Over 1 million tech questions and answers.

Yoga 3 14 won't wake up from sleep !!!

Q: Yoga 3 14 won't wake up from sleep !!!

Hi all, Facts :Last august 30th, I ordered a Lenovo Yoga 3 14 (i5 / 8 / 256) from Amazon.It's been delivered one week ago (02/09/15).Two days ago (monday), I installed Kaspersky antivirus, downloaded the files for Windows 10, closed the screen and it went to sleep...And never woke up again ! I tried any and every keys / switches combo I thought of (power switch w/o volume switchs + and -, Novo switch, function keys, Ctrl/alt/ del, ctrl/shift/esc, escape, spacebar, enter... Right now, the power led is still on, the PC runs on battery and I'm waiting for it to run out of charge.I can hear and feel a very tiny ventilation from the back. The USB ports are active since my phone and an external HDD are plugged in them.The keyboard doesn't respond or enlight itself anymore. Despite all my tryings, I get no sound from the speakers... So I hope I will be able to reboot it and find a suitable solution (BIOS, driver update ?).The Yoga is new (one week old) and I'm yet already struggling to bring it back to life !!!!! Question :Is there any way to manually shut down the computer (the power switch for 60 sec doesn't work, the battery can't be taken out, no reset pin hole...) ? LENOVO, please HELP !!!!!I was so happy of this computer, don't let yous customer down. PS : As soon as the battery turns off, I'll try to save the PC and let you know how it goes.Sadly, I'm already considering to turn it back.

RELEVANCY SCORE 200
Preferred Solution: Yoga 3 14 won't wake up from sleep !!!

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Yoga 3 14 won't wake up from sleep !!!

Auto-reply.The PC ran out of battery.Once it's been plugged in again, it booted nicely.I'm now downloading Win10 and associate drivers.Wait and see... ++

Read other 9 answers
RELEVANCY SCORE 72

Hello, I have read other people having the same issue. Suggestion seems to be update the bios. But here it comes a second big issue, I can not update bios! I tried from "BIOS Update Utility for Windows 10 (64-bit), Windows 8.1 (64-bit), Windows 7 (32-bit, 64-bit) - Thin..." it starts the procedure but then it re-boots ending up in an (apparently) sleep state with the blinking led. The only way to start again is pressing the button for several seconds, but then once checking the current bios version I realize it did not really update.  I don't know how many times have tried this, getting crazy. Please help!

Read other answers
RELEVANCY SCORE 72

After a clean install of Windows 10 Anniversary edition, I had an issue with my Thinkpad Yoga not resuming from sleep, requiring a hard reboot every time. I made sure to perform the updates in the support article ThinkPad Yoga cannot wake up from sleep mode but those didn't help. The ultimate solution was to downgrade the Intel Management Engine Interface driver to the 9.x version from Lenovo's site. The default Windows 10 installation installed version 11.x of that driver, which apparently causes this issue with failing to resume. (Note that the Lenovo System Update tool does not identify this as a needed update since the Lenovo driver version is older, so you have to download and apply the older driver manually.) After doing this, the system now sleeps and resumes perfectly. Hopefully this can help someone else, and maybe the above support article could be updated to include this advice too.

Read other answers
RELEVANCY SCORE 72

Hello, I have read other people having the same issue. Suggestion seems to be update the bios. But here it comes a second big issue, I can not update bios! I tried from "BIOS Update Utility for Windows 10 (64-bit), Windows 8.1 (64-bit), Windows 7 (32-bit, 64-bit) - Thin..." it starts the procedure but then it re-boots ending up in an (apparently) sleep state with the blinking led. The only way to start again is pressing the button for several seconds, but then once checking the current bios version I realize it did not really update.  I don't know how many times have tried this, getting crazy. Please help!

Read other answers
RELEVANCY SCORE 72

my yoga 900 would not power up.  research found that the issue is a conflict between malware and windows 10.  The recommended fix was to hold the unit horizontally and press on the power button.  it worked! Question is - has this happened to you, and if so, how often?   

Read other answers
RELEVANCY SCORE 72

Hi everybody. This is just a public service message regarding an issue I've encountered. I've found that my Yoga 900 does not "wake up" after it has gone to sleep while connected to an external monitor. I'm connected to an HP 27VX monitor through a USB Type C to HDMI adapter. I found that my Yoga wakes up without issue if the display has turned off (power options turn off display settings) but it doesn't wake up if it goes to sleep when connected to the monitor. The issue though is not that it doesn't wake up, the issue is that for some reason when connected to the monitor it never truly goes to sleep (slow blinking white light). I think it gets hung up somehow when trying to go to sleep. When it enters this mode the power light is solid white and the only fix is to power cycle the Yoga. I'm not sure why it won't successfully go to sleep when connected to a monitor but my guess is some type of driver/hardware issue between the USB type C, HDMI adapter, and the monitor. I've verified that all works as intened when I'm not connected to the monitor. My workaround is to go to power options and turn my sleep option (when plugged in) to "Never". Not a solution by any means, just a workaround until all players involved (Lenovo, HP) figure out how to work with the new USB Type C port. Hope this helps. Rob











Solved!
Go to Solution.

A:Yoga 900 - Does Not Wake Up From Sleep When Connec...

I worked with Lenovo support and the issue was resolved after we updated the Intel HD Graphics 520 Display Adapter driver

Read other 9 answers
RELEVANCY SCORE 72

Question says it all for the most part.  Just got my Yoga 260.  Works great expect it will NEVER wake from sleep.  this is a huge problem obviously as I have to do a hard reboot by holding hte power button in until it dies then press again to boot the machine. power light blinks just as it should in sleep but nothing will allow it to wake except holding power button down doing a hard shutdown then reboot.  Anyone have a fix for this?  Thanks.

Read other answers
RELEVANCY SCORE 72

Hi All, Need help from those who are facing the same problem  Just bought Yoga 500 yesterday. Last night I used it untill the battery became 4% and automatically went to sleep mode. I charged it for 8 hours, as advised (that was my first time charging).  However, the machine still  in sleeping mode when I press power button to wake it up. Anyone having the same problem or have the solution? I tried to search and asked MR GOOGLE, but could't find any answer. Helppp... I need to prepare a very presentatation today.  Thanks

A:Lenovo Yoga 500 cannot wake up from sleep

Hi Lokman90,     
         
Welcome to the Forums  
 
As per the query we understood that you are facing issue with system not waking from sleep in your Lenovo yoga 500 notebook.
 
Try to reinstall the energy manager and check for the issue.
 
Click here for the energy manager for windows 10.
 
Let us know the result.
 
Best regards,         
 
Ashwin.S



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 71.2

My Yoga 500 ISK would sometimes not wake up from sleep.I mean, I can see the computer is working, I can hear it, but the screen is black and unresponsive. What happens is that I either leave it on and it goes to sleep on its own within 15 mins, or put it to sleep via start>power>sleep - it doesn't matter. Sometimes I press the power button and it wakes up fine, but sometime I get the black screen. My computer is up to date on the latest BIOS update (from today), Both Intel and nVidia graphics drivers are up to date, and in my power settings, my hard drive is set to not turn off ever. Does anyone know a solution to this problem??

A:Yoga 500 ISK Doesn't wake up from sleep properly -...

Hi there, I own the same model and I believe I have the same issue. Also I find booting up to be painfully slow. It gives me so much Apple Mac envy. I am almost certain the issue is with regard to the HDD itself, the WDC WD10S21X-24R1BT0-SSHD-8GB. It is used in many of the new-ish lenovo laptops including the Y50 touchscreen gaming computer. Many customers have complained about the SSHD, google that long model and you'll see loads of complaints on forums. I intend to open up my Yoga 500 ISK and replace the SSHD with what should be in there - an SSD. I shall let you know how I get on! Harry

Read other 5 answers
RELEVANCY SCORE 71.2

I am running the latest version of all patchs and BIOS available on Lenovo website and that is the problem, since I updated BIOS, the notebook come back from sleep mode.It goes into sleep mode as expected but when I try to brinr it back, red light goes on (as expected) but the screen keeps black.The only exit I found was to push ON botoon and hard restart it.Now why Lenovo delivered a BIOS version with this problem?Will I be obligated to come back to Dell?I have a 20FY0002US running Windows 10 - latest version - once I formated and reinstalled everything last week

Read other answers
RELEVANCY SCORE 71.2

Please help me to find a solution. I have a problem with SSD perfomance after wake up from sleep mode. The system is almost freezed for 3-5 minuts with SSD access time more then 1000 ms (usualy it is 3-5 mks) , and very low SSD speed, like 50-100 kb/sec (usualy it is 200-300 mb/sec. And then it is ok again. I can't understand, what is going on and how to find a solution? Did not find any similar on the forum or google.

Read other answers
RELEVANCY SCORE 71.2

Hi everyone,  My manager seems to be having an issue with his ThinkPad S1 Yoga ever since he upgraded to Windows 10 back in July. He's now running the TH2 update that was released last month and he is still having issues with Sleeping and Waking the Notebook.  When shutting down the computer it will not fully shut down, resulting in the battery draining and the little red light on the lid will blink very quickly - The only fix is to hard reset the PC by holding the power button.   When the Notebook is on battery power and goes to sleep for being idle - it cannot be woken up and the only way to get the PC to work again is to hard reset again - meaning he loses all his work.  Is there a permanent fix in the pipeline or is this a case of restoring back to Windows 8.1?  ThanksChris   

A:S1 Yoga: Windows 10 - Sleep/Wake Problems

Hi Chris-R
 
Can you please post your the full model number of the Yoga?
 
I have a TP Yoga 14 and it took me some time to stabilize the drivers. Maybe you should try to re-install the Lenovo Power related drivers to see if it can fix your problem.
 
I also like to have the drivers updated, I can share with your the following tips:
 
1) Try first Windows Update and update all the drivers and Patches
2) Try Lenovo System Update to get any new/missing drivers.
3) Try to install Lenovo Settings and Lenovo Companion from the Windows App Store, Lenovo Companion also has a "update driver search"
4) Sometimes all that software does not recognize some updated / missing driver. Check Lenovo's Support Site and search for your specific model drivers.
 
I hope this helps you or gives you a hint.
 
Regards
 

Read other 8 answers
RELEVANCY SCORE 71.2

Hi, I recently purchased a Thinkpad X1 Yoga, shipped on May 16, 2016.  I have an issue:     When I use the left side USB port (the one on the side of the power charging port) to charge my old Ipod and the laptop goes to sleep. The laptop does not wake up when opening the lid or pressing on the power button. However, as soon as I disconnect my Ipod from the USB port. The laptop immediately wakes up but unable to login using the fingerprint reader. Specific steps to reproduce: 1) Plug x1 yoga power cord to the laptop 2) Plug Ipod to the left side USB port. Make sure Ipod has no earphones plugged in. 3) Put the laptop in sleep mode 4) Close the lid of the laptop 5) Wait until iPod is no longer being charged by the laptop (a few seconds after the laptop goes to sleep) 6) Wait until iPod automically turns off on its own (it takes 15 to 30 mins, not sure exactly how much time.) 7) Open the laptop lid and notice that the laptop is not waking up. 8) Press on the "power" button on the right side of the X1 Yoga. Notice that the laptop does not wake up. 9) Remove the iPod from the USB port on the left side of the X1 Yoga.        Notice that the laptop is now able to wake up.        Also notice that the finger print reader is not responding. Cannot login using the fingerprint reader. Seems like a driver issue. Lenovo please confirm! ThanksWilly

Read other answers
RELEVANCY SCORE 71.2

I bought a new Thinkpad Yoga 14 (20DM/Broadwell). Gorgeous machine, but it refuses to wake from sleep on a keypress or click on the trackpad. It will wake up if I close and re-open it. I updated all of the drivers and the bios using Lenovo's utilities and Windows System Update. When that didn't work, I tried updating the Intel Integrated graphics drivers and GeForce drivers with the latest packages from Intel and NVIDIA, downgraded the Intel Management Engine to version 10, and disabled hybrid sleep. No dice. So I resorted to a clean re-install of Windows 10 from a USB key and updated all of the Lenovo drivers (again) using ThinkVantage System Update. "Allow this device to wake the computer" was and is checked in the Device Manager for both the keyboard and trackpad. Is there anything I can do to get it working? Only a couple days left to figure this out before my return period ends.

Read other answers
RELEVANCY SCORE 70.4

I have an X1 Yoga with a OneLink+ Dock. When the system goes to sleep, it won't wake. I have to hold the power button for 10 seconds to completely power off the X1, then restart it. I never have an issue when the OneLink+ is not connected. I updated the OneLink+'s firmware and all the drivers on the X1, but the problem remains. Anyone know how to fix this issue?

A:X1 Yoga won't wake from sleep when connected to OneLink+ Dock

Same issue here

Read other 2 answers
RELEVANCY SCORE 70.4

Hi,  Am facing this issue with X1 YOGA 1st generation, whenever it goes to sleep, i can not wake it up. Power button is blinking, also kepborad seems to be active as i can see it activating the backlights, mute /unmute mic.... etc Any help ? 

Read other answers
RELEVANCY SCORE 70.4

Hi everyone, when I wake my Yoga 900 from sleep mode, it takes around 6 seconds for the screen to turn back on. That's reasonable. My girlfriend's Yoga 900 however takes only 2 seconds, we bought them around the same time, same system etc. Also, since yesterday, when the screen goes black after the set time (e.g. 5 min) and I touch the touchpad or press any key it also takes around 7 seconds before the screen goes back on which is way too long since before it reacted alost instantaneously. What might be the issue? Could both things be connected somehow? Thanks for any help!

Read other answers
RELEVANCY SCORE 70.4

I am still fighting with "260 will not wake up from sleep problem" described in my post: https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/ThinkPad-Yoga-260-cannot-wake-up-from-s... I tried everything, fresh restore (5 times), boot from linux live, the laptop can't manage correct sleep, hybernation and even a simple shutdown. I can only switch on and off by pressing power button for more than 10 seconds. I tried to update the bios (from the lenovo website or from a bootable ISO) but it does just half of the job, when it tries to restart do finalize the process it goes again in a frozen state and can only restart by pressing power button for long time. Ok my laptop is out of warranty, but this has been clearly caused by a lenovo update, before that the lapotp was performing perfectly. There are several people with thinkpad reporting the same problem, lot of them with my same 260. The last one IDENTICAL problem 4 days ago: https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Yoga-260-Does-not-wake-up/m-p/3930549 This is unacceptable, I went to a lenovo assistance and they asked me 750euros to change the motherboard. WILL NEVER BUY ANOTHER LENOVO. I would like to hear an opinion from a Lenovo operator reading this forum, if any.

Read other answers
RELEVANCY SCORE 70.4

I have an X1 Yoga with a OneLink+ Dock. When the system goes to sleep, it won't wake. I have to hold the power button for 10 seconds to completely power off the X1, then restart it. I never have an issue when the OneLink+ is not connected. I updated the OneLink+'s firmware and all the drivers on the X1, but the problem remains. Anyone know how to fix this issue?

Read other answers
RELEVANCY SCORE 69.6

My Yoga 3 Pro won't wake up from sleep / hibernation, the only sign of activity is the keyboard lights just blinking, AGAIN! :-(. This is a common problem with Yoga 2 13 models I have learnt, not only from various boards, but also my self, when I returned a yoga 2 13 after 5 days, and got the Yoga 3 Pro model. The laptop is now only 6 months old. I experienced the same wake up problems 3 weeks ago with my 3 Pro, and the shop here in Copenhagen sent it back to service. When I got it back 4 days ago, the service team had just changed "Cinch Audio" and updated the BIOS. It seems like they never really fixed the real problem. Two days ago the computer again had problems to wake up, and now it seems to be frozen in this blinking mode. I I have tried hard reboot (holding the power button for ca 20 secs), but it won't solve the problem. Has anyone experienced the same problem, and any durable solutions to it? If it stays like this, I'll hand it in, try to get it reimbursed and I will gladly buy another computer, but not from Lenovo anymore. 

A:Lenovo Yoga 3 Pro won't wake up from sleep / hibernation, keyboard just blinking

My yoga 3 pro did that for quite some time and now won't even turn on!!! Right in time for my first few exams npnp

Read other 4 answers
RELEVANCY SCORE 69.6

It tends to happen after I let it sleep for long periods of time, but it never happens whenever login after being powered off. Does anyone know why this may be happening? It isn't particularly horrendous but it's annoying. The specific sound that it's happening to is the "asterisk" sound. 

Read other answers
RELEVANCY SCORE 68.8

For a couple of years I've my Yoga 900 laptop with 2(!) Dell P2415Q 4K monitors using a USB-C to MiniDP dongle. I was shocked the laptop could handle both of these monitors (combined resolution 7680x2160!), but it did just fine. I recently sold them and am now using the laptop with a single Dell U3417W widescreen monitor (resolution 3440x1440). For some reason, even though the new monitor has FAR fewer pixels that the two 4K monitors did combined, the laptop will now frequently get into a state (often after a sleep/wake cycle) where the screen starts blanking out every 3-5 seconds. Usually I can't get it to stop until I do a shutdown and cold restart of the laptop. I have the latest display driver available on Lenovo.com for this laptop. What's going on here, and how can I fix it? Thanks in advance for any help!

Read other answers
RELEVANCY SCORE 68.8

Hi, Anyone who has faced the below issue could please share the solution with me, been racking my brains around this one.The Yoga 520-14IKB just doesnt want to budge on waking up from sleep mode. Have to manually restart everytime I switch to sleep mode. Helpp....... Regards,Terry

Read other answers
RELEVANCY SCORE 68.8

Everything was going fine until the day I updated my 20FY to the latest BIOS version (R05ET75W); now as soon as it goes to sleep mode, the olnly way to wake it up is rebooting ang losing all the not saved work.Everytime it happens I regret the day I sold my Dell Vostro to buy this machine.

Read other answers
RELEVANCY SCORE 68.4

Over the past several years there are many posts of users experiencing variations on this problem with X1 Carbon and X1 Yoga of various generations, including the latest ones (I provide a list below). That is, the systems often cannot come out of sleep mode in some way, shape, or form. I had this problem on my own brand-new X1 Carbon 5th Generation, right out of the box. In my instance, I noticed this issue in the following two scenarios: -After having gone in to sleep mode, once I opened the lid, or press power button once:power light goes from blinking to solid onscreen stays blank/blackseems that if the machine is going to be in the frozen state, keyboard presses do not "unsleep" it (which they normally would). Closing the lid causes the power light to go to solid on, but then opening it again does nothing.in a couple of rarer instances, the machine actually did come out of sleep but then instantly the screen froze (but this was quite uncommon, mostly it just wouldn't come out of sleep at all)-After passing the initial boot screen of Lenovo, the next part shows the Lenovo logo but without the swirling dots and is frozen (the power light would show on)Under both conditions: The power light is solid onThe keyboard lights functionality works: backlighting, FnLock light, mute lightSometimes you can hear the fan workingPlugging in to external display does not display anything on itThe only way to rectify is to do a hard shutdown by holding the power key With... Read more

Read other answers
RELEVANCY SCORE 68

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 67.2

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 61.6

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers
RELEVANCY SCORE 61.2

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

A:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

Read other 1 answers
RELEVANCY SCORE 57.2

I have an issue with the sleep function. The computer does not awake from sleep. When I try to do it, it behaves as if it was waking, but it never ends and there is only a black screen; the mouse and keyboard are inoperative. The only thing possible to do is a hard reboot. When it boots, it shows a notice with a minute report (in the zip file) usually saying there was a blue screen, but I NEVER see any blue screen at all.

I know the power configuration is OK because I have always used the same scheme. A powercfg ?energy report shows several errors and warnings. They refer to USB and PCI (vendor 1002=ATI motherboard), but I don?t know how to repair them.

I downloaded the drivers downloader from Rrecipester.org and downloaded and installed the drivers. They are all Broadcom Corporation signed, the brand of my USB Bluetoth attachment. I rebooted after installing, as recommended. Run powercfg ?energy again and got the same report issues (in the zip file). I don?t think the processor utilization warnings to be very important because they are low and sporadic picks. It has been like this for some time now, so I don?t have a restore point. Can someone help and tell me what I can do so solve this issue, please?

Files uploaded in the attached zip:
. Windows warning after reboot
. Windows dump and xml files (2 = 1 each)
. Powercfg -energy report
I wanted to correct the thread title, but was unable to do it. Maybe someone else can do it.

A:No Wake From Sleep BlockedI have an issue with the sleep function. T

Quite confident it's a driver issue, it will be very difficult to troubleshoot from the one included dump file though as it's incomplete and inconclusive.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 000000000000109b, (reserved)
Arg3: 0000000004440006, Memory contents of the pool block
Arg4: fffffa8007c481b0, Address of the block of pool being deallocated

Debugging Details:
------------------

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Cannot get _POOL_TRACKER_BIG_PAGES type size
Cannot get _POOL_TRACKER_BIG_PAGES type size

POOL_ADDRESS: fffffa8007c481b0

BUGCHECK_STR: 0xc2_7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffffa80036544e0 to fffff800038c2d40

STACK_TEXT:
fffff800`00b9c360 fffffa80`036544e0 : 00000000`00000000 00000000`000007ff fffffa80`... Read more

Read other 9 answers
RELEVANCY SCORE 57.2

Whether I choose any option other than to turn PC off, instead of tapping spacebar on my MS wireless keyboard I have to tap the button for power on the tower, then the monitor turns on as the fan runs, but always a black screen. So then I have to do a manual boot and select to start normally.
 
Started a week ago, around the same time as a graphics card failure. I installed a new PNY GeForce, updated ALL drivers on my Gateway DX4710-UB301A, (Win 7 Home Premium 64-bit, AVG antivirus free 2014) played with power management and startup config settings, trolled forums, performed malware scans, and still can't figure out the issue. 
 
Please help!

Read other answers
RELEVANCY SCORE 51.6

help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..

A:Cant Wake From Sleep

  
Quote: Originally Posted by manusdn7


help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..



Hi manusdn7 and welcome

The windows memory test does not stress your memory enough to tell, plus it is run from within windows.

You need to run memtestx86

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember that memtest errors can be either memory or bad motherboard slots so you may have to test memory one stick at a time, and the slots with known good memory.

Let us know if you need further assistance
Jan

Read other 5 answers
RELEVANCY SCORE 51.6

Having struggled to get my computer to sleep -

When I do a wake up from 'Sleep' I get - Windows did not shut down correctly.
It then offers the 'Safe Options' list,

Anyone know why it does this?

A:Wake up from sleep

Does the power remain connected to the PC?

Read other 5 answers
RELEVANCY SCORE 51.6

Hi group,When my PC (HP Pavilion) goes into "idle" - when I'm not using it - it will not wake back up. I get no video, and sometimes my mouse will not wake up either. When I disconnect my power cord and reconnect the computer, I am able to boot up and things work. The computer works fine as long as I don't let it go to idle. For example, when I shut it down, it will boot up fine the next time. This just started happening recently after two updates: one from Norton, and the other from Quicken. I have no idea whether one of these caused the problem. I keep my PC well-maintained with all the latest updates. I have run the power troubleshooter, as well as the updates troubleshooter, and both detected no problems. Open to any ideas you may have,Thanks,Jeff

Read other answers
RELEVANCY SCORE 51.6

Hi All,
   My boss just bought a XPS 15 9550 last September.  There are a few cases each week that it does not wake up from sleep.  All drivers are up to date.  I did an online check with Dell for hardware check and all seems fine.
The computer goes into some state that the screen is black, the computer is running and there is nothing else but holding the power button down to restart it.

It's frustrating. 

A:Cant wake up from Sleep

Hi,
Thank you for writing to us!
We would like to apologize for the inconvenience caused.
In this case we would suggest you to update the BIOS to the latest version. Also update the chipset drivers on the system ( un-install -> restart system -> install ).
Kindly private message the service tag and email address.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 51.6

Greetings.  I have a T61 that won't wake from sleep. Situation:Put PC to "sleep" using Fn+F4, closing lid or let it go to "sleep" via system timerPC will not wake upon opening lid, using Fn+F4 or power button.We're forced to either 1) hold down power button (which forces a reboot), or 2) (when that fails), unplug from wall AND remove battery.System:T61, 7664 RYU, Bios 7LETC6WW (2.26)VistaAll Microsoft and Lenovo patches installed and current Notes:Don't have a restore point we can refer back to.Don't want to have to burn it down and start over.My hunch is that there is a conflict somewhere in the registry (maybe between what the bios thinks and what the registry has)?I'll PayPal you $25 if your solution fixes it....  Seriously. Many thanks.  

A:T61 Won't Wake From Sleep

Hi, I have the same problem and have tried all the fixes...none work.  If you get a solution please let me know! Thanks,[email protected]

Read other 4 answers
RELEVANCY SCORE 51.6

1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks

A:Cannot wake from S3 Sleep

  
Quote: Originally Posted by johnhoh


1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks


Hi,

Try Standby Tool, it solved all my S3 problems.
Here is the version for Win7.
In the post you'll see "mst09098.exe".

http://www.degroeneknop.nl/forum/ind....htm... Read more

Read other 4 answers
RELEVANCY SCORE 51.6

Hi Guys/Gals

Never use sleep function but last night instead of selecting shutdown hit sleep by mistake. Couldn't get system to wake from sleep and had to turn off by holding power button.

Today when switching system back on i get fan & case lights on , hdd and dvd activity. The keyboard is unresponsive (no lights) and monitor remains in stand by. Mouse gets power but doesn't wake pc.

Using reset or power button on case just restarts system to exact condition above.

Can't contact pc manufacturer til monday (pc 4 months old). Read quite a few other posts regarding vista sleep issues but haven't found anything that would seem to rectify this problem.

Any comments/tips gratefully recieved

Karlos

A:Can't Wake PC From Sleep

Well I'm a beginner but I had a lesser important case than yours. I found you interupt a process of sleep if you try to wake it before about 5 seconds. Anyway, there are a couple of things you can try.

Unplug the power cord and plug it back in.

Pull out the wall socket thingy and put it back in.

Try doing something like booting into safe mode if you can.
The pc maybe still functioning but the monitor can't interact with it. Once you try to boot it, keep pressing F8 for about 10 seconds and then press enter. See if anything happens.

Could also be a shortcircut or something. Other people have had a similar problem.

Read other 12 answers
RELEVANCY SCORE 51.6

Hi,

Hoping someone can help me with this.

I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP.

To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password.

I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.

Thanks in advance.


Rich

A:PC Won't wake from sleep

Mine is the same and takes about 2 and a half mins to wake up

I have my bios set to wake up on double mouse click, it does wake up eventually

Should be fixed in the official release!!

Read other 9 answers
RELEVANCY SCORE 51.6

Since installing SP1 my computer has been acting like a one year old. When I put it to sleep at night it keeps waking and then goes to sleep only to wake again. Left untouched it went through this cycle all night. Starts 20 seconds after I put it to sleep and stays on for 2 minutes and then goes to sleep for 20 seconds then wake for two minutes etc etc etc.I disconnected a flash drive that I had in a USB port.
I disabled "wake timers" under Sleep in Power Options
I disabled "allow this device to wake the computer" in the properties of the USB wireless mouse
In the properties for the network adapter under the "Advanced" tab I disabled the "Wake on Settings". That fixed the problem but then I couldn't wake my computer with Logmein and I think Orb is disabled.
Noticed when I went back that there's another tab "Power Control" for network adapter. I disabled "allow this device to wake the computer" and changed the Advanced tab "Wake on setting" to "OS controlled".
Now when I put it to sleep it seems to stay down. I'll update tomorrow if it misbehaves tonight.

A:Sleep Wake Sleep Wake

If you think it might be the network card, you can always open a cmd prompt and run powercfg -lastwake to see which device was logged as waking the machine last.

Read other 3 answers
RELEVANCY SCORE 51.6

So it sleeps no bother normally but it seems that if my htpc has woken it with a wol magic packet, it will not go back to sleep , ever unless manually put to sleep. Rebooting and automatic sleep works again. I recently reinstalled windows and have looked atvevery setting I can think of. Including unattended sleep timeoutvin gpedit which I have tried not config and set to one min. Powercfg shows nothing.

A:no sleep after wake on lan

I have been searching the internet and it seems that this situation is unique.

To clarify, sleep works fine but if the computer is woken with a magic packet from any source it does not then go back to sleep after inactivity. Even the monitor stays on.

In gpedit I have tried disabling allow applications to prevent sleep under power options with no change.

Anybody got any ideas, this is driving me crackers!

Read other 9 answers
RELEVANCY SCORE 51.6

Hi, I was wondering if anybody has had this problem before?

My computer was put to sleep earlier on today, and I moved the mouse to turn it back on. The power light went from orange (sleep mode) to blue (powered on). Nothing was displayed on the machine. Bashed some buttons, nothing happened, so did a hard reboot.

The power button went red (which happens if I hard reboot it) then to blue but that's it. The fans and hard drive starts going, but no beeps, no POST, no display. Nothing.

Already, I've tried:

- Reseating my RAM sticks - nothing
- Unplugging the hard drive - bf actually broke a sata slot, although he says it was lose before. The pins are not straight now and I can't get the black slot back onto the mobo. Plugged hard drive into sata 2 slot, still get no reaction.

Anything else I can try?
 

A:Can't wake up from sleep.

Try clearing CMOS, see if that helps.

http://time4tech.com/article25.html
 

Read other 3 answers
RELEVANCY SCORE 51.6

My Vista PC keeps going into sleep mode, or closes down. When I start it up again, it gets to a black screen saying continue restore, or re-start. Sometimes I get a blue screen with some sort of loading message on it, but on re-booting, it's ok. I 'googled' the sleep mode problem, and on one link it said it is commonly and registry error, and I needed to download a program to fix it. Can anyone help with the solution. Thanks.
 

A:Wake from sleep

Read other 7 answers
RELEVANCY SCORE 51.6

Hi all,
I have win 7 x64 running on a custom built machine. Every now and then the machine freezes up when I try to wake it up from sleep (usually overnight). I have not made changes to make it hybernate. I experienced this again last night and am wondering if I could get some help analyzing this minidump as I don't know how to analyze it.

Any help will be appreciated.

Thanks!

A:win 7 won't wake up after sleep

Hello IndianinIA,

I wonder if that was caused by your network driver. Try uninstalling and reinstalling that driver, e1e6032e.sys, and make sure that you get the latest version.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\020810-18921-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a00000 PsLoadedModuleList = 0xfffff800`02c3de50
Debug session time: Sun Feb 7 23:28:12.828 2010 (GMT-5)
System Uptime: 0 days 13:16:53.125
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 51.6

Hi guys, srry haven't been to tech support guy for awhile, in case if i miss any information, feel free to remind me
and i'll post it asap.

My laptop is about 2 years old (Acer Aspire 6920), one day like any normal day i was away from my laptop
and it went to sleep. The next time i was using it i tried to wake it up, it froze for around 10 mins, so i tried to
restart it and the next thing i knew it only starts up to "startup repair". Any attempts to access safe mode to
debug the computer has failed and since then the laptop has gone on a loop -->fail to repair in startup repair
--> restart computer again --> running startup repair. So i decided to reinstall the OS.

after reformatting and reinstalling windows 7 to my laptop though, i seem to encounter a similar error. The laptop
seems to work fine although whenever it goes to sleep and i try to wake it up, the screen froze and starts
flashing and the laptop wont work until you restart the computer again. I made my second attempt to reinstall
a new OS to the system and the same error occurred. My laptop has the latest bios and i tried various versions
of drivers for my graphics card (intel 965 chipset) and the problem continues to persist.

I was wondering if there's any program to debug this error or whether this is a hardware error that i can somehow detect.

Thanks!

Acer Aspire 6920
Windows 7 32 bit operation system
 

A:Cant Wake up from Sleep

bump
 

Read other 1 answers