshot:

Stack of svchost.exe in ProcessExplorer shows:

I have already tried the following:

Run Windows Update, all servers are up-to-date.Running HP SPP on physical servers, all drivers/bios are up-to-date.Running Integration Services on the virtual machines.running 'sfc /scannow' on the servers.

The problem persists. Someone familiar with this problem?
Thanks in Advance!


Sincerely, Martien van Dijk. Please remember to mark the replies as answers if they help and unmark them if they provide no help. Check out

My Blog!

Read other answers
RELEVANCY SCORE 47.6

I have installed WIN Server 2012 on my laptop using a new volume and dualBoot.
I would like to set it up on our domain but I'm not very technical. I have run NSLookup but I don't really know what I'm looking for. I haven't yet setup the DNS on the server.

Thank you in advance for any assistance you make be able to offer.
 

Read other answers
RELEVANCY SCORE 47.6

Hey guys,

This is the first time using the forum so I apologize if this has been put in the incorrect place. My brother recently installed Hyper V Server 2012 r2, which boots up everytime I start my laptop. I just want help in how to completely remove the software and help get back my Windows 8. Neither me or him know how to get back to windows 8.

Thanks in advance guys.

A:Help with Windows Hyper V Server 2012 R2

Well, you must have a bootable Windows 8 DVD or USB. Go to the BIOS settings, select to have the DVD or USB device as first device. Then it should say "Press any key to boot from CD or DVD..." if you have a DVD or it will show the OEM or Windows logo directly (USB). When you are prompted for the installation type, choose Custom. Make sure you have backed up your files. Delete every partition of Disk 0 and then choose the Unallocated Space to install.

I hope this helps you.

Read other 4 answers
RELEVANCY SCORE 47.6

Hi,
I am using windows server 2012 R2 on hyper-v. because of some reasons my server turn off. When i start the machine it just keep spinning. Please find the below screenshot. Can anyone give me a solution to make it work.

Read other answers
RELEVANCY SCORE 47.6

I have a Server 2012 with RDS Role installed joined to a server 2016 domain..

All clients connecting to their server profile get the following view of their mapped drives:


Clicking on the mapped drive works fine to access the actual drive but it will keep the Disconnected Network Drive label on it even after an initial click.. 

Read other answers
RELEVANCY SCORE 47.6

Hi people, I'm on a ASUS G759JW and recently had to run a DISM source restorehealth using the files provided by topgundcp on this thread. Worked like a charm, DISM came up squeaky clean. Did not have access to local group policy editor as I'm running basic 8.1 and files provided by Microsoft online didn't contain ISO.

Afterwards I was trying to resolve some strangeness in event viewer assuming a lot of it was being caused by incompatible drivers. Downloaded some programs from Windows Assessment Toolkit to scan for issues. Drivers came up fine besides having a TON of unnecessary oem's (however I'm still trying to find some clear instructions on how to remove these drivers using DISM without spending a huge amount of time. I wasted over a week trying to fix the previously mentioned issue and can no longer afford to be blindly jacking about with it.). Still getting a lot of messages in event viewer but far fewer critical and warning entries than I was before restorehealth (pointing device is driving me nuts). I've been checking event viewer mainly to figure out why my dvd player is being initialized randomly as if on startup or upon opening itunes. Icon is a document, believe it's a paired SSD with DVD.

Here I was thinking I had everything fairly well taken care of but now I'm getting a plethora of optional Windows Updates for Windows Server 2012 R2. I have no need for this kind of setup and I'm running basic 8.1. I have no idea why I'm getting these as optional updates and ... Read more

Read other answers